This article was previously published under Q325031
This article has been archived. It is offered "as is" and will no longer be updated.
While an Infrared (IR) file transfer is occurring in Windows 2000, the receiving computer may enter Standby if the CPU utilization is low enough.
One or both of the following conditions exist:
The receiving computer has a very fast CPU such as a 1 GHz or faster CPU.
The IR connection between the two computers is operating at a low transfer rate such as 57,600 bps or slower.
Under these conditions, the CPU activity that is required to continue receive the data may be very low. Because of this, the receiving computer may enter Standby while the transfer is still occurring. The CPU activity that is required to continue to receive data may be as low as 12 percent or less, and you can view this amount with Task Manager or System Monitor.
On Windows 2000, the Infrared transfer utility (Irmon.dll) does not signal the system to indicate that it is "active" while it is receiving a file by using an IR connection. If no user input occurs and the CPU utilization remains below a threshold of approximately 12 percent, the system appears to be in an "idle" state. The computer then enters Standby after the specified period of time passes.
Service Pack Information
To resolve this problem, obtain the latest service pack for Microsoft Windows 2000. For additional information, click the following article number to view the article in the Microsoft Knowledge Base:
260910 How to Obtain the Latest Windows 2000 Service Pack
A supported hotfix is available from Microsoft. However, this hotfix is intended to correct only the problem that is described in this article. Apply this hotfix only to systems that are experiencing this specific problem.
If the hotfix is available for download, there is a "Hotfix download available" section at the top of this Knowledge Base article. If this section does not appear, submit a request to Microsoft Customer Service and Support to obtain the hotfix.
Note If additional issues occur or if any troubleshooting is required, you might have to create a separate service request. The usual support costs will apply to additional support questions and issues that do not qualify for this specific hotfix. For a complete list of Microsoft Customer Service and Support telephone numbers or to create a separate service request, visit the following Microsoft Web site:
Note The "Hotfix download available" form displays the languages for which the hotfix is available. If you do not see your language, it is because a hotfix is not available for that language. The English version of this fix has the file attributes (or later) that are listed in the following table. The dates and times for these files are listed in coordinated universal time (UTC). When you view the file information, it is converted to local time. To find the difference between UTC and local time, use the Time Zone tab in the Date and Time tool in Control Panel.
Date Time Version Size File name ---------------------------------------------------- 01-Jul-2002 22:06 5.0.2195.5922 79,632 Irmon.dll
Microsoft has confirmed that this is a problem in the Microsoft products that are listed at the beginning of this article. This problem was first corrected in Microsoft Windows 2000 Service Pack 4.This problem was corrected in Microsoft Windows XP.
For additional information about how to obtain a hotfix for Windows 2000 Datacenter Server, click the article number below to view the article in the Microsoft Knowledge Base:
265173 The Datacenter Program and Windows 2000 Datacenter Server Product
For additional information about how to install multiple hotfixes with only one reboot, click the article number below to view the article in the Microsoft Knowledge Base:
296861 Use QChain.exe to Install Multiple Hotfixes with One Reboot