[version]signature="$CHICAGO$"[DefaultInstall]AddReg=PortSample[DefaultUnInstall]; This section included for ease of removing any maps added in.; To uninstall, type the following line:;; rundll.exe setupx.dll,InstallHinfSection DefaultUnInstall 0; <I BRACKET="YES">YOUR_INF_FILE_NAME</I>DelReg=PORT_SAMPLE_DEL_REG[PortSample]; MYMAPNAME should be replaced with a friendly ; descriptive name that is unique.;; This data points to the computer that is running the service. ; 0.0.0.0 represents the computer running the ICS services. This ; can alternatively contain the IP address of one of the ICS client ; computers.HKLM,%ICSACTIVE%,MYMAPNAME,,"0.0.0.0"HKLM,%ICSINSTALLED%\MYMAPNAME; "My Friendly Name" should be replaced with something short and ; descriptive such as the name of the program that needs these ports ; open.HKLM,%ICSINSTALLED%\MYMAPNAME,Name,,"My Friendly Name"; Options is a DWORD value and is currently always set to 00,00,00,00 HKLM,%ICSINSTALLED%\MYMAPNAME,Options,1,00,00,00,00; The next four lines describe the specific ports that need to be open; or mapped. The first port is always 0000, each additional port is ; incremented (the second port to open would be listed as 0001,; the third would be 0002, and so on). This information is strictly ; dependent on what is needed by the program. If you do not know what ; ports your program requires or are unsure, you need to contact the ; manufacturer of the program to get this information.;; The four lines need to be re-created for each port.;; On the second line, valid entries for type are "TCP" or "UDP.";; The third line contains the actual port or port range needed by the ; program.;; The entry below demonstrates a port range. If the program only needs ; a single port, the last part of the line below would read ,Port,,"5678";; Note that you can only use a port range when the translation type is ; NORMAL or BLOCK.;; If Translation is set to anything else, you must list each port ; individually.;; Valid types of translation are NORMAL, BLOCK, CUSEEME, DPLAY, FTP, ; H323, PPTP, and QUAKEHKLM,%ICSINSTALLED%\MYMAPNAME\0000HKLM,%ICSINSTALLED%\MYMAPNAME\0000,Type,,"TCP"HKLM,%ICSINSTALLED%\MYMAPNAME\0000,Port,,"5678-5679"HKLM,%ICSINSTALLED%\MYMAPNAME\0000,Translation,,"NORMAL" [PORT_SAMPLE_DEL_REG]HKLM,%ICSINSTALLED%\MYMAPNAMEHKLM,%ICSACTIVE%,MYMAPNAME[Strings]ICSINSTALLED="System\CurrentControlSet\Services\ICSharing\Mappings\Installed"ICSACTIVE="System\CurrentControlSet\Services\ICSharing\Mappings\Active"
Makale No: 231162 - Son İnceleme: 01/24/2007 15:48:29 - Düzeltme: 1.2