A physical disk resource may not come online on a cluster node

Symptoms

On a cluster node that is running Windows Server 2003, Windows Server 2008 or Windows Server 2008 R2, a physical disk resource may enter the Failed state when you try to move a group that contains the physical disk resource. If you restart the cluster node that has the physical disk resource that did not come online, the problem is temporarily resolved.

When this problem occurs, the following entries are logged in the Windows Server 2003 Cluster log for the physical disk resource that entered the failed state:

000020cc.000014d0::2010/01/23-19:40:39.929 ERR Physical Disk <Disk Q:>:
DiskspCheckPath: GetFileAttrs(Q:) returned status of 87.
000020cc.000014d0::2010/01/23-19:40:39.929 WARN Physical Disk <Disk Q:>:
DiskspCheckDriveLetter: Checking drive name (Q:) returns 87
Additionally, the following events are logged in the Windows Server 2003 System Event log: 

Event Type: Error
Event Source: ClusSvc
Event Category: Physical Disk Resource
Event ID: 1066
Date: <date>
Time: <time>
User: N/A
Computer: <node name>
Description: Cluster disk resource "Disk Q:" is corrupt. Run 'ChkDsk /F' to repair problems. The volume name for this resource is "<\\?\Volume{4323d41e-1379-11dd-9538-001e0b20dfe6}\>". If available, ChkDsk output will be in the file "C:\WINDOWS\Cluster\ChkDsk_Disk2_SigB05E593B.log". ChkDsk may write information to the Application Event Log with Event ID 26180.

Event Type: Error
Event Source: ClusSvc
Event Category: Physical Disk Resource
Event ID: 1035
Date: <date>
Time: <time>
User: N/A
Computer: <node name>
Description: Cluster disk resource 'Disk Q:' could not be mounted.

Similarly, on a Windows Server 2008 or Windows Server 2008 R2 cluster nodes you may see following entries are logged in the Cluster log:

00000db0.00000868::2011/12/06-00:43:00.683 WARN  [RES] Physical Disk <Cluster Disk 1>: OnlineThread: Failed to get volume guid for device \\?\GLOBALROOT\Device\Harddisk15\Partition1\. Error 3
00000db0.00000868::2011/12/06-00:43:04.683 WARN  [RES] Physical Disk <Cluster Disk 1>: OnlineThread: Failed to set volguid \??\Volume{3cb36133-0d0b-11df-afcf-005056ab58b9}. Error: 183.
00000db0.00000868::2011/12/06-00:43:04.686 INFO  [RES] Physical Disk <Cluster Disk 1>: VolumeIsNtfs: Volume \\?\GLOBALROOT\Device\Harddisk15\Partition1\ has FS type NTFS

Additionally, following event is logged in the System Event log of Windows Server 2008 or Windows Server 2008 R2:


Cause

This problem is known to occur when antivirus software that is not cluster-aware is installed, upgraded or reconfigured. For example, this problem is known to occur after you install or migrate to Symantec Endpoint Protection 11.0 Release Update 5 (RU5) on the cluster nodes.

For more information about this problem, visit the following Symantec Web site:

Resolution

To resolve this problem, follow these steps:
  1. Verify that this problem is caused by Symantec Endpoint Protection (SEP) 11.0 Release Update 5 (RU5). To do this, run the Handle.exe utility immediately after the issue occurs on the cluster node where the physical disk resource did not come online.

    At an elevated command prompt, type the following command, and then press ENTER:
    Handle.exe -a -u drive_letter
    Note The drive_letter placeholder is the drive designation for the cluster drive that did not come online.

    For example, assume that the drive designation for the cluster drive that did not come online is drive Q. To run the Handle.exe utility in this scenario, type the following command, and then press ENTER:
    Handle.exe -a -u Q:
    The problem is caused by the Symantec application if you receive the following message that identifies the Smc.exe process as the process that owns the handle:
    Handle v3.42
    Copyright (C) 1997-2008 Mark Russinovich
    Sysinternals - www.sysinternals.com

    Smc.exe pid: 856 NT AUTHORITY\SYSTEM 66C: Q:
  2. If the problem is caused by the Symantec application, contact Symantec to obtain Symantec Endpoint Protection 11 Release Update 6 (RU6), which was released to resolve this issue. For more information, visit the following Symantec website:

More Information

For more information about the Handle.exe utility, visit the following Microsoft TechNet Web site: The third-party products that this article discusses are manufactured by companies that are independent of Microsoft. Microsoft makes no warranty, implied or otherwise, about the performance or reliability of these products.

Microsoft provides third-party contact information to help you find technical support. This contact information may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.
Eigenschappen

Artikel-id: 981475 - Laatst bijgewerkt: 8 nov. 2016 - Revisie: 1

Feedback