Momentálne ste offline a čaká sa, kým sa znova pripojíte na internet

XADM: Exchange 2000 Server Eseutil prepínače príkazového riadka

DÔLEŽITÉ: Tento článok bol preložený pomocou softvéru na strojový preklad od spoločnosti Microsoft, nie prekladateľom. Spoločnosť Microsoft ponúka články preložené prekladateľmi aj strojovo preložené články, vďaka čomu máte možnosť prístupu ku všetkým článkom databázy Knowledge Base vo svojom jazyku. Strojovo preložený článok však nie je vždy perfektný. Môže obsahovať chyby týkajúce sa slovnej zásoby, syntaxe alebo gramatiky, podobne ako cudzinec môže robiť chyby, keď rozpráva vašim jazykom. Spoločnosť Microsoft nenesie zodpovednosť za akékoľvek nepresnosti, chyby alebo škody spôsobené akýmkoľvek nepresným prekladom obsahu alebo jeho použitím zo strany zákazníkov. Spoločnosť Microsoft softvér na strojový preklad pravidelne aktualizuje.

Pokiaľ chcete vidieť anglickú verziu článku, kliknite sem:317014
SUHRN
Exchange 2000 Server zahŕňa nástroj nazývaný Eseutil nahrádza Edbutil a Eseutil pomôcok, ktoré sú súčasťou skôr verzie výmeny.
DALSIE INFORMACIE
Nasledujúci príkaz
C:\Program Files/Exchsrvr/BIN / > ESEUTIL /?
vytvára nasledovné výstupné informácie:
Microsoft(R) Exchange Server(TM) Database Utilities<BR/>Version 6.0<BR/>Copyright (C) Microsoft Corporation 1991-2000.  All Rights Reserved.DESCRIPTION:  Maintenance utilities for Microsoft(R) Exchange Server databases.MODES OF OPERATION:      Defragmentation:  ESEUTIL /d <database name> [options]             Recovery:  ESEUTIL /r [options]            Integrity:  ESEUTIL /g <database name [options]            File Dump:  ESEUTIL /m[mode-modifier] <filename>               Repair:  ESEUTIL /p <database name [options]              Restore:  ESEUTIL /c[mode-modifier] <path name> [options]<<<<<  Press a key for more help  >>>>>D=Defragmentation, R=Recovery, G=Integrity, M=File Dump, P=Repair, C=Restore=>DEFRAGMENTATION/COMPACTION: DESCRIPTION:  Performs off-line compaction of a database.      SYNTAX:  ESEUTIL /d <database name> [options]  PARAMETERS:  <database name> - filename of database to compact    OPTIONS:  zero or more of the following switches, separated by a space:              /b<db>     - make backup copy under the specified name              /t<db>     - set temp. database name default: TEMPDFRG.EDB)              /s<file>   - set streaming file name (default: NONE)               /f<file>   - set temp. streaming file name (default: TEMPDFRG.STM)              /p         - preserve temporary database (i.e., don't instate)              /o         - suppress logo              /i         - do not defragment streaming file      NOTES:  1) If instating is disabled (i.e., /p), the original                  database is preserved uncompacted, and the temporary                 database will contain the defragmented version of the                 database.RECOVERY: DESCRIPTION: Performs recovery, bringing all databases to a consistent state.     SYNTAX:  ESEUTIL /r (3 character logfile base name)[options]    OPTIONS:  zero or more of the following switches, separated by a space:              /l<path>   - location of log files (default: current directory)              /s<path>   - location of system files (e.g., checkpoint file)                           (default: current directory)              /i         - ignore mismatched/missing database attachments              /o         - suppress logoINTEGRITY: DESCRIPTION:  Verifies integrity of a database.      SYNTAX:  ESEUTIL /g <database name> [options]  PARAMETERS:  <database name> - filename of database to verify       OPTIONS:  zero or more of the following switches, separated by a space:              /t<db>   - set temp. database name (default:TEMPINTEG704.EDB)              /s<file> - set streaming file name (default: NONE)              /f<name> - set prefix to user for name of report files                         (default: <I>database</I>.integ.raw)                 /o       - suppress logo      NOTES:  1) The consistency-checker performs no recovery and always                  assumes that the database is in a consistent state,                  returning an error if this is not the case.FILE DUMP: DESCRIPTION:  Generates formatted output of various database file types.      SYNTAX:  ESEUTIL /m<mode-modifier> <filename> [options]  PARAMETERS:  <mode-modifier>  - an optional letter designating the type                                   of file dump to perform.                                   Valid values are:                                  h - dump database header (default)                                  k - dump checkpoint file                                  l - dump log file or set of logs                                  m - dump meta-data                                  s - dump space usage                <filename>       - name of file to dump.  The type of the                                   specified file should match the dump type                                   being requested.                                  (eg. if using /mh, then <filename> must                                   be the name of a database.                OPTIONS:  zero or more of the following switches, separated by a space:              /v         - verbose<BR/>              /s<file>   - set streaming file name (default: NONE)              /t <table> - dump nodes for a certain table                           <dump modes mode only>REPAIR:    DESCRIPTION:  Repairs a corrupted or damaged database.         SYNTAX:  ESEUTIL /p <database name> [options]     PARAMETERS:  <database name> - filename of database to repair        OPTIONS:  zero or more of the following switches, separated by a space:                  /s<file>     - set streaming file name (default: NONE)                  /t<db>       - set temp. database name                                 (default: TEMPREPAIR*.EDB)                  /f<name>     - set prefix to use for name of report files                                 (default: <database>.integ.raw)                  /i           - bypass the database and streaming file mismatch error                  /g           - run integrity check before repairing                  /createstm   - create empty streaming file if the file is missing                  /o           - suppress logo          NOTES:  1) Repair does not run database recovery. If a database                     is in a "Dirty Shutdown" state it is strongly                     recommended that before proceeding with repair,                     recovery is first run to properly complete database                     operations for the previous shutdown.                  2) The /i option ignores the signature mismatch error in                     the check phase if the database and streaming file do                     not match each other. The database and streaming file                     will receive new signatures in the repair phase. Without                     using this option, repair will terminate immediately                     once the database and streaming file mismatch error occurs.                  3) The /g option pauses the utility for user input before                     repair is performed if corruption is detected. This option                     overrides /createstm and /o options.                  4) The /createstm option is irreversible.  Once you                     start the repair process a new streaming file will                     be created.  Any streaming file that existed before                     the repair will no longer work with this database.					
Pre viac informácií a súvisiace články, po kliknutí na nasledovné číslo článku databázy Microsoft Knowledge Base:
259851Dôsledky spustený príkaz eseutil /r /d /p alebo edbutil výmenou
170091 XADM: Umiestnenie nástroja Eseutil
192185 XADM: Ako defragmentovaní pomocou nástroja Eseutil (Eseutil.exe)

Upozornenie: Tento článok bol preložený automaticky.

Vlastnosti

ID článku: 317014 – Posledná kontrola: 11/08/2011 10:18:00 – Revízia: 2.0

  • kbinfo kbmt KB317014 KbMtsk
Pripomienky