CurrentControlSet\Services 子機碼項目

重要:本文是以 Microsoft 機器翻譯軟體翻譯而成,而非使用人工翻譯而成。Microsoft 同時提供使用者人工翻譯及機器翻譯兩個版本的文章,讓使用者可以依其使用語言使用知識庫中的所有文章。但是,機器翻譯的文章可能不盡完美。這些文章中也可能出現拼字、語意或文法上的錯誤,就像外國人在使用本國語言時可能發生的錯誤。Microsoft 不為內容的翻譯錯誤或客戶對該內容的使用所產生的任何錯誤或損害負責。Microsoft也同時將不斷地就機器翻譯軟體進行更新。

這份文件包含 CurrentControlSet\Services 子機碼的登錄項目。沒有子群組。

CurrentControlSet\Services 有子機碼

The Services subkeys under the following registry path contain parametersfor the device drivers, file system drivers, and Win32 service drivers:HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\ServicesThe name of each Services subkey is the name of the service, which is alsothe root of the name of the file from which the service is loaded. Forexample, for the serial mouse, the service name and Services subkey name isSermouse. The file from which this is loaded is:SystemRoot\SYSTEM32\DRIVERS\SERMOUSE.SYS.All service names are defined under:     HKEY_LOCAL_MACHINE\SOFTWARE.The names of the Windows NT built-in network services such as the Alerterand Browser services are defined under the Microsoft\WindowsNT\CurrentVersion subkey in the Software area of the Registry.Each Services key can have additional subkeys. Many services have a Linkagesubkey, which provides data for binding network components, as described in"Linkage Subkey Entries for Network Components," in the article "NetworkAdapter Cards Entries, PART 1." Many services also have a Parameters subkeythat contains entries defined by the service with values for configuringthe specific service.Values for Parameters subkeys and other service-specific entries aredescribed in these articles:Network Adapter Cards EntriesDevice Drivers EntriesNetwork Services EntriesThe following standard value entries appear for each Services subkey:ErrorControl     REG_DWORD     Error constantSpecifies the level of error control for the service as follows:Error Control  MeaningLevel0x3 (Critical) Fail the attempted system startup.               If the startup is not using the               LastKnownGood control set, switch to               LastKnownGood. If the startup attempt               is using LastKnownGood, run a bug-check               routine.0x2 (Severe)   If the startup is not using the               LastKnownGood control set, switch to               LastKnownGood. If the startup attempt               is using LastKnownGood, continue on               in case of error.0x1 (Normal)   If the driver fails to load or initialize,               startup should proceed, but display a               warning.0x0 (Ignore)   If the driver fails to load or initialize,               start up proceeds. No warning is displayed.Group     REG_SZ     Group nameSpecifies the name of the group of which the particular service is amember.Default: (null)DependOnGroup     REG_MULTI_SZ     Group nameSpecifies zero or more group names. If one or more groups is listed, atleast one service from the named group must be loaded before this serviceis loaded.Default: (empty)DependOnService     REG_MULTI_SZ     Service nameSpecifies zero or more Services subkey names. If a service is listed here,that named service must be loaded before this service is loaded.Default: (empty)ImagePath     REG_DWORD     Path and filenameSpecifies a path name. For adapters, this value is ignored.Default: For a driver:     systemroot\SYSTEM32\DRIVERS\driverName.SYSFor a service:     systemroot\SYSTEM32\serviceName.EXE(where driverName or serviceName is the same as the related Services subkeyname)ObjectName     REG_DWORD     Object nameSpecifies an object name. If Type specifies a WIN32 Service, this name isthe account name that the service will use to log on when the service runs.If Type specifies a Kernel driver or file system driver, this name is theWindows NT driver object name that the I/O Manager uses to load the devicedriver.Default: subkeyNameStart     REG_DWORD     Start constantSpecifies the starting values for the service as follows:START TYPE     LOADER     MEANING0x0            Kernel     Represents a part of the(Boot)                    driver stack for the boot                          (startup) volume and must                          therefore be loaded by the                          Boot Loader.0x1            I/O        Represents a driver to be loaded(System)       subsystem  at Kernel initialization.0x2            Service    To be loaded or started(Auto load)    Control    automatically for all startups,               Manager    regardless of service type.0x3            Service    Available, regardless of type,(Load on       Control    but will not be started untildemand)        Manager    the user starts it (for example,                          by using the Devices icon in                          Control Panel).0x4            Service    NOT TO BE STARTED UNDER ANY(disabled)     Control    CONDITIONS.               ManagerThe Start value is ignored for adapters. If Type is a Win32 Service value(as described below), the Start value must specify an Auto, Demand, orDisabled value.Tag     REG_DWORDSpecifies a load order within a given group. The value of Tag specifies anumber that is unique within the group of which the service is a member.The related GroupName entry under the Control\GroupOrderList subkeyspecifies a list of tags, in load order.For example, the following services that are members of the Primary Diskgroup could have these values: Tag=4 for the Abiosdsk subkey, Tag=2 forAtdisk, Tag=1 for Cpqarray, and Tag=3 for Floppy. The value for PrimaryDisk under the GroupOrderList subkey will use these Tag values to specifythe defined order for loading these services. As another example, each SCSIminiport service has a unique Tag value that is used as an identifier inthe SCSI miniport value under the GroupOrderList subkey to define whichSCSI adapter to load first.Type     REG_DWORD     Type constantSpecifies the type of service as follows:Service Type   Description0x1            A Kernel device driver.0x2            File system driver, which is also               a Kernel device driver.0x4            A set of arguments for an adapter.0x10           A Win32 program that can be started               by the Service Controller and that               obeys the service control protocol.               This type of Win32 service runs in               a process by itself.0x20           A Win32 service that can share a process               with other Win32 services.For example, when you start Windows NT, the Boot Loader scans the Registryfor drivers with a Start value of 0 (which indicates that these driversshould be loaded but not initialized before the Kernel) and a Type value of0x1 (which indicates a Kernel device driver such as a hard disk or otherlow-level hardware device driver). The drivers are then loaded into memoryin the order specified as the List value inCurrentControlSet\Control\ServiceGroupOrder.				
"「 Windows NT 資源工具箱 」 的作業系統版本 3.1 」。



文章識別碼:103000 - 最後檢閱時間:12/04/2015 09:39:23 - 修訂: 3.0

Microsoft Windows NT Advanced Server 3.1, Microsoft Windows NT Workstation 3.1, Microsoft Windows NT Advanced Server 3.1

  • kbnosurvey kbarchive kbmt kbother KB103000 KbMtzh