Przejdź do głównej zawartości
Pomoc techniczna
Zaloguj się przy użyciu konta Microsoft
Zaloguj się lub utwórz konto.
Witaj,
Wybierz inne konto.
Masz wiele kont
Wybierz konto, za pomocą którego chcesz się zalogować.

Objawy

Wszystkie wartości są puste w kolumnie Debet , podczas eksportowania w formacie programu Excel w hiszpańskiej wersji systemu Microsoft Dynamics NAV 2009 RTC dostawcy - raport szczegółowy bilans próbny (304). Jednak to działa dobrze w hiszpańskiej wersji systemu Microsoft Dynamics NAV 2013. Wykonaj kroki opisane w sekcji zmiany kodu , aby rozwiązać ten problem. Ten problem występuje w następujących produktach:

  • W wersji hiszpańskiej dla systemu Microsoft Dynamics NAV 2009 R2

  • W wersji hiszpańskiej dla dodatku SP1 dla programu Microsoft Dynamics NAV 2009

Rozwiązanie

Informacje o poprawce

Obsługiwana poprawka jest obecnie udostępniana przez firmę Microsoft. Jednak to jest przeznaczona tylko do usunięcia problemu opisanego w tym artykule. Zastosuj ją tylko w systemach, w których występuje ten problem. Ta poprawka może być wciąż w fazie testowania. Jeśli dany system nie jest poważnie narażony na ten problem, firma Microsoft zaleca, aby poczekać na następny dodatek service pack dla systemu Microsoft Dynamics NAV 2009 lub następną wersję systemu Microsoft Dynamics NAV, zawierający tę poprawkę.

Uwaga W wyjątkowych przypadkach opłaty, telefonujący do pomocy technicznej mogą zostać anulowane, jeśli pomocy technicznej dla systemu Microsoft Dynamics i produktów powiązanych Określa, że określonej aktualizacji, można rozwiązać swój problem. Koszty obsługi zwykłych zastosuje się do dodatkowych pytań i problemów, których nie można rozwiązać przy użyciu określonej aktualizacji.

Informacje dotyczące instalacji

Firma Microsoft podaje przykłady programowania wyłącznie, bez jakichkolwiek gwarancji wyrażonych wprost lub domyślnie. To obejmuje, ale nie jest ograniczona, ustawowej rękojmi co do przydatności handlowej lub przydatności do określonego celu. W tym artykule założono, że użytkownik zna demonstrowany język programowania oraz narzędzia, które są używane do tworzenia i debugowania procedur. Wykwalifikowani pracownicy pomocy technicznej firmy Microsoft mogą pomóc w wyjaśnieniu, jak działa określona procedura. Nie będą jednak modyfikować tych przykładów ani dodawać funkcjonalności i konstruować procedur w celu zaspokojenia określonych potrzeb użytkownika.

Uwaga Przed zainstalowaniem tej poprawki należy zweryfikować, że wszyscy użytkownicy klienta systemu Microsoft Dynamics NAV są wylogowani systemu. Obejmuje to usług systemu Microsoft Dynamics NAV aplikacji serwera (NAS). Powinny być użytkownika klienta, który jest zalogowany w momencie wdrożyć tę poprawkę.

Aby wdrożyć tę poprawkę, musi mieć licencję deweloperską.

Firma Microsoft zaleca, aby do konta użytkownika w oknie identyfikatorów logowania systemu Windows lub w oknie identyfikatorów logowania bazy danych być przypisany identyfikator roli "SUPER". Jeśli konto użytkownika nie można przypisać Identyfikatora roli "SUPER", należy sprawdzić, czy konto użytkownika ma następujące uprawnienia:

  • Uprawnienie Modyfikacja dla obiektu, który będzie zmieniany.

  • Uprawnienie Execute obiektu 5210 identyfikator obiektu systemu i 9015 identyfikator obiektu systemu

    obiekt.

Uwaga Nie trzeba mieć prawa do magazynów danych, chyba że konieczne jest przeprowadzenie naprawy danych.

Zmiany kodu

Uwaga Zawsze test poprawki kodu w kontrolowanym środowisku przed zastosowaniem poprawki na komputerach produkcyjnych.

Aby rozwiązać ten problem, Zmień kod w dostawcy - raport szczegółowy bilans próbny (304) w następujący sposób:

...<PaddingTop>2pt</PaddingTop>
</Style>
<Value>=Fields!Detailed_Vendor_Ledg__Entry__Entry_Type_.Value</Value>
<ZIndex>131</ZIndex>
<rd:DefaultName>textbox105</rd:DefaultName>
</Textbox>
</ReportItems>
</TableCell>
<TableCell>
<ReportItems>

// Add the following lines.
<Textbox Name="textbox176">
<CanGrow>true</CanGrow>
<Style>
<FontSize>7pt</FontSize>
<PaddingBottom>2pt</PaddingBottom>
<PaddingLeft>2pt</PaddingLeft>
<PaddingRight>2pt</PaddingRight>
<PaddingTop>2pt</PaddingTop>
</Style>
<Value />
<rd:DefaultName>textbox176</rd:DefaultName>
</Textbox>
</ReportItems>
</TableCell>
<TableCell>
<ReportItems>
// End of the added lines.

<Textbox Name="textbox21">
<CanGrow>true</CanGrow>
<Style>
<FontSize>7pt</FontSize>
<Format>=Fields!DebitCorrectionFormat.Value</Format>
<PaddingBottom>2pt</PaddingBottom>
<PaddingLeft>2pt</PaddingLeft>
<PaddingRight>2pt</PaddingRight>
<PaddingTop>2pt</PaddingTop>
</Style>
...
...
<PaddingRight>2pt</PaddingRight>
<PaddingTop>2pt</PaddingTop>
</Style>
<Value>=Fields!Detailed_Vendor_Ledg__Entry2__Entry_Type_.Value</Value>
<ZIndex>7</ZIndex>
</Textbox>
</ReportItems>
</TableCell>
<TableCell>
<ReportItems>

// Add the following lines.
<Textbox Name="textbox177">
<CanGrow>true</CanGrow>
<Style>
<FontSize>7pt</FontSize>
<PaddingBottom>2pt</PaddingBottom>
<PaddingLeft>2pt</PaddingLeft>
<PaddingRight>2pt</PaddingRight>
<PaddingTop>2pt</PaddingTop>
</Style>
<Value />
<rd:DefaultName>textbox177</rd:DefaultName>
</Textbox>
</ReportItems>
</TableCell>
<TableCell>
<ReportItems>
// End of the added lines.

<Textbox Name="textbox29">
<CanGrow>true</CanGrow>
<Style>
<FontSize>7pt</FontSize>
<Format>=Fields!DebitApplicationRoundingFormat.Value</Format>
<PaddingBottom>2pt</PaddingBottom>
<PaddingLeft>2pt</PaddingLeft>
<PaddingRight>2pt</PaddingRight>
<PaddingTop>2pt</PaddingTop>
</Style>
...
...
<PaddingTop>2pt</PaddingTop>
<VerticalAlign>Bottom</VerticalAlign>
</Style>
<Value>=First(Fields!Vendor_Ledger_Entry_DescriptionCaption.Value)</Value>
<ZIndex>204</ZIndex>
</Textbox>
</ReportItems>
</TableCell>
<TableCell>
<ReportItems>

// Add the following lines.
<Textbox Name="textbox118">
<CanGrow>true</CanGrow>
<Style>
<FontSize>7pt</FontSize>
<FontWeight>700</FontWeight>
<PaddingBottom>2pt</PaddingBottom>
<PaddingLeft>0.075cm</PaddingLeft>
<PaddingRight>0.075cm</PaddingRight>
<PaddingTop>2pt</PaddingTop>
<VerticalAlign>Bottom</VerticalAlign>
</Style>
<Value />
<rd:DefaultName>textbox118</rd:DefaultName>
</Textbox>
</ReportItems>
</TableCell>
<TableCell>
<ReportItems>
// End of the added lines.

<Textbox Name="TextBox136">
<Style>
<FontSize>7pt</FontSize>
<PaddingBottom>2pt</PaddingBottom>
<PaddingLeft>2pt</PaddingLeft>
<PaddingRight>2pt</PaddingRight>
<PaddingTop>2pt</PaddingTop>
<TextAlign>Right</TextAlign>
<VerticalAlign>Bottom</VerticalAlign>
</Style>
...
...
<Value>=Fields!CurrReport_PAGENOCaption.Value</Value>
<Visibility>
<Hidden>true</Hidden>
</Visibility>
<ZIndex>193</ZIndex>
</Textbox>
</ReportItems>
</TableCell>
<TableCell>
<ReportItems>

// Add the following lines.
<Textbox Name="textbox168">
<CanGrow>true</CanGrow>
<Style>
<Color>#ff0000</Color>
<PaddingBottom>2pt</PaddingBottom>
<PaddingLeft>2pt</PaddingLeft>
<PaddingRight>2pt</PaddingRight>
<PaddingTop>2pt</PaddingTop>
<VerticalAlign>Middle</VerticalAlign>
</Style>
<Value />
<rd:DefaultName>textbox168</rd:DefaultName>
</Textbox>
</ReportItems>
</TableCell>
<TableCell>
<ReportItems>
// End of the added lines.

<Textbox Name="AmountsLCY">
<CanGrow>true</CanGrow>
<Style>
<Color>#ff0000</Color>
<PaddingBottom>2pt</PaddingBottom>
<PaddingLeft>2pt</PaddingLeft>
<PaddingRight>2pt</PaddingRight>
<PaddingTop>2pt</PaddingTop>
<VerticalAlign>Middle</VerticalAlign>
</Style>
...
...

<TableColumn>
<Width>0.8cm</Width>
</TableColumn>
<TableColumn>
<Width>1.3cm</Width>
</TableColumn>
<TableColumn>
<Width>3.1cm</Width>
</TableColumn>
<TableColumn>

// Add the following line.
<Width>0.01cm</Width>
</TableColumn>
<TableColumn>
// End of the added line.

<Width>1.8cm</Width>
</TableColumn>
<TableColumn>
<Width>1.8cm</Width>
</TableColumn>
<TableColumn>
<Width>1.85cm</Width>
</TableColumn>
<TableColumn>
<Width>1.9cm</Width>
...
...
<PaddingTop>2pt</PaddingTop>
</Style>
<Value />
<ZIndex>90</ZIndex>
<rd:DefaultName>textbox4</rd:DefaultName>
</Textbox>
</ReportItems>
</TableCell>
<TableCell>
<ReportItems>

// Add the following lines.
<Textbox Name="textbox186">
<CanGrow>true</CanGrow>
<Style>
<FontSize>7pt</FontSize>
<PaddingBottom>2pt</PaddingBottom>
<PaddingLeft>2pt</PaddingLeft>
<PaddingRight>2pt</PaddingRight>
<PaddingTop>2pt</PaddingTop>
</Style>
<Value />
<rd:DefaultName>textbox186</rd:DefaultName>
</Textbox>
</ReportItems>
</TableCell>
<TableCell>
<ReportItems>
// End of the added lines.

<Textbox Name="textbox5">
<Style>
<FontSize>7pt</FontSize>
<PaddingBottom>2pt</PaddingBottom>
<PaddingLeft>2pt</PaddingLeft>
<PaddingRight>2pt</PaddingRight>
<PaddingTop>2pt</PaddingTop>
</Style>
<Value />
<ZIndex>89</ZIndex>
...
...

<PaddingTop>2pt</PaddingTop>
</Style>
<Value />
<ZIndex>98</ZIndex>
<rd:DefaultName>textbox191</rd:DefaultName>
</Textbox>
</ReportItems>
</TableCell>
<TableCell>
<ReportItems>

// Add the following lines.
<Textbox Name="textbox187">
<CanGrow>true</CanGrow>
<Style>
<FontSize>7pt</FontSize>
<PaddingBottom>2pt</PaddingBottom>
<PaddingLeft>2pt</PaddingLeft>
<PaddingRight>2pt</PaddingRight>
<PaddingTop>2pt</PaddingTop>
</Style>
<Value />
rd:DefaultName>textbox187</rd:DefaultName>
</Textbox>
</ReportItems>
</TableCell>
<TableCell>
<ReportItems>
// End of the added lines.

<Textbox Name="textbox98">
<CanGrow>true</CanGrow>
<Style>
<FontSize>7pt</FontSize>
<Format>=Fields!StartVendDebitAmountAdj_Control1100154Format.Value</Format>
<PaddingBottom>2pt</PaddingBottom>
<PaddingLeft>2pt</PaddingLeft>
<PaddingRight>2pt</PaddingRight>
<PaddingTop>2pt</PaddingTop>
<TextAlign>Right</TextAlign>
...
...
<PaddingTop>2pt</PaddingTop>
</Style>
<Value />
<ZIndex>106</ZIndex>
<rd:DefaultName>textbox206</rd:DefaultName>
</Textbox>
</ReportItems>
</TableCell>
<TableCell>
<ReportItems>

// Add the following lines.
<Textbox Name="textbox188">
<CanGrow>true</CanGrow>
<Style>
<FontSize>7pt</FontSize>
<PaddingBottom>2pt</PaddingBottom>
<PaddingLeft>2pt</PaddingLeft>
<PaddingRight>2pt</PaddingRight>
<PaddingTop>2pt</PaddingTop>
</Style>
<Value />
<rd:DefaultName>textbox188</rd:DefaultName>
</Textbox>
</ReportItems>
</TableCell>
<TableCell>
<ReportItems>
// End of the added lines.

<Textbox Name="textbox107">
<CanGrow>true</CanGrow>
<Style>
<FontSize>7pt</FontSize>
<Format>=Fields!StartVendDebitAmount___DebitCorrection___DebitApplicationRoundingFormat.Value</Format>
<PaddingBottom>2pt</PaddingBottom>
<PaddingLeft>2pt</PaddingLeft>
<PaddingRight>2pt</PaddingRight>
<PaddingTop>2pt</PaddingTop>
<TextAlign>Right</TextAlign>
...
...

<PaddingTop>2pt</PaddingTop>
</Style>
<Value />
<ZIndex>114</ZIndex>
<rd:DefaultName>textbox221</rd:DefaultName>
</Textbox>
</ReportItems>
</TableCell>
<TableCell>
<ReportItems>

// Add the following lines.
Textbox Name="textbox189">
<CanGrow>true</CanGrow>
<Style>
<FontSize>7pt</FontSize>
<PaddingBottom>2pt</PaddingBottom>
<PaddingLeft>2pt</PaddingLeft>
<PaddingRight>2pt</PaddingRight>
<PaddingTop>2pt</PaddingTop>
</Style>
<Value />
<rd:DefaultName>textbox189</rd:DefaultName>
</Textbox>
</ReportItems>
</TableCell>
<TableCell>
<ReportItems>
// End of the added lines.

<Textbox Name="textbox222">
<Style>
<FontSize>7pt</FontSize>
<PaddingBottom>2pt</PaddingBottom>
<PaddingLeft>2pt</PaddingLeft>
<PaddingRight>2pt</PaddingRight>
<PaddingTop>2pt</PaddingTop>
</Style>
<Value />
<ZIndex>113</ZIndex>
...
...

<PaddingTop>2pt</PaddingTop>
</Style>
<Value />
<ZIndex>122</ZIndex>
<rd:DefaultName>textbox236</rd:DefaultName>
</Textbox>
</ReportItems>
</TableCell>
<TableCell>
<ReportItems>

// Add the following lines.
<Textbox Name="textbox192">
<CanGrow>true</CanGrow>
<Style>
<FontSize>7pt</FontSize>
<PaddingBottom>2pt</PaddingBottom>
<PaddingLeft>2pt</PaddingLeft>
<PaddingRight>2pt</PaddingRight>
<PaddingTop>2pt</PaddingTop>
</Style>
<Value />
rd:DefaultName>textbox192</rd:DefaultName>
</Textbox>
</ReportItems>
</TableCell>
<TableCell>
<ReportItems>
// End of the added lines.

<Textbox Name="textbox127">
<CanGrow>true</CanGrow>
<Style>
<FontSize>7pt</FontSize>
<Format>=Fields!StartVendDebitAmount___DebitCorrection___DebitApplicationRoundingFormat.Value</Format>
<PaddingBottom>2pt</PaddingBottom>
<PaddingLeft>2pt</PaddingLeft>
<PaddingRight>2pt</PaddingRight>
<PaddingTop>2pt</PaddingTop>
<TextAlign>Right</TextAlign>
...
...

<PaddingRight>2pt</PaddingRight>
<PaddingTop>2pt</PaddingTop>
</Style>
<Value />
<ZIndex>49</ZIndex>
</Textbox>
</ReportItems>
</TableCell>
<TableCell>
<ReportItems>

// Add the following lines.
Textbox Name="textbox181">
<CanGrow>true</CanGrow>
<Style>
<FontSize>7pt</FontSize>
<PaddingBottom>2pt</PaddingBottom>
<PaddingLeft>2pt</PaddingLeft>
<PaddingRight>2pt</PaddingRight>
<PaddingTop>2pt</PaddingTop>
</Style>
<Value />
<rd:DefaultName>textbox181</rd:DefaultName>
</Textbox>
</ReportItems>
</TableCell>
<TableCell>
<ReportItems>
// End of the added lines.

<Textbox Name="textbox56">
<Style>
<FontSize>7pt</FontSize>
<PaddingBottom>2pt</PaddingBottom>
<PaddingLeft>2pt</PaddingLeft>
<PaddingRight>2pt</PaddingRight>
<PaddingTop>2pt</PaddingTop>
</Style>
<Value />
<ZIndex>48</ZIndex>
...
...

<PaddingRight>2pt</PaddingRight>
<PaddingTop>2pt</PaddingTop>
</Style>
<Value />
<ZIndex>57</ZIndex>
</Textbox>
</ReportItems>
</TableCell>
<TableCell>
<ReportItems>

// Add the following lines.
<Textbox Name="textbox182">
<CanGrow>true</CanGrow>
<Style>
<FontSize>7pt</FontSize>
<PaddingBottom>2pt</PaddingBottom>
<PaddingLeft>2pt</PaddingLeft>
<PaddingRight>2pt</PaddingRight>
<PaddingTop>2pt</PaddingTop>
</Style>
<Value />
<rd:DefaultName>textbox182</rd:DefaultName>
</Textbox>
</ReportItems>
</TableCell>
<TableCell>
<ReportItems>
// End of the added lines.

<Textbox Name="textbox166">
<CanGrow>true</CanGrow>
<Style>
<FontSize>7pt</FontSize>
<Format>=Fields!StartVendDebitAmountAdj_Control1100154Format.Value</Format>
<PaddingBottom>2pt</PaddingBottom>
<PaddingLeft>2pt</PaddingLeft>
<PaddingRight>2pt</PaddingRight>
<PaddingTop>2pt</PaddingTop>
<TextAlign>Right</TextAlign>
...
...

<PaddingRight>2pt</PaddingRight>
<PaddingTop>2pt</PaddingTop>
</Style>
<Value />
<ZIndex>65</ZIndex>
</Textbox>
</ReportItems>
</TableCell>
<TableCell>
<ReportItems>

// Add the following lines.
<Textbox Name="textbox183">
<CanGrow>true</CanGrow>
<Style>
<FontSize>7pt</FontSize>
<PaddingBottom>2pt</PaddingBottom>
<PaddingLeft>2pt</PaddingLeft>
<PaddingRight>2pt</PaddingRight>
<PaddingTop>2pt</PaddingTop>
</Style>
<Value />
<rd:DefaultName>textbox183</rd:DefaultName>
</Textbox>
</ReportItems>
</TableCell>
<TableCell>
<ReportItems>
// End of the added lines.

<Textbox Name="textbox53">
<CanGrow>true</CanGrow>
<Style>
<FontSize>7pt</FontSize>
<Format>=Fields!StartVendDebitAmount___DebitCorrection___DebitApplicationRoundingFormat.Value</Format>
<PaddingBottom>2pt</PaddingBottom>
<PaddingLeft>2pt</PaddingLeft>
<PaddingRight>2pt</PaddingRight>
<PaddingTop>2pt</PaddingTop>
<TextAlign>Right</TextAlign>

...
...

<PaddingRight>2pt</PaddingRight>
<PaddingTop>2pt</PaddingTop>
</Style>
<Value />
<rd:DefaultName>textbox150</rd:DefaultName>
</Textbox>
</ReportItems>
</TableCell>
<TableCell>
<ReportItems>

// Add the following lines.
<Textbox Name="textbox184">
<CanGrow>true</CanGrow>
<Style>
<PaddingBottom>2pt</PaddingBottom>
<PaddingLeft>2pt</PaddingLeft>
<PaddingRight>2pt</PaddingRight>
<PaddingTop>2pt</PaddingTop>
</Style>
<Value />
<rd:DefaultName>textbox184</rd:DefaultName>
</Textbox>
</ReportItems>
</TableCell>
<TableCell>
<ReportItems>
// End of the added lines.

<Textbox Name="textbox71">
<CanGrow>true</CanGrow>
<Style>
<PaddingBottom>2pt</PaddingBottom>
<PaddingLeft>2pt</PaddingLeft>
<PaddingRight>2pt</PaddingRight>
<PaddingTop>2pt</PaddingTop>
</Style>
<Value />
<rd:DefaultName>textbox71</rd:DefaultName>

...
...
<PaddingRight>2pt</PaddingRight>
<PaddingTop>2pt</PaddingTop>
</Style>
<Value />
<rd:DefaultName>textbox133</rd:DefaultName>
</Textbox>
</ReportItems>
</TableCell>
<TableCell>
<ReportItems>

// Add the following lines.
<Textbox Name="textbox185">
<CanGrow>true</CanGrow>
<Style>
<PaddingBottom>2pt</PaddingBottom>
<PaddingLeft>2pt</PaddingLeft>
<PaddingRight>2pt</PaddingRight>
<PaddingTop>2pt</PaddingTop>
</Style>
<Value />
<rd:DefaultName>textbox185</rd:DefaultName>
</Textbox>
</ReportItems>
</TableCell>
<TableCell>
<ReportItems>
// End of the added lines.

<Textbox Name="textbox117">
<CanGrow>true</CanGrow>
<Style>
<FontSize>7pt</FontSize>
<Format>=Fields!StartVendDebitAmount___DebitCorrection___DebitApplicationRoundingFormat.Value</Format>
<PaddingBottom>2pt</PaddingBottom>
<PaddingLeft>2pt</PaddingLeft>
<PaddingRight>2pt</PaddingRight>
<PaddingTop>2pt</PaddingTop>
<TextAlign>...
...

<PaddingTop>2pt</PaddingTop>
</Style>
<Value>=LAST(Fields!Vendor_Name_Control27.Value)</Value>
<ZIndex>18</ZIndex>
<rd:DefaultName>textbox251</rd:DefaultName>
</Textbox>
</ReportItems>
</TableCell>
<TableCell>
<ReportItems>

// Add the following lines.
<Textbox Name="textbox178">
<CanGrow>true</CanGrow>
<Style>
<FontSize>7pt</FontSize>
<FontWeight>700</FontWeight>
<PaddingBottom>2pt</PaddingBottom>
<PaddingLeft>2pt</PaddingLeft>
<PaddingRight>2pt</PaddingRight>
<PaddingTop>2pt</PaddingTop>
</Style>
<Value />
<rd:DefaultName>textbox178</rd:DefaultName>
</Textbox>
</ReportItems>
</TableCell>
<TableCell>
<ReportItems>
// End of the added lines.

<Textbox Name="textbox253">
<Style>
<FontSize>7pt</FontSize>
<PaddingBottom>2pt</PaddingBottom>
<PaddingLeft>2pt</PaddingLeft>
<PaddingRight>2pt</PaddingRight>
<PaddingTop>2pt</PaddingTop>
</Style>
<Value />
<ZIndex>17</ZIndex>

...
...

<PaddingTop>2pt</PaddingTop>
</Style>
<Value>=LAST(Fields!Vendor_Name_Control27.Value)</Value>
<ZIndex>28</ZIndex>
<rd:DefaultName>textbox38</rd:DefaultName>
</Textbox>
</ReportItems>
</TableCell>
<TableCell>
<ReportItems>

// Add the following lines.
<Textbox Name="textbox179">
<CanGrow>true</CanGrow>
<Style>
<FontSize>7pt</FontSize>
<FontWeight>700</FontWeight>
<PaddingBottom>2pt</PaddingBottom>
<PaddingLeft>2pt</PaddingLeft>
<PaddingRight>2pt</PaddingRight>
<PaddingTop>2pt</PaddingTop>
</Style>
<Value />
<rd:DefaultName>textbox179</rd:DefaultName>
</Textbox>
</ReportItems>
</TableCell>
<TableCell>
<ReportItems>
// End of the added lines.

<Textbox Name="textbox31">
<CanGrow>true</CanGrow>
<Style>
<FontSize>7pt</FontSize>
<Format>=Last(Fields!VendBalanceLCY___StartVendDebitAmount___StartVendDebitAmountAdjFormat.Value)</Format>
<PaddingBottom>2pt</PaddingBottom>
<PaddingLeft>2pt</PaddingLeft>
<PaddingRight>2pt</PaddingRight>
<PaddingTop>2pt</PaddingTop>
</Style>

...
...
<PaddingTop>2pt</PaddingTop>
</Style>
<Value />
<ZIndex>38</ZIndex>
<rd:DefaultName>textbox59</rd:DefaultName>
</Textbox>
</ReportItems>
</TableCell>
<TableCell>
<ReportItems>

// Add the following lines.
<Textbox Name="textbox180">
<CanGrow>true</CanGrow>
<Style>
<FontSize>7pt</FontSize>
<FontWeight>700</FontWeight>
<PaddingBottom>2pt</PaddingBottom>
<PaddingLeft>2pt</PaddingLeft>
<PaddingRight>2pt</PaddingRight>
<PaddingTop>2pt</PaddingTop>
</Style>
<Value />
<rd:DefaultName>textbox180</rd:DefaultName>
</Textbox>
</ReportItems>
</TableCell>
<TableCell>
<ReportItems>
// End of the added lines.

<Textbox Name="textbox60">
<Style>
<FontSize>7pt</FontSize>
<PaddingBottom>2pt</PaddingBottom>
<PaddingLeft>2pt</PaddingLeft>
<PaddingRight>2pt</PaddingRight>
<PaddingTop>2pt</PaddingTop>
</Style>
<Value />
<ZIndex>37</ZIndex>

...
...

<PaddingTop>2pt</PaddingTop>
</Style>
<Value>=Fields!Vendor_Name.Value</Value>
<ZIndex>184</ZIndex>
<rd:DefaultName>textbox43</rd:DefaultName>
</Textbox>
</ReportItems>
</TableCell>
<TableCell>
<ReportItems>

// Add the following lines.
<Textbox Name="textbox171">
<CanGrow>true</CanGrow>
<Style>
<FontSize>7pt</FontSize>
<FontWeight>700</FontWeight>
<PaddingBottom>2pt</PaddingBottom>
<PaddingLeft>2pt</PaddingLeft>
<PaddingRight>2pt</PaddingRight>
<PaddingTop>2pt</PaddingTop>
</Style>
<Value />
<rd:DefaultName>textbox171</rd:DefaultName>
</Textbox>
</ReportItems>
</TableCell>
<TableCell>
<ReportItems>
// End of the added lines.

<Textbox Name="textbox46">
<Style>
<FontSize>7pt</FontSize>
<PaddingBottom>2pt</PaddingBottom>
<PaddingLeft>2pt</PaddingLeft>
<PaddingRight>2pt</PaddingRight>
<PaddingTop>2pt</PaddingTop>
</Style>
<Value />
<ZIndex>183</ZIndex>

...
...
<PaddingTop>2pt</PaddingTop>
</Style>
<Value>=Fields!Vendor__Phone_No__.value</Value>
<ZIndex>174</ZIndex>
<rd:DefaultName>textbox75</rd:DefaultName>
</Textbox>
</ReportItems>
</TableCell>
<TableCell>
<ReportItems>

// Add the following lines.
<Textbox Name="textbox172">
<CanGrow>true</CanGrow>
<Style>
<FontSize>7pt</FontSize>
<PaddingBottom>2pt</PaddingBottom>
<PaddingLeft>2pt</PaddingLeft>
<PaddingRight>2pt</PaddingRight>
<PaddingTop>2pt</PaddingTop>
</Style>
<Value />
<rd:DefaultName>textbox172</rd:DefaultName>
</Textbox>
</ReportItems>
</TableCell>
<TableCell>
<ReportItems>
// End of the added lines.

<Textbox Name="textbox76">
<Style>
<FontSize>7pt</FontSize>
<PaddingBottom>2pt</PaddingBottom>
<PaddingLeft>2pt</PaddingLeft>
<PaddingRight>2pt</PaddingRight>
<PaddingTop>2pt</PaddingTop>
</Style>
<Value />
<ZIndex>173</ZIndex>

...
...
<PaddingTop>2pt</PaddingTop>
</Style>
<Value />
<ZIndex>163</ZIndex>
<rd:DefaultName>textbox90</rd:DefaultName>
</Textbox>
</ReportItems>
</TableCell>
<TableCell>
<ReportItems>

// Add the following lines.
<Textbox Name="textbox173">
<CanGrow>true</CanGrow>
<Style>
<FontSize>7pt</FontSize>
<PaddingBottom>2pt</PaddingBottom>
<PaddingLeft>2pt</PaddingLeft>
<PaddingRight>2pt</PaddingRight>
<PaddingTop>2pt</PaddingTop>
</Style>
<Value />
<rd:DefaultName>textbox173</rd:DefaultName>
</Textbox>
</ReportItems>
</TableCell>
<TableCell>
<ReportItems>
// End of the added lines.

<Textbox Name="textbox91">
<Style>
<FontSize>7pt</FontSize>
<PaddingBottom>2pt</PaddingBottom>
<PaddingLeft>2pt</PaddingLeft>
<PaddingRight>2pt</PaddingRight>
<PaddingTop>2pt</PaddingTop>
</Style>
<Value />
<ZIndex>162</ZIndex>

...
...

<PaddingTop>2pt</PaddingTop>
</Style>
<Value>=Fields!Adj__of_Opening_BalanceCaption.Value</Value>
<ZIndex>153</ZIndex>
<rd:DefaultName>textbox104</rd:DefaultName>
</Textbox>
</ReportItems>
</TableCell>
<TableCell>
<ReportItems>

// Add the following lines
<Textbox Name="textbox174">
<CanGrow>true</CanGrow>
<Style>
<FontSize>7pt</FontSize>
<PaddingBottom>2pt</PaddingBottom>
<PaddingLeft>2pt</PaddingLeft>
<PaddingRight>2pt</PaddingRight>
<PaddingTop>2pt</PaddingTop>
</Style>
<Value />
<rd:DefaultName>textbox174</rd:DefaultName>
</Textbox>
</ReportItems>
</TableCell>
<TableCell>
<ReportItems>
// End of the added lines.

<Textbox Name="textbox13">
<CanGrow>true</CanGrow>
<Style>
<FontSize>7pt</FontSize>
<Format>=Fields!StartVendDebitAmountAdjFormat.Value</Format>
<PaddingBottom>2pt</PaddingBottom>
<PaddingLeft>2pt</PaddingLeft>
<PaddingRight>2pt</PaddingRight>
<PaddingTop>2pt</PaddingTop>
</Style>

...
...

<Value>=Fields!Vendor_Ledger_Entry_Description.Value</Value>
<Width>2.3cm</Width>
<rd:DefaultName>textbox19</rd:DefaultName>
</Textbox>
</ReportItems>
</Rectangle>
</ReportItems>
</TableCell>
<TableCell>
<ReportItems>

// Add the following lines.
<Textbox Name="textbox175">
<CanGrow>true</CanGrow>
<Style>
<PaddingBottom>2pt</PaddingBottom>
<PaddingLeft>2pt</PaddingLeft>
<PaddingRight>2pt</PaddingRight>
<PaddingTop>2pt</PaddingTop>
</Style>
<Value />
<rd:DefaultName>textbox175</rd:DefaultName>
</Textbox>
</ReportItems>
</TableCell>
<TableCell>
<ReportItems>
// End of the added lines.

<Textbox Name="textbox28">
<Style>
<FontSize>7pt</FontSize>
<Format>=Fields!VendDebitAmountFormat.Value</Format>
<PaddingBottom>2pt</PaddingBottom>
<PaddingLeft>2pt</PaddingLeft>
<PaddingRight>2pt</PaddingRight>
<PaddingTop>2pt</PaddingTop>
</Style>
<Value>=Fields!VendDebitAmount.Value</Value>
...


Wymagania wstępne

Musi mieć jedną z następujących produktów, w celu zastosowania tej poprawki:

  • W wersji hiszpańskiej dla systemu Microsoft Dynamics NAV 2009 R2

  • W wersji hiszpańskiej dla dodatku SP1 dla programu Microsoft Dynamics NAV 2009

Informacje dotyczące usuwania

Nie można usunąć tej poprawki.

Stan

Firma Microsoft potwierdziła, że jest to problem występujący w produktach firmy Microsoft wymienionych w sekcji „Dotyczy”.

Uwaga Jest to artykuł " szybkiej publikacji" tworzony bezpośrednio przez organizację pomocy technicznej firmy Microsoft. Informacje zawarte w niniejszym dokumencie są dostarczane jako odpowiedź na pojawiające się problemy. W wyniku przyspieszonego udostępnienia, materiały te mogą zawierać błędy typograficzne i mogą być zmieniane w dowolnym czasie bez uprzedzenia. Zobacz Warunki użytkowaniadla innych względów.

Potrzebujesz dalszej pomocy?

Chcesz uzyskać więcej opcji?

Poznaj korzyści z subskrypcji, przeglądaj kursy szkoleniowe, dowiedz się, jak zabezpieczyć urządzenie i nie tylko.

Społeczności pomagają zadawać i odpowiadać na pytania, przekazywać opinie i słuchać ekspertów z bogatą wiedzą.

Czy te informacje były pomocne?

Jaka jest jakość języka?
Co wpłynęło na Twoje wrażenia?
Jeśli naciśniesz pozycję „Wyślij”, Twoja opinia zostanie użyta do ulepszania produktów i usług firmy Microsoft. Twój administrator IT będzie mógł gromadzić te dane. Oświadczenie o ochronie prywatności.

Dziękujemy za opinię!

×