You cannot establish an L2TP over IPsec connection from a Windows Embedded CE 6.0 R3-based device

Symptoms

Consider the following scenario:
  • You are running a Microsoft Windows Embedded CE 6.0 R3-based image on a device.
  • You try to establish a Layer Two Tunneling Protocol (L2TP) over Internet Protocol security (IPsec) connection from the device.
  • The device connects to a private network. The private network connects to a public network through a Network Address Translation (NAT) gateway. The L2TP server is located in a public network.
In this scenario, you cannot establish the L2TP over IPsec connection. 

Cause

This issue occurs because some Internal Key Exchange (IKE) packages are lost when they are sent through a port on the device. Therefore, the IPsec connection fails in the NAT gateway.

Resolution

Software update information

A supported software update is now available from Microsoft as Windows Embedded CE 6.0 Platform Builder Monthly Update (January, 2011). You can confirm this by scrolling to the "File information" section of this article. The package file name contains the product version, date, Knowledge Base article number, and processor type. The package file name format is:
Product version-yymmdd-kbnnnnnn-processor type
For example: Wincepb50-060503-kb917590-armv4i.msi is the ARMV4i Windows Embedded CE 5.0 Platform Builder fix that is documented in KB article 917590 and that is contained in the May 2006 monthly update. To resolve this problem immediately, click the following article number for information about obtaining Windows Embedded CE Platform Builder and core operating system software updates:
837392 How to locate core operating system fixes for Microsoft Windows Embedded CE Platform Builder products
Note This Windows Embedded CE 6.0 Monthly Update is also available for download from the following Microsoft Download Center website:

Prerequisites

This update is supported only if all previously issued updates for this product have also been installed.

Restart requirement

After you apply this update, you must perform a clean build of the whole platform. To do this, use one of the following methods:
  • On the Build menu, click Clean Solution, and then click Build Solution.
  • On the Build menu, click Rebuild Solution.
You do not have to restart the computer after you apply this software update.

Update replacement information

This update does not replace any other updates.

File information

The English version of this software update package has the file attributes (or later file attributes) that are listed in the following table. The dates and times for these files are listed in Coordinated Universal Time (UTC). When you view the file information, it is converted to local time. To find the difference between UTC and local time, use the Time Zone tab in the Date and Time item in Control Panel.
File nameFile sizeDateTime
Wincepb60-110112-kb2484550-x86.msi1,143,29612-Jan- 201122:13
Wincepb60-110112-kb2484550-armv4i.msi1,212,92812-Jan-201122:13
Wincepb60- 110112-kb2484550-mipsii.msi1,190,91212-Jan-201122:13
Wincepb60-110112-kb2484550- mipsii_fp.msi1,190,91212-Jan-201122:13
Wincepb60-110112-kb2484550-mipsiv.msi1,191,42412-Jan- 201122:13
Wincepb60-110112-kb2484550-mipsiv_fp.msi1,191,42412-Jan- 201122:13
Wincepb60-110112-kb2484550-sh4.msi1,185,79212-Jan-201122:13
File nameFile sizeDateTimePath
Ipsec.lib862,48205-Jan- 201115:46Public\Common\Oak\Lib\Armv4i\Debug
Ipsec.lib529,25405-Jan-201115:46Public \Common\Oak\Lib\Armv4i\Retail
Ipsec.lib819,24205-Jan-201115:46Public\Common\Oak\Lib\Mipsii \Debug
Ipsec.lib508,03805-Jan-201115:46Public\Common\Oak\Lib\Mipsii \Retail
Ipsec.lib819,49605-Jan-201115:46Public\Common\Oak\Lib\Mipsii_fp \Debug
Ipsec.lib508,23405-Jan-201115:46Public\Common\Oak\Lib\Mipsii_fp \Retail
Ipsec.lib825,87405-Jan-201115:47Public\Common\Oak\Lib\Mipsiv \Debug
Ipsec.lib511,92405-Jan-201115:46Public\Common\Oak\Lib\Mipsiv \Retail
Ipsec.lib826,12805-Jan-201115:47Public\Common\Oak\Lib\Mipsiv_fp \Debug
Ipsec.lib512,12605-Jan-201115:47Public\Common\Oak\Lib\Mipsiv_fp \Retail
Ipsec.lib715,25205-Jan-201115:47Public\Common\Oak\Lib \Sh4\Debug
Ipsec.lib476,13805-Jan-201115:47Public\Common\Oak\Lib \Sh4\Retail
Ipsec.lib697,73805-Jan-201115:46Public\Common\Oak\Lib \X86\Debug
Ipsec.lib479,57005-Jan-201115:46Public\Common\Oak\Lib\X86\Retail

Status

Microsoft has confirmed that this is a problem in the Microsoft products that are listed in the "Applies to" section.

More Information

For more information about performance issues when an IKE port receives lots of packets on a Windows Embedded CE 6.0 R3-based device if an L2TP over IPSec connection is established, click the following article number to view the article in the Microsoft Knowledge Base:
2467615 Performance issues when an IKE port receives lots of packets on a Windows Embedded CE 6.0 R3-based device if an L2TP over IPSec connection is established

For more information about software update terminology, click the following article number to view the article in the Microsoft Knowledge Base:
824684 Description of the standard terminology that is used to describe Microsoft software updates
プロパティ

文書番号:2484550 - 最終更新日: 2011/02/08 - リビジョン: 1

Windows Embedded CE 6.0 R3

フィードバック