When a second process attempts to open the file, the original owner will be asked to Break Oplock or Break to Level II Oplock. At that point, the redirector must invalidate cached data, flush writes and locks, and release the oplock, or close the file.
Opportunistic Locking level II, provides a method for granting read access to a file by more than one workstation, and these workstations can cache read data locally (read-ahead). As long as no station writes to the file, multiple stations can have the file open with level II oplock.
- Station 1 opens the file, requesting oplock.
- Since no other station has the file open, the server grants station 1 exclusive oplock.
- Station 2 opens the file, requesting oplock.
- Since station 1 has not yet written to the file, the server asks station 1 to Break to Level II Oplock.
- Station 1 complies by flushing locally buffered lock information to the server.
- Station 1 informs the server that it has Broken to Level II Oplock (alternatively, station 1 could have closed the file).
- The server responds to station 2's open request, granting it level II oplock. Other stations can likewise open the file and obtain level II oplock.
- Station 2 (or any station that has the file open) sends a write request SMB. The server returns the write response.
- The server asks all stations that have the file open to Break to None, meaning no station holds any oplock on the file. Because the workstations can have no cached writes or locks at this point, they need not respond to the break-to-none advisory; all they need do is invalidate locally cashed read-ahead data.
WARNING: Using Registry Editor incorrectly can cause serious, system-wide problems that may require you to reinstall Windows NT to correct them. Microsoft cannot guarantee that any problems resulting from the use of Registry Editor can be solved. Use this tool at your own risk.
Workstation Service Entries
Indicates whether the redirector should use opportunistic-locking (oplock) performance enhancement. This parameter should be disabled only to isolate problems.
UseOpportunisticLocking REG_DWORD 0 or 1
Default: 1 (true)
Server Service Entries
Specifies whether the server allows clients to use oplocks on files. Oplocks are a significant performance enhancement, but have the potential to cause lost cached data on some networks, particularly wide-area networks.
EnableOplocks REG_DWORD 0 or 1
Default: 1 (true)
Specifies the minimum link throughput allowed by the server before it disables raw and opportunistic locks for this connection.
MinLinkThroughput REG_DWORD 0 to infinite bytes per second
Specifies the maximum time allowed for a link delay. If delays exceed this number, the server disables raw I/O and opportunistic locking for this connection.
MaxLinkDelay REG_DWORD 0 to 100,000 seconds
Specifies the time that the server waits for a client to respond to an oplock break request. Smaller values can allow detection of crashed clients more quickly but can potentially cause loss of cached data.
OplockBreakWait REG_DWORD 10 to 180 seconds
Номер статьи: 129202 — последний просмотр: 4 дек. 2003 г. — редакция: 1