Šis raksts attiecas uz Microsoft Dynamics NAV Indijas (valodas lokalizācijas ne).
Pazīmes
Indijas valodas versijā Microsoft Dynamics NAV 2009. gada 1. servisa pakotne (SP1), Parādīt "nodokļu %" vērtība ir nepareizi iegrāmatotā pārdošanas rēķina rindas un pārdošanas pasūtījuma rinda. Paredzēts "Nodokļu %" vērtība, kas atbilst nodokļu zem minimālā vērtība nodokļu detaļas iestatījumos. Pati problēma rodas arī pirkšanas dokumentiem.
Risinājums
Informācija par labojumfailu
Pašlaik korporācija Microsoft piedāvā atbalstītu labojumfailu. Tomēr tas ir paredzēts tikai šajā rakstā aprakstītās problēmas novēršanai. Izmantojiet to tikai tām sistēmām, kurām ir radusies tieši šī problēma. Iespējams, tiks veikta šī labojumfaila papildu testēšana. Tādēļ, ja jums ir šī problēma nerada nopietnus traucējumus, ieteicams nogaidīt, līdz tiks izlaista nākamā servisa pakotne Microsoft Dynamics NAV 2009 vai nākamo Microsoft Dynamics NAV versiju, kurā ir iekļauts šis labojumfails.
Piezīme. Īpašos gadījumos standarta izmaksas par atbalsta zvaniem nav jāsedz, ja tehniskā atbalsta speciālists Microsoft Dynamics un saistītiem produktiem nosaka, ka šo problēmu novērsīs noteikts atjauninājums. Parasti atbalsta izmaksas tiek piemērotas jautājumiem par papildu atbalstu un problēmām, kas neskar specifisko atjauninājumu apspriešanu.
Informācija par instalēšanu
Microsoft piedāvā programmēšanas piemērus tikai uzskatāmībai, nesniedzot nekādas tiešas vai netiešas garantijas. Tas ietver, bet neaprobežojas ar netiešām garantijām par piemērotību pārdošanai vai atbilstību noteiktam mērķim. Šajā rakstā tiek pieņemts, ka pārzināt programmēšanas valodu, kas tiek aprakstīta, un rīkus, kas tiek izmantoti, lai izveidotu un atkļūdotu procedūras. Microsoft atbalsta inženieri var palīdzēt izskaidrot kādas noteiktas procedūras funkcionalitāti, taču viņi nemainīs šos piemērus, lai sniegtu skaidrāku funkcionalitāti, un neveidos jaunas procedūras, kas atbilstu īpašām prasībām.
Piezīme. Pirms šī labojumfaila instalēšanas pārliecinieties, vai ka visi Microsoft Navision klients lietotāji ir atteikušies sistēmu. Tas ietver Microsoft Navision lietojumprogrammu pakalpojumu (NAS) klients lietotājiem. Jums ir jābūt tikai klienta lietotājam, kurš ir pieteicies datorā, kad izmantojat šo labojumfailu.
Lai ieviestu šo labojumfailu, datorā jābūt instalētai izstrādātāja licenci.
Ieteicams, ka lietotāja konts tiek atvērts logs Windows lietotājvārdi vai logā datu bāzes lietotājvārdi piešķirt "SUPER" lomas ID. Ja lietotāja kontam nevar piešķirt "SUPER" lomas ID, jāpārbauda, lietotāja konts ir šādas atļaujas:
-
Objektu, kas jums būs mainīt modificēt atļaujas.
-
Izpildes atļauja objekta objekta ID 5210 sistēmas un sistēmas objekta ID 9015 objekta.
Piezīme. Jums nav tiesības datu krātuvju vien lai veiktu datu labošanu.
Koda izmaiņas
Piezīme. Vienmēr pārbaudes kods novērš kontrolētā vidē pirms lietojat datoru ražošanas labojumus.
Lai novērstu šo problēmu, rīkojieties šādi:
-
Mainiet OnValidate trigera tabulā Pārdošanas rinda (37) Summa ieskaitot PVN kods šādi:
Kods... ELSE
"Amount To Customer" :=
ROUND("Line Amount" - "Inv. Discount Amount" + "Excise Amount" + "Charges To Customer" -
"Bal. TDS/TCS Including SHECESS" + "Service Tax Amount" +"Service Tax eCess Amount" +
"Service Tax SHE Cess Amount",Currency."Amount Rounding Precision");
END;
// Delete the following lines.
//IF "Tax Base Amount" <> 0 THEN
// "Tax %" := ROUND(100 * ("Amount Including Tax" - "Tax Base Amount") / "Tax Base Amount",Currency."Amount Rounding Precision")
//ELSE
// "Tax %" := 0;
// End of the deleted lines.
InitOutstandingAmount;
END;
...Aizstāšanas kodu
... ELSE
"Amount To Customer" :=
ROUND("Line Amount" - "Inv. Discount Amount" + "Excise Amount" + "Charges To Customer" -
"Bal. TDS/TCS Including SHECESS" + "Service Tax Amount" +"Service Tax eCess Amount" +
"Service Tax SHE Cess Amount",Currency."Amount Rounding Precision");
END;
// Add the following lines.
IF "Tax Base Amount" = 0 THEN
"Tax %" := 0;
// End of the added lines.
InitOutstandingAmount;
END;
... -
Nomainiet šo kodu tabulā Pārdošanas rinda (37) UpdateTaxAmounts funkciju šādi:
Kods 1... "Bal. TDS/TCS Including SHECESS" + "Service Tax Amount" + "Service Tax eCess Amount" +
"Service Tax SHE Cess Amount",Currency."Amount Rounding Precision")
END;
IndianSalesTaxCalculate.SetCurrency("Currency Code" <>'');
// Delete the following lines.
//LineTaxAmount := IndianSalesTaxCalculate.CalculateTax(
// "Tax Area Code","Tax Group Code","Tax Liable",SalesHeader."Posting Date",
// "Tax Base Amount",Quantity,SalesHeader."Currency Factor","Form Code");
// End of the deleted lines.
TotalTaxAmount := 0;
TotalStdDeductionAmt := 0;
...Aizstāšanas kods = 1
... "Bal. TDS/TCS Including SHECESS" + "Service Tax Amount" + "Service Tax eCess Amount" +
"Service Tax SHE Cess Amount",Currency."Amount Rounding Precision")
END;
IndianSalesTaxCalculate.SetCurrency("Currency Code" <>'');
// Add the following lines.
LineTaxAmount := IndianSalesTaxCalculate.CalculateTax(
"Tax Area Code","Tax Group Code","Tax Liable",SalesHeader."Posting Date",
"Tax Base Amount",Quantity,SalesHeader."Currency Factor","Form Code","Tax %");
// End of the added lines.
TotalTaxAmount := 0;
TotalStdDeductionAmt := 0;
...Kods 2.
... END ELSE
IndianSalesTaxCalculate.GetStandardDeductionAmt(Rec,StandardDeductionAmount,LineTaxAmount);
END
END;
"Amount Including Tax" := ROUND("Tax Base Amount" + LineTaxAmount,Currency."Amount Rounding Precision");
// Delete the following lines.
//IF "Tax Base Amount" <> 0 THEN
// "Tax %" :=
// ROUND(100 * ("Amount Including Tax" - "Tax Base Amount") / "Tax Base Amount",Currency."Amount Rounding Precision")
//ELSE
// "Tax %" := 0;
// End of the deleted lines.
IF "Standard Deduction %" <>0 THEN
"Standard Deduction Amount" := ("Tax Base Amount" * "Standard Deduction %" / 100)
...Aizstāšanas kods 2.
... END ELSE
IndianSalesTaxCalculate.GetStandardDeductionAmt(Rec,StandardDeductionAmount,LineTaxAmount);
END
END;
"Amount Including Tax" := ROUND("Tax Base Amount" + LineTaxAmount,Currency."Amount Rounding Precision");
// Add the following lines.
IF "Tax Base Amount" = 0 THEN
"Tax %" := 0;
// End of the added lines.
IF "Standard Deduction %" <>0 THEN
"Standard Deduction Amount" := ("Tax Base Amount" * "Standard Deduction %" / 100)
... -
Mainiet OnValidate trigeris — Pirkšanas rindu tabulā (39) Summa ieskaitot PVN kods šādi:
Kods... "Amount To Vendor" := ROUND("Line Amount" -"Inv. Discount Amount" + "Excise Amount" + "Tax Amount" -
"Bal. TDS Including SHE CESS" + "Charges To Vendor" + "Service Tax Amount" +
"Service Tax eCess Amount" + "Service Tax SHE Cess Amount");
END;
// Delete the following lines.
//IF "Tax Base Amount" <> 0 THEN
// "Tax %" := ROUND(100 * ("Amount Including Tax" - "Tax Base Amount") / "Tax Base Amount",
// Currency."Amount Rounding Precision")
//ELSE // Delete
// "Tax %" := 0;
// End of the deleted lines.
InitOutstandingAmount;
...Aizstāšanas kodu
... "Amount To Vendor" := ROUND("Line Amount" -"Inv. Discount Amount" + "Excise Amount" + "Tax Amount" -
"Bal. TDS Including SHE CESS" + "Charges To Vendor" + "Service Tax Amount" +
"Service Tax eCess Amount" + "Service Tax SHE Cess Amount");
END;
// Add the following lines.
IF "Tax Base Amount" = 0 THEN // Add
// End of the added lines.
InitOutstandingAmount;
... -
Nomainiet šo kodu UpdateTaxAmounts funkciju Pirkšanas rindu tabulā (39) šādi:
Kods 1... "Bal. TDS Including SHECESS" + "Service Tax Amount" + "Service Tax eCess Amount" +
"Service Tax SHE Cess Amount",Currency."Amount Rounding Precision")
END;
IndianSalesTaxCalculate.SetCurrency("Currency Code" <>'');
// Delete the following lines.
//LineTaxAmount := ROUND(IndianSalesTaxCalculate.CalculateTax(
// "Tax Area Code","Tax Group Code","Tax Liable",PurchHeader."Posting Date",
// "Tax Base Amount",Quantity,PurchHeader."Currency Factor","Form Code"),Currency."Amount Rounding Precision");
// End of the deleted lines.
AmountonInventory := 0;
InputTaxCreditAmount := 0;
...Aizstāšanas kods = 1
... "Bal. TDS Including SHECESS" + "Service Tax Amount" + "Service Tax eCess Amount" +
"Service Tax SHE Cess Amount",Currency."Amount Rounding Precision")
END;
IndianSalesTaxCalculate.SetCurrency("Currency Code" <>'');
// Add the following lines.
LineTaxAmount := ROUND(IndianSalesTaxCalculate.CalculateTax(
"Tax Area Code","Tax Group Code","Tax Liable",PurchHeader."Posting Date",
"Tax Base Amount",Quantity,PurchHeader."Currency Factor","Form Code","Tax %"),Currency."Amount Rounding Precision");
// End of the added lines.
AmountonInventory := 0;
InputTaxCreditAmount := 0;
...Kods 2.
... "Tax Amount" := ROUND(TaxAmount,Currency."Amount Rounding Precision");
"Amount Including Tax" := ("Tax Base Amount" + "Tax Amount");
// Delete the following lines.
//IF "Tax Base Amount" <> 0 THEN
// "Tax %" := ROUND(100 * ("Amount Including Tax" - "Tax Base Amount") / "Tax Base Amount",
// Currency."Amount Rounding Precision")
//ELSE
// "Tax %" := 0;
// End of the deleted lines.
ServiceTaxSetup.RESET;
...Aizstāšanas kods 2.
... "Tax Amount" := ROUND(TaxAmount,Currency."Amount Rounding Precision");
"Amount Including Tax" := ("Tax Base Amount" + "Tax Amount");
// Add the following lines.
IF "Tax Base Amount" = 0 THEN
"Tax %" := 0;
// End of the added lines.
ServiceTaxSetup.RESET;
... -
Nomainiet šo kodu tabulā PVN darba žurnāla UpdateTaxAmount (16569) funkcijas šādi:
Kods... IF "Transaction Type" = "Transaction Type"::Purchase THEN BEGIN
// Delete the following lines.
//LineTaxAmount := IndianSalesTaxCalculate.CalculateTax(
// "Tax Area Code","Tax Group Code",TRUE,"Posting Date",
// "Tax Base Amount",Quantity,0,'');
// End of the deleted lines.
IF LineTaxAmount <> 0 THEN
IndianSalesTaxCalculate.GetVATOpeningInputTaxCredit(Rec,"Amount Loaded on Item",
"Input Credit/Output Tax Amount",TRUE,TaxAmount);
"Tax Amount" := TaxAmount;
IF GLSetup."VAT Rounding Precision" <> 0 THEN
"Tax Amount" := ROUND("Tax Amount",GLSetup."VAT Rounding Precision",Direction);
// Delete the following lines.
//IF "Tax Base Amount" <> 0 THEN
// "Tax %" := 100 * (("Tax Base Amount" + "Tax Amount") - "Tax Base Amount") / "Tax Base Amount"
//ELSE
// "Tax %" := 0;
// End of the deleted lines.
END ELSE IF "Transaction Type" = "Transaction Type"::Sale THEN BEGIN
IF ("Export or Deemed Export") THEN
EXIT;
// Delete the following lines.
//LineTaxAmount := IndianSalesTaxCalculate.CalculateTax(
// "Tax Area Code","Tax Group Code",TRUE,"Posting Date",
// "Tax Base Amount",Quantity,0,'');
// End of the deleted lines.
IF LineTaxAmount <> 0 THEN
IndianSalesTaxCalculate.GetVATOpeningSTD(Rec,StandardDeductionAmount,TaxAmount);
"Tax Amount" := TaxAmount - StandardDeductionAmount;
// Delete the following lines.
//IF "Tax Base Amount" <> 0 THEN
// "Tax %" := 100 * (("Tax Base Amount" + "Tax Amount") - "Tax Base Amount") / "Tax Base Amount"
//ELSE
// "Tax %" := 0;
// End of the deleted lines.
"Input Credit/Output Tax Amount" := "Tax Amount";
"Amount Loaded on Item" := 0;
END;
...Aizstāšanas kodu
... IF "Transaction Type" = "Transaction Type"::Purchase THEN BEGIN
// Add the following lines.
LineTaxAmount := IndianSalesTaxCalculate.CalculateTax(
"Tax Area Code","Tax Group Code",TRUE,"Posting Date",
"Tax Base Amount",Quantity,0,'',"Tax %");
// End of the added lines.
IF LineTaxAmount <> 0 THEN
IndianSalesTaxCalculate.GetVATOpeningInputTaxCredit(Rec,"Amount Loaded on Item",
"Input Credit/Output Tax Amount",TRUE,TaxAmount);
"Tax Amount" := TaxAmount;
IF GLSetup."VAT Rounding Precision" <> 0 THEN
"Tax Amount" := ROUND("Tax Amount",GLSetup."VAT Rounding Precision",Direction);
// Add the following lines.
IF "Tax Base Amount" = 0 THEN
"Tax %" := 0;
// End of the added lines.
END ELSE IF "Transaction Type" = "Transaction Type"::Sale THEN BEGIN
IF ("Export or Deemed Export") THEN
EXIT;
// Add the following lines.
LineTaxAmount := IndianSalesTaxCalculate.CalculateTax(
"Tax Area Code","Tax Group Code",TRUE,"Posting Date",
"Tax Base Amount",Quantity,0,'',"Tax %");
// End of the added lines.
IF LineTaxAmount <> 0 THEN
IndianSalesTaxCalculate.GetVATOpeningSTD(Rec,StandardDeductionAmount,TaxAmount);
"Tax Amount" := TaxAmount - StandardDeductionAmount;
// Add the following lines.
IF "Tax Base Amount" = 0 THEN // Add
"Tax %" := 0; // Add
// End of the added lines.
"Input Credit/Output Tax Amount" := "Tax Amount";
"Amount Loaded on Item" := 0;
END;
... -
Nomainiet šo kodu, Indijas aprēķināt PVN koda (13704) šādi:
Kods... Taxamount := TaxBaseAmount * TaxDetail."Tax Below Maximum" / 100;
IF (TaxJurisdiction."Tax Type" = TaxJurisdiction."Tax Type"::VAT) OR
(TaxJurisdiction."Tax Type" = TaxJurisdiction."Tax Type"::CST)
...Aizstāšanas kodu
... Taxamount := TaxBaseAmount * TaxDetail."Tax Below Maximum" / 100;
// Add the following line.
TaxPercent := TaxDetail."Tax Below Maximum";
// End of the added line.
IF (TaxJurisdiction."Tax Type" = TaxJurisdiction."Tax Type"::VAT) OR
(TaxJurisdiction."Tax Type" = TaxJurisdiction."Tax Type"::CST)
...
7. Codeunit 13704 Indian Sales Tax Calculate
Function CalculateTax
Add the below Parameter
VAR TaxPercent Type Decimal
Priekšnosacījumi
Jums jābūt Indijas versijā Microsoft Dynamics NAV 2009. gada 1. servisa pakotne (SP1), lai lietotu šo labojumfailu.
Informācija par noņemšanu
Nevar noņemt šo labojumfailu.
Statuss
Korporācija Microsoft ir apstiprinājusi, ka šī problēma pastāv Microsoft produktos, kas ir minēti sadaļā "Attiecas uz".
Atsauces
VSTF DynamicsNAV SE: 252133
Piezīme. Šis ir STEIDZAMI PUBLICĒJAMS raksts, kas izveidots tieši Microsoft atbalsta organizācijā. Šajā rakstā ietvertā informācija ir sniegta, reaģējot uz nesen konstatētām problēmām. Tā kā šis raksts ir tapis pieejams neilgā laikā, materiālos var būt pareizrakstības kļūdas un tās var tikt labotas jebkurā laikā bez paziņojuma. Skatīt Lietošanas citi apsvērumi.
