Office 2000 Kur komut satırı anahtarlarının açıklaması

ÖNEMLİ: Bu makale, bir kişi tarafından çevrilmek yerine, Microsoft makine-çevirisi yazılımı ile çevrilmiştir. Microsoft size hem kişiler tarafından çevrilmiş, hem de makine-çevrisi ile çevrilmiş makaleler sunar. Böylelikle, bilgi bankamızdaki tüm makalelere, kendi dilinizde ulaşmış olursunuz. Bununla birlikte, makine tarafından çevrilmiş makaleler mükemmel değildir. Bir yabancının sizin dilinizde konuşurken yapabileceği hatalar gibi, makale; kelime dağarcığı, söz dizim kuralları veya dil bilgisi açısından yanlışlar içerebilir. Microsoft, içeriğin yanlış çevrimi veya onun müşteri tarafından kullanımından doğan; kusur, hata veya zarardan sorumlu değildir. Microsoft ayrıca makine çevirisi yazılımını sıkça güncellemektedir.

202946
Bu makale arşivlenmiştir. "Olduğu gibi" sunulmaktadır ve bundan sonra güncelleştirilmeyecektir.
Bu makalenin Microsoft Office XP sürümü için bkz: 283686.
Özet
Office Kur programını, bir dizi Kur programı'nasıl çalıştığını denetlemek için kullanabileceğiniz isteğe bağlı bir komut satırı anahtarları kabul eder. Bu makalede, anahtarları listeler ve her anahtar işlevlerini açıklar.
Daha fazla bilgi
Önemli Notlar
  • Anahtarlar büyük/küçük harf duyarlı değildir; örneğin, /A/a aynıdır.
  • Özellikle belirtilenler dışında yalnızca bu anahtarları Microsoft Office 2000'in ilk yüklemesi yaparken kullanabilirsiniz.
  • Birden çok anahtar kullanma, bunları bir boşluk ile ayırın. Örneğin, bir özel bir yükleyici dosyası ve sonuçları bir günlük dosyasına yazmak için aşağıdaki komut satırını kullanın:
       Setup /i data1.msi /l* c:\logfile.txt					
Aşağıdaki tabloda, kurulum anahtarları listeler.
 Switch              Description                  -------------------------------------------------------------------------- /?                  Displays a dialog box of valid Setup switch options. -------------------------------------------------------------------------- /a <msifile>        Setup performs an administrative installation using                      the specified Microsoft Installer (.msi) file to                      create an administrative install point. The .msi file                     must be in the same folder as Setup.exe.                     NOTE: This option cannot be used along with the /i                      switch (discussed later).                     Example: /a data1.msi -------------------------------------------------------------------------- /autorun            This switch is only used in the autorun.inf file. Its                      purpose is to indicate that Setup is being run by                     Windows automatically after you insert the Office disc                      in the CD-ROM drive.                     Caution: Do not modify the Autorun.inf file. The                      information it contains is necessary for the proper                     operation of Setup. -------------------------------------------------------------------------- /chained            Used to chain the Setups of more than one Office 2000                     CD. --------------------------------------------------------------------------				
 -------------------------------------------------------------------------- /g <option>         Language ID. English is ID 1033. See the Office                      Resource Kit for a complete list of language IDs.                     Example: /g 1033 -------------------------------------------------------------------------- /help               Displays a dialog box of valid Setup switch options. -------------------------------------------------------------------------- /i <msifile>        Specifies the name of the .msi file. This option                      cannot be used along with the /a option. The .msi                      file must be in the same folder as Setup.exe.                     Example: /i mso9.msi -------------------------------------------------------------------------- /j<option>          Creates an icon representing an Office program or   <package path>    feature that is configured during Setup to install                      the first time you use it ("Installed on first use").                     Valid options are:                     u: Current user logged on to Windows.                        m: All users using the computer.                     g: Language ID.                     t: Applies transform to advertised package.                                          Note: When using the /j switch with a TRANSFORMS file                      the /t switch should be used to point to a particular                      transforms list. Otherwise with other switches the                      TRANSFORMS property should be used.                      Example: /ju c:\data1.msi                     Example: /ju c:\data1.msi /t install.mst                     Example: /ju c:\data1.msi /g 1033--------------------------------------------------------------------------- /f<options>         Setup repairs the Office installation. The .msi file    <package path>    specified must be .msi file used to install Office                      originally. The .msi file must be in the same folder                      as Setup.exe.                     The Detect and Repair command (Help menu) in Office                     programs performs the same function as using the                      following options, /focums.                     If you run Setup and click Reinstall. Setup performs                     the same function as using the following options,                      /fecum. Valid options are:                     a -Force all files to be reinstalled regardless of                         checksum or version.                     c -Reinstall a file if it is missing or corrupted (the                         stored checksum doesn't match the computed                         checksum value).                     d -Reinstall a file if it is missing or a different                         version is present.                     e -Reinstall a file if it is missing or an equal or                         older version is present.                     m -Rewrite all required local machine registry values.                     o -Reinstall a file if it is missing, or an older                         version is present.                     p -Reinstall a file only if it is missing.                     s -Reinstall all shortcuts overwriting any existing                         shortcut.                     u -Rewrite all required user registry values.                     v -Run from the source package and re-cache the local                         package.                     Example: /focums data1.msi -------------------------------------------------------------------------- /l<option>          Logs switches for Msiexec.exe (the Windows installer)   <logfile>         and specifies the path to the log file. The flags                      indicate which information to log. Valid options are:                     a -Startup of actions.                                 c -Initial UI parameters.                     e -All error messages.                     i -Status messages.                     m -Out of memory.                      o -Disk space errors.				
                     r -Action-specific records.                     p -Terminal properties.                     u -User requests.                     v -Verbose output.                     w -Nonfatal warnings.                     + -Append to existing file.                     * -Log all information except verbose output. You can                         use the v switch along with the asterisk, /l*v.                     ! -Writes each line to the log file. The default                         behavior is to cache 20 lines of log file text                         into memory and then write 20 lines to the log                         file at once. This is done to improve performance.                                            Example: /l* c:\logfile.txt --------------------------------------------------------------------------  /m <.mif file>     Specifies an SMS .mif file.                      The /m switch is available with the enhanced version                     of Setup.exe. It will only appear when you run the                      command, "Setup /?" (without the quotation marks). For                     information about the enhanced version of Setup.exe,                      please see the following article in the Microsoft                      Knowledge Base:                     ARTICLE-ID: Q232501                      TITLE     : OFF2000: Description of the Special Copy                                 of Setup.exe from ORK 				
 -------------------------------------------------------------------------- /nd                Used with the Office Server Extensions Setupse.exe                    only. This does not install the Microsoft Database                    Engine. /noinstmsi         Does not install the Windows Installer. --------------------------------------------------------------------------				
 <PROPERTY>=<value>  Specifies a value for any of the Installer properties                      (see the Office Resource Kit for a complete listing                      of valid properties). If the property value contains                      spaces, enclose the string in quotation marks                      ("<value>"). You can specify more than one property                      and value pair on the command line separated by                      spaces.                     Example: TRANSFORMS="c:\acct dept"                               INSTALLLANGUAGE="German" -------------------------------------------------------------------------- /q<option>          Selects the user interface level. Valid options are:                     n: None - No user interface is displayed.                     b: Basic - Only simple progress indicators and error                         are displayed.                     r:  Reduced - No user information is collected and                          no progress indicators are displayed.                                    f: Full - All indicators with a modal dialog box at                         the end of setup.                     n+: No user interface except for a modal dialog box                          displayed at the end.                     Note: The modal dialog box is not displayed if the                     system restarts.                     b+: Basic user interface with a modal dialog box                          displayed at the end.                     Note: The modal dialog box is not displayed if the                      user cancels the installation.                     Example: /qn -------------------------------------------------------------------------- /settings           Specifies a settings file and path that customizes  <INI file>          setup actions.                     /settings c:\office9.ini -------------------------------------------------------------------------- /t <transform>      Specifies the name of the transform (.mst) file. The                      /i switch is required with the /t switch. When using                      the /j switch with a transforms file, the /t switch                      must be used otherwise the TRANSFORMS property should                      be used.                     Example: /t acct.mst /i off9.msi -------------------------------------------------------------------------- /wait               Wait for the installation to complete before exiting                      the Setup program. -------------------------------------------------------------------------- /x <msifile>        Setup uninstalls Office. The .msi file specified                      must be the same .msi file used to install Office                      originally. The .msi file must be in the same folder                      as Setup.exe.                     Example: /x data1.msi --------------------------------------------------------------------------				
Yol Katıştırılmış boşluklar olan uzun bir dosya adı kullanıyorsanız, lütfen Microsoft Knowledge Base'de aşağıdaki makaleye bakın:
139427Çalıştır komutuyla uzun dosya adlarını kullanma
OFF2000 parametrelerini komut satırı anahtarları

Uyarı: Bu makalenin çevirisi otomatik olarak yapılmıştır

Özellikler

Makale No: 202946 - Son İnceleme: 02/22/2014 12:29:35 - Düzeltme: 2.5

  • Microsoft Office 2000 Premium Edition
  • Microsoft Office 2000 Professional Edition
  • Microsoft Office 2000 Standard Edition
  • Microsoft Office 2000 Small Business Edition
  • Microsoft Office 2000 Developer Edition
  • Microsoft Access 2000 Standard Edition
  • Microsoft Excel 2000 Standard Edition
  • Microsoft FrontPage 2000 Standard Edition
  • Microsoft Outlook 2000
  • Microsoft PowerPoint 2000 Standard Edition
  • Microsoft Word 2000 Standard Edition
  • kbnosurvey kbarchive kbmt kbhowto kbinfo kbsetup KB202946 KbMttr
Geri bildirim