How To Use Printer Device Fonts


The fonts that reside in printers can sometimes be very useful and difficult to use in application program code. This article describes how to determine which printer-resident device fonts are available for use in a Win32 printer device context. The article also describes several problems that can occur when you try to use those printer fonts in application code.

More Information

In most cases, a software developer relies on the operating system to provide the fonts that will be used for its drawing. To do this, you can select an operating system-supplied font through the application programming interface (API) or through the common Choose Font dialog box. However, the application is typically not concerned with the particular font that is used, only that it meets certain requirements and that the user prefers the font. These requirements include:

  • Font must be a certain size.
  • Font must contain characters (otherwise known as glyphs).
  • Font must have a certain style.
Typically, when the application prints the document, the font (or a font that is similar to it) is used on the printer without any particular action from the application. This is generally the correct result for the application, and this produces good printed results at reasonable speeds.

However, sometimes an application developer may have to select only a certain font specifically from a target printer. Historically, this was necessary on impact-type printers (for example, dot matrix printers) to obtain certain formatting or to speed up the printing.

Today, most printers are fundamentally designed as raster devices and can draw a dot (a pixel) on any part of the paper just as efficiently as all of a character glyph. For most applications, it is not an issue whether a character glyph is drawn as a whole form from a printer-resident definition or is drawn as a collection of pixels that the operating system provides. However, you may still want to use a font that only the printer provides. For example, this may occur because the font is unique and has no similar substitute in the operating system or perhaps because you want to avoid the overhead of downloading a font definition to the printer.

For the purposes of this article, "device fonts" are any fonts whose definition exists either permanently or transiently in the printer's memory. These device fonts provide a character glyph definition that can be addressed per character by the printer's page rasterizer hardware to ink the shape onto paper.

Device fonts can be categorized into three basic types:

  • True device fonts. For the purposes of this article, these are fonts that only the printer hardware provides and that you can use only on the printer.
  • Device font substitution. Fonts that exist in the operating system and that the printer hardware also provides. In this case, the printer hardware can substitute for the operating system's fonts.
  • Downloadable fonts. Fonts that the operating system provides but whose definition can be downloaded to the printer and used on the printer as if the printer hardware provided the fonts directly.

Downloadable Fonts

The operating system provides downloadable fonts, which are also known as soft fonts. When you print a document, the definition for the font is provided as part of the print job. When the printer processes the print job, the font definition is installed in the printer memory so that the font definition can be inked onto the printed page of the document.

Some argue that because the printer is drawing the character glyphs of the font, these fonts are device fonts. However, when a font definition is downloaded or when a glyph is drawn onto the printer through a bitmap, only some overhead or print job spool size is saved. This process occurs transparently to the application so that the font in the operating system can be used on the screen and on the printer. Because this article focuses on how to use device fonts that only the printer provides, this article does not describe how to use downloadable fonts.

Device Font Substitution

Device font substitution occurs when there are two, distinct font definitions: one that the operating system uses, and one that the printer uses. That is, an application selects and uses a font in the operating system in a document on the screen. When you print the document, the printed output is drawn by using the similarly-defined font that the printer provides. Therefore, the font in the operating system has been substituted on the printer with the printer-defined font.

This typically occurs on PostScript printers when a common Windows TrueType font is used. An example of this is the TrueType Arial font that is typically printed by using the PostScript font definition for the Helvetica font on most PostScript devices. This is an example of a substitution by using a similar font whose font name is actually different. In this case, you can typically find and use this similar font definition directly because the similar font definition is also exposed as a true device font. This is discussed later in this article.

Device font substitution also occurs when the font on the printer has the same name as the font that the operating system provides. This typically occurs on printers such as Hewlett-Packard LaserJet printers. Those printers typically have their own versions of the Windows core fonts such as Arial and Times New Roman. Although these fonts can also typically be found by looking for true device fonts, their use sometimes cannot be guaranteed because the printer drivers frequently select on their own or select through user settings whether to use the font that the operating system provides instead.

Device Fonts

True device fonts are those that only have a definition on the printer. The only way that an application can use these fonts is for the application to specifically identify the font and to create it for use in the printer device context.

If you know enough information about a device, you can create a logical font description in a LOGFONT structure that will result in the realization of the device font. In particular, it is important to provide the correct information for the lfFacename member, the lfHeight member, and the character set of the font. Also, the lfOutPrecision member should contain an OUT_DEVICE_PRECIS flag to influence the font mapping process to choose device fonts instead of similarly-named system fonts.

If the description of the font is not known, you can enumerate fonts to discover device fonts. To obtain a list of device fonts that the printer supports, use one of the font enumeration functions such as EnumFontFamiliesEx. Application code that is put in the callback function can examine the data that is handed to the callback function to determine which font instances describe a device font.

Using True Device Fonts

The process of using a device font in a printer device context follows these general steps:

  1. Identify the true device fonts by enumeration of the fonts in a printer device context.
  2. Select fonts that are device-only as indicated by the FontType flags and by process of elimination.
  3. Use printer-specific metrics in the MM_TEXT mapping mode to accurately place the text that is drawn by using the device font.

Enumerating the Fonts of a Printer Device Context

To enumerate all of the fonts that are available in a device context, you can use callback functions and the EnumFontFamiliesEx function from the Win32 application programming interface (API). To enumerate all of the fonts for a device context, you must call EnumFontFamiliesEx two times: first to get a list of font families, and a second time to get all of the distinct fonts that are in each font family. For more information about the complete enumeration of system fonts, see the "References" section of this article.

To find all of the device fonts on a printer device context, you must enumerate all of the fonts of the printer device context. When each font is passed to the callback functions, the font is examined to determine if it is a device font. The PrinterDeviceFontEnum and PrinterDeviceFontFamiliesEnum callback functions in the following sample code perform this operation.

// Data structure to pass data through the font enumeration callbacks.
typedef struct PrintEnumFontData
HDC hPrinterDC;
HDC hEnumDC;
int curx, cury;

int CALLBACK PrinterDeviceFontEnum(
ENUMLOGFONTEX *lpelfe, // logical-font data
NEWTEXTMETRICEX *lpntme, // physical-font data
DWORD FontType, // type of font
LPARAM lParam // application-defined data
// Crack the data out of the enumeration parameter.

// Printing information
HFONT hfont, holdfont;
int pagecx, pagecy;

// Data to determine where this font came from
ENUMEDFONT df = { FontType, lpelfe }; // To look for a system version

// What is the printable area of the page?
pagecx = GetDeviceCaps(ppeft->hPrinterDC, HORZRES);
pagecy = GetDeviceCaps(ppeft->hPrinterDC, VERTRES);

// Is it a device font?
// If it is, make sure that it is also not a TrueType font because
// that is most likely a downloaded font.
// Also, look for any system-provided fonts that are also
// masquerading as printer device fonts. This implies that they will be
// downloaded to the printer as is the case with Adobe Type 1 fonts.
// If they are downloaded, you do not want to include them in this demonstration.
if (FontType & DEVICE_FONTTYPE &&
TCHAR Buffer[MAX_PATH]; // description of font
LPTSTR szFontType; // description of type
LPTSTR pStyle = "Regular"; // Fonts Style defaults to Regular

// At this point in this code, the lpelfe parameter has been examined
// and found to describe a printer device font.
// Do something interesting with it as follows:

// Build a sample string that describes the font.
if (lpelfe->elfLogFont.lfItalic)
pStyle = "Italic";
if (lpelfe->elfLogFont.lfWeight > FW_NORMAL)
pStyle = "Bold Italic";
else if (lpelfe->elfLogFont.lfWeight > FW_NORMAL)
pStyle = "Bold";

// Determine if the font is scalable or a bitmap font.
szFontType = TEXT("Bitmap Font");
// This is an instance of a scalable font,
// use 12 pt because it is easy to read.
szFontType = TEXT("Scalable Font");
lpelfe->elfLogFont.lfHeight = MulDiv(12, GetDeviceCaps(ppeft->hPrinterDC, LOGPIXELSY), 72);
lpelfe->elfLogFont.lfWidth = 0;

// Skip all fonts after this font that are the same scale as the last one.
// However, let different sizes of 'bitmap' fonts through.
// This is a cheat that relies on enumeration order.
// Really, you should keep a 'used' list and compare against the list.
if (FontType & RASTER_FONTTYPE || !CompareLogFontEx(&ppeft->elf, lpelfe))

hfont = CreateFontIndirect(&lpelfe->elfLogFont);
holdfont = (HFONT)SelectObject(ppeft->hPrinterDC, hfont);
GetTextMetrics(ppeft->hPrinterDC, &tm);

// If beyond bottom of page, get a new page.
if (pagecy < ppeft->cury + tm.tmExternalLeading + tm.tmHeight)
ppeft->cury = 0;

// Draw our sample text.
wsprintf(Buffer, "%s %s [%s] FontType: %s", lpelfe->elfFullName, pStyle, lpelfe->elfScript, szFontType);
ppeft->cury += tm.tmExternalLeading;
TextOut(ppeft->hPrinterDC, ppeft->curx, ppeft->cury, Buffer, lstrlen(Buffer));
ppeft->cury += tm.tmHeight;

// Clean up.
SelectObject(ppeft->hPrinterDC, holdfont);

// Make a note of the font that you used so that the next time
// this callback is called, you can skip different scales of
// the same font.
CopyMemory(&ppeft->elf, lpelfe, sizeof(ENUMLOGFONTEX));
// Otherwise, continue enumeration without doing anything with this
// particular font.

return 1;

int CALLBACK PrinterDeviceFontFamiliesEnum(
ENUMLOGFONTEX *lpelfe, // logical-font data
NEWTEXTMETRICEX *lpntme, // physical-font data
DWORD FontType, // type of font
LPARAM lParam // application-defined data

ZeroMemory(&ppeft->elf, sizeof(ppeft->elf));

// Is it a device font?
// If it is, make sure that it is also not a TrueType font because
// that is most likely a downloaded font.
if (FontType & DEVICE_FONTTYPE && !(FontType & (TRUETYPE_FONTTYPE)))

// Enumerate all of the font instances that are part of this
// font family.
return EnumFontFamiliesEx(ppeft->hEnumDC,

// Otherwise, if you are not interested in this particular font,
// continue enumeration so that you can find more.
return 1;

BOOL CALLBACK AbortProc(HDC hdc, int iError)
This minimal AbortProc implementation stops the print
job when an error occurs.
if (iError)
return FALSE;
return TRUE;

BOOL PrintDeviceFontList(HDC hPrinterDC)
int ret;
LOGFONT lf; // Describes the start of the font enumeration
hPrinterDC, // Device Context on which to print
hPrinterDC, // Device Context to enumerate
0, 0, // Current print location
NULL // Last device font that is used to print
DOCINFO di; // Description of the print job

// Start the print job.
ZeroMemory(&di, sizeof(di));
di.cbSize = sizeof(di);
di.lpszDocName = TEXT("Printer Font List");

// Set a minimal AbortProc because there should always be one.
ret = SetAbortProc(hPrinterDC, (ABORTPROC) AbortProc);
if (ret < 1) return false;

ret = StartDoc(hPrinterDC, &di);
if (ret < 1) return false;

ret = StartPage(hPrinterDC);
if (ret < 1)
return false;

// Enumerate everything to start, weed out non-device fonts,
// and then print non-device fonts during enumeration.
ZeroMemory(&lf, sizeof(lf));

// Call the enumeration with your callback function that prints
// the device fonts that it finds.
ret = EnumFontFamiliesEx(hPrinterDC,

// The value 1 is returned by the callback functions to continue
// the enumeration. When the enumeration completes, EnumFontFamiliesEx
// returns the last value that the callback returns.
// Therefore, you succeed if you get 1. Let it print.
if (ret == 1)
return true;

// Otherwise, exit because you failed somewhere in the process.
return false;
You can see in the sample code where the EnumFontFamiliesEx function is called two times. The first call is made in the PrintDeviceFontList function. The second call is in the PrinterDeviceFontFamiliesEnum callback function.

PrintDeviceFontList is the top-level function. PrintDeviceFontList performs two tasks by starting a print job on the printer device context and then invoking the first call to EnumFontFamiliesEx to start the font enumeration process. According to the Platform Software Development Kit (SDK) documentation, when you set the LOGFONT structure's lfCharSet member to the DEFAULT_CHARSET value, EnumFontFamiliesEx enumerates all of the font families. After the font enumeration is complete, the code completes the print job management task by calling the EndDoc method.

The PrinterDeviceFontFamiliesEnum callback function is called for each font family by the EnumFontFamiliesEx function. In that callback function, the code initially screens the font families to find only the device fonts that are marked by the FontType parameter. It also screens out any fonts that are marked as TrueType because those fonts are likely to be downloadable fonts. For those font families that are considered device fonts, the EnumFontFamiliesEx function is called again but is passed the ENUMLOGFONTEX structure that the callback function received. The use of the callback parameter as the input parameter to the second enumeration function call causes the second enumeration to list all of the distinct fonts in that font family.

Selecting Device Fonts

You can use certain criteria of printer device fonts to distinguish these fonts from any other font that is enumerated. Specifically, look for the DEVICE_FONTTYPE value in the FontType callback function's DWORD parameter. Almost all of the fonts that are handed to the callback function with this value set are device fonts for the printer device context (except with Adobe fonts).

In the sample code, the PrinterDeviceFontEnum callback function is called by the second enumeration for each distinct font in the font family. The PrinterDeviceFontEnum callback function performs three tasks:

  • Uses the device font criteria again to make sure that the function only processes fonts that are recognized as device fonts.
  • Searches for the font by using another font enumeration to see if the device font is also used in the system's screen device context.
  • Prints a sample of the font onto the print job that is being created to demonstrate the use of the font.
This callback function uses a function named IsSystemFont, which is part of the following sample code:

BOOL CompareLogFontEx(
CONST ENUMLOGFONTEX * Destination, // copy destination
CONST ENUMLOGFONTEX * Source // memory block
Returns true if the two ENUMLOGFONTEX buffers compare.
Return false if the two buffers differ in someway as described by the
criteria below.

// Compare the string descriptions:
if (lstrcmpi((LPCTSTR )Destination->elfFullName, (LPCTSTR )Source->elfFullName) != 0)
return false;
if (lstrcmpi((LPCTSTR )Destination->elfScript, (LPCTSTR )Source->elfScript) != 0)
return false;
if (lstrcmpi((LPCTSTR )Destination->elfStyle, (LPCTSTR )Source->elfStyle) != 0)
return false;

// Height and Width are not compared because they will change
// based upon the device on which the font is enumerated.
// LONG lfHeight;
// LONG lfWidth;

// Compare the LOGFONT properties:
// LONG lfEscapement;
if (Destination->elfLogFont.lfEscapement != Source->elfLogFont.lfEscapement) return false;
// LONG lfOrientation;
if (Destination->elfLogFont.lfOrientation != Source->elfLogFont.lfOrientation) return false;
// LONG lfWeight;
if (Destination->elfLogFont.lfWeight != Source->elfLogFont.lfWeight) return false;
// BYTE lfItalic;
if (Destination->elfLogFont.lfItalic != Source->elfLogFont.lfItalic) return false;
// BYTE lfUnderline;
if (Destination->elfLogFont.lfUnderline != Source->elfLogFont.lfUnderline) return false;
// BYTE lfStrikeOut;
if (Destination->elfLogFont.lfStrikeOut != Source->elfLogFont.lfStrikeOut) return false;
// BYTE lfCharSet;
if (Destination->elfLogFont.lfCharSet != Source->elfLogFont.lfCharSet) return false;
// BYTE lfOutPrecision;
if (Destination->elfLogFont.lfOutPrecision != Source->elfLogFont.lfOutPrecision) return false;
// BYTE lfClipPrecision;
if (Destination->elfLogFont.lfClipPrecision != Source->elfLogFont.lfClipPrecision) return false;
// BYTE lfQuality;
if (Destination->elfLogFont.lfQuality != Source->elfLogFont.lfQuality) return false;
// BYTE lfPitchAndFamily;
if (Destination->elfLogFont.lfPitchAndFamily != Source->elfLogFont.lfPitchAndFamily) return false;
if (lstrcmpi((LPCTSTR )Destination->elfLogFont.lfFaceName, (LPCTSTR )Source->elfLogFont.lfFaceName) != 0) return false;

// Conclusion: the two LOGFONT enumeration buffers are comparable.
return true;

typedef struct structEnumedFont
DWORD FontType;

int CALLBACK FindSystemFontEnum(
ENUMLOGFONTEX *lpelfe, // logical-font data
NEWTEXTMETRICEX *lpntme, // physical-font data
DWORD FontType, // type of font
LPARAM lParam // application-defined data
ENUMLOGFONTEX * lpelfeSrc = pdf->elfx;

lpelfe->elfLogFont.lfHeight = lpelfeSrc->elfLogFont.lfHeight;
lpelfe->elfLogFont.lfWidth = lpelfeSrc->elfLogFont.lfWidth;

if (CompareLogFontEx(lpelfeSrc, lpelfe) && FontType == pdf->FontType)
return 0; // System font found. Stop enumeration.
return 1;

BOOL IsSystemFont(ENUMEDFONT *pdf)
Utility function that takes a font that is enumerated from a printer device
that is in the pdf parameter and that looks for it on a Screen Device
Context to conclude that the font passed in that came from the
printer is really supplied by the system.
HDC hScreenDC = GetDC(NULL); // Get the screen device context.

// If the enumeration stops by returning zero (0),
// the font was found on the screen device context so it is a
// system-supplied font.
BOOL fFound = !EnumFontFamiliesEx(hScreenDC,

// Cleanup
ReleaseDC(NULL, hScreenDC);
return fFound;
This function detects when a font that is marked as a device font but is not a true device font (according to the definition in this article). This occurs when Adobe fonts are installed into the system through either the Adobe Type Manager or through the native Adobe rasterizer that is present in Microsoft Windows 2000 or Microsoft Windows XP.

When this occurs, the font is really a system-supplied font that is downloaded to the printer, which sometimes occurs with TrueType fonts. Unfortunately, there is no flag that you can use across Windows 98, Windows Millennium Edition (Me), Windows 2000, and Windows XP that indicates that the font is an Adobe font that the system provides (unlike TrueType fonts, which include a flag). There is an indication in the NEWTEXTMETRIC structure's ntmFlags member, but this is only available in Windows 2000 and later. Therefore, the code must resort to a process of elimination. The font is removed when IsSystemFont determines that the device font is provided by both the screen device context and the printer device context.

To avoid repetitious samples of a font that scales, the code also notes when a candidate font has already been used. The specific implementation of this relies on the enumeration order of the fonts to see when sequential enumerations of a font are the same font but in a different scale. To remove fonts that are only a different scale, the code uses the CompareLogFontEx function.

NOTE: The documentation for programming Windows operating systems does not state that font instances that differ only by scale will be enumerated sequentially. The code sample uses this technique because enumeration was seen to work this way, and the reduction in the number of sample lines on the printed page is not a critical feature of the demonstration code. If you want to rely on eliminating different scales of the same font, you must keep a data structure of the device fonts that are used. Then the program must check the currently-enumerated font against that data structure.

Scalable vs. Bitmap Fonts

There are two types of device fonts that can be enumerated on printers:

  • Bitmap or raster fonts
  • Scalable fonts
Bitmap fonts are fonts that have a character glyph definition of a fixed size. Scalable fonts are fonts that have a mathematics-based definition in the printer so that they can be drawn at any size. In other words, their size scales.

The classic example of a bitmap font is Courier 10 cpi. As the name implies, this font is a hold over from the transition from typewriters to impact-type printers. It is called a bitmap font because the most common definition of the font was located in a ROM bitmap image of a dot matrix printer.

Examples of scalable, printer-resident fonts can be found in most PostScript printers where there is typically a standard set of PostScript fonts such as Helvetica and Times.

Device fonts that are not scalable have a bit that is set in the FontType parameter of the callback function. That bit is represented by the symbol RASTER_FONTTYPE in the SDK. If the FontType parameter to the callback function does not have the RASTER_FONTTYPE bit set, the font is a scalable font. For an example of how to determine this, see the PrinterDeviceFontEnum callback function of the sample code.

Drawing the Device Fonts

After fonts that are device fonts are found, the sample uses them in the printer device context on which the enumeration was performed. Device fonts are used much like other fonts by creating a logical description with the CreateFontIndirect function. This function call is passed the LOGFONT that was passed into the font enumeration callback function. After the HFONT is created, it is used in the printer device context by selecting it into the device context with the SelectObject function call.

Metrics for the device font are obtained through the GetTextMetrics function call. It is best to operate on printer device contexts by using the MM_TEXT mapping mode, which is the default mapping mode for a device context. When you use the MM_TEXT mapping mode, you avoid mathematical errors that can occur during the unit conversion process of other mapping modes.

When you use a device font in a printer device context, you must be careful not to transport the metrics for the font and the strings to other device contexts. This is true particularly of memory device contexts. By definition, a memory device context is not the print job but is a temporary memory buffer of raster graphics and therefore cannot use a device font.

There is another significant consideration when you use printer device fonts: you cannot provide a What-You-See-Is-What-You-Get type preview of the print job. Clearly, fonts that reside in the printer hardware cannot be drawn onto the screen. The closest that you can come to previewing the print job is to find a system-supplied font that has the general characteristics of a printer device font and then draw the glyphs of that font on the screen by using the ExtTextOut function to simulate the placement of the character glyphs on the printed page.

Problems Using Device Fonts

You may experience the following problems when you use device fonts:

  • There is a device font, but the printer driver does not enumerate it.

    There are two reasons why you may not be able to find a device font by enumerating the fonts available for use on a printer device context:
    • The printer driver was written to exclude that device font for some reason.
    • The printer driver enumerates the font, but the font is not properly marked in the FontType parameter as a device font.
  • There are system fonts that seem to enumerate as device fonts.

    This problem occurs when a system-provided font is downloaded to a printer.

    When this occurs with TrueType fonts, the font enumeration callback function receives a call with the TRUETYPE_FONTTYPE and the DEVICE_FONTTYPE bits set on the FontType parameter. This is handled in the sample code by not including any fonts that contain these combinations of bits.

    This also occurs with Adobe PostScript fonts that are installed in the system that are downloaded to the printer. One way to differentiate these fonts from the other device fonts is to look for them in both a system screen device context and the printer device context. If the same font can be enumerated on both device contexts, the font will likely be downloaded to the printer when it is used on the printer device context.
  • My printer driver enumerates several scalable device fonts, but they appear to be the same except for their sizes.

    Many printer drivers enumerate a scalable font by providing several different instances of the same font with different sizes. This is handled in the sample code by comparing the various instances of those fonts that are presumed to be scalable by using the CompareLogFontEx function.

    NOTE: When the FontType parameter to the callback function has the RASTER_FONTTYPE bit set, the multiple enumerations provide descriptions of specific instances of the non-scalable fonts for each size. Each callback enumerates the only sizes in which that font is available.
  • Some printers appear not to have device fonts.

    This is true. Some printers, namely ink jet-type printers, do not provide device fonts. These printers are strictly raster devices and therefore do not have printer-resident font definitions.


For additional information, click the article numbers below to view the articles in the Microsoft Knowledge Base:

99672 INFO: Complete Enumeration of System Fonts
75469 How To Accurately Showing on the Screen What Will Print
230342 How To Determine When Font Creation Was Successful

文章 ID:201978 - 上次审阅时间:2014年6月22日 - 修订版本: 1