This article applies to Microsoft Dynamics NAV for all countries and all language locales.

Symptoms

Assume that you enable the payment tolerance settings in Microsoft Dynamics NAV 2009. After you apply a payment that uses a foreign currency to an invoice that uses the local currency, the payment remains open with a remaining amount even though the payment tolerance is accepted.
This problem occurs in the following products:

  • Microsoft Dynamics NAV 2009 R2

  • Microsoft Dynamics NAV 2009 Service Pack 1 (SP1)

Resolution

Hotfix information

A supported hotfix is now available from Microsoft. However, it is only intended to correct the problem that is described in this article. Apply it only to systems that are experiencing this specific problem. This hotfix may receive additional testing. Therefore, if you are not severely affected by this problem, we recommend that you wait for the next Microsoft Dynamics NAV service pack or the next Microsoft Dynamics NAV version that contains this hotfix.

Note In special cases, charges that are ordinarily incurred for support calls may be canceled if a Technical Support Professional for Microsoft Dynamics and related products determines that a specific update will resolve your problem. The usual support costs will apply to additional support questions and issues that do not qualify for the specific update in question.



Installation information

Microsoft provides programming examples for illustration only, without warranty either expressed or implied. This includes, but is not limited to, the implied warranties of merchantability or fitness for a particular purpose. This article assumes that you are familiar with the programming language that is being demonstrated and with the tools that are used to create and to debug procedures. Microsoft support engineers can help explain the functionality of a particular procedure, but they will not modify these examples to provide added functionality or construct procedures to meet your specific requirements.

Note Before you install this hotfix, verify that all Microsoft Navision client users are logged off the system. This includes Microsoft Navision Application Services (NAS) client users. You should be the only client user who is logged on when you implement this hotfix.

To implement this hotfix, you must have a developer license.

We recommend that the user account in the Windows Logins window or in the Database Logins window be assigned the "SUPER" role ID. If the user account cannot be assigned the "SUPER" role ID, you must verify that the user account has the following permissions:

  • The Modify permission for the object that you will be changing.

  • The Execute permission for the System Object ID 5210 object and for the System Object ID 9015 object.



Note You do not have to have rights to the data stores unless you have to perform data repair.

Code changes

Note Always test code fixes in a controlled environment before you apply the fixes to your production computers.
To resolve this problem, follow these steps:

  1. Change the code in the ApplyCustLedgEntry function in the Gen. Jnl.-Post Line codeunit (12) as follows: 
    Existing code 1

    ...
    NewCVLedgEntryBuf."Currency Code",NewCVLedgEntryBuf."Posting Date");
    TempOldCustLedgEntry."Remaining Pmt. Disc. Possible" :=
    ExchAmount(
    TempOldCustLedgEntry."Remaining Pmt. Disc. Possible",TempOldCustLedgEntry."Currency Code",
    NewCVLedgEntryBuf."Currency Code",NewCVLedgEntryBuf."Posting Date");

    // Delete the following lines.
    TempOldCustLedgEntry."Accepted Payment Tolerance" :=
    ExchAmount(
    TempOldCustLedgEntry."Accepted Payment Tolerance",TempOldCustLedgEntry."Currency Code",
    NewCVLedgEntryBuf."Currency Code",NewCVLedgEntryBuf."Posting Date");
    // End of the lines.

    TempOldCustLedgEntry."Amount to Apply" :=
    ExchAmount(
    TempOldCustLedgEntry."Amount to Apply",TempOldCustLedgEntry."Currency Code",
    NewCVLedgEntryBuf."Currency Code",NewCVLedgEntryBuf."Posting Date");
    ...

    Replacement code 1

    ...
    NewCVLedgEntryBuf."Currency Code",NewCVLedgEntryBuf."Posting Date");
    TempOldCustLedgEntry."Remaining Pmt. Disc. Possible" :=
    ExchAmount(
    TempOldCustLedgEntry."Remaining Pmt. Disc. Possible",TempOldCustLedgEntry."Currency Code",
    NewCVLedgEntryBuf."Currency Code",NewCVLedgEntryBuf."Posting Date");
    TempOldCustLedgEntry."Amount to Apply" :=
    ExchAmount(
    TempOldCustLedgEntry."Amount to Apply",TempOldCustLedgEntry."Currency Code",
    NewCVLedgEntryBuf."Currency Code",NewCVLedgEntryBuf."Posting Date");
    ...

    Existing code 2

    ...
    NewCVLedgEntryBuf."Currency Code",NewCVLedgEntryBuf."Posting Date");
    OldCVLedgEntryBuf2."Remaining Pmt. Disc. Possible" :=
    ExchAmount(
    OldCVLedgEntryBuf2."Remaining Pmt. Disc. Possible",OldCVLedgEntryBuf2."Currency Code",
    NewCVLedgEntryBuf."Currency Code",NewCVLedgEntryBuf."Posting Date");

    // Delete the following lines.
    OldCVLedgEntryBuf2."Accepted Payment Tolerance" :=
    ExchAmount(
    OldCVLedgEntryBuf2."Accepted Payment Tolerance",OldCVLedgEntryBuf2."Currency Code",
    NewCVLedgEntryBuf."Currency Code",NewCVLedgEntryBuf."Posting Date");
    // End of the lines.

    OldCVLedgEntryBuf2."Amount to Apply" :=
    ExchAmount(
    OldCVLedgEntryBuf2."Amount to Apply",OldCVLedgEntryBuf2."Currency Code",
    NewCVLedgEntryBuf."Currency Code",NewCVLedgEntryBuf."Posting Date");
    ...

    Replacement code 2

    ...
    NewCVLedgEntryBuf."Currency Code",NewCVLedgEntryBuf."Posting Date");
    OldCVLedgEntryBuf2."Remaining Pmt. Disc. Possible" :=
    ExchAmount(
    OldCVLedgEntryBuf2."Remaining Pmt. Disc. Possible",OldCVLedgEntryBuf2."Currency Code",
    NewCVLedgEntryBuf."Currency Code",NewCVLedgEntryBuf."Posting Date");
    OldCVLedgEntryBuf2."Amount to Apply" :=
    ExchAmount(
    OldCVLedgEntryBuf2."Amount to Apply",OldCVLedgEntryBuf2."Currency Code",
    NewCVLedgEntryBuf."Currency Code",NewCVLedgEntryBuf."Posting Date");
    ...
  2. Change the code in the ApplyVendLedgEntry function in the Gen. Jnl.-Post Line codeunit (12) as follows:
    Existing code 1

    ...
    NewCVLedgEntryBuf."Currency Code",NewCVLedgEntryBuf."Posting Date");
    TempOldVendLedgEntry."Remaining Pmt. Disc. Possible" :=
    ExchAmount(
    TempOldVendLedgEntry."Remaining Pmt. Disc. Possible",TempOldVendLedgEntry."Currency Code",
    NewCVLedgEntryBuf."Currency Code",NewCVLedgEntryBuf."Posting Date");

    // Delete the following lines.
    TempOldVendLedgEntry."Accepted Payment Tolerance" :=
    ExchAmount(
    TempOldVendLedgEntry."Accepted Payment Tolerance",TempOldVendLedgEntry."Currency Code",
    NewCVLedgEntryBuf."Currency Code",NewCVLedgEntryBuf."Posting Date");
    // End of the lines.

    TempOldVendLedgEntry."Amount to Apply" :=
    ExchAmount(
    TempOldVendLedgEntry."Amount to Apply",TempOldVendLedgEntry."Currency Code",
    NewCVLedgEntryBuf."Currency Code",NewCVLedgEntryBuf."Posting Date");
    ...

    Replacement code 1

    ...
    NewCVLedgEntryBuf."Currency Code",NewCVLedgEntryBuf."Posting Date");
    TempOldVendLedgEntry."Remaining Pmt. Disc. Possible" :=
    ExchAmount(
    TempOldVendLedgEntry."Remaining Pmt. Disc. Possible",TempOldVendLedgEntry."Currency Code",
    NewCVLedgEntryBuf."Currency Code",NewCVLedgEntryBuf."Posting Date");
    TempOldVendLedgEntry."Amount to Apply" :=
    ExchAmount(
    TempOldVendLedgEntry."Amount to Apply",TempOldVendLedgEntry."Currency Code",
    NewCVLedgEntryBuf."Currency Code",NewCVLedgEntryBuf."Posting Date");
    ...

    Existing code 2

    ...
    NewCVLedgEntryBuf."Currency Code",NewCVLedgEntryBuf."Posting Date");
    OldCVLedgEntryBuf2."Remaining Pmt. Disc. Possible" :=
    ExchAmount(
    OldCVLedgEntryBuf2."Remaining Pmt. Disc. Possible",OldCVLedgEntryBuf2."Currency Code",
    NewCVLedgEntryBuf."Currency Code",NewCVLedgEntryBuf."Posting Date");

    // Delete the following lines.
    OldCVLedgEntryBuf2."Accepted Payment Tolerance" :=
    ExchAmount(
    OldCVLedgEntryBuf2."Accepted Payment Tolerance",OldCVLedgEntryBuf2."Currency Code",
    NewCVLedgEntryBuf."Currency Code",NewCVLedgEntryBuf."Posting Date");
    // End of the lines.

    OldCVLedgEntryBuf2."Amount to Apply" :=
    ExchAmount(
    OldCVLedgEntryBuf2."Amount to Apply",OldCVLedgEntryBuf2."Currency Code",
    NewCVLedgEntryBuf."Currency Code",NewCVLedgEntryBuf."Posting Date");
    ...

    Replacement code 2

    ...
    NewCVLedgEntryBuf."Currency Code",NewCVLedgEntryBuf."Posting Date");
    OldCVLedgEntryBuf2."Remaining Pmt. Disc. Possible" :=
    ExchAmount(
    OldCVLedgEntryBuf2."Remaining Pmt. Disc. Possible",OldCVLedgEntryBuf2."Currency Code",
    NewCVLedgEntryBuf."Currency Code",NewCVLedgEntryBuf."Posting Date");
    OldCVLedgEntryBuf2."Amount to Apply" :=
    ExchAmount(
    OldCVLedgEntryBuf2."Amount to Apply",OldCVLedgEntryBuf2."Currency Code",
    NewCVLedgEntryBuf."Currency Code",NewCVLedgEntryBuf."Posting Date");
    ...
  3. Change the code in the PutCustPmtTolAmount function in the Payment Tolerance Management codeunit (426) as follows:
    Existing code

    ...
    AcceptedEntryTolAmount := ROUND((AppliedCustLedgEntry.Amount / TotalAmount) * AcceptedTolAmount);
    TotalAmount := TotalAmount - AppliedCustLedgEntry.Amount;

    // Delete the following lines.
    IF CustledgEntry."Currency Code" <> AppliedCustLedgEntry."Currency Code" THEN BEGIN
    AcceptedEntryTolAmount :=
    GenJnlPostLine.ExchAmount(
    AcceptedEntryTolAmount,CustledgEntry."Currency Code",AppliedCustLedgEntry."Currency Code",
    CustledgEntry."Posting Date");
    AcceptedTolAmount := AcceptedTolAmount -
    GenJnlPostLine.ExchAmount(
    AcceptedEntryTolAmount,AppliedCustLedgEntry."Currency Code",CustledgEntry."Currency Code",
    CustledgEntry."Posting Date");
    END ELSE
    AcceptedTolAmount := AcceptedTolAmount - AcceptedEntryTolAmount;
    AppliedCustLedgEntry."Accepted Payment Tolerance" := AcceptedEntryTolAmount;
    END ELSE BEGIN
    AcceptedEntryTolAmount := AcceptedTolAmount;
    IF CustledgEntry."Currency Code" <> AppliedCustLedgEntry."Currency Code" THEN
    AcceptedEntryTolAmount :=
    GenJnlPostLine.ExchAmount(
    AcceptedEntryTolAmount,CustledgEntry."Currency Code",AppliedCustLedgEntry."Currency Code",
    CustledgEntry."Posting Date");
    // End of the lines.

    AppliedCustLedgEntry."Accepted Payment Tolerance" := AcceptedEntryTolAmount;
    END;
    AppliedCustLedgEntry."Max. Payment Tolerance" := AppliedCustLedgEntryTemp."Max. Payment Tolerance";
    AppliedCustLedgEntry."Amount to Apply" := AppliedCustLedgEntryTemp."Remaining Amount";
    AppliedCustLedgEntry.MODIFY;
    ...

    Replacement code

    ...
    AcceptedEntryTolAmount := ROUND((AppliedCustLedgEntry.Amount / TotalAmount) * AcceptedTolAmount);
    TotalAmount := TotalAmount - AppliedCustLedgEntry.Amount;

    // Add the following lines.
    AcceptedTolAmount := AcceptedTolAmount - AcceptedEntryTolAmount;
    AppliedCustLedgEntry."Accepted Payment Tolerance" := AcceptedEntryTolAmount;
    END ELSE BEGIN
    AcceptedEntryTolAmount := AcceptedTolAmount;
    //End of the lines.

    AppliedCustLedgEntry."Accepted Payment Tolerance" := AcceptedEntryTolAmount;
    END;
    AppliedCustLedgEntry."Max. Payment Tolerance" := AppliedCustLedgEntryTemp."Max. Payment Tolerance";
    AppliedCustLedgEntry."Amount to Apply" := AppliedCustLedgEntryTemp."Remaining Amount";
    AppliedCustLedgEntry.MODIFY;
    ...
  4. Change the code in the PutVendPmtTolAmount function in the Payment Tolerance Management codeunit (426) as follows:
    Existing code

    ...
    AcceptedEntryTolAmount := ROUND((AppliedVendLedgEntry.Amount / TotalAmount) * AcceptedTolAmount);
    TotalAmount := TotalAmount - AppliedVendLedgEntry.Amount;

    // Delete the following lines.
    IF VendLedgEntry."Currency Code" <> AppliedVendLedgEntry."Currency Code" THEN BEGIN
    AcceptedEntryTolAmount :=
    GenJnlPostLine.ExchAmount(
    AcceptedEntryTolAmount,VendLedgEntry."Currency Code",AppliedVendLedgEntry."Currency Code",
    VendLedgEntry."Posting Date");
    AcceptedTolAmount := AcceptedTolAmount -
    GenJnlPostLine.ExchAmount(
    AcceptedEntryTolAmount,AppliedVendLedgEntry."Currency Code",VendLedgEntry."Currency Code",
    VendLedgEntry."Posting Date");
    END ELSE
    AcceptedTolAmount := AcceptedTolAmount - AcceptedEntryTolAmount;
    AppliedVendLedgEntry."Accepted Payment Tolerance" := AcceptedEntryTolAmount;
    END ELSE BEGIN
    AcceptedEntryTolAmount := AcceptedTolAmount;
    IF VendLedgEntry."Currency Code" <> AppliedVendLedgEntry."Currency Code" THEN
    AcceptedEntryTolAmount :=
    GenJnlPostLine.ExchAmount(
    AcceptedEntryTolAmount,VendLedgEntry."Currency Code",AppliedVendLedgEntry."Currency Code",
    VendLedgEntry."Posting Date");
    // End of the lines.

    AppliedVendLedgEntry."Accepted Payment Tolerance" := AcceptedEntryTolAmount;
    END;
    AppliedVendLedgEntry."Max. Payment Tolerance" := AppliedVendLedgEntryTemp."Max. Payment Tolerance";
    AppliedVendLedgEntry."Amount to Apply" := AppliedVendLedgEntryTemp."Remaining Amount";
    AppliedVendLedgEntry.MODIFY;
    ...

    Replacement code

    ...
    AcceptedEntryTolAmount := ROUND((AppliedVendLedgEntry.Amount / TotalAmount) * AcceptedTolAmount);
    TotalAmount := TotalAmount - AppliedVendLedgEntry.Amount;

    // Add the following lines.
    AcceptedTolAmount := AcceptedTolAmount - AcceptedEntryTolAmount;
    AppliedVendLedgEntry."Accepted Payment Tolerance" := AcceptedEntryTolAmount;
    END ELSE BEGIN
    AcceptedEntryTolAmount := AcceptedTolAmount;
    //End of the lines.

    AppliedVendLedgEntry."Accepted Payment Tolerance" := AcceptedEntryTolAmount;
    END;
    AppliedVendLedgEntry."Max. Payment Tolerance" := AppliedVendLedgEntryTemp."Max. Payment Tolerance";
    AppliedVendLedgEntry."Amount to Apply" := AppliedVendLedgEntryTemp."Remaining Amount";
    AppliedVendLedgEntry.MODIFY;
    ...

Prerequisites

You must have one of the following products installed to apply this hotfix:

  • Microsoft Dynamics NAV 2009 R2

  • Microsoft Dynamics NAV 2009 Service Pack 1 (SP1)

Removal information

You cannot remove this hotfix.

Status

Microsoft has confirmed that this is a problem in the Microsoft products that are listed in the "Applies to" section.

Note This is a "FAST PUBLISH" article created directly from within the Microsoft support organization. The information contained herein is provided as-is in response to emerging issues. As a result of the speed in making it available, the materials may include typographical errors and may be revised at any time without notice. See Terms of Use for other considerations.

추가 도움이 필요하신가요?

기술 향상
교육 살펴보기
새로운 기능 우선 가져오기
Microsoft Insider 참가

이 정보가 유용한가요?

사용 경험에 어떠한 영향을 주었나요?

소중한 의견에 감사드립니다.

×