Symptoms
Consider the following scenario:
-
You have a computer that is running Windows Server 2008 R2.
-
You connect a storage device that is controlled by Microsoft Multipath I/O (MPIO) to the computer.
-
You use a Microsoft Device Specific Module (DSM) for MPIO.
-
You send the IOCTL_MPIO_PASS_THROUGH_PATH_DIRECT control code that has an invalid MPIO path ID to the storage device.
In this scenario, any later attempts to access the storage device fail. Therefore, the application or operating system that tries to access the storage device stops responding, or it encounters other exceptions.
Note To recover from this issue, you have to restart the computer.
Cause
This issue occurs because the MPIO driver handles the IOCTL_MPIO_PASS_THROUGH_PATH_DIRECT control code that has an invalid MPIO path ID incorrectly.
Resolution
Hotfix information
A supported hotfix is available from Microsoft. However, this hotfix is intended to correct only the problem that is described in this article. Apply this hotfix only to systems that are experiencing the problem described in this article. This hotfix might receive additional testing. Therefore, if you are not severely affected by this problem, we recommend that you wait for the next software update that contains this hotfix.
If the hotfix is available for download, there is a "Hotfix download available" section at the top of this Knowledge Base article. If this section does not appear, contact Microsoft Customer Service and Support to obtain the hotfix.
Note If additional issues occur or if any troubleshooting is required, you might have to create a separate service request. The usual support costs will apply to additional support questions and issues that do not qualify for this specific hotfix. For a complete list of Microsoft Customer Service and Support telephone numbers or to create a separate service request, visit the following Microsoft Web site:
http://support.microsoft.com/contactus/?ws=supportNote The "Hotfix download available" form displays the languages for which the hotfix is available. If you do not see your language, it is because a hotfix is not available for that language.
Prerequisites
To apply this hotfix, you must be running Windows Server 2008 R2 or Windows Server 2008 R2 Service Pack 1 (SP1).
Restart requirement
You may have to restart the computer after you apply this hotfix.
Hotfix replacement information
This hotfix does not replace a previously released hotfix.
File information
The English (United States) version of this hotfix installs files that have the attributes that are listed in the following tables. The dates and the times for these files are listed in Coordinated Universal Time (UTC). The dates and the times for these files on your local computer are displayed in your local time together with your current daylight saving time (DST) bias. Additionally, the dates and the times may change when you perform certain operations on the files.
Windows Server 2008 R2 file information notes
Important Windows 7 hotfixes and Windows Server 2008 R2 hotfixes are included in the same packages. However, hotfixes on the Hotfix Request page are listed under both operating systems. To request the hotfix package that applies to one or both operating systems, select the hotfix that is listed under "Windows 7/Windows Server 2008 R2" on the page. Always refer to the "Applies To" section in articles to determine the actual operating system that each hotfix applies to.
-
The files that apply to a specific product, milestone (RTM, SPn), and service branch (LDR, GDR) can be identified by examining the file version numbers as shown in the following table:
Version
Product
Milestone
Service branch
6.1.760
0.20xxxWindows 7 and Windows Server 2008 R2
RTM
LDR
6.1.760
1.21xxxWindows 7 and Windows Server 2008 R2
SP1
LDR
-
The MANIFEST files (.manifest) and the MUM files (.mum) that are installed for each environment are listed separately in the "Additional file information for Windows 7 and for Windows Server 2008 R2" section. MUM and MANIFEST files, and the associated security catalog (.cat) files, are critical to maintaining the state of the updated component. The security catalog files, for which the attributes are not listed, are signed with a Microsoft digital signature.
For all supported x64-based versions of Windows Server 2008 R2
|
File name |
File version |
File size |
Date |
Time |
Platform |
|---|---|---|---|---|---|
|
Mpio.sys |
6.1.7600.20881 |
156,544 |
15-Jan-2011 |
06:26 |
x64 |
|
Mpio.sys |
6.1.7601.21642 |
156,544 |
15-Jan-2011 |
06:29 |
x64 |
For all supported IA-64-based versions of Windows Server 2008 R2
|
File name |
File version |
File size |
Date |
Time |
Platform |
|---|---|---|---|---|---|
|
Mpio.sys |
6.1.7600.20881 |
351,616 |
15-Jan-2011 |
05:24 |
IA-64 |
|
Mpio.sys |
6.1.7601.21642 |
351,104 |
15-Jan-2011 |
05:19 |
IA-64 |
Status
Microsoft has confirmed that this is a problem in the Microsoft products that are listed in the "Applies to" section.
More Information
For more information about software update terminology, click the following article number to view the article in the Microsoft Knowledge Base:
824684 Description of the standard terminology that is used to describe Microsoft software updates
Additional file information
Additional file information for Windows Server 2008 R2
Additional files for all supported x64-based versions of Windows Server 2008 R2
|
File name |
Amd64_mpio.inf_31bf3856ad364e35_6.1.7600.20881_none_79ad717dc226751f.manifest |
|
File version |
Not Applicable |
|
File size |
2,073 |
|
Date (UTC) |
15-Jan-2011 |
|
Time (UTC) |
07:00 |
|
Platform |
Not Applicable |
|
File name |
Amd64_mpio.inf_31bf3856ad364e35_6.1.7601.21642_none_7bc00e7dbf2b8a9e.manifest |
|
File version |
Not Applicable |
|
File size |
2,073 |
|
Date (UTC) |
15-Jan-2011 |
|
Time (UTC) |
07:02 |
|
Platform |
Not Applicable |
|
File name |
Update.mum |
|
File version |
Not Applicable |
|
File size |
3,170 |
|
Date (UTC) |
15-Jan-2011 |
|
Time (UTC) |
16:55 |
|
Platform |
Not Applicable |
Additional files for all supported IA-64-based versions of Windows Server 2008 R2
|
File name |
Ia64_mpio.inf_31bf3856ad364e35_6.1.7600.20881_none_1d9079f009c70ce5.manifest |
|
File version |
Not Applicable |
|
File size |
2,071 |
|
Date (UTC) |
15-Jan-2011 |
|
Time (UTC) |
06:50 |
|
Platform |
Not Applicable |
|
File name |
Ia64_mpio.inf_31bf3856ad364e35_6.1.7601.21642_none_1fa316f006cc2264.manifest |
|
File version |
Not Applicable |
|
File size |
2,071 |
|
Date (UTC) |
15-Jan-2011 |
|
Time (UTC) |
06:59 |
|
Platform |
Not Applicable |
|
File name |
Update.mum |
|
File version |
Not Applicable |
|
File size |
1,933 |
|
Date (UTC) |
15-Jan-2011 |
|
Time (UTC) |
16:55 |
|
Platform |
Not Applicable |
