COMO FAZER: Criar uma Sink de Caixa Postal "Coletar Tudo" para o Exchange 2000

Este artigo foi publicado anteriormente em BR324021
Sumário
Este artigo descreve como criar um evento sink para capturar todas as mensagens de correio eletrônico que são enviadas para um domínio em particular, e então direcioná-los para uma única caixa postal.

NOTA : O evento sink de exemplo descrito neste artigo redireciona todas as mensagens de correio eletrônico que são enviadas para um domínio. Para obter informações sobre como criar eventos sink mais complexos, veja o Microsoft Exchange 2000 Software Development Kit (SDK).

voltar para o topo

Criar os Arquivos de Script

Crie os seguintes cinco arquivos de scripts, e então armazene estes numa pasta no computador do Exchange 2000 Server.

A Microsoft fornece exemplos de programação somente para ilustração, sem garantia expressa ou implícita, mas não limitado, às garantias implícitas de comercialização e/ou para um propósito particular. Esse artigo assume que você está familiarizado com as linguagens de programação que estão sendo demonstradas e as ferramentas utilizadas para criar e procedimentos de depuração. Os engenheiros de suporte da Microsoft podem ajudá-lo explicando a funcionalidade de um procedimento particular, mas eles não modificarão estes exemplos para prover funcionalidades adicionais ou construir procedimentos para satisfazer suas necessidades específicas. Se a sua experiência com programação é limitada, entre em contato com um Parceiro Certificado Microsoft para informações sobre como obter suporte técnico pago. Para obter informações adicionais sobre Parceiros Certificados da Microsoft, veja o seguinte site da Web da Microsoft:Para obter informações adicionais sobre as opções de suporte que estão disponíveis e sobre como contatar a Microsoft, visite o seguinte site Web da Microsoft:voltar para o topo

Catchall.cmd

O arquivo Catchall.cmd chama o script SMTPReg.vbs e registra o evento sink Catchall. Para criar este arquivo .cmd, siga esses passos:
  1. Digite ou cole o seguinte código num editor de texto, como o Bloco de Notas:
    cscript smtpreg.vbs /add 1 onarrival SMTPScriptingCatchAll CDO.SS_SMTPOnArrivalSink "mail from=*"cscript smtpreg.vbs /setprop 1 onarrival SMTPScriptingCatchAll Sink ScriptName d:\mec\catchall\catchall.vbscscript smtpreg.vbs /delprop 1 onarrival SMTPScriptingCatchAll Source Rule
    NOTA : Modifique o caminho para o arquivo Catchall.vbs para refletir o local da pasta dos arquivos Catchall.
  2. Salve o arquivo como Catchall.cmd .
voltar para o topo

Enum.cmd

Execute Enum.cmd para listar os eventos sinks que estão registrados no servidor. Para criar este arquivo, siga esses passos:
  1. Digite ou cole o seguinte código num editor de texto, como o Bloco de Notas:
    cscript smtpreg.vbs /enum |more
  2. Salve o arquivo como Enum.cmd .
voltar para o topo

Catchall.vbs

O script Catchall.vbs é usado para criar a conta Catchall. Personalize este arquivo para o seu ambiente do Exchange 2000 Server.
  1. Digite ou cole o seguinte código num editor de texto, como o Bloco de Notas: Salve este arquivo como Catchall.vbs .
    <SCRIPT LANGUAGE="VBSCRIPT">'' For information about this namespace, see '   http://msdn.microsoft.com/library/default.asp?url=/library/en-us/cdosys/html/_cdosys_schema_smtpenvelope.asp'Const RECIP_LIST = "http://schemas.microsoft.com/cdo/smtpenvelope/recipientlist"'' For information about the CdoEventStatus enumeration, see '   http://msdn.microsoft.com/library/default.asp?url=/library/en-us/cdosys/html/_cdosys_cdoeventstatus_enum.asp'Const CDO_RUN_NEXT_SINK = 0'' OnArrival sink entry point'Sub ISMTPOnArrival_OnArrival(ByVal Msg, EventStatus)  On Error Resume Next  Dim objFields    Set objFields = Msg.EnvelopeFields  objFields(RECIP_LIST).Value = FixupRecipList(objFields(RECIP_LIST).Value)  objFields.Update    Msg.DataSource.Save ' Commit changes  EventStatus = CDO_RUN_NEXT_SINKEnd Sub''  Change any @example.com recipient(s) to bob@company.com'Function FixupRecipList(strList)  On Error Resume Next  Dim strFixedList  Dim nDomainPart  Dim nNamePart  Dim nNextAddress  strFixedList = strList  While (InStr(LCase(strFixedList),"@example.com"))    nDomainPart = InStr(LCase(strFixedList),"@example.com")    nNamePart = InStrRev(strFixedList,";",nDomainPart)    nNextAddress = InStr(nDomainPart+Len("@example.com;"),strFixedList,"SMTP:")    If (0 = nNamePart) Then      ' @example.com is first name in recipient list      If (0 = nNextAddress) Then        ' @example.com is the last name in the recipient list        strFixedList = "SMTP:bob@company.com;"      Else        ' @example.com is not the last name in the recipient list        strFixedList = "SMTP:bob@company.com;" & Right(strFixedList,Len(strFixedList)-nNextAddress+1)      End If    Else      ' @example.com is not the first name in recipient list      If (0 = nNextAddress) Then        ' @example.com is the last name in the recipient list        strFixedList = Left(strFixedList,nNamePart) & "SMTP:bob@company.com;"      Else        ' @example.com is not the last name in the recipient list        strFixedList = Left(strFixedList,nNamePart) & "SMTP:bob@company.com;" & Right(strFixedList,Len(strFixedList)-nNextAddress+1)      End If    End If  Wend  FixupRecipList = strFixedListEnd Function</SCRIPT>
  2. Edite o arquivo Catchall.vbs para substituir ocorrências de@example.com por @ seudominio.com , onde seudominio.com é o domínio para o qual você quer redirecionar as mensagens de correio eletrônico.
  3. Substitua todas as ocorrências de bob@company.com pelo endereço SMTP da caixa postal para a qual você quer redirecionar todas as mensagens de correio eletrônico para o domínio que você especificou no passo 2.

    NOTA : O endereço de correio eletrônico para o qual você quer redirecionar todo o correio tem que ser de um domínio diferente do domínio que você quer redirecionar as mensagens de correio eletrônico. Por exemplo, se o domínio que você especificar no passo 2 for @ company.com , os endereços de correio eletrônico que você especificar no passo 3 não pode ser bob @ company.com . Se os domínios forem os mesmos, a mensagem irá criar um loop contínuo e será eventualmente retornada para o remetente como não entregável.

    Se o destinatário tem que ter um endereço de correio eletrônico no domínio coletor (o domínio para o qual você quer redirecionar as menssagens), como bob@company.com , adicione um domínio a mais como @ company.local para a política de destinatário para o usuário, e então adicione um endereço SMTP de bob@company.local para o endereço de correio eletrônico do usuário. O endereço de bob@company.local pode então ser usado como o endereço de correio eletrônico a ser especificado no passo 3.
voltar para o topo

SMTPReg.vbs

Criar um script para registrar o evento sink Catchall. Para fazer isto, siga esses passos:
  1. Digite ou cole o seguinte código num editor de texto, como o Bloco de Notas:
    'THIS CODE AND INFORMATION IS PROVIDED "AS IS" WITHOUT 'WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, 'INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES 'OF MERCHANTABILITY AND/OR FITNESS FOR A PARTICULAR 'PURPOSE'------------------------------------------------------------------------------'FILE DESCRIPTION: Script for registering for SMTP Protocol sinks. ''File Name: smtpreg.vbs' '' Copyright (c) Microsoft Corporation 1993-1998. All rights reserved.'------------------------------------------------------------------------------Option Explicit''' the OnArrival event GUIDConst GUIDComCatOnArrival = "{ff3caa23-00b9-11d2-9dfb-00C04FA322BA}"' the SMTP source typeConst GUIDSourceType = "{FB65C4DC-E468-11D1-AA67-00C04FA345F6}"' Const GUIDCat = "{871736c0-fd85-11d0-869a-00c04fd65616}"Const GUIDSources = "{DBC71A31-1F4B-11d0-869D-80C04FD65616}"' the SMTP service display name.  This is used to key which service to' editConst szService = "smtpsvc"' the event manager object.  This is used to communicate with the ' event binding database.Dim EventManagerSet EventManager = WScript.CreateObject("Event.Manager")'' register a new sink with event manager'' iInstance - the instance to work against' szEvent - OnArrival' szDisplayName - the display name for this new sink' szProgID - the progid to call for this event' szRule - the rule to set for this event'public sub RegisterSink(iInstance, szEvent, szDisplayName, szProgID, szRule)	Dim SourceType	Dim szSourceDisplayName	Dim Source	Dim Binding	Dim GUIDComCat	Dim PrioVal	' figure out which event they are trying to register with and set	' the comcat for this event in GUIDComCat	select case LCase(szEvent)		case "onarrival"			GUIDComCat = GUIDComCatOnArrival		case else			WScript.echo "invalid event: " & szEvent			exit sub	end select	' enumerate through each of the registered instances for the SMTP source	' type and look for the display name that matches the instance display	' name	set SourceType = EventManager.SourceTypes(GUIDSourceType)	szSourceDisplayName = szService & " " & iInstance	for each Source in SourceType.Sources		if Source.DisplayName = szSourceDisplayName then			' You have found the instance that you want. Now add a new binding			' with the right event GUID.  by not specifying a GUID to the			' Add method you get server events to create a new ID for this			' event			set Binding = Source.GetBindingManager.Bindings(GUIDComCat).Add("")			' set the binding properties			Binding.DisplayName = szDisplayName			Binding.SinkClass = szProgID			' register a rule with the binding			Binding.SourceProperties.Add "Rule", szRule			' register a priority with the binding			PrioVal = GetNextPrio(Source, GUIDComCat)			If PrioVal < 0 then				WScript.Echo "assigning priority to default value (24575)"				Binding.SourceProperties.Add "Priority", 24575			else					WScript.Echo "assigning priority (" & PrioVal & " of 32767)"				Binding.SourceProperties.Add "Priority", PrioVal			end if			' save the binding			Binding.Save			WScript.Echo "registered " & szDisplayName			exit sub		end if	nextend sub'' iterate through the bindings in a source, find the binding' with the lowest priority, and return the next priority value.' If the next value exceeds the range, return -1.'public function GetNextPrio(oSource, GUIDComCat)	' it's possible that priority values will not be	' numbers, so you add error handling for this case	on error resume next	Dim Bindings	Dim Binding	Dim nLowestPrio	Dim nPrioVal	nLowestPrio = 0	set Bindings = oSource.GetBindingManager.Bindings(GUIDComCat)	' if the bindings collection is empty, then this is the first	' sink. It receives the highest priority (0).	if Bindings.Count = 0 then		GetNextPrio = 0	else		' get the lowest existing priority value		for each Binding in Bindings			nPrioVal = Binding.SourceProperties.Item("Priority")			if CInt(nPrioVal) > nLowestPrio then				if err.number = 13 then					err.clear				else					nLowestPrio = CInt(nPrioVal)				end if			end if		next 		' assign priority values in increments of 10 so priorities		' can be shuffled later without the need to reorder all		' binding priorities.  Valid priority values are 0 - 32767		if nLowestPrio + 10 > 32767 then			GetNextPrio = -1		else			GetNextPrio = nLowestPrio + 10		end if	end ifend function  '' Search for a previously registered sink with the passed in name'' iInstance - the instance to work against' szEvent - OnArrival' szDisplayName - the display name of the event to check' bCheckError - Any errors returnedpublic sub CheckSink(iInstance, szEvent, szDisplayName, bCheckError)	Dim SourceType	Dim GUIDComCat	Dim szSourceDisplayName	Dim Source	Dim Bindings	Dim Binding	bCheckError = FALSE	select case LCase(szEvent)		case "onarrival"			GUIDComCat = GUIDComCatOnArrival		case else			WScript.echo "invalid event: " & szEvent			exit sub	end select	' find the source for this instance	set SourceType = EventManager.SourceTypes(GUIDSourceType)	szSourceDisplayName = szService & " " & iInstance	for each Source in SourceType.Sources		if Source.DisplayName = szSourceDisplayName then			' find the binding by display name.  to do this, enumerate			' all of the bindings and try to match on the display name			set Bindings = Source.GetBindingManager.Bindings(GUIDComCat)			for each Binding in Bindings				if Binding.DisplayName = szDisplayName then					' you have found the binding, now log an error					WScript.Echo "Binding with the name " & szDisplayName & " already exists"					exit sub 				end if			next		end if	next	bCheckError = TRUEend sub'' unregister a previously registered sink'' iInstance - the instance to work against' szEvent - OnArrival' szDisplayName - the display name of the event to remove'public sub UnregisterSink(iInstance, szEvent, szDisplayName)	Dim SourceType	Dim GUIDComCat	Dim szSourceDisplayName	Dim Source	Dim Bindings	Dim Binding	select case LCase(szEvent)		case "onarrival"			GUIDComCat = GUIDComCatOnArrival		case else			WScript.echo "invalid event: " & szEvent			exit sub	end select	' find the source for this instance	set SourceType = EventManager.SourceTypes(GUIDSourceType)	szSourceDisplayName = szService & " " & iInstance	for each Source in SourceType.Sources		if Source.DisplayName = szSourceDisplayName then			' find the binding by display name.  to do this, enumerate			' all of the bindings and try to match on the display name			set Bindings = Source.GetBindingManager.Bindings(GUIDComCat)			for each Binding in Bindings				if Binding.DisplayName = szDisplayName then					' you have found the binding, now remove it					Bindings.Remove(Binding.ID)					WScript.Echo "removed " & szDisplayName & " " & Binding.ID				end if			next		end if	nextend sub'' add or remove a property from the source or sink propertybag for an event'' iInstance - the SMTP instance to edit' szEvent - the event type (OnArrival)' szDisplayName - the display name of the event' szPropertyBag - the property bag to edit ("source" or "sink")' szOperation - "add" or "remove"' szPropertyName - the name to edit in the property bag' szPropertyValue - the value to assign to the name (ignored for remove)'public sub EditProperty(iInstance, szEvent, szDisplayName, szPropertyBag, szOperation, szPropertyName, szPropertyValue)	Dim SourceType	Dim GUIDComCat	Dim szSourceDisplayName	Dim Source	Dim Bindings	Dim Binding	Dim PropertyBag	select case LCase(szEvent)		case "onarrival"			GUIDComCat = GUIDComCatOnArrival		case else			WScript.echo "invalid event: " & szEvent			exit sub	end select	' find the source for this instance	set SourceType = EventManager.SourceTypes(GUIDSourceType)	szSourceDisplayName = szService & " " & iInstance	for each Source in SourceType.Sources		if Source.DisplayName = szSourceDisplayName then			set Bindings = Source.GetBindingManager.Bindings(GUIDComCat)			' find the binding by display name.  to do this, enumerate			' all of the bindings and try to match on the display name			for each Binding in Bindings				if Binding.DisplayName = szDisplayName then					' figure out which set of properties you want to modify					' based on the szPropertyBag parameter					select case LCase(szPropertyBag)						case "source"							set PropertyBag = Binding.SourceProperties						case "sink"							set PropertyBag = Binding.SinkProperties						case else							WScript.echo "invalid propertybag: " & szPropertyBag							exit sub					end select					' figure out what operation you want to perform					select case LCase(szOperation)						case "remove"							' they want to remove szPropertyName from the							' property bag							PropertyBag.Remove szPropertyName							WScript.echo "removed property " & szPropertyName						case "add"							' add szPropertyName to the property bag and 							' set its value to szValue.  if this value							' already exists then this will change  the value							' it to szValue.							PropertyBag.Add szPropertyName, szPropertyValue							WScript.echo "setproperty " & szPropertyName & " to " & szPropertyValue						case else							WScript.echo "invalid operation: " & szOperation							exit sub					end select					' save the binding					Binding.Save				end if			next		end if	nextend sub'' this helper function takes an IEventSource object and a event category' and dumps all of the bindings for this category under the source'' Source - the IEventSource object to display the bindings for' GUIDComCat - the event category to display the bindings for'public sub DisplaySinksHelper(Source, GUIDComCat)	Dim Binding	Dim propval	' walk each of the registered bindings for this component category	for each Binding in Source.GetBindingManager.Bindings(GUIDComCat)		' display the binding properties		WScript.echo "    Binding " & Binding.ID & " {"		WScript.echo "      DisplayName = " & Binding.DisplayName		WScript.echo "      SinkClass = " & Binding.SinkClass		if Binding.Enabled = True then			WScript.echo "      Status = Enabled"		else			WScript.echo "      Status = Disabled"		end if		' walk each of the source properties and display them		WScript.echo "      SourceProperties {"		for each propval in Binding.SourceProperties			WScript.echo "        " & propval & " = " & Binding.SourceProperties.Item(propval)		next		WScript.echo "      }"		' walk each of the sink properties and display them		WScript.echo "      SinkProperties {"		for each Propval in Binding.SinkProperties			WScript.echo "        " & propval & " = " & Binding.SinkProperties.Item(Propval)		next		WScript.echo "      }"		WScript.echo "    }"	nextend sub'' dumps all of the information in the binding database related to SMTP'public sub DisplaySinks	Dim SourceType	Dim Source	' look for each of the sources registered for the SMTP source type	set SourceType = EventManager.SourceTypes(GUIDSourceType)	for each Source in SourceType.Sources		' display the source properties		WScript.echo "Source " & Source.ID & " {"		WScript.echo "  DisplayName = " & Source.DisplayName		' display all of the sinks registered for the OnArrival event		WScript.echo "  OnArrival Sinks {"		call DisplaySinksHelper(Source, GUIDComCatOnArrival)		WScript.echo "  }"	nextend sub'' enable/disable a registered sink'' iInstance - the instance to work against' szEvent - OnArrival' szDisplayName - the display name for this new sink'public sub SetSinkEnabled(iInstance, szEvent, szDisplayName, szEnable)	Dim SourceType	Dim GUIDComCat	Dim szSourceDisplayName	Dim Source	Dim Bindings	Dim Binding	select case LCase(szEvent)		case "onarrival"			GUIDComCat = GUIDComCatOnArrival		case else			WScript.echo "invalid event: " + szEvent			exit sub	end select	' find the source for this instance	set SourceType = EventManager.SourceTypes(GUIDSourceType)	szSourceDisplayName = szService + " " + iInstance	for each Source in SourceType.Sources		if Source.DisplayName = szSourceDisplayName then			' find the binding by display name.  to do this, enumerate			' all of the bindings and try to match on the display name			set Bindings = Source.GetBindingManager.Bindings(GUIDComCat)			for each Binding in Bindings				if Binding.DisplayName = szDisplayName then					' You have found the binding, now enable/disable it					' You do not need "case else' because szEnable's value					' is set internally, not by users					select case LCase(szEnable)						case "true"							Binding.Enabled = True							Binding.Save							WScript.Echo "enabled " + szDisplayName + " " + Binding.ID						case "false"							Binding.Enabled = False							Binding.Save							WScript.Echo "disabled " + szDisplayName + " " + Binding.ID						end select				end if			next		end if	nextend sub' ' display usage information for this script'public sub DisplayUsage	WScript.echo "usage: cscript smtpreg.vbs <command> <arguments>"	WScript.echo "  commands:"	WScript.echo "    /add <Instance> <Event> <DisplayName> <SinkClass> <Rule>"	WScript.echo "    /remove <Instance> <Event> <DisplayName>"	WScript.echo "    /setprop <Instance> <Event> <DisplayName> <PropertyBag> <PropertyName> "	WScript.echo "             <PropertyValue>"	WScript.echo "    /delprop <Instance> <Event> <DisplayName> <PropertyBag> <PropertyName>"	WScript.echo "    /enable <Instance> <Event> <DisplayName>"	WScript.echo "    /disable <Instance> <Event> <DisplayName>"	WScript.echo "    /enum"	WScript.echo "  arguments:"	WScript.echo "    <Instance> is the SMTP instance to work against"	WScript.echo "    <Event> can be OnArrival"	WScript.echo "    <DisplayName> is the display name of the event to edit"	WScript.echo "    <SinkClass> is the sink class for the event"	WScript.echo "    <Rule> is the rule to use for the event"		WScript.echo "    <PropertyBag> can be Source or Sink"	WScript.echo "    <PropertyName> is the name of the property to edit"	WScript.echo "    <PropertyValue> is the value to assign to the property"end subDim iInstanceDim szEventDim szDisplayNameDim szSinkClassDim szRuleDim szPropertyBagDim szPropertyNameDim szPropertyValuedim bCheck'' this is the main body of our script.  it reads the command line parameters' specified and then calls the appropriate function to perform the operation'if WScript.Arguments.Count = 0 then	call DisplayUsageelse 	Select Case LCase(WScript.Arguments(0))		Case "/add"			if not WScript.Arguments.Count = 6 then				call DisplayUsage			else				iInstance = WScript.Arguments(1)				szEvent = WScript.Arguments(2)				szDisplayName = WScript.Arguments(3)				szSinkClass = WScript.Arguments(4)				szRule = WScript.Arguments(5)				call CheckSink(iInstance, szEvent, szDisplayName, bCheck)				if bCheck = TRUE then					call RegisterSink(iInstance, szEvent, szDisplayName, szSinkClass, szRule)				End if			end if		Case "/remove"			if not WScript.Arguments.Count = 4 then				call DisplayUsage			else				iInstance = WScript.Arguments(1)				szEvent = WScript.Arguments(2)				szDisplayName = WScript.Arguments(3)				call UnregisterSink(iInstance, szEvent, szDisplayName)			end if			Case "/setprop"			if not WScript.Arguments.Count = 7 then				call DisplayUsage			else				iInstance = WScript.Arguments(1)				szEvent = WScript.Arguments(2)				szDisplayName = WScript.Arguments(3)				szPropertyBag = WScript.Arguments(4)				szPropertyName = WScript.Arguments(5)				szPropertyValue = WScript.Arguments(6)				call EditProperty(iInstance, szEvent, szDisplayName, szPropertyBag, "add", szPropertyName, szPropertyValue)			end if		Case "/delprop"			if not WScript.Arguments.Count = 6 then				call DisplayUsage			else				iInstance = WScript.Arguments(1)				szEvent = WScript.Arguments(2)				szDisplayName = WScript.Arguments(3)				szPropertyBag = WScript.Arguments(4)				szPropertyName = WScript.Arguments(5)				call EditProperty(iInstance, szEvent, szDisplayName, szPropertyBag, "remove", szPropertyName, "")					end if		Case "/enable"			if not WScript.Arguments.Count = 4 then				call DisplayUsage			else				iInstance = WScript.Arguments(1)				szEvent = WScript.Arguments(2)				szDisplayName = WScript.Arguments(3)				call SetSinkEnabled(iInstance, szEvent, szDisplayName, "True")			end if		Case "/disable"			if not WScript.Arguments.Count = 4 then				call DisplayUsage			else				iInstance = WScript.Arguments(1)				szEvent = WScript.Arguments(2)				szDisplayName = WScript.Arguments(3)				call SetSinkEnabled(iInstance, szEvent, szDisplayName, "False")			end if		Case "/enum"			if not WScript.Arguments.Count = 1 then				call DisplayUsage			else				call DisplaySinks			end if		Case Else			call DisplayUsage	End Selectend if
  2. Salve o arquivo como Smtpreg.vbs .
voltar para o topo

Removecatchall.cmd

Criar um arquivo .cmd para remover (desinstalar) o evento sink Catchall se você pensa que pode querer remover este posteriormente. Para fazer isto, siga esses passos:
  1. Digite ou cole o seguinte código num editor de texto, como o Bloco de Notas:
    cscript smtpreg.vbs /remove 1 onarrival SMTPScriptingCatchAll
  2. Salve o arquivo como Removecatchall.cmd .

    NOTA : Se você quiser remover o evento sink Catchall, você pode fazer isso executando Removecatchall.cmd a partir de um prompt de comando.
voltar para o topo

Registre o Evento Sink Catchall

  1. Verifique se você criou uma conta de correio eletrônico com a qual coletar as mensagens de correio eletrônico redirecionadas.
  2. Execute Catchall.cmd a partir do diretório que contém os arquivos .vbs que você criou.
  3. Reinicie o serviço SMTP no Exchange System Manager.
  4. Teste o evento sink enviando uma mensagem para um endereço de correio eletrônico no domínio catchall que você especificou no passo 2 da seção "Catchall.vbs" deste artigo. A mensagem é entregue ao destinatário pelo endereço que você especificou no passo 3 da mesma seção do arquivo.
voltar para o topo
Referências
Para obter informações adicionais sobre como obter o Exchange 2000 SDK, visite o seguinte site Web da Microsoft: voltar para o topo
Propriedades

ID do Artigo: 324021 - Última Revisão: 05/13/2007 05:09:47 - Revisão: 1.2

Microsoft Exchange 2000 Server Standard Edition

  • kbhowto kbhowtomaster KB324021
Comentários