- The default gateway address is not configured, and your computer is on a private Local Area Network (LAN) that is connected to the Internet. See the "How to Check the Default Gateway Value" topic in the "More Information" section of this article.
- The Never dial a connection option is selected on the Connection tab of the Internet Options dialog box.
- The DHCP server does not have a default gateway configured for the scope that is available to the affected client computer or computers.
- A non-Microsoft provided Network Address Translation (NAT) technology package is in use, that does not provide a default gateway address to connected client computers. This type of technology may also be referred to as Internet Connection Sharing (ICS). Please refer to the "References" section of this article.
- The affected client computer is using static IP addressing, and does not have a default gateway address configured. Please refer to the "How to Check the Default Gateway Value" topic in the "More Information" section of this article.
- The affected client computer is using Automatic Private IP Addressing (APIPA). This occurs if a DHCP server is not available or does not exist on the network. Please refer to the "References" section of this article.
- Manually configure the affected client or clients with an appropriate address for the default gateway. You can do so on the Gateway tab of the TCP/IP Properties for the network adapter that is connected to the LAN. You can view this setting by using the Network tool in Control Panel to view the Configuration tab. Note that you must restart the client computer after you change the indicated value.
- If your LAN has a DHCP server (or ICS/NAT device that provides DHCP services), configure the DHCP options for the applicable scope with an appropriate IP address for the default gateway.
How to Check the Default Gateway Value
- Click Start, click Run, type winipcfg, and then click OK.
- Click your network adapter, and then click More Info.
- If the default gateway is blank, the value is not configured.
Impact of an Unconfigured Default Gateway ValueIf the default gateway is not configured, the following networking functions may be impacted (note that this does not generally apply to the local subnet):
- Log on authentication may fail, if the Client for Microsoft Networks is configured for log on to a Microsoft Windows NT domain in the Network tool in Control Panel, and the authenticating server is located on a different subnet than your client computer.
- Network name resolution may also be affected, if Windows Internet Name Service (WINS) or Domain Naming System (DNS) servers are located on a different subnet than your client computer.
- While it may be possible to browse the network (by using the Entire Network icon in My Network Places, or by using the net view command), attempts to connect to a target computer that is located on a different subnet than your client computer generally fail.
- Specific MS-DOS commands, including net use, net view, ping, and so on, may not function as expected.
Default Gateway Address OptionsThe following list that describes default gateway address options is provided for your convenience, and may not include an optimal choice for your LAN configuration. Note that it does not include security or firewall services considerations.
- A significant number of small networks may be connected to the Internet by using a device that provides DHCP, as well as NAT (or ICS) services. A device of this type is the logical choice for the default gateway.
- If your LAN is connected to the Internet by using a router, and consists of a single subnet, the router IP address is normally the appropriate value for the default gateway.
- In some configurations, it may be necessary to use an IP address that is provided by your Internet Service Provider (ISP).
- It is possible to configure an invalid, or non-existent default gateway address for clients on the applicable subnet, or subnets. This causes all attempts to access network resources that are outside of the local subnet to fail. Use at your own risk.
Artikel-id: 315035 - Laatst bijgewerkt: 19 jun. 2014 - Revisie: 1