Requirements for an LDAPS certificateTo enable LDAPS, you must install a certificate that meets the following requirements:
- The LDAPS certificate is located in the Local Computer's Personal certificate store (programmatically known as the computer's MY certificate store).
- A private key that matches the certificate is present in the Local Computer's store and is correctly associated with the certificate. The private key must not have strong private key protection enabled.
- The Enhanced Key Usage extension includes the Server Authentication (188.8.131.52.184.108.40.206.1) object identifier (also known as OID).
- The Active Directory fully qualified domain name of the domain controller (for example, DC01.DOMAIN.COM) must appear in one of the following places:
- The Common Name (CN) in the Subject field.
- DNS entry in the Subject Alternative Name extension.
- The certificate was issued by a CA that the domain controller and the LDAPS clients trust. Trust is established by configuring the clients and the server to trust the root CA to which the issuing CA chains.
- You must use the Schannel cryptographic service provider (CSP) to generate the key.
Creating the certificate requestAny utility or application that creates a valid PKCS #10 request can be used to form the SSL certificate request. Use Certreq to form the request.
Note The commands that are used in this article rely on the 2003 version of Certreq. In order to use the steps in this article on a Windows 2000 server, copy certreq.exe and certcli.dll from a Windows 2003 server into a temporary directory on the Windows 2000 server.
Certreq.exe requires a text instruction file to generate an appropriate X.509 certificate request for a domain controller. You can create this file by using your preferred ASCII text editor. Save the file as an .inf file to any folder on your hard drive.
To request a Server Authentication certificate that is suitable for LDAPS, follow these steps:
- Create the .inf file. Following is an example .inf file that can be used to create the certificate request. ;----------------- request.inf -----------------Cut and paste the sample file into a new text file named Request.inf. Provide the fully qualified DNS name of the domain controller in the request.
Subject = "CN=<DC fqdn>" ; replace with the FQDN of the DC
KeySpec = 1
KeyLength = 1024
; Can be 1024, 2048, 4096, 8192, or 16384.
; Larger key sizes are more secure, but have
; a greater impact on performance.
Exportable = TRUE
MachineKeySet = TRUE
SMIME = False
PrivateKeyArchive = FALSE
UserProtected = FALSE
UseExistingKeySet = FALSE
ProviderName = "Microsoft RSA SChannel Cryptographic Provider"
ProviderType = 12
RequestType = PKCS10
KeyUsage = 0xa0
OID=220.127.116.11.18.104.22.168.1 ; this is for Server Authentication
Note Some third-party certification authorities may require additional information in the Subject parameter. Such information includes an e-mail address (E), organizational unit (OU), organization (O), locality or city (L), state or province (S), and country or region (C). You can append this information to the Subject name (CN) in the Request.inf file. For example: Subject="Eemail@example.com, CN=<DC fqdn>, OU=Servers, O=Contoso, L=Redmond, S=Washington, C=US."
- Create the request file. To do this, type the following command at the command prompt, and then press ENTER: certreq -new request.inf request.reqA new file called Request.req is created. This is the base64-encoded request file.
- Submit the request to a CA. You can submit the request to a Microsoft CA or to a third-party CA.
- Retrieve the certificate that is issued, and then save the certificate as Certnew.cer in the same folder as the request file. To do this, follow these steps:
- Create a new file called Certnew.cer.
- Open the file in Notepad, paste the encoded certificate into the file, and then save the file.
- Accept the issued certificate. To do this, type the following command at the command prompt, and then press ENTER: certreq -accept certnew.cer
- Verify that the certificate is installed in the computer's Personal store. To do this, follow these steps:
- Start Microsoft Management Console (MMC).
- Add the Certificates snap-in that manages certificates on the local computer.
- Expand Certificates (Local Computer), expand Personal, and then expand Certificates.
- Restart the domain controller.
Verifying an LDAPS connectionAfter a certificate is installed, follow these steps to verify that LDAPS is enabled:
- Start the Active Directory Administration Tool (Ldp.exe).
Note This program is installed in the Windows 2000 Support Tools.
- On the Connection menu, click Connect.
- Type the name of the domain controller to which you want to connect.
- Type 636 as the port number.
- Click OK.
RootDSE information should print in the right pane, indicating a successful connection.
- Start TLS extended request
LDAPS communication occurs over port TCP 636. LDAPS communication to a global catalog server occurs over TCP 3269. When connecting to ports 636 or 3269, SSL/TLS is negotiated before any LDAP traffic is exchanged. Windows 2000 does not support the Start TLS extended-request functionality.
- Multiple SSL certificates
Schannel, the Microsoft SSL provider, selects the first valid certificate that it finds in the local computer store. If there are multiple valid certificates available in the local computer store, Schannel may not select the correct certificate.
- Pre-SP3 SSL certificate caching issue
If an existing LDAPS certificate is replaced with another certificate, either through a renewal process or because the issuing CA has changed, the server must be restarted for Schannel to use the new certificate. The SSL provider in Windows 2000 caches the LDAPS certificate and does not detect the change until the domain controller is restarted. This has been corrected in Service Pack 3 for Windows 2000.
Windows Server 2008 improvementsThe original recommendation in this article was to put certificates in the Local Machine's Personal store. Although this option is supported, you can also put certificates in the NTDS Service's Personal certificate store on Windows Server 2008 and on later versions of Active Directory Domain Services (AD DS). For more information about how to add the certificate to the NTDS service's Personal certificate store, visit the following Microsoft TechNet Web site:
AD DS detects when a new certificate is dropped into its certificate store and then triggers an SSL certificate update without having to restart AD DS or restart the domain controller.
A new rootDse operation that is named renewServerCertificate can be used to manually trigger AD DS to update its SSL certificates without having to restart AD DS or restart the domain controller. This attribute can be updated using adsiedit.msc, or by importing the change in LDAP Directory Interchange Format (LDIF) using ldifde.exe. For more information on using LDIF to update this attribute, visit the following Microsoft MSDN Web site:
All these work for Windows Server 2008 AD DS and for 2008 Active Directory Lightweight Directory Services (AD LDS). For AD LDS, put certificates into the Personal certificate store for the service that corresponds to the AD LDS instance instead of for the NTDS service.
Makale No: 321051 - Son İnceleme: 15 May 2017 - Düzeltme: 2