You can use a multihomed Windows NT Server 3.5x system configured as a DHCP server, with multiple network cards and IP routing enabled, instead of a relay agent for subnetting purposes.
When it receives the DHCPDISCOVER message, the DHCP server sends a DHCPOFFER directly to the relay agent identified in the GIADDR field, and the agent relays the message to the DHCP client. The client's IP address is still unknown, thus it has to be a broadcast on the local subnet. Similarly, a DHCPREQUEST message is relayed from client to server and a DHCPACK message is relayed from server to client, according to RFC 1542.
When you have multiple DHCP servers, Microsoft recommends that you place your DHCP servers on different subnets to achieve a degree of fault tolerance, rather than having all the DHCP servers in one subnet. The servers should not have common IP addresses in their scopes (each server should have a unique pool of addresses).
If the DHCP server in the local subnet goes down, requests are relayed to a remote subnet, and the DHCP server there can respond to DHCP requests if it maintains a scope of IP addresses for the requesting subnet. If the remote server has no scope defined for the requesting subnet, it cannot provide IP addresses, even if it has available addresses for other scopes. If each DHCP server has a pool of addresses for each subnet, then it can provide IP addresses for remote clients whose DHCP server is down.
ID článku: 120932 – Posledná kontrola: 19. 2. 2007 – Revízia: 1