Because security is much more limited on Windows 95, Windows 98, and Windows Me, the interface and options may differ on Windows 95, Windows 98, and Windows Me systems. This article is written for those running DCOM Config on Windows NT or Windows 2000 systems.
- Default Properties.
- Default Security.
Applications TabThe Applications tab shows each of the items registered under the following registry key:
For each item listed in the Applications tab, properties for each application can be viewed by selecting an item and choosing the "Properties" button or by double-clicking an application name.
Default Properties TabEach of the values displayed under the Default Properties tab may be found under the following key in the registry:
NOTE: You must reboot the system in order for a change in this setting to take effect.
The second part of the Default Properties tab is the Default Distributed COM Communication Properties, which has of two levels:
- Default Authentication Level.
- Default Impersonation Level.
Default Authentication Level (Packet Level)Authentication Levels are as follows:
NOTE: "Connect" and "Call" are not used for connectionless protocols. Windows NT and Windows 2000 use a connectionless protocol, UDP, by default. However, Windows 95 uses TCP, which is connection-based. Windows 95 machines can only accept calls on the "None" or "Connect" levels.
None No authentication.
Connect Authentication occurs when a connection
is made to the server. Connectionless
protocols do not use this.
Call The authentication occurs when a RPC call
is accepted by the server. Connectionless
protocols do not use this.
Packet Authenticates the data on a per-packet
basis. All data is authenticated.
Packet Integrity This authenticates that the data has come
from the client, and checks that the
data has not been modified.
Packet Privacy In addition to the checks made by the other
authentication techniques, this encrypts
Default May vary depending upon operating system.
Default Impersonation LevelIf no security is set at the object level, the server uses the security setting specified here as the default. The possible values are:
The last item on the Default Properties tab is the "Provide additional security for reference tracking" check box, which tells the server to track connected client applications by keeping an additional reference count. Checking this box uses more memory and may cause COM to slow down, but it ensures that a client application cannot kill a server process by artificially forcing a reference count to zero.
Anonymous The client is anonymous. This setting is
not currently supported by DCOM.
Identify The server can impersonate the client to
check permissions in the ACL (Access
Control List) but cannot access system
Impersonate The server can impersonate the client and
access system objects on the client's
Delegate In addition to the Impersonate level, this
level can impersonate the client on calls
to other servers. This is not supported in
the current release of DCOM.
Default Security TabThere are three options under the Default Security tab. Each of the values stored here can be found in the Windows registry at the following location:
- Default Access Permission: This value determines the users and groups that can access an object when no other access permissions are provided. For information on how to give individual access permissions to specific DCOM objects, see the "Application Properties" section later in this document. By default, access is provided to the "System" and "Interactive" groups.
- Default Launch Permission: This value determines the users and groups that can launch an object when no other access permissions are provided. For more information on how to give individual launch permissions to specific DCOM objects, see the section "Application Properties" later in this document.
- Default Configuration Permission: This value determines the users and groups that may read or modify configuration information for DCOM applications. This also includes which users and groups will have permission to install new DCOM servers.
System GroupsThere are several group accounts you will find when you configure users and groups. The following list is a summary of which user belongs to each group:
The list above includes the group accounts that are intrinsic to Windows NT and Windows 2000 systems. Your particular network may include more groups from which you may choose. In order to determine the membership of each custom group account, you must contact your network administrator.
Interactive Includes all users who log on to a Windows NT or
Windows 2000 system locally (at the console). It
does not include users who connect to Windows NT
or Windows 2000 resources across a network or are
started as a server.
Network Includes all users who connect to Windows NT or
Windows 2000 resources across a network. It does
not include those who connect through an
Creator/Owner The Creator/Owner group is created for each
sharable resource in the Windows NT system. Its
membership is the set of users who either create
resource s(such as a file) and those who take
ownership of them.
Everyone All users accessing the system, whether locally,
remotely, or across the network.
System The local operating system.
Application PropertiesYou can specify custom settings for individual DCOM applications by choosing the Properties button on the "Applications" tab in DCOM Config. The following section describes each tab (General, Location, Security, Identity) and setting found within Application Properties.
GeneralThe General tab provides general information about the application, displaying the Application name, type (local server or remote server), and location (local path or remote computer). These settings are not modifiable through the DCOM Config interface.
The General Table retrieves all of its information from subkeys of the following registry key:
LocationThis tab is used to determine where DCOM will execute the application. There are three possible choices:
- Run application on the computer where the data is located: if selected, DCOM will execute the application where the data is located. This is useful only if the application provides a data file for the server application.
- Run application on this computer: indicates that the DCOM application should run on the local machine.
- Run application on the following computer: allows you to specify a computer on which to execute. (This feature is currently unavailable on Windows NT 4.0 systems, Windows NT 4.0 does not support full security delegation.)
SecurityOn the Security tab, you can customize settings for the following individual application permissions:
- Access Permissions.
- Launch Permissions.
- Configuration Permissions.
IdentityThis tab is used to determine which account you want to use to run the application. There are four choices by which the system determines which account your DCOM object will run under:
- The Interactive User: the application will run using the security context of the user currently logged onto the computer. If this option is selected and the user is not logged on, then the application will not start.
- The Launching User: the application will run using the security context of the user who started the application. The launching user and the interactive user may be the same.
- This User: you may specify the user whose security context will be used to run the application.
- The System Account: this is available only for Windows NT and Windows 2000 services that use DCOM.
ID do Artigo: 176799 - Última Revisão: 09/02/2006 - Revisão: 1