- The computer may keep restarting and never start the GUI installation after the text mode Setup is finished.
- The Setup program may stop, and you may receive an error message if the Setup program does not correctly detect the controller.
- If you are booting from the installation floppy disks or CD-ROM disc, you receive the following error message:Setup did not find any hard disk drives installed in your systemIf you are upgrading by using the Winnt32.exe file, or if you are performing a new installation by using the Winnt.exe file, you receive the following Stop error:Stop 0x0000007B Inaccessible_boot_device
Note Mass storage controller drivers can be loaded only from floppy disks by using the F6 key. The F6 key cannot be used to load drivers that are stored on USB flash drives, on USB hard disks, or on other external storage devices.
Use of an OEM driver is limited to installing a driver that is not natively supported or that does not match a driver that is included with Windows. If you use a newer version of an OEM driver, and this new OEM driver has the same name or Plug and Play Identifier as a driver that is included with Windows, the Setup program ignores the new OEM driver and uses the driver that is included with Windows. Therefore, you receive the error message that is quoted in the Summary.
If you press F6 when you are prompted, you receive a screen that requires you to have the appropriate driver on a floppy disk and to insert the disk into the floppy disk drive to load the driver.
Windows XP Setup boot disks are available only by download from Microsoft. The Setup boot disks are available so that you can run the Setup program on computers that do not support a bootable CD-ROM. For additional information about how to obtain and use the Setup boot disks, click the following article number to view the article in the Microsoft Knowledge Base:
Note that if you choose to format the partition in the NTFS file system during setup, you cannot copy the newer OEM driver into the System32\Drivers folder after text-mode setup finishes. This is because the Windows Setup program formats the partition as NTFS before copying files. To work around this limitation, install Windows into a file allocation table (FAT) partition that is less than 2 GB in size or into a FAT32 partition that is less than 32 GB in size. Doing this allows access by using a startup disk from Microsoft Windows 98 or Microsoft Windows Millennium Edition (Me). After Windows is installed, use the following command to convert the FAT or FAT32 partition to NTFS:
รหัสบทความ: 314859 - การตรวจสอบครั้งสุดท้าย: 22 ต.ค. 2008 - ฉบับแก้ไข: 1