Cumulative update package 1 for SQL Server 2012 Service Pack 1

INTRODUCTION

This article describes cumulative update package 1 for Microsoft SQL Server 2012. This update contains hotfixes for issues that were fixed after the release of SQL Server 2012 Service Pack 1 (SP1).

Note
  This build number of this cumulative update package is 11.0.3321.0.

We recommend that you test hotfixes before you deploy them in a production environment. Because the builds are cumulative, each new fix release contains all the hotfixes and all the security fixes that were included with the previous SQL Server 2012 SP1 fix release. We recommend that you consider applying the most recent fix release that contains this hotfix.

For more information, click the following article number to view the article in the Microsoft Knowledge Base:
2772858 The SQL Server 2012 builds that were released after SQL Server 2012 Service Pack 1 was released

Important notes about the cumulative update package

  • SQL Server 2012 SP1 hotfixes are now multilanguage. Therefore, there is only one cumulative hotfix package for all languages.
  • One cumulative hotfix package includes all the component packages. The cumulative update package updates only those components that are installed on the system.

More Information

How to obtain Cumulative Update 1 for SQL Server 2012 SP1

A supported cumulative update package is now available from Microsoft. However, it is intended to correct only the problems that are described in this article. Apply it only to systems that are experiencing these specific problems. This cumulative update package may receive additional testing. Therefore, if you are not severely affected by any of these problems, we recommend that you wait for the next SQL Server 2012 service pack that contains the hotfixes in this cumulative update package.

If the cumulative update is available for download, there is a "Hotfix download available" section at the top of this Knowledge Base article. If this section does not appear, contact Microsoft Customer Service and Support to obtain the cumulative update package.

Note If additional issues occur or any troubleshooting is required, you might have to create a separate service request. The usual support costs will apply to additional support questions and issues that do not qualify for this specific cumulative update package. For a complete list of Microsoft Customer Service and Support telephone numbers or to create a separate service request, visit the following Microsoft website:

Hotfixes that are included in this cumulative update package


Microsoft Knowledge Base articles that discuss these hotfixes will be released as they become available.


For more information about the SQL Server bugs, click the following article numbers to view the articles in the Microsoft Knowledge Base:
VSTS bug numberKB article numberDescription
10867842406666 FIX: "[Teradata Database] [3737]" error when you click "Count" in the Aggregation Design Wizard in SSAS 2008, in SSAS 2012 or in SSAS 2008 R2
10785232445812 FIX: A column that uses the DATETIME data type does not replicate to an Oracle subscriber by using a transactional replication in SQL Server 2008, in SQL Server 2008 R2 or in SQL Server 2012
10786472644794 FIX: fFalse assertion error when you try to convert the value from an XML column to an XML variable in SQL Server 2008, in SQL Server 2008 R2 or in SQL Server 2012
10786552645648 FIX: Export procedure fails when you export a 64-bit SSRS 2008 R2 report, SSRS 2012 report or a SSRS 2008 report that contains multiple levels of a document map to the PDF format
10785122651629 FIX: Error message when you use DTA to tune one or more queries against a database that contains many objects in SQL Server 2008, in SQL Server 2008 R2 or in SQL Server 2012
10867622661644 FIX: Access violation in the sqlservr!ReplicaToPrimaryPageCopier::ReadIoCompletionRoutine function in SQL Server 2008 R2 or in SQL Server 2012
10785792667037 FIX: "The connection string format is not valid" error when you try to create a maintenance plan for a SQL Server 2008 R2 or SQL Server 2012 server
10786312667742 FIX: "out of memory" error when you use ODBC with SQL Server 2012, SQL Server 2008 R2 or SQL Server 2008
10785412671078 FIX: "Attempting to set a non-NULL-able column's value to NULL" error message when you use a MERGE statement in SQL Server 2008, in SQL Server 2008 R2 or in SQL Server 2012
10867612671318 FIX: The first execution of the xp_cmdshell stored procedure is not completed until the last execution is complete in SQL Server 2012
10785382680799 FIX: Error message when you perform a full population of a full-text index by using word breakers for Chinese language in SQL Server 2008, in SQL Server 2008 R2 or in SQL Server 2012
10785822697983 FIX: An incorrect value is stored in the TIME_ZONE column of the BACKUPSET table in SQL Server 2008 R2 or in SQL Server 2012
10785352698639 FIX: Performance of a SELECT statement that contains a LIKE operator and an ESCAPE clause is low in SQL Server 2008 R2 or in SQL Server 2012
10785882699013 FIX: SQL Server 2012, SQL Server 2008 R2 or SQL Server 2008 stops responding and a "Non-yielding Scheduler" error is logged
10785162703193 FIX: Incorrect results when you run a parallel query that uses a columnstore index in SQL Server 2012
10785932706601 FIX: Series groups in a report are missing when you render the report in SQL Server 2008 Reporting Services or in later versions of Reporting Services
10785972708027 FIX: "An error has occurred during report processing" error message when you try to preview an SSRS 2008 R2 or SSRS 2012 report after you set the dataset collation to Greek or Greek_100
10785272708786 FIX: Access violation when you try to build a columnstore index for a table in SQL Server 2012
10785302709075 "A severe error occurred on the current command" error when you run a full-text query that has the CONTAINS predicate in SQL Server 2012
10786492713151 FIX: Access violation when you use Database Engine Tuning Advisor to tune a table in SQL Server 2008, in SQL Server 2008 R2 or in SQL Server 2012 if you enable the "Include filtered indexes" check box
10785472713827 FIX: "Dataflow - " error when you try to open an SSIS package in SSIS 2012
1078603, 10867742714634 FIX: SQL Server 2008 R2 or SQL Server 2012 takes a long time to generate scripts for a partitioned table that uses the data compression feature
10785442714937 FIX: "No object exists with a lineage ID" error message when you run an SSIS 2012 package
10785732720171 FIX: Error message when you run an SSIS package if the sys.xp_regread stored procedure is revoked in SQL Server 2012: "The EXECUTE permission was denied on the object 'xp_regread'"
10867702723979 FIX: Access violation in SQL Server internal deadlock monitor when you run multiple applications together with Multiple Active Result Sets enabled in SQL Server 2008 R2 or in SQL Server 2012
1078613, 10786162725950 FIX: Slow performance or deadlock when you restore a database and execute statements at the same time in SQL Server 2012
10786582727322 FIX: Incorrect results are returned when you run a query that uses parallelism in the query execution plan in SQL Server 2008, in SQL Server 2008 R2 or in SQL Server 2012
10867692728419 FIX: "Tuning process exited unexpectedly" error message when you run Database Engine Tuning Advisor under the db_owner role in SQL Server 2008 R2 or in SQL Server 2012
10867712728534 FIX: "A system assertion check has failed" error when you re-create a nonclustered index on a column in SQL Server 2008 R2 or in SQL Server 2012
10867732731068 FIX: "An unexpected error occurred" when you query some calculation data of an SSAS tabular model by using SQL Server 2008 R2 PowerPivot for Excel 2010 or SQL Server 2008 R2 PowerPivot for SharePoint 2010
10867722737499 FIX: KeepTogether property does not work when you generate a report that contains a tablix in SSRS 2008 R2 or in SSRS 2012
10785752737580 FIX: Internal error when you execute queries against a non-rectangular mining model by using DMX or MDX in SQL Server 2012 Analysis Services
10867662738197 FIX: Worker threads do not wake up immediately when multiple I/O-intensive tasks are running at the same in SQL Server 2012
10867672739940 FIX: Database is offline and in "In Recovery" state when you rebuild an index in SQL Server 2012 if the transaction log is full
10867802752511 FIX: "Arithmetic overflow error" message when you run the sys.sp_tables_info_90_rowset_64 system stored procedure on a linked server in SQL Server 2012
10867812754444 FIX: "Index and length must refer to a location within the string" error message when you extract a large volume of data from SAP BW in an SSIS 2012 package
10867822754939 FIX: Access violation occurs when you run a full-text query in SQL Server 2012
10867852755079 FIX: Changes are not synchronized to subscribers after you change an article filter in a transactional replication publication in SQL Server 2008, in SQL Server 2012 or in SQL Server 2008 R2
10867632756097 FIX: "Community Technology Preview (August CTP)" is displayed in the installation or uninstallation wizard of a SQL Server 2012 update
10867652762557 FIX: "Process appears to be non-yielding on Scheduler " error message when you run a query in SQL Server 2012
10867832762559 FIX: SQL Server 2012 failures are displayed in the Task Status Notifications dialog box in System Center Operations Manager 2012
10867862762593 FIX: Tablediff utility reports incorrect results when a table contains a primary key in a uniqueidentifier column in SQL Server 2012
11159732780716 FIX: Data loss when you export Microsoft Azure SQL Database to a data-tier application .bacpac package
11160322780719 FIX: Data loss when you import a data-tier application from a .bacpac package file to Microsoft Azure SQL Database

Cumulative update package information

Restart information


You may have to restart the computer after you apply this cumulative update.

Registry information


To use one of the hotfixes in this package, you do not have to make any changes to the registry.



How to uninstall this cumulative update package

To uninstall this cumulative update package, follow these steps:
  1. In Control Panel, open the Add or Remove Programs
    item.

    Note If you are running Windows 7, open the Programs and Features item in Control Panel.
  2. Locate the entry that was installed by this cumulative update package.
  3. Right-click the entry, and then select Uninstall to remove the cumulative update package.

References


For more information about the Incremental Servicing Model for SQL Server, click the following article number to view the article in the Microsoft Knowledge Base:
935897
An Incremental Servicing Model is available from the SQL Server team to deliver hotfixes for reported problems

For more information about the naming schema for SQL Server updates, click the following article number to view the article in the Microsoft Knowledge Base:
822499
Naming schema for Microsoft SQL Server software update packages
For more information about software update terminology, click the following article number to view the article in the Microsoft Knowledge Base:
824684
Description of the standard terminology that is used to describe Microsoft software updates
Savybės

Straipsnio ID: 2765331 – Paskutinė peržiūra: 2014-06-20 – Peržiūra: 1

Microsoft SQL Server 2012 Service Pack 1, Microsoft SQL Server 2012 Standard, Microsoft SQL Server 2012 Web, Microsoft SQL Server 2012 Developer, Microsoft SQL Server 2012 Enterprise

Atsiliepimai