How to create a "catchall" mailbox sink for Exchange Server

Summary

This article describes how to create an event sink to capture all e-mail messages that are sent to a particular domain, and then direct them to a single mailbox.

Note The sample event sink described in this article redirects all e-mail messages that are sent to a domain. For information about how to create more complex event sinks, see the Exchange Software Development Kit (SDK).

Create the script files

Create the following five scripts, and then store them in a folder on the Exchange computer.

Microsoft provides programming examples for illustration only, without warranty either expressed or implied. This includes, but is not limited to, the implied warranties of merchantability or fitness for a particular purpose. This article assumes that you are familiar with the programming language that is being demonstrated and with the tools that are used to create and to debug procedures. Microsoft support engineers can help explain the functionality of a particular procedure, but they will not modify these examples to provide added functionality or construct procedures to meet your specific requirements.

Catchall.cmd

The Catchall.cmd file calls the SMTPReg.vbs script and registers the Catchall event sink. To create this .cmd file, follow these steps:
  1. Type or paste the following code into a text editor, such as Notepad:
    cscript smtpreg.vbs /add 1 onarrival SMTPScriptingCatchAll CDO.SS_SMTPOnArrivalSink "mail from=*"

    cscript smtpreg.vbs /setprop 1 onarrival SMTPScriptingCatchAll Sink ScriptName d:\mec\catchall\catchall.vbs

    cscript smtpreg.vbs /delprop 1 onarrival SMTPScriptingCatchAll Source Rule
    Note Modify the path to the Catchall.vbs file to reflect the folder location of the Catchall files.
  2. Save the file as
    Catchall.cmd.

Enum.cmd

Run Enum.cmd to list event sinks that are registered on the server. To create this file, follow these steps:
  1. Type or paste the following code into a text editor, such as Notepad:
    cscript smtpreg.vbs /enum |more
  2. Save the file as
    Enum.cmd.

Catchall.vbs

The Catchall.vbs script is used to create the Catchall account. Customize this file for your Exchange Server environment.
  1. Type or paste the following code into a text editor, such as Notepad. Save this file as Catchall.vbs.
    <SCRIPT LANGUAGE="VBSCRIPT">
    '
    ' For information about this namespace, see
    ' http://msdn.microsoft.com/library/default.asp?url=/library/en-us/cdosys/html/_cdosys_schema_smtpenvelope.asp
    '
    Const RECIP_LIST = "http://schemas.microsoft.com/cdo/smtpenvelope/recipientlist"
    '
    ' For information about the CdoEventStatus enumeration, see
    ' http://msdn.microsoft.com/library/default.asp?url=/library/en-us/cdosys/html/_cdosys_cdoeventstatus_enum.asp
    '
    Const CDO_RUN_NEXT_SINK = 0
    '
    ' OnArrival sink entry point
    '
    Sub ISMTPOnArrival_OnArrival(ByVal Msg, EventStatus)
    On Error Resume Next
    Dim objFields

    Set objFields = Msg.EnvelopeFields
    objFields(RECIP_LIST).Value = FixupRecipList(objFields(RECIP_LIST).Value)
    objFields.Update

    Msg.DataSource.Save ' Commit changes
    EventStatus = CDO_RUN_NEXT_SINK
    End Sub
    '
    ' Change any @example.com recipient(s) to bob@company.com
    '
    Function FixupRecipList(strList)
    On Error Resume Next
    Dim strFixedList
    Dim nDomainPart
    Dim nNamePart
    Dim nNextAddress
    strFixedList = strList
    While (InStr(LCase(strFixedList),"@example.com"))
    nDomainPart = InStr(LCase(strFixedList),"@example.com")
    nNamePart = InStrRev(strFixedList,";",nDomainPart)
    nNextAddress = InStr(nDomainPart+Len("@example.com;"),strFixedList,"SMTP:")
    If (0 = nNamePart) Then
    ' @example.com is first name in recipient list
    If (0 = nNextAddress) Then
    ' @example.com is the last name in the recipient list
    strFixedList = "SMTP:bob@company.com;"
    Else
    ' @example.com is not the last name in the recipient list
    strFixedList = "SMTP:bob@company.com;" & Right(strFixedList,Len(strFixedList)-nNextAddress+1)
    End If
    Else
    ' @example.com is not the first name in recipient list
    If (0 = nNextAddress) Then
    ' @example.com is the last name in the recipient list
    strFixedList = Left(strFixedList,nNamePart) & "SMTP:bob@company.com;"
    Else
    ' @example.com is not the last name in the recipient list
    strFixedList = Left(strFixedList,nNamePart) & "SMTP:bob@company.com;" & Right(strFixedList,Len(strFixedList)-nNextAddress+1)
    End If
    End If
    Wend
    FixupRecipList = strFixedList
    End Function

    </SCRIPT>
  2. Edit the Catchall.vbs file to replace occurrences of
    @example.com with
    @yourdomain.com, where
    yourdomain.com is the domain from which you want to redirect the e-mail messages.
  3. Replace all occurrences of bob@company.comwith the SMTP address of the mailbox to which you want to redirect all e-mail messages for the domain that you specified in step 2.

    Note The e-mail address to which you want to redirect all mail must be from a different domain than the domain from which you want to redirect the e-mail messages. For example, if the domain that you specify in step 2 is @company.com, the e-mail address that you specify in step 3 cannot be
    bob@company.com. If the domains are the same, the message will continuously loop and will eventually be returned to the sender as undeliverable.

    If the recipient must have an e-mail address in the catchall domain (the domain from which you want to redirect the e-mail messages), such as
    bob@company.com, add an additional domain such as @company.local to the recipient policy for the user, and then add a SMTP address of bob@company.local to the user's e-mail addresses. The address of
    bob@company.local can then be used as the e-mail address to specify in step 3.

SMTPReg.vbs

Create a script to register the Catchall event sink. To do this, follow these steps:
  1. Type or paste the following code into a text editor, such as Notepad:
    'THIS CODE AND INFORMATION IS PROVIDED "AS IS" WITHOUT 
    'WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED,
    'INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES
    'OF MERCHANTABILITY AND/OR FITNESS FOR A PARTICULAR
    'PURPOSE

    '------------------------------------------------------------------------------
    'FILE DESCRIPTION: Script for registering for SMTP Protocol sinks.
    '
    'File Name: smtpreg.vbs
    '
    '
    ' Copyright (c) Microsoft Corporation 1993-1998. All rights reserved.
    '------------------------------------------------------------------------------
    Option Explicit

    '
    '
    ' the OnArrival event GUID
    Const GUIDComCatOnArrival = "{ff3caa23-00b9-11d2-9dfb-00C04FA322BA}"
    ' the SMTP source type
    Const GUIDSourceType = "{FB65C4DC-E468-11D1-AA67-00C04FA345F6}"
    '
    Const GUIDCat = "{871736c0-fd85-11d0-869a-00c04fd65616}"
    Const GUIDSources = "{DBC71A31-1F4B-11d0-869D-80C04FD65616}"

    ' the SMTP service display name. This is used to key which service to
    ' edit
    Const szService = "smtpsvc"

    ' the event manager object. This is used to communicate with the
    ' event binding database.
    Dim EventManager
    Set EventManager = WScript.CreateObject("Event.Manager")

    '
    ' register a new sink with event manager
    '
    ' iInstance - the instance to work against
    ' szEvent - OnArrival
    ' szDisplayName - the display name for this new sink
    ' szProgID - the progid to call for this event
    ' szRule - the rule to set for this event
    '
    public sub RegisterSink(iInstance, szEvent, szDisplayName, szProgID, szRule)
    Dim SourceType
    Dim szSourceDisplayName
    Dim Source
    Dim Binding
    Dim GUIDComCat
    Dim PrioVal

    ' figure out which event they are trying to register with and set
    ' the comcat for this event in GUIDComCat
    select case LCase(szEvent)
    case "onarrival"
    GUIDComCat = GUIDComCatOnArrival
    case else
    WScript.echo "invalid event: " & szEvent
    exit sub
    end select
    ' enumerate through each of the registered instances for the SMTP source
    ' type and look for the display name that matches the instance display
    ' name
    set SourceType = EventManager.SourceTypes(GUIDSourceType)
    szSourceDisplayName = szService & " " & iInstance
    for each Source in SourceType.Sources
    if Source.DisplayName = szSourceDisplayName then
    ' You have found the instance that you want. Now add a new binding
    ' with the right event GUID. by not specifying a GUID to the
    ' Add method you get server events to create a new ID for this
    ' event
    set Binding = Source.GetBindingManager.Bindings(GUIDComCat).Add("")
    ' set the binding properties
    Binding.DisplayName = szDisplayName
    Binding.SinkClass = szProgID
    ' register a rule with the binding
    Binding.SourceProperties.Add "Rule", szRule
    ' register a priority with the binding
    PrioVal = GetNextPrio(Source, GUIDComCat)
    If PrioVal < 0 then
    WScript.Echo "assigning priority to default value (24575)"
    Binding.SourceProperties.Add "Priority", 24575
    else
    WScript.Echo "assigning priority (" & PrioVal & " of 32767)"
    Binding.SourceProperties.Add "Priority", PrioVal
    end if
    ' save the binding
    Binding.Save
    WScript.Echo "registered " & szDisplayName
    exit sub
    end if
    next
    end sub

    '
    ' iterate through the bindings in a source, find the binding
    ' with the lowest priority, and return the next priority value.
    ' If the next value exceeds the range, return -1.
    '
    public function GetNextPrio(oSource, GUIDComCat)
    ' it's possible that priority values will not be
    ' numbers, so you add error handling for this case
    on error resume next

    Dim Bindings
    Dim Binding
    Dim nLowestPrio
    Dim nPrioVal
    nLowestPrio = 0
    set Bindings = oSource.GetBindingManager.Bindings(GUIDComCat)
    ' if the bindings collection is empty, then this is the first
    ' sink. It receives the highest priority (0).
    if Bindings.Count = 0 then
    GetNextPrio = 0
    else
    ' get the lowest existing priority value
    for each Binding in Bindings
    nPrioVal = Binding.SourceProperties.Item("Priority")
    if CInt(nPrioVal) > nLowestPrio then
    if err.number = 13 then
    err.clear
    else
    nLowestPrio = CInt(nPrioVal)
    end if
    end if
    next
    ' assign priority values in increments of 10 so priorities
    ' can be shuffled later without the need to reorder all
    ' binding priorities. Valid priority values are 0 - 32767
    if nLowestPrio + 10 > 32767 then
    GetNextPrio = -1
    else
    GetNextPrio = nLowestPrio + 10
    end if
    end if
    end function

    '
    ' Search for a previously registered sink with the passed in name
    '
    ' iInstance - the instance to work against
    ' szEvent - OnArrival
    ' szDisplayName - the display name of the event to check
    ' bCheckError - Any errors returned
    public sub CheckSink(iInstance, szEvent, szDisplayName, bCheckError)
    Dim SourceType
    Dim GUIDComCat
    Dim szSourceDisplayName
    Dim Source
    Dim Bindings
    Dim Binding

    bCheckError = FALSE
    select case LCase(szEvent)
    case "onarrival"
    GUIDComCat = GUIDComCatOnArrival
    case else
    WScript.echo "invalid event: " & szEvent
    exit sub
    end select

    ' find the source for this instance
    set SourceType = EventManager.SourceTypes(GUIDSourceType)
    szSourceDisplayName = szService & " " & iInstance
    for each Source in SourceType.Sources
    if Source.DisplayName = szSourceDisplayName then
    ' find the binding by display name. to do this, enumerate
    ' all of the bindings and try to match on the display name
    set Bindings = Source.GetBindingManager.Bindings(GUIDComCat)
    for each Binding in Bindings
    if Binding.DisplayName = szDisplayName then
    ' you have found the binding, now log an error
    WScript.Echo "Binding with the name " & szDisplayName & " already exists"
    exit sub
    end if
    next
    end if
    next
    bCheckError = TRUE
    end sub

    '
    ' unregister a previously registered sink
    '
    ' iInstance - the instance to work against
    ' szEvent - OnArrival
    ' szDisplayName - the display name of the event to remove
    '
    public sub UnregisterSink(iInstance, szEvent, szDisplayName)
    Dim SourceType
    Dim GUIDComCat
    Dim szSourceDisplayName
    Dim Source
    Dim Bindings
    Dim Binding

    select case LCase(szEvent)
    case "onarrival"
    GUIDComCat = GUIDComCatOnArrival
    case else
    WScript.echo "invalid event: " & szEvent
    exit sub
    end select

    ' find the source for this instance
    set SourceType = EventManager.SourceTypes(GUIDSourceType)
    szSourceDisplayName = szService & " " & iInstance
    for each Source in SourceType.Sources
    if Source.DisplayName = szSourceDisplayName then
    ' find the binding by display name. to do this, enumerate
    ' all of the bindings and try to match on the display name
    set Bindings = Source.GetBindingManager.Bindings(GUIDComCat)
    for each Binding in Bindings
    if Binding.DisplayName = szDisplayName then
    ' you have found the binding, now remove it
    Bindings.Remove(Binding.ID)
    WScript.Echo "removed " & szDisplayName & " " & Binding.ID
    end if
    next
    end if
    next
    end sub

    '
    ' add or remove a property from the source or sink propertybag for an event
    '
    ' iInstance - the SMTP instance to edit
    ' szEvent - the event type (OnArrival)
    ' szDisplayName - the display name of the event
    ' szPropertyBag - the property bag to edit ("source" or "sink")
    ' szOperation - "add" or "remove"
    ' szPropertyName - the name to edit in the property bag
    ' szPropertyValue - the value to assign to the name (ignored for remove)
    '
    public sub EditProperty(iInstance, szEvent, szDisplayName, szPropertyBag, szOperation, szPropertyName, szPropertyValue)
    Dim SourceType
    Dim GUIDComCat
    Dim szSourceDisplayName
    Dim Source
    Dim Bindings
    Dim Binding
    Dim PropertyBag

    select case LCase(szEvent)
    case "onarrival"
    GUIDComCat = GUIDComCatOnArrival
    case else
    WScript.echo "invalid event: " & szEvent
    exit sub
    end select

    ' find the source for this instance
    set SourceType = EventManager.SourceTypes(GUIDSourceType)
    szSourceDisplayName = szService & " " & iInstance
    for each Source in SourceType.Sources
    if Source.DisplayName = szSourceDisplayName then
    set Bindings = Source.GetBindingManager.Bindings(GUIDComCat)
    ' find the binding by display name. to do this, enumerate
    ' all of the bindings and try to match on the display name
    for each Binding in Bindings
    if Binding.DisplayName = szDisplayName then
    ' figure out which set of properties you want to modify
    ' based on the szPropertyBag parameter
    select case LCase(szPropertyBag)
    case "source"
    set PropertyBag = Binding.SourceProperties
    case "sink"
    set PropertyBag = Binding.SinkProperties
    case else
    WScript.echo "invalid propertybag: " & szPropertyBag
    exit sub
    end select
    ' figure out what operation you want to perform
    select case LCase(szOperation)
    case "remove"
    ' they want to remove szPropertyName from the
    ' property bag
    PropertyBag.Remove szPropertyName
    WScript.echo "removed property " & szPropertyName
    case "add"
    ' add szPropertyName to the property bag and
    ' set its value to szValue. if this value
    ' already exists then this will change the value
    ' it to szValue.
    PropertyBag.Add szPropertyName, szPropertyValue
    WScript.echo "set property " & szPropertyName & " to " & szPropertyValue
    case else
    WScript.echo "invalid operation: " & szOperation
    exit sub
    end select
    ' save the binding
    Binding.Save
    end if
    next
    end if
    next
    end sub

    '
    ' this helper function takes an IEventSource object and a event category
    ' and dumps all of the bindings for this category under the source
    '
    ' Source - the IEventSource object to display the bindings for
    ' GUIDComCat - the event category to display the bindings for
    '
    public sub DisplaySinksHelper(Source, GUIDComCat)
    Dim Binding
    Dim propval
    ' walk each of the registered bindings for this component category
    for each Binding in Source.GetBindingManager.Bindings(GUIDComCat)
    ' display the binding properties
    WScript.echo " Binding " & Binding.ID & " {"
    WScript.echo " DisplayName = " & Binding.DisplayName
    WScript.echo " SinkClass = " & Binding.SinkClass
    if Binding.Enabled = True then
    WScript.echo " Status = Enabled"
    else
    WScript.echo " Status = Disabled"
    end if

    ' walk each of the source properties and display them
    WScript.echo " SourceProperties {"
    for each propval in Binding.SourceProperties
    WScript.echo " " & propval & " = " & Binding.SourceProperties.Item(propval)
    next
    WScript.echo " }"

    ' walk each of the sink properties and display them
    WScript.echo " SinkProperties {"
    for each Propval in Binding.SinkProperties
    WScript.echo " " & propval & " = " & Binding.SinkProperties.Item(Propval)
    next
    WScript.echo " }"
    WScript.echo " }"
    next
    end sub

    '
    ' dumps all of the information in the binding database related to SMTP
    '
    public sub DisplaySinks
    Dim SourceType
    Dim Source

    ' look for each of the sources registered for the SMTP source type
    set SourceType = EventManager.SourceTypes(GUIDSourceType)
    for each Source in SourceType.Sources
    ' display the source properties
    WScript.echo "Source " & Source.ID & " {"
    WScript.echo " DisplayName = " & Source.DisplayName
    ' display all of the sinks registered for the OnArrival event
    WScript.echo " OnArrival Sinks {"
    call DisplaySinksHelper(Source, GUIDComCatOnArrival)
    WScript.echo " }"
    next
    end sub

    '
    ' enable/disable a registered sink
    '
    ' iInstance - the instance to work against
    ' szEvent - OnArrival
    ' szDisplayName - the display name for this new sink
    '
    public sub SetSinkEnabled(iInstance, szEvent, szDisplayName, szEnable)
    Dim SourceType
    Dim GUIDComCat
    Dim szSourceDisplayName
    Dim Source
    Dim Bindings
    Dim Binding

    select case LCase(szEvent)
    case "onarrival"
    GUIDComCat = GUIDComCatOnArrival
    case else
    WScript.echo "invalid event: " + szEvent
    exit sub
    end select

    ' find the source for this instance
    set SourceType = EventManager.SourceTypes(GUIDSourceType)
    szSourceDisplayName = szService + " " + iInstance
    for each Source in SourceType.Sources
    if Source.DisplayName = szSourceDisplayName then
    ' find the binding by display name. to do this, enumerate
    ' all of the bindings and try to match on the display name
    set Bindings = Source.GetBindingManager.Bindings(GUIDComCat)
    for each Binding in Bindings
    if Binding.DisplayName = szDisplayName then
    ' You have found the binding, now enable/disable it
    ' You do not need "case else' because szEnable's value
    ' is set internally, not by users
    select case LCase(szEnable)
    case "true"
    Binding.Enabled = True
    Binding.Save
    WScript.Echo "enabled " + szDisplayName + " " + Binding.ID
    case "false"
    Binding.Enabled = False
    Binding.Save
    WScript.Echo "disabled " + szDisplayName + " " + Binding.ID
    end select
    end if
    next
    end if
    next
    end sub

    '
    ' display usage information for this script
    '
    public sub DisplayUsage
    WScript.echo "usage: cscript smtpreg.vbs <command> <arguments>"
    WScript.echo " commands:"
    WScript.echo " /add <Instance> <Event> <DisplayName> <SinkClass> <Rule>"
    WScript.echo " /remove <Instance> <Event> <DisplayName>"
    WScript.echo " /setprop <Instance> <Event> <DisplayName> <PropertyBag> <PropertyName> "
    WScript.echo " <PropertyValue>"
    WScript.echo " /delprop <Instance> <Event> <DisplayName> <PropertyBag> <PropertyName>"
    WScript.echo " /enable <Instance> <Event> <DisplayName>"
    WScript.echo " /disable <Instance> <Event> <DisplayName>"
    WScript.echo " /enum"
    WScript.echo " arguments:"
    WScript.echo " <Instance> is the SMTP instance to work against"
    WScript.echo " <Event> can be OnArrival"
    WScript.echo " <DisplayName> is the display name of the event to edit"
    WScript.echo " <SinkClass> is the sink class for the event"
    WScript.echo " <Rule> is the rule to use for the event"
    WScript.echo " <PropertyBag> can be Source or Sink"
    WScript.echo " <PropertyName> is the name of the property to edit"
    WScript.echo " <PropertyValue> is the value to assign to the property"
    end sub


    Dim iInstance
    Dim szEvent
    Dim szDisplayName
    Dim szSinkClass
    Dim szRule
    Dim szPropertyBag
    Dim szPropertyName
    Dim szPropertyValue
    dim bCheck

    '
    ' this is the main body of our script. it reads the command line parameters
    ' specified and then calls the appropriate function to perform the operation
    '
    if WScript.Arguments.Count = 0 then
    call DisplayUsage
    else
    Select Case LCase(WScript.Arguments(0))
    Case "/add"
    if not WScript.Arguments.Count = 6 then
    call DisplayUsage
    else
    iInstance = WScript.Arguments(1)
    szEvent = WScript.Arguments(2)
    szDisplayName = WScript.Arguments(3)
    szSinkClass = WScript.Arguments(4)
    szRule = WScript.Arguments(5)
    call CheckSink(iInstance, szEvent, szDisplayName, bCheck)
    if bCheck = TRUE then
    call RegisterSink(iInstance, szEvent, szDisplayName, szSinkClass, szRule)
    End if
    end if
    Case "/remove"
    if not WScript.Arguments.Count = 4 then
    call DisplayUsage
    else
    iInstance = WScript.Arguments(1)
    szEvent = WScript.Arguments(2)
    szDisplayName = WScript.Arguments(3)
    call UnregisterSink(iInstance, szEvent, szDisplayName)
    end if
    Case "/setprop"
    if not WScript.Arguments.Count = 7 then
    call DisplayUsage
    else
    iInstance = WScript.Arguments(1)
    szEvent = WScript.Arguments(2)
    szDisplayName = WScript.Arguments(3)
    szPropertyBag = WScript.Arguments(4)
    szPropertyName = WScript.Arguments(5)
    szPropertyValue = WScript.Arguments(6)
    call EditProperty(iInstance, szEvent, szDisplayName, szPropertyBag, "add", szPropertyName, szPropertyValue)
    end if
    Case "/delprop"
    if not WScript.Arguments.Count = 6 then
    call DisplayUsage
    else
    iInstance = WScript.Arguments(1)
    szEvent = WScript.Arguments(2)
    szDisplayName = WScript.Arguments(3)
    szPropertyBag = WScript.Arguments(4)
    szPropertyName = WScript.Arguments(5)
    call EditProperty(iInstance, szEvent, szDisplayName, szPropertyBag, "remove", szPropertyName, "")
    end if
    Case "/enable"
    if not WScript.Arguments.Count = 4 then
    call DisplayUsage
    else
    iInstance = WScript.Arguments(1)
    szEvent = WScript.Arguments(2)
    szDisplayName = WScript.Arguments(3)
    call SetSinkEnabled(iInstance, szEvent, szDisplayName, "True")
    end if
    Case "/disable"
    if not WScript.Arguments.Count = 4 then
    call DisplayUsage
    else
    iInstance = WScript.Arguments(1)
    szEvent = WScript.Arguments(2)
    szDisplayName = WScript.Arguments(3)
    call SetSinkEnabled(iInstance, szEvent, szDisplayName, "False")
    end if
    Case "/enum"
    if not WScript.Arguments.Count = 1 then
    call DisplayUsage
    else
    call DisplaySinks
    end if
    Case Else
    call DisplayUsage
    End Select
    end if

  2. Save the file as
    Smtpreg.vbs.

Removecatchall.cmd

Create a .cmd file to remove (uninstall) the Catchall event sink if you think that you may want to remove it later. To do this, follow these steps:
  1. Type or paste the following code into a text editor, such as Notepad:
    cscript smtpreg.vbs /remove 1 onarrival SMTPScriptingCatchAll
  2. Save this file as
    Removecatchall.cmd.

    Note If you want to remove the Catchall event sink, you can do so by running Removecatchall.cmd from a command prompt.

Register the catchall event sink

  1. Verify that you have created a valid e-mail account with which to collect the redirected e-mail messages.
  2. Run the Catchall.cmd from the directory that contains the .vbs files that you created.
  3. Restart the SMTP service in the Exchange System Manager.
  4. Test the event sink by sending an e-mail message to an e-mail address in the catchall domain that you specified in step 2 of the "Catchall.vbs" section of this article. The message is delivered to the recipient mailbox with the address that you specified in step 3 of that same article section.

References

For additional information about how to obtain the Exchange 2000 SDK, visit the following Microsoft Web site:
Свойства

Номер статьи: 324021 — последний просмотр: 2 дек. 2007 г. — редакция: 1

Отзывы и предложения