3Com 快速 EtherLink 和 EtherLink III 配接器組態

重要:本文是以 Microsoft 機器翻譯軟體翻譯而成,而非使用人工翻譯而成。Microsoft 同時提供使用者人工翻譯及機器翻譯兩個版本的文章,讓使用者可以依其使用語言使用知識庫中的所有文章。但是,機器翻譯的文章可能不盡完美。這些文章中也可能出現拼字、語意或文法上的錯誤,就像外國人在使用本國語言時可能發生的錯誤。Microsoft 不為內容的翻譯錯誤或客戶對該內容的使用所產生的任何錯誤或損害負責。Microsoft也同時將不斷地就機器翻譯軟體進行更新。

154989
本文已封存。本文係以「現狀」提供且不會再更新。
結論
本文將告訴您 「 3Com 快速 EtherLink 和 3Com EtherLink III 匯流排主介面卡設定] 及 [診斷程式指示。
其他相關資訊
程式的組態部分可讓您變更配接器組態參數。這可讓配置器符合特定環境已安裝。 診斷部分設定及診斷程式的設計被為了確定介面卡安裝正確,而且您的電腦中正確運作。群組 1 測試會檢查實體元件、 連接器和配接器的電路系統,並只需要將介面卡安裝在電腦。群組 2 測試會檢查傳輸網路上的資料和需要介面卡連接回送插件,或網路介面卡的能力。群組 3 測試會檢查正確傳輸及接收資料透過網路和需要介面卡連線到網路,在其的回應伺服器已設定配接器的能力。

包含要設定或測試配接器的電腦必須執行 MS-DOS 只。

注意: 如果這台電腦的作業伺服器通知伺服器的所有使用者能儲存他們的工作並登出網路。設定及診斷程式中斷伺服器和工作站,正常的作業,因此無法儲存的工作可能會遺失。

關閉伺服器,然後與 MS-DOS 只有磁碟重新啟動。這種方式無驅動程式或常駐程式將執行啟動程式時。

啟動組態與診斷程式

有兩種方法來啟動程式:
  • 自動,從藉由在 [設定] 及 [診斷] 子功能表中選取選項 Install.exe 程式。

    -或者-
  • 手動,從 EtherDisk 磁碟的輸入下列命令以根目錄:

    3C59XCFG [命令關鍵字] [參數清單]

    3C59XCFG 代表 3Com 設定及診斷程式名稱。 方括號表示命令關鍵字和參數清單都是選擇性。

    3C59XCFG 不含任何引數叫用完整的 Windows 模式中程式。 這包括滑鼠支援和即時線上說明。說明在任何時候,您可以按下 F1。

命令列的關鍵字

您可以使用任何命令或參數中的前兩個字元作為捷徑。比方說 3C59XCFG HE RU 表示 3C59XCFG HELP 執行。而且,命令關鍵字和參數是不區分大小寫的。請參閱下列的命令列的關鍵字和其描述的清單。
   Keyword      Description   ------------------------   Configure    Configures an adapter in one of three ways:                1. Automatically with /auto parameter                2. Using a specified adapter configuration file                3. Using command-line configuration parameters   Echoserver   Enables a designated adapter to function within the echo                server.   Help         Displays general or command-specific help information. To                get command-specific help, type:                   3C59XCFG Help [command keyword]   Language     Invokes the program in full Windows mode using a specified                external resource file. This option provides support for                multiple languages via a different resource file for each                language supported.   List         Displays a list of installed adapters recognized by this                program and their assigned adapter numbers.   Run          Runs the diagnostic tests (which can also be specified                from a file) on a selected adapter and writes the results                to the screen, a file, or a printer.CONFIGURATION=============The adapter can be configured in one of the following four ways, which aredescribed in greater detail below: - Full-Screen Windows Mode - Command Line with Auto Configuration - Command Line with Explicit Parameters - Command Line with Configuration File   Full Screen Windows Mode   ------------------------   To configure the adapter using the full-screen windowing, type      3C59XCFG   and press ENTER. Then click Configure Adapter on the Install menu.   Command Line Options   --------------------   Defaults: Configure has /Auto and /Adapternum:1 as defaults. For   example, if only "3C59XCFG Configure" is used, adapter 1 will be   automatically configured.   /Adapternum:<N> specifies the adapter number to be configured for PCI   and EISA computers. Run the LIST command separately to determine the   adapter number to use here.   /Slot:<S> specifies the physical slot number of the adapter to be   configured in EISA computers.   NOTE: The /Adapternum:<N> and /Slot:<S> parameters can be used with any   of the Configure options that follow. They are both intended for use   whenever multiple adapters are present in the computer and recognized by   the Configuration and Diagnostic Program.   Command Line with Auto Configuration   ------------------------------------   Command syntax: 3C59XCFG Configure /Auto   The /Auto parameter configures the adapter to automatically select the   media type. All other option settings are left unchanged.   NOTE: To set the media type, the program will attempt to detect what   media type is being used. Therefore, you should connect to the network   first, then run /Auto, and it will configure the media type for you.   Command Line with Explicit Parameters   -------------------------------------   Command syntax:  3C59XCFG Configure [/Bsize:<N> /Xcvr:<N> /Tr:<N>                    /Fullduplex:<N> /Optimize:<N> /Linkbeat:<N>]   Command-line configuration parameters are used to configure the adapter   using only the option settings you specify. Some parameters are for all   adapters, while others are for PCI only. For example, /Bsize:<N> is a   PCI- only parameter, because with EISA adapters, the computer vendor's   configuration utility or the option disk handles the setting of the Boot   PROM size. In most cases, any combination of parameters can be used.   Therefore, it is possible to modify only a few settings if needed. See   below for a list of parameters.      Parameter       Description      ---------------------------      /Bsize          Boot PROM Size (PCI only).                      Possible values - 8, 16, 32, 64, Disabled.      /Tr (or /Xcvr)  Transceiver (PCI only).                      Possible values - 100BASE-TX, Tp, 10BASE-T (same as                      Tp), Coax, Aui, External (same as Aui).      /Optimize       Network Driver Optimization.                      Possible values - Normal, Network, Cpu.      /Linkbeat       Link beat enable/disable (pre-10BASE-T standard                      only).                      Possible values - Enabled, Disabled.                      NOTE: Try this setting ONLY if pre-10BASE-T standard                      hubs are in use.      /Fullduplex     Full duplex enable or disable (for 10BASE-T only).                      Possible values - Enabled, Disabled.                      NOTE: Enable this setting ONLY when the adapter is                      connected to a 10BASE-T repeater supporting full                      duplex.                      Otherwise, it will bring down the network.   Command Line with Configuration File   ------------------------------------   Command syntax: 3C59XCFG Configure /Configfile:<filename>   This syntax is used to configure an adapter with the settings specified   in an ASCII configuration file that can be created and modified by any   text editor. The file name can be a fully qualified MS-DOS file name   including a path. A standard format for the file must be used, as   follows:    - Variable names and values should match the wording in the full-screen      configuration window in most cases.    - Each variable or value line should begin with an "at" symbol (@),      followed by a variable name, a colon (:), and the value.      For example: @Media type: 100BASE-TX    - Any comment lines should start with a semicolon (;).    - Blank lines and other white space is allowed between variable lines.    - The variable names allowed are:         Boot PROM size         Media type         Network driver optimization         Full Duplex         Link beat    - The values allowed are the same as those shown in the full-screen      configuration window.      Example 1: @Network driver optimization:Normal      Example 2: @Media type:On-board CoaxDIAGNOSTICS=========== - Full screen Windows mode:   To run the diagnostic tests using full-screen windowing, type   "3C59XCFG" (without the quotes) and press ENTER. Then click Run Tests on   the Tests menu. - Command-line option:   Command syntax: 3C59XCFG Run [/Testfile:<filename>]   [/RESULTS:[<filename> | PRN | PRNHP]] [/ADAPTERNUM:<N> | /SLOT:<S>]   The Run parameter runs the diagnostic tests on a selected adapter   and displays the results on the screen. The defaults are Adapter 1 and   Group 1 tests. The parameters below are all optional.      /Testfile:<filename> specifies a test file that contains a specific      test setup description.      /Results:[<filename> or PRN or PRNHP] specifies an alternative      location to store the test results. This location can be an MS-DOS      path and filename, PRN printer port (same as LPT1), or PRNHP, which      is an HP LaserJet printer connected to LPT1.      /Adapternum:<N> specifies the adapter number to be tested, in the      case of multiple adapters installed in the computer and recognized by      this program. Run the List command separately (see List below) to      determine the adapter number to use.      /Slot:<S> specifies the physical slot number of the adapter to be      tested when multiple adapters are installed in EISA computers.OTHER COMMAND LINE OPTIONS========================== - Help   Command syntax: 3C59XCFG Help [Command Keyword]   Help is an online summary of commands. Without a command keyword, it   gives a summary of the command keywords. With a command keyword   specified, it gives the parameter choices for that particular command.   For example, "3C59XCFG Help Configure" gives details about the parameter   options for the Configure command. - Language   Command syntax: 3C59XCFG Language /Langfile:<filename>   Language invokes the program in full Windows mode using a specified   external resource file. This option provides support for multiple   languages via a different resource file for each language supported.   This command requires the /Langfile:<filename> parameter. The   file name is the name of the resource file that is loaded by the   program. The file name can be a fully qualified MS-DOS file name.   NOTE: At this time, there are no alternate resource files included on   the EtherDisk disk. - List   Command syntax: 3C59XCFG List   List displays a list of currently installed adapters (and their assigned   adapter numbers) that are recognized by this program. The adapter number   is then used as the <N> value for the /Adapternum:<N> parameter when   multiple adapters are installed. There are no parameters associated with   the List command keyword. - Echoserver   Command syntax: 3C59XCFG Echoserver [/Adapternum:<N> | /Slot:<S>]   Echoserver enables an adapter to function within an echo server.   In the case of multiple adapters, /Adapternum:<N> specifies the adapter   number to be configured in the echo server. The /Slot:<S> parameter is   available only on EISA computers, and refers to the physical slot in the   echo server where the adapter is located.FURTHER ASSISTANCE==================If the adapter fails any of the diagnostic tests, see the Trouble.txt filein the Diag directory on the EtherDisk disk for troubleshootingprocedures.The Support.txt file in the Info directory on the EtherDisk disk providesinformation about obtaining product support for the adapter.				
EtherDisk]、 [EtherLink,] 和 [3Com 是 3Com Corporation 的註冊的商標。所有其他商標為各擁有者的屬性。

如需詳細資訊,請連絡在 3com Corporation 技術支援部門: (800) 876-3266。

這裡包含產品製造廠商與 Microsoft 無關 ; 我們不以暗示或其他方式,提供與這些產品的效能或可靠性有關的保證。
3com Nic 網路卡驅動程式安裝安裝 3 com 診斷匯流排主介面卡 prodnt

警告:本文已自動翻譯

內容

文章識別碼:154989 - 最後檢閱時間:02/22/2014 04:26:12 - 修訂: 2.2

  • Microsoft Windows 2000 Server
  • Microsoft Windows 2000 Advanced Server
  • Microsoft Windows 2000 Professional Edition
  • Microsoft Windows NT Workstation 3.5
  • Microsoft Windows NT Workstation 3.51
  • Microsoft Windows NT Workstation 4.0 Developer Edition
  • Microsoft Windows NT Server 3.5
  • Microsoft Windows NT Server 3.51
  • Microsoft Windows NT Server 4.0 Standard Edition
  • kbnosurvey kbarchive kbmt kb3rdparty kbhowto kbsetup KB154989 KbMtzh
意見反應