XCLN: How to Use RPCPing to Test RPC Communication

คำแถลงการณ์ปฏิเสธความรับผิดชอบเนื้อหา KB ที่เกษียณ

บทความนี้มีเนื้อหาเกี่ยวกับผลิตภัณฑ์ที่ Microsoft ไม่ได้ให้การสนับสนุนอีกต่อไป ดังนั้น บทความนี้จึงเสนอเนื้อหา "อย่างที่เป็น" และจะไม่มีการปรับปรุงเนื้อหาอีกต่อไป


The RPC Ping Utility can be used to confirm the RPC connectivity between the computer running Microsoft Exchange Server and any of the supported Microsoft Exchange Client workstations on the network. This utility can be used to check if the Microsoft Exchange Server services are responding to RPC requests from the client workstations via the network.

More Information

There are two components in the RPC Ping Utility: a server-side component and a client-side component.

The executable file of each component is listed below:

Server Component: Rpings.exe (for the Microsoft Exchange Windows NT

Client Component: Rpingc32.exe (for Microsoft Windows NT and Windows95)
Rpingc16.exe (for Microsoft Windows 3.1x clients)
Rpingdos.exe (for Microsoft DOS clients)


Rpings.exe is the server-side RPC ping utility.

Rpings contains two RPC functions Echo and Stats called by the client-side RPC ping utilities Rpingc16, Rpingc32 or Rpingdos.

Run Rpings without any options to use all available protocol sequences.


Command Line Syntax:

RPINGS [-p Protocol Sequence]

Protocol sequences can be set using these friendly names
-p namedpipes
-p tcpip
-p ipx/spx
-p netbios
-p vines

enter '@q' to exit rpings.


Protocol Sequence - Is the supported transport mechanisms of RPC such as:

namedpipes NCA connection over Named Pipes (ncacn_np)

tcpip NCA connection over TCP/IP (ncacn_ip_tcp) netbios NCA connection over Netbios on Netbeui (ncacn_nb_nb) ipx/spx NCA connection over SPX (ncacn_spx) vines NCA connection over Banyan Vines (ncacn_vns_spp)

Rpingc32.exe, Rpingc16.exe, and Rpingdos.exe

Rpingc32 is the 32-bit version of the client-side of the RPC Ping Utility. Rpingc16 and Rpingdos.exe are the 16-bit versions of the client side. They will connect and bind to the specified destination RPC server and display the status, available protocol sequences with end points and quality of the RPC connection.

Both the Rpingc32.exe and Rpingc16.exe utilities are set up to run in the Windows environment. Rpingdos.exe utility runs in the MS-DOS environment.

Rpingc32.exe and Rpingc16.exe


Exchange Server: The name of the Exchange Server to ping
Protocol Sequence: The following options are available:
Any (default)
Named Pipes
End Point: The following End Points on the Exchange Server are
Rping (default, all)
Store (the Exchange Store)
Admin (the Exchange Admin)

Number of Pings: Continuous
Stop at ___

Mode: Ping Only (character echoed by RPINGS)
End Point Search (enumerates all endpoints available)

Run with Security: verifies that authenticated RPCs work



RPINGDOS [-p Protocol Sequence] -n Network Address [-e End Point] [-c
xxx] [-s]

-p [protocol_sequence] defaults to named pipes
-n [network_address] is required
-e [endpoint] endpoint to find, defaults to rping
-c [xxx] number of pings, defaults to 1.
-s run an endpoint search

Protocol sequences can be set using these friendly names
-p namedpipes
-p tcpip
-p ipx/spx
-p netbios
-p vines

The RPCPING utility and files can be found on the Exchange Server CD in the Support\Rpcping directory.

รหัสบทความ: 167260 - การตรวจสอบครั้งสุดท้าย: 22 มิ.ย. 2014 - ฉบับแก้ไข: 1