How To Build an Office COM Add-in by Using Visual Basic .NET

For a Microsoft Visual C# .NET version of this article, see 302901 .

For a Microsoft Visual Basic 6.0 version of this article, see 238228 .

For a Microsoft Visual C++ 6.0 version of this article, see 230689 .



Microsoft Office 2000 and later support a new, uniform design architecture for building application add-ins to enhance and to control Office applications. These add-ins are called COM add-ins. This step-by-step article discusses Office COM add-ins and describes how to build an Office COM add-in by using Microsoft Visual Basic .NET.

The IDTExensibility2 Interface

A COM add-in is an in-process COM server, or ActiveX dynamic link library (DLL), that implements the IDTExensibility2 interface as described in the Microsoft Add-in Designer type library (Msaddndr.dll). All COM add-ins inherit from this interface and must implement each of its five methods.


The OnConnection event fires whenever the COM add-in is connected. The add-in may be connected on startup, by the end user, or through Automation. If OnConnection returns successfully, the add-in is said to be loaded. If an error message is returned, the host application immediately releases its reference to the add-in, and the object is destroyed.

OnConnection takes the following four parameters:
  • Application - A reference to the host application object.
  • ConnectMode - A constant that specifies how the add-in is connected. The add-in can be connected in the following ways:
    • ext_cm_AfterStartup - The add-in is started by the end user from the COM Add-ins dialog box.
    • ext_cm_CommandLine - The add-in is connected from the command line. Note that this does not apply to building COM add-ins for Office applications.
    • ext_cm_External - The add-in is connected by an external application through Automation. Note that this does not apply to building COM add-ins for Office applications.
    • ext_cm_Startup - The add-in is started by the host at application startup. This behavior is controlled by a setting in the registry.
  • AddInInst - A reference to the COMAddIn object that refers to this add-in in the COMAddIns collection for the host application.
  • Custom - An array of Variant type values that can hold user-defined data.


The OnDisconnection event fires when the COM add-in is disconnected and just before it unloads from memory. The add-in should perform any cleanup of resources in this event and should restore any changes made to the host application.

OnDisconnection takes the following two parameters:
  • RemoveMode - A constant that specifies how the add-in was disconnected. The add-in can be disconnected in the following ways:
    • ext_dm_HostShutdown - The add-in is disconnected when the host application closed.
    • ext_dm_UserClosed - The add-in is disconnected by the end user or an Automation controller.
  • Custom - An array of Variant type values that can hold user-defined data.


The OnAddInsUpdate event fires when the set of registered COM add-ins changes. In other words, whenever a COM add-in is installed or removed from the host application, this event fires.

OnStartupComplete and OnBeginShutdown

Both the OnStartupComplete and the OnBeginShutdown methods are called when the host application has left or is entering a state in which user interaction should be avoided because the application is busy loading or unloading itself from memory. OnStartupComplete is only called if the add-in was connected during startup, and OnBeginShutdown is only called if the host disconnects the add-in during shutdown.

Because the user interface for the host application is fully active when these events fire, they may be the only way to perform certain actions that otherwise would be unavailable from OnConnection and OnDisconnection.

COM Add-in Registration

In addition to normal COM registration, a COM add-in needs to register itself with each Office application in which it runs. To register itself with a particular application, the add-in should create a subkey, using its ProgID as the name for the key, under the following location:
The add-in can provide values at this key location for both a friendly display name and a full description. In addition, the add-in should specify its desired load behavior by using a DWORD value called
LoadBehavior. This value determines how the add-in is loaded by the host application, and is made up of a combination of the following values:
  • 0 = Disconnect - Is not loaded.
  • 1 = Connected - Is loaded.
  • 2 = Bootload - Load on application startup.
  • 8 = DemandLoad - Load only when requested by user.
  • 16 = ConnectFirstTime - Load only once (on next startup).
The typical value specified is 0x03 (Connected | Bootload).

Add-ins that implement IDTExtensibility2 should also specify a DWORD value called CommandLineSafe to indicate whether the add-ins are safe for operations that do not support a user interface. A value of 0x00 indicates False, and a value of 0x01 indicates True.

How to Build a COM Add-in by Using Visual Basic .NET

As mentioned earlier, an Office COM add-in is an in-process COM server that is activated by an Office application through the COM run-time layer. Therefore, developing a COM add-in in Visual Basic .NET requires that the add-in component be implemented in .NET and then exposed to the COM clients (that is, the Office applications) through the COM interop layer.

To create a COM add-in in Visual Basic .NET, follow these steps:
  1. In Visual Basic .NET, create a Class Library project.
  2. Add a reference to the type library that implements IDTExtensibility2. The primary interop assembly for this is already available under the name Extensibility.
  3. Add a reference to the Microsoft Office object library. The primary interop assembly for this is already available under the name Office.
  4. Create a public class in the class library that implements IDTExtensibility2.
  5. After the class library is built, register the library for COM interop. To do this, generate a strong named assembly for this class library and then register it with COM interop. You can use Regasm.exe to register a .NET component for COM interop.
  6. Create registry entries so that Office applications can recognize and load the add-in.
You can choose to complete all of these steps, or you can create a .NET project of type Shared Addin. This starts the Extensibility Wizard, which helps you to create a COM add-in in .NET.

The Extensibility Wizard creates a Visual Basic .NET class library project along with a Connect class that implements the IDTExtensibility2 interface. The skeleton code that implements the empty members of
IDTExtensibility is also generated. This project has references to Extensibility and Office assemblies. The build settings of the project have Register for COM Interop selected. The assembly key (.snk) file is generated and is referenced in the AssemblyKeyfile attribute in Assemblyinfo.vb.

Along with the class library project, the wizard generates a setup project that you can use to deploy the COM add-in on other computers. You may remove this project if desired.

Step-by-Step Example

  1. On the File menu in Microsoft Visual Studio .NET, click New, and then click Project.
  2. In the New Project dialog box, expand Other Projects under Project Types, select Extensibility Projects, and then select the Shared Add-in template.
  3. Type MyCOMAddin as the name of the add-in, and then click OK.
  4. When the Extensibility Wizard appears, follow these steps:
    1. On page 1, select Create an Add-in using Visual Basic, and then click Next.
    2. On page 2, select the following host applications, and then click Next:
      • Microsoft Word
      • Microsoft PowerPoint
      • Microsoft Outlook
      • Microsoft Excel
      • Microsoft Access
    3. On page 3, provide a name and description for the add-in, and then click Next.

      Note The name and description of the add-in appear in the COM Add-in dialog box in the Office application.

    4. On page 4, select all of the available options, and then click Next.
    5. Click Finish.
  5. Add the following member to the Connect class:
    Dim WithEvents MyButton As CommandBarButton 
  6. Implement the code for all the members of IDTExtensibility2 in the Connect class, as follows:
        Public Sub OnBeginShutdown(ByRef custom As System.Array) Implements Extensibility.IDTExtensibility2.OnBeginShutdown
    On Error Resume Next
    ' Notify the user you are shutting down, and delete the button.
    MsgBox("Our custom Add-in is unloading.")
    MyButton = Nothing

    End Sub

    Public Sub OnAddInsUpdate(ByRef custom As System.Array) Implements Extensibility.IDTExtensibility2.OnAddInsUpdate
    End Sub

    Public Sub OnStartupComplete(ByRef custom As System.Array) Implements Extensibility.IDTExtensibility2.OnStartupComplete

    Dim oCommandBars As CommandBars
    Dim oStandardBar As CommandBar

    On Error Resume Next
    ' Set up a custom button on the "Standard" command bar.
    oCommandBars = applicationObject.CommandBars
    If oCommandBars Is Nothing Then
    ' Outlook has the CommandBars collection on the Explorer object.
    oCommandBars = applicationObject.ActiveExplorer.CommandBars
    End If

    oStandardBar = oCommandBars.Item("Standard")
    If oStandardBar Is Nothing Then
    ' Access names its main toolbar Database.

    oStandardBar = oCommandBars.Item("Database")

    End If

    ' In case the button was not deleted, use the exiting one.
    MyButton = oStandardBar.Controls.Item("My Custom Button")
    If MyButton Is Nothing Then

    MyButton = oStandardBar.Controls.Add(1)
    With MyButton
    .Caption = "My Custom Button"
    .Style = MsoButtonStyle.msoButtonCaption

    ' The following items are optional, but recommended.
    ' The Tag property lets you quickly find the control
    ' and helps MSO keep track of it when more than
    ' one application window is visible. The property is required
    ' by some Office applications and should be provided.

    .Tag = "My Custom Button"

    ' The OnAction property is optional but recommended.
    ' It should be set to the ProgID of the add-in, so that if
    ' the add-in is not loaded when a user clicks the button,
    ' MSO loads the add-in automatically and then raises
    ' the Click event for the add-in to handle.

    .OnAction = "!<MyCOMAddin.Connect>"

    .Visible = True
    End With
    End If

    ' Display a simple message to show which application you started in.
    MsgBox("Started in " & applicationObject.Name & ".")

    oStandardBar = Nothing
    oCommandBars = Nothing

    End Sub

    Public Sub OnDisconnection(ByVal RemoveMode As Extensibility.ext_DisconnectMode, ByRef custom As System.Array) Implements Extensibility.IDTExtensibility2.OnDisconnection

    On Error Resume Next
    If RemoveMode <> Extensibility.ext_DisconnectMode.ext_dm_HostShutdown Then _
    Call OnBeginShutdown(custom)

    applicationObject = Nothing

    End Sub

    Public Sub OnConnection(ByVal application As Object, ByVal connectMode As Extensibility.ext_ConnectMode, ByVal addInInst As Object, ByRef custom As System.Array) Implements Extensibility.IDTExtensibility2.OnConnection

    MsgBox("On Connection In MyAddin")
    applicationObject = application
    addInInstance = addInInst

    ' If you aren't in startup, manually call OnStartupComplete.
    If (connectMode <> Extensibility.ext_ConnectMode.ext_cm_Startup) Then _
    Call OnStartupComplete(custom)

    End Sub

    Private Sub MyButton_Click(ByVal Ctrl As Microsoft.Office.Core.CommandBarButton, ByRef CancelDefault As Boolean) Handles MyButton.Click
    MsgBox("Our CommandBar button was pressed!")
    End Sub
  7. Build and test the COM add-in. To do this, follow these steps:
    1. On the Build menu, click Build MyCOMAddin. Note that building the COM add-in registers the .NET class with the COM interop.
    2. Start one of the Office applications that you selected as host applications for your add-in (for example, Microsoft Word or Microsoft Excel).
    3. After the add-in has started, the OnConnection event is fired, and you receive a message box. When you dismiss the message box, the
      OnStartupComplete event fires, and you receive a second message box. Dismiss the message box.
    4. Note that the add-in added a new custom button with the caption "My Custom Button" to the standard toolbar.
    5. Click My Custom Button. The Click event for the button is handled by the add-in and you receive a message box. Dismiss the message box.
    6. Quit the Office application.
    7. When you quit the application, the OnBeginShutDown event fires, and you receive a message box. Dismiss the message box to end the demonstration.


For additional information about writing COM add-ins, click the article number below to view the article in the Microsoft Knowledge Base:
190253 INFO: VB6 Designers Do Not Work in VB5
For more information about developing Web-based solutions for Microsoft Internet Explorer, visit the following Microsoft Web sites: (c) Microsoft Corporation 2001, All Rights Reserved. Contributions by Ranjit R. Sawant, Microsoft Corporation.


รหัสบทความ: 302896 - การตรวจสอบครั้งสุดท้าย: 23 มี.ค. 2009 - ฉบับแก้ไข: 1