Anda sedang offline saat ini, menunggu internet Anda untuk menyambung kembali

Cara membuat kotak pesan "catchall" wastafel untuk Exchange Server

PENTING: Artikel ini diterjemahkan menggunakan perangkat lunak mesin penerjemah Microsoft dan bukan oleh seorang penerjemah. Microsoft menawarkan artikel yang diterjemahkan oleh seorang penerjemah maupun artikel yang diterjemahkan menggunakan mesin sehingga Anda akan memiliki akses ke seluruh artikel baru yang diterbitkan di Pangkalan Pengetahuan (Knowledge Base) dalam bahasa yang Anda gunakan. Namun, artikel yang diterjemahkan menggunakan mesin tidak selalu sempurna. Artikel tersebut mungkin memiliki kesalahan kosa kata, sintaksis, atau tata bahasa, hampir sama seperti orang asing yang berbicara dalam bahasa Anda. Microsoft tidak bertanggung jawab terhadap akurasi, kesalahan atau kerusakan yang disebabkan karena kesalahan penerjemahan konten atau penggunaannya oleh para pelanggan. Microsoft juga sering memperbarui perangkat lunak mesin penerjemah.

Klik disini untuk melihat versi Inggris dari artikel ini:324021
RINGKASAN
Artikel ini menjelaskan cara membuat acara wastafel untuk menangkap semua pesan e-mail yang dikirim ke domain tertentu, dan kemudian mengarahkan mereka ke satu kotak pesan.

Catatan Wastafel acara sampel yang dijelaskan dalam artikel ini pengalihan semua pesan e-mail yang dikirim ke domain. Untuk informasi tentang cara membuat lebih kompleks peristiwa tenggelam, lihat Exchange Software Development Kit (SDK).

Membuat file skrip

Membuat script lima berikut, dan kemudian menyimpannya di folder di komputer Exchange.

Microsoft menyediakan contoh pemrograman hanya sebagai ilustrasi, tanpa jaminan apa pun baik tersurat maupun tersirat. Termasuk, namun tidak terbatas pada, jaminan tersirat mengenai kelayakan untuk diperdagangkan atau kesesuaian untuk keperluan tertentu. Artikel ini mengasumsikan bahwa Anda telah terbiasa dengan bahasa pemrograman yang ditunjukkan dan dengan alat yang digunakan untuk membuat dan mendebug prosedur. Teknisi dukungan Microsoft dapat membantu menjelaskan fungsionalitas prosedur tertentu, namun mereka tidak akan memodifikasi contoh untuk memberikan fungsionalitas tambahan atau menyusun prosedur untuk memenuhi persyaratan khusus Anda.

Catchall.CMD

Berkas Catchall.cmd panggilan SMTPReg.vbs script dan register Catchall acara wastafel. Untuk membuat file .cmd ini, ikuti langkah berikut:
  1. Ketik atau tempel kode berikut ke editor teks, seperti sebagai Notepad:
    cscript smtpreg.vbs /add 1 onarrival SMTPScriptingCatchAll CDO.SS_SMTPOnArrivalSink "mail from=*"cscript smtpreg.vbs /setprop 1 onarrival SMTPScriptingCatchAll Sink ScriptName d:\mec\catchall\catchall.vbscscript smtpreg.vbs /delprop 1 onarrival SMTPScriptingCatchAll Source Rule						
    Catatan Mengubah path ke file Catchall.vbs untuk mencerminkan folder lokasi file Catchall.
  2. Simpan berkas sebagaiCatchall.CMD.

ENUM.CMD

Jalankan Enum.cmd untuk daftar peristiwa tenggelam yang terdaftar pada server. Untuk membuat berkas ini, ikuti langkah berikut:
  1. Ketik atau tempel kode berikut ke editor teks, seperti sebagai Notepad:
    cscript smtpreg.vbs /enum |more					
  2. Simpan berkas sebagaiENUM.CMD.

Catchall.VBS

Catchall.vbs ini digunakan untuk membuat Catchall account. Menyesuaikan file ini untuk lingkungan Exchange Server Anda.
  1. Ketik atau tempel kode berikut ke editor teks, seperti sebagai Notepad. Simpan file ini sebagai Catchall.VBS.
    <SCRIPT LANGUAGE="VBSCRIPT">'' For information about this namespace, see '   http://msdn.microsoft.com/library/default.asp?url=/library/en-us/cdosys/html/_cdosys_schema_smtpenvelope.asp'Const RECIP_LIST = "http://schemas.microsoft.com/cdo/smtpenvelope/recipientlist"'' For information about the CdoEventStatus enumeration, see '   http://msdn.microsoft.com/library/default.asp?url=/library/en-us/cdosys/html/_cdosys_cdoeventstatus_enum.asp'Const CDO_RUN_NEXT_SINK = 0'' OnArrival sink entry point'Sub ISMTPOnArrival_OnArrival(ByVal Msg, EventStatus)  On Error Resume Next  Dim objFields    Set objFields = Msg.EnvelopeFields  objFields(RECIP_LIST).Value = FixupRecipList(objFields(RECIP_LIST).Value)  objFields.Update    Msg.DataSource.Save ' Commit changes  EventStatus = CDO_RUN_NEXT_SINKEnd Sub''  Change any @example.com recipient(s) to bob@company.com'Function FixupRecipList(strList)  On Error Resume Next  Dim strFixedList  Dim nDomainPart  Dim nNamePart  Dim nNextAddress  strFixedList = strList  While (InStr(LCase(strFixedList),"@example.com"))    nDomainPart = InStr(LCase(strFixedList),"@example.com")    nNamePart = InStrRev(strFixedList,";",nDomainPart)    nNextAddress = InStr(nDomainPart+Len("@example.com;"),strFixedList,"SMTP:")    If (0 = nNamePart) Then      ' @example.com is first name in recipient list      If (0 = nNextAddress) Then        ' @example.com is the last name in the recipient list        strFixedList = "SMTP:bob@company.com;"      Else        ' @example.com is not the last name in the recipient list        strFixedList = "SMTP:bob@company.com;" & Right(strFixedList,Len(strFixedList)-nNextAddress+1)      End If    Else      ' @example.com is not the first name in recipient list      If (0 = nNextAddress) Then        ' @example.com is the last name in the recipient list        strFixedList = Left(strFixedList,nNamePart) & "SMTP:bob@company.com;"      Else        ' @example.com is not the last name in the recipient list        strFixedList = Left(strFixedList,nNamePart) & "SMTP:bob@company.com;" & Right(strFixedList,Len(strFixedList)-nNextAddress+1)      End If    End If  Wend  FixupRecipList = strFixedListEnd Function</SCRIPT>					
  2. Mengedit file Catchall.vbs untuk menggantikan kemunculan@example.com dengan@yourdomain.com, di manayourdomain.com adalah domain dari yang Anda ingin mengarahkan ulang pesan e-mail.
  3. Mengganti semua kejadian Bob@Company.comdengan alamat SMTP kotak pesan yang Anda ingin mengarahkan semua e-mail pesan untuk domain yang Anda tentukan pada langkah 2.

    Catatan Alamat e-mail yang Anda ingin mengarahkan semua e-mail harus dari domain yang berbeda dari domain yang Anda ingin mengalamatkan pesan e-mail. Misalnya, jika domain yang Anda tetapkan dalam Langkah 2 @Company.com, e-mail alamat yang Anda tentukan pada langkah 3 tidak dapatBob@Company.com. Jika domain yang sama, pesan akan terus diulang dan akhirnya akan kembali ke pengirim sebagai pesan tidak terkirim.

    Jika penerima harus alamat e-mail di catchall domain (domain yang ingin Anda mengarahkan ulang pesan e-mail), sepertiBob@Company.com, menambahkan domain tambahan seperti @Company.local kebijakan penerima untuk pengguna, Kemudian tambahkan alamat SMTP Bob@Company.local untuk alamat e-mail pengguna. AlamatBob@Company.local dapat digunakan sebagai e-mail alamat untuk menentukan pada langkah 3.

SMTPReg.vbs

Membuat script untuk mendaftar Catchall acara wastafel. Untuk melakukan hal ini, Ikuti langkah berikut:
  1. Ketik atau tempel kode berikut ke editor teks, seperti sebagai Notepad:
    'THIS CODE AND INFORMATION IS PROVIDED "AS IS" WITHOUT 'WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, 'INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES 'OF MERCHANTABILITY AND/OR FITNESS FOR A PARTICULAR 'PURPOSE'------------------------------------------------------------------------------'FILE DESCRIPTION: Script for registering for SMTP Protocol sinks. ''File Name: smtpreg.vbs' '' Copyright (c) Microsoft Corporation 1993-1998. All rights reserved.'------------------------------------------------------------------------------Option Explicit''' the OnArrival event GUIDConst GUIDComCatOnArrival = "{ff3caa23-00b9-11d2-9dfb-00C04FA322BA}"' the SMTP source typeConst GUIDSourceType = "{FB65C4DC-E468-11D1-AA67-00C04FA345F6}"' Const GUIDCat = "{871736c0-fd85-11d0-869a-00c04fd65616}"Const GUIDSources = "{DBC71A31-1F4B-11d0-869D-80C04FD65616}"' the SMTP service display name.  This is used to key which service to' editConst szService = "smtpsvc"' the event manager object.  This is used to communicate with the ' event binding database.Dim EventManagerSet EventManager = WScript.CreateObject("Event.Manager")'' register a new sink with event manager'' iInstance - the instance to work against' szEvent - OnArrival' szDisplayName - the display name for this new sink' szProgID - the progid to call for this event' szRule - the rule to set for this event'public sub RegisterSink(iInstance, szEvent, szDisplayName, szProgID, szRule)	Dim SourceType	Dim szSourceDisplayName	Dim Source	Dim Binding	Dim GUIDComCat	Dim PrioVal	' figure out which event they are trying to register with and set	' the comcat for this event in GUIDComCat	select case LCase(szEvent)		case "onarrival"			GUIDComCat = GUIDComCatOnArrival		case else			WScript.echo "invalid event: " & szEvent			exit sub	end select	' enumerate through each of the registered instances for the SMTP source	' type and look for the display name that matches the instance display	' name	set SourceType = EventManager.SourceTypes(GUIDSourceType)	szSourceDisplayName = szService & " " & iInstance	for each Source in SourceType.Sources		if Source.DisplayName = szSourceDisplayName then			' You have found the instance that you want. Now add a new binding			' with the right event GUID.  by not specifying a GUID to the			' Add method you get server events to create a new ID for this			' event			set Binding = Source.GetBindingManager.Bindings(GUIDComCat).Add("")			' set the binding properties			Binding.DisplayName = szDisplayName			Binding.SinkClass = szProgID			' register a rule with the binding			Binding.SourceProperties.Add "Rule", szRule			' register a priority with the binding			PrioVal = GetNextPrio(Source, GUIDComCat)			If PrioVal < 0 then				WScript.Echo "assigning priority to default value (24575)"				Binding.SourceProperties.Add "Priority", 24575			else					WScript.Echo "assigning priority (" & PrioVal & " of 32767)"				Binding.SourceProperties.Add "Priority", PrioVal			end if			' save the binding			Binding.Save			WScript.Echo "registered " & szDisplayName			exit sub		end if	nextend sub'' iterate through the bindings in a source, find the binding' with the lowest priority, and return the next priority value.' If the next value exceeds the range, return -1.'public function GetNextPrio(oSource, GUIDComCat)	' it's possible that priority values will not be	' numbers, so you add error handling for this case	on error resume next	Dim Bindings	Dim Binding	Dim nLowestPrio	Dim nPrioVal	nLowestPrio = 0	set Bindings = oSource.GetBindingManager.Bindings(GUIDComCat)	' if the bindings collection is empty, then this is the first	' sink. It receives the highest priority (0).	if Bindings.Count = 0 then		GetNextPrio = 0	else		' get the lowest existing priority value		for each Binding in Bindings			nPrioVal = Binding.SourceProperties.Item("Priority")			if CInt(nPrioVal) > nLowestPrio then				if err.number = 13 then					err.clear				else					nLowestPrio = CInt(nPrioVal)				end if			end if		next 		' assign priority values in increments of 10 so priorities		' can be shuffled later without the need to reorder all		' binding priorities.  Valid priority values are 0 - 32767		if nLowestPrio + 10 > 32767 then			GetNextPrio = -1		else			GetNextPrio = nLowestPrio + 10		end if	end ifend function  '' Search for a previously registered sink with the passed in name'' iInstance - the instance to work against' szEvent - OnArrival' szDisplayName - the display name of the event to check' bCheckError - Any errors returnedpublic sub CheckSink(iInstance, szEvent, szDisplayName, bCheckError)	Dim SourceType	Dim GUIDComCat	Dim szSourceDisplayName	Dim Source	Dim Bindings	Dim Binding	bCheckError = FALSE	select case LCase(szEvent)		case "onarrival"			GUIDComCat = GUIDComCatOnArrival		case else			WScript.echo "invalid event: " & szEvent			exit sub	end select	' find the source for this instance	set SourceType = EventManager.SourceTypes(GUIDSourceType)	szSourceDisplayName = szService & " " & iInstance	for each Source in SourceType.Sources		if Source.DisplayName = szSourceDisplayName then			' find the binding by display name.  to do this, enumerate			' all of the bindings and try to match on the display name			set Bindings = Source.GetBindingManager.Bindings(GUIDComCat)			for each Binding in Bindings				if Binding.DisplayName = szDisplayName then					' you have found the binding, now log an error					WScript.Echo "Binding with the name " & szDisplayName & " already exists"					exit sub 				end if			next		end if	next	bCheckError = TRUEend sub'' unregister a previously registered sink'' iInstance - the instance to work against' szEvent - OnArrival' szDisplayName - the display name of the event to remove'public sub UnregisterSink(iInstance, szEvent, szDisplayName)	Dim SourceType	Dim GUIDComCat	Dim szSourceDisplayName	Dim Source	Dim Bindings	Dim Binding	select case LCase(szEvent)		case "onarrival"			GUIDComCat = GUIDComCatOnArrival		case else			WScript.echo "invalid event: " & szEvent			exit sub	end select	' find the source for this instance	set SourceType = EventManager.SourceTypes(GUIDSourceType)	szSourceDisplayName = szService & " " & iInstance	for each Source in SourceType.Sources		if Source.DisplayName = szSourceDisplayName then			' find the binding by display name.  to do this, enumerate			' all of the bindings and try to match on the display name			set Bindings = Source.GetBindingManager.Bindings(GUIDComCat)			for each Binding in Bindings				if Binding.DisplayName = szDisplayName then					' you have found the binding, now remove it					Bindings.Remove(Binding.ID)					WScript.Echo "removed " & szDisplayName & " " & Binding.ID				end if			next		end if	nextend sub'' add or remove a property from the source or sink propertybag for an event'' iInstance - the SMTP instance to edit' szEvent - the event type (OnArrival)' szDisplayName - the display name of the event' szPropertyBag - the property bag to edit ("source" or "sink")' szOperation - "add" or "remove"' szPropertyName - the name to edit in the property bag' szPropertyValue - the value to assign to the name (ignored for remove)'public sub EditProperty(iInstance, szEvent, szDisplayName, szPropertyBag, szOperation, szPropertyName, szPropertyValue)	Dim SourceType	Dim GUIDComCat	Dim szSourceDisplayName	Dim Source	Dim Bindings	Dim Binding	Dim PropertyBag	select case LCase(szEvent)		case "onarrival"			GUIDComCat = GUIDComCatOnArrival		case else			WScript.echo "invalid event: " & szEvent			exit sub	end select	' find the source for this instance	set SourceType = EventManager.SourceTypes(GUIDSourceType)	szSourceDisplayName = szService & " " & iInstance	for each Source in SourceType.Sources		if Source.DisplayName = szSourceDisplayName then			set Bindings = Source.GetBindingManager.Bindings(GUIDComCat)			' find the binding by display name.  to do this, enumerate			' all of the bindings and try to match on the display name			for each Binding in Bindings				if Binding.DisplayName = szDisplayName then					' figure out which set of properties you want to modify					' based on the szPropertyBag parameter					select case LCase(szPropertyBag)						case "source"							set PropertyBag = Binding.SourceProperties						case "sink"							set PropertyBag = Binding.SinkProperties						case else							WScript.echo "invalid propertybag: " & szPropertyBag							exit sub					end select					' figure out what operation you want to perform					select case LCase(szOperation)						case "remove"							' they want to remove szPropertyName from the							' property bag							PropertyBag.Remove szPropertyName							WScript.echo "removed property " & szPropertyName						case "add"							' add szPropertyName to the property bag and 							' set its value to szValue.  if this value							' already exists then this will change  the value							' it to szValue.							PropertyBag.Add szPropertyName, szPropertyValue							WScript.echo "set property " & szPropertyName & " to " & szPropertyValue						case else							WScript.echo "invalid operation: " & szOperation							exit sub					end select					' save the binding					Binding.Save				end if			next		end if	nextend sub'' this helper function takes an IEventSource object and a event category' and dumps all of the bindings for this category under the source'' Source - the IEventSource object to display the bindings for' GUIDComCat - the event category to display the bindings for'public sub DisplaySinksHelper(Source, GUIDComCat)	Dim Binding	Dim propval	' walk each of the registered bindings for this component category	for each Binding in Source.GetBindingManager.Bindings(GUIDComCat)		' display the binding properties		WScript.echo "    Binding " & Binding.ID & " {"		WScript.echo "      DisplayName = " & Binding.DisplayName		WScript.echo "      SinkClass = " & Binding.SinkClass		if Binding.Enabled = True then			WScript.echo "      Status = Enabled"		else			WScript.echo "      Status = Disabled"		end if		' walk each of the source properties and display them		WScript.echo "      SourceProperties {"		for each propval in Binding.SourceProperties			WScript.echo "        " & propval & " = " & Binding.SourceProperties.Item(propval)		next		WScript.echo "      }"		' walk each of the sink properties and display them		WScript.echo "      SinkProperties {"		for each Propval in Binding.SinkProperties			WScript.echo "        " & propval & " = " & Binding.SinkProperties.Item(Propval)		next		WScript.echo "      }"		WScript.echo "    }"	nextend sub'' dumps all of the information in the binding database related to SMTP'public sub DisplaySinks	Dim SourceType	Dim Source	' look for each of the sources registered for the SMTP source type	set SourceType = EventManager.SourceTypes(GUIDSourceType)	for each Source in SourceType.Sources		' display the source properties		WScript.echo "Source " & Source.ID & " {"		WScript.echo "  DisplayName = " & Source.DisplayName		' display all of the sinks registered for the OnArrival event		WScript.echo "  OnArrival Sinks {"		call DisplaySinksHelper(Source, GUIDComCatOnArrival)		WScript.echo "  }"	nextend sub'' enable/disable a registered sink'' iInstance - the instance to work against' szEvent - OnArrival' szDisplayName - the display name for this new sink'public sub SetSinkEnabled(iInstance, szEvent, szDisplayName, szEnable)	Dim SourceType	Dim GUIDComCat	Dim szSourceDisplayName	Dim Source	Dim Bindings	Dim Binding	select case LCase(szEvent)		case "onarrival"			GUIDComCat = GUIDComCatOnArrival		case else			WScript.echo "invalid event: " + szEvent			exit sub	end select	' find the source for this instance	set SourceType = EventManager.SourceTypes(GUIDSourceType)	szSourceDisplayName = szService + " " + iInstance	for each Source in SourceType.Sources		if Source.DisplayName = szSourceDisplayName then			' find the binding by display name.  to do this, enumerate			' all of the bindings and try to match on the display name			set Bindings = Source.GetBindingManager.Bindings(GUIDComCat)			for each Binding in Bindings				if Binding.DisplayName = szDisplayName then					' You have found the binding, now enable/disable it					' You do not need "case else' because szEnable's value					' is set internally, not by users					select case LCase(szEnable)						case "true"							Binding.Enabled = True							Binding.Save							WScript.Echo "enabled " + szDisplayName + " " + Binding.ID						case "false"							Binding.Enabled = False							Binding.Save							WScript.Echo "disabled " + szDisplayName + " " + Binding.ID						end select				end if			next		end if	nextend sub' ' display usage information for this script'public sub DisplayUsage	WScript.echo "usage: cscript smtpreg.vbs <command> <arguments>"	WScript.echo "  commands:"	WScript.echo "    /add <Instance> <Event> <DisplayName> <SinkClass> <Rule>"	WScript.echo "    /remove <Instance> <Event> <DisplayName>"	WScript.echo "    /setprop <Instance> <Event> <DisplayName> <PropertyBag> <PropertyName> "	WScript.echo "             <PropertyValue>"	WScript.echo "    /delprop <Instance> <Event> <DisplayName> <PropertyBag> <PropertyName>"	WScript.echo "    /enable <Instance> <Event> <DisplayName>"	WScript.echo "    /disable <Instance> <Event> <DisplayName>"	WScript.echo "    /enum"	WScript.echo "  arguments:"	WScript.echo "    <Instance> is the SMTP instance to work against"	WScript.echo "    <Event> can be OnArrival"	WScript.echo "    <DisplayName> is the display name of the event to edit"	WScript.echo "    <SinkClass> is the sink class for the event"	WScript.echo "    <Rule> is the rule to use for the event"		WScript.echo "    <PropertyBag> can be Source or Sink"	WScript.echo "    <PropertyName> is the name of the property to edit"	WScript.echo "    <PropertyValue> is the value to assign to the property"end subDim iInstanceDim szEventDim szDisplayNameDim szSinkClassDim szRuleDim szPropertyBagDim szPropertyNameDim szPropertyValuedim bCheck'' this is the main body of our script.  it reads the command line parameters' specified and then calls the appropriate function to perform the operation'if WScript.Arguments.Count = 0 then	call DisplayUsageelse 	Select Case LCase(WScript.Arguments(0))		Case "/add"			if not WScript.Arguments.Count = 6 then				call DisplayUsage			else				iInstance = WScript.Arguments(1)				szEvent = WScript.Arguments(2)				szDisplayName = WScript.Arguments(3)				szSinkClass = WScript.Arguments(4)				szRule = WScript.Arguments(5)				call CheckSink(iInstance, szEvent, szDisplayName, bCheck)				if bCheck = TRUE then					call RegisterSink(iInstance, szEvent, szDisplayName, szSinkClass, szRule)				End if			end if		Case "/remove"			if not WScript.Arguments.Count = 4 then				call DisplayUsage			else				iInstance = WScript.Arguments(1)				szEvent = WScript.Arguments(2)				szDisplayName = WScript.Arguments(3)				call UnregisterSink(iInstance, szEvent, szDisplayName)			end if			Case "/setprop"			if not WScript.Arguments.Count = 7 then				call DisplayUsage			else				iInstance = WScript.Arguments(1)				szEvent = WScript.Arguments(2)				szDisplayName = WScript.Arguments(3)				szPropertyBag = WScript.Arguments(4)				szPropertyName = WScript.Arguments(5)				szPropertyValue = WScript.Arguments(6)				call EditProperty(iInstance, szEvent, szDisplayName, szPropertyBag, "add", szPropertyName, szPropertyValue)			end if		Case "/delprop"			if not WScript.Arguments.Count = 6 then				call DisplayUsage			else				iInstance = WScript.Arguments(1)				szEvent = WScript.Arguments(2)				szDisplayName = WScript.Arguments(3)				szPropertyBag = WScript.Arguments(4)				szPropertyName = WScript.Arguments(5)				call EditProperty(iInstance, szEvent, szDisplayName, szPropertyBag, "remove", szPropertyName, "")					end if		Case "/enable"			if not WScript.Arguments.Count = 4 then				call DisplayUsage			else				iInstance = WScript.Arguments(1)				szEvent = WScript.Arguments(2)				szDisplayName = WScript.Arguments(3)				call SetSinkEnabled(iInstance, szEvent, szDisplayName, "True")			end if		Case "/disable"			if not WScript.Arguments.Count = 4 then				call DisplayUsage			else				iInstance = WScript.Arguments(1)				szEvent = WScript.Arguments(2)				szDisplayName = WScript.Arguments(3)				call SetSinkEnabled(iInstance, szEvent, szDisplayName, "False")			end if		Case "/enum"			if not WScript.Arguments.Count = 1 then				call DisplayUsage			else				call DisplaySinks			end if		Case Else			call DisplayUsage	End Selectend if					
  2. Simpan berkas sebagaiSmtpreg.VBS.

Removecatchall.CMD

Membuat file .cmd untuk menghapus (Hapus) wastafel acara Catchall Jika Anda berpikir bahwa Anda mungkin ingin menghapus kemudian. Untuk melakukannya, ikuti langkah-langkah:
  1. Ketik atau tempel kode berikut ke editor teks, seperti sebagai Notepad:
    cscript smtpreg.vbs /remove 1 onarrival SMTPScriptingCatchAll					
  2. Simpan file ini sebagaiRemovecatchall.CMD.

    Catatan Jika Anda ingin menghapus Catchall acara wastafel, Anda dapat melakukannya dengan menjalankan Removecatchall.CMD dari perintah prompt.

Mendaftar acara catchall wastafel

  1. Memverifikasi bahwa Anda telah membuat account valid e-mail dengan pesan e-mail yang mengumpulkan diarahkan.
  2. Menjalankan Catchall.cmd dari direktori yang memuat .VBS file yang Anda buat.
  3. Restart layanan SMTP dalam sistem pertukaran Manajer.
  4. Menguji wastafel acara dengan mengirim pesan e-mail ke e-mail alamat di catchall domain yang Anda tetapkan dalam langkah 2 "Catchall.vbs" bagian dari artikel ini. Pesan dikirim ke kotak pesan penerima dengan alamat yang Anda tentukan pada langkah 3 dari yang sama artikel bagian.
REFERENSI
Untuk informasi tambahan tentang cara mendapatkan pertukaran 2000 SDK, kunjungi Web site Microsoft berikut:

Peringatan: Artikel ini telah diterjemahkan secara otomatis

Properti

ID Artikel: 324021 - Tinjauan Terakhir: 09/26/2011 11:13:00 - Revisi: 2.0

Microsoft Exchange 2000 Server Standard Edition, Microsoft Exchange Server 2003 Enterprise Edition, Microsoft Exchange Server 2003 Standard Edition, Microsoft Windows Small Business Server 2003 Premium Edition, Microsoft Windows Small Business Server 2003 Standard Edition

  • kbhowtomaster kbmt KB324021 KbMtid
Tanggapan
/html>