"Nothing to handle" error message when you create a pick in the pick worksheet in Microsoft Dynamics NAV 5.0 SP1

Hotfix information

A supported hotfix is now available from Microsoft. However, it is only intended to correct the problem that is described in this article. Apply it only to systems that are experiencing this specific problem. This hotfix may receive additional testing. Therefore, if you are not severely affected by this problem, we recommend that you wait for the next Microsoft Dynamics NAV 5.0 service pack or the next Microsoft Dynamics NAV version that contains this hotfix.

Note In special cases, charges that are ordinarily incurred for support calls may be canceled if a Technical Support Professional for Microsoft Dynamics and related products determines that a specific update will resolve your problem. The usual support costs will apply to additional support questions and issues that do not qualify for the specific update in question.

Installation information

Microsoft provides programming examples for illustration only, without warranty either expressed or implied. This includes, but is not limited to, the implied warranties of merchantability or fitness for a particular purpose. This article assumes that you are familiar with the programming language that is being demonstrated and with the tools that are used to create and to debug procedures. Microsoft support engineers can help explain the functionality of a particular procedure, but they will not modify these examples to provide added functionality or construct procedures to meet your specific requirements.

Note Before you install this hotfix, verify that all Microsoft Navision client users are logged off the system. This includes Microsoft Navision Application Services (NAS) client users. You should be the only client user who is logged on when you implement this hotfix.

To implement this hotfix, you must have a developer license.

We recommend that the user account in the Windows Logins window or in the Database Logins window be assigned the "SUPER" role ID. If the user account cannot be assigned the "SUPER" role ID, you must verify that the user account has the following permissions:

• The Modify permission for the object that you will be changing.

• The Execute permission for the System Object ID 5210 object and for the System Object ID 9015 object.

Note You do not have to have rights to the data stores unless you have to perform data repair.

Code changes

Note Always test code fixes in a controlled environment before you apply the fixes to your production computers.
To resolve this problem, follow these steps:

1. Change the code in the Keys in the Prod. Order Component table (5407) as follows:
   

   Existing code

   ...
          {    ;Status,Prod. Order No.,Routing Link Code,Flushing Method }
   
         {    ;Status,Prod. Order No.,Location Code     }
   
         {    ;Item No.,Variant Code,Location Code,Status,Due Date;
   
   // Delete the following line.
                                                        SumIndexFields=Expected Quantity,Remaining Qty. (Base),Cost Amount,Overhead Amount;
   // End of the deleted line.
   
                                                        MaintainSIFTIndex=No }
   
         {    ;Status,Prod. Order No.,Prod. Order Line No.,Item Low-Level Code;
   
                                                        MaintainSQLIndex=No }
   ...
   

   Replacement code

   ...
         {    ;Status,Prod. Order No.,Routing Link Code,Flushing Method }
   
         {    ;Status,Prod. Order No.,Location Code     }
   
         {    ;Item No.,Variant Code,Location Code,Status,Due Date;
   
   // Add the following line.
                                                        SumIndexFields=Expected Quantity,Remaining Qty. (Base),Cost Amount,Overhead Amount,Qty. Picked (Base);
   // End of the added line.
   
                                                        MaintainSIFTIndex=No }
   
         {    ;Status,Prod. Order No.,Prod. Order Line No.,Item Low-Level Code;
   
                                                        MaintainSQLIndex=No }
   ...
   

2. Change the code in the Fields in the Warehouse Activity Line table (5767) as follows:
   

   Existing code

   ...
                                                                                ERROR(Text015);
   
                                                                                 IF "Bin Code" <> '' THEN BEGIN
   
                                                                                   CreatePick.CheckReservation(
   
   // Delete the following lines.
                                                                                     "Location Code","Source Type","Source Subtype","Source No.",
   
                                                                                     "Source Line No.","Source Subline No.","Qty. per Unit of Measure","Qty. to Handle (Base)");
   // End of the deleted lines.
   
                                                                                   CreatePick.GetReservationStatus(ReservationExists,ReservedForItemLedgEntry);
   
                                                                                   IF ReservationExists AND NOT ReservedForItemLedgEntry THEN
   
                                                                                     ERROR(Text016,"Item No.");   
   ...

   Replacement code

   ...
                                                                                  ERROR(Text015);
   
                                                                                 IF "Bin Code" <> '' THEN BEGIN
   
                                                                                   CreatePick.CheckReservation(
   
   // Add the following lines.
                                                                                     AvailableQty,"Location Code","Source Type","Source Subtype","Source No.",
   
                                                                                     "Source Line No.","Source Subline No.","Qty. per Unit of Measure",
   
                                                                                     "Qty. to Handle","Qty. to Handle (Base)");
   // End of the added lines.
   
   
   
                                                                                   CreatePick.GetReservationStatus(ReservationExists,ReservedForItemLedgEntry);
   
                                                                                   IF ReservationExists AND NOT ReservedForItemLedgEntry THEN
   
                                                                                     ERROR(Text016,"Item No."); 
   ...

3. Change the code in the Documentation in the Whse. Management codeunit (5775) as follows:
   

   Existing code

   ...
            ERROR(Text000);
   
         END;
   
   
   
   // Delete the following line.
         BEGIN
   // End of the deleted line.
   
         END.
   
       }
   
     }  
   ...

   Replacement code

   ...
            ERROR(Text000);
   
         END;
   
   
   
   // Add the following lines.
         PROCEDURE GetOutboundDocLineQtyOtsdg@3(SourceType@1006 : Integer;SourceSubType@1005 : '0,1,2,3,4,5,6,7,8,9,10';SourceNo@1004 : Code[20];SourceLineNo@1003 : Integer;SourceSubLineNo@1002 : Integer;VAR QtyOutstanding@1001 : Decimal;VAR QtyBaseOutstanding@1000 : Decimal);
   
         VAR
   
           WhseShptLine@1009 : Record 7321;
   
         BEGIN
   
           WhseShptLine.SETCURRENTKEY("Source Type");
   
           WhseShptLine.SETRANGE("Source Type",SourceType);
   
           WhseShptLine.SETRANGE("Source Subtype",SourceSubType);
   
           WhseShptLine.SETRANGE("Source No.",SourceNo);
   
           WhseShptLine.SETRANGE("Source Line No.",SourceLineNo);
   
           IF WhseShptLine.FINDSET THEN BEGIN
   
             WhseShptLine.CALCSUMS("Qty. Outstanding (Base)","Qty. Outstanding");
   
             QtyOutstanding := WhseShptLine."Qty. Outstanding";
   
             QtyBaseOutstanding := WhseShptLine."Qty. Outstanding (Base)";
   
           END ELSE
   
             GetSrcDocLineQtyOutstanding(SourceType,SourceSubType,SourceNo,
   
               SourceLineNo,SourceSubLineNo,QtyOutstanding,QtyBaseOutstanding);
   
         END;
   
   
   
         PROCEDURE GetSrcDocLineQtyOutstanding@7(SourceType@1006 : Integer;SourceSubType@1005 : '0,1,2,3,4,5,6,7,8,9,10';SourceNo@1004 : Code[20];SourceLineNo@1003 : Integer;SourceSubLineNo@1002 : Integer;VAR QtyOutstanding@1001 : Decimal;VAR QtyBaseOutstanding@1000 : Decimal);
   
         VAR
   
           SalesLine@1008 : Record 37;
   
           PurchaseLine@1009 : Record 39;
   
           TransferLine@1010 : Record 5741;
   
           ServiceLine@1012 : Record 5902;
   
           ProdOrderComp@1013 : Record 5407;
   
           ProdOrderLine@1014 : Record 5406;
   
         BEGIN
   
           CASE SourceType OF
   
             DATABASE::"Sales Line":
   
               IF SalesLine.GET(SourceSubType,SourceNo,SourceLineNo) THEN BEGIN
   
                 QtyOutstanding := SalesLine."Outstanding Quantity";
   
                 QtyBaseOutstanding := SalesLine."Outstanding Qty. (Base)";
   
               END;
   
             DATABASE::"Purchase Line":
   
               IF PurchaseLine.GET(SourceSubType,SourceNo,SourceLineNo) THEN BEGIN
   
                 QtyOutstanding := PurchaseLine."Outstanding Quantity";
   
                 QtyBaseOutstanding := PurchaseLine."Outstanding Qty. (Base)";
   
               END;
   
             DATABASE::"Transfer Line":
   
               IF TransferLine.GET(SourceNo,SourceLineNo) THEN
   
                 CASE SourceSubType OF
   
                   0: // Direction = Outbound
   
                     BEGIN
   
                       QtyOutstanding :=
   
                         ROUND(TransferLine."Whse Outbnd. Otsdg. Qty (Base)" / (QtyOutstanding / QtyBaseOutstanding),0.00001);
   
                       QtyBaseOutstanding := TransferLine."Whse Outbnd. Otsdg. Qty (Base)";
   
                     END;
   
                   1: // Direction = Inbound
   
                     BEGIN
   
                       QtyOutstanding :=
   
                         ROUND(TransferLine."Whse. Inbnd. Otsdg. Qty (Base)" / (QtyOutstanding / QtyBaseOutstanding),0.00001);
   
                       QtyBaseOutstanding := TransferLine."Whse. Inbnd. Otsdg. Qty (Base)";
   
                     END;
   
                 END;
   
             DATABASE::"Service Line":
   
               IF ServiceLine.GET(SourceSubType,SourceNo,SourceLineNo) THEN BEGIN
   
                 QtyOutstanding := ServiceLine."Outstanding Quantity";
   
                 QtyBaseOutstanding := ServiceLine."Outstanding Qty. (Base)";
   
               END;
   
             DATABASE::"Prod. Order Component":
   
               IF ProdOrderComp.GET(SourceSubType,SourceNo,SourceLineNo,SourceSubLineNo) THEN BEGIN
   
                 QtyOutstanding := ProdOrderComp."Remaining Quantity";
   
                 QtyBaseOutstanding := ProdOrderComp."Remaining Qty. (Base)";
   
               END;
   
             DATABASE::"Prod. Order Line":
   
               IF ProdOrderLine.GET(SourceSubType,SourceNo,SourceLineNo) THEN BEGIN
   
                 QtyOutstanding := ProdOrderLine."Remaining Quantity";
   
                 QtyBaseOutstanding := ProdOrderLine."Remaining Qty. (Base)";
   
               END;
   
             ELSE BEGIN
   
               QtyOutstanding := 0;
   
               QtyBaseOutstanding := 0;
   
             END;
   
           END;
   
         END;
   
   
   
         BEGIN
   // End of the added lines.
   
         END.
   
       }
   
     }
   ...

4. Change the code in the CalcLineReservedQtyonInvt function in the WMS Management codeunit (7302) as follows:
   

   Existing code

   ...
                   ReservEntry2.SETRANGE("Lot No.",LotNo);
   
               IF ReservEntry2.FIND('-') THEN
   
                 REPEAT
   
   // Delete the following line.
                   ReservQtyonInvt := ReservQtyonInvt + ReservEntry2."Quantity (Base)";
   // End of the deleted line.
   
                 UNTIL ReservEntry2.NEXT = 0;
   
             UNTIL ReservEntry.NEXT = 0;
   
           EXIT(ReservQtyonInvt);
   ...
   

   Replacement code

   ...
                  ReservEntry2.SETRANGE("Lot No.",LotNo);
   
               IF ReservEntry2.FIND('-') THEN
   
                 REPEAT
   
   // Add the following line.
                   ReservQtyonInvt := ReservQtyonInvt + ReservEntry2."Quantity (Base)" - ReservEntry2."Reserved Pick & Ship Qty.";
   // End of the added line.
   
                 UNTIL ReservEntry2.NEXT = 0;
   
             UNTIL ReservEntry.NEXT = 0;
   
           EXIT(ReservQtyonInvt);
   ...
   

5. Change the code in the CreateTempLine function in the Create Pick codeunit (7312) as follows:
   

   Existing code 1

   ...
           RemQtyToPickBase@1000000002 : Decimal;
   
           QtyToPickBase@1000000001 : Decimal;
   
           QtyToTrackBase@1009 : Decimal;
   
   // Delete the following lines.
         BEGIN
   
           CheckReservation(
   
             LocationCode,SourceType,SourceSubType,SourceNo,SourceLineNo,SourceSubLineNo,
   
             QtyPerUnitofMeasure,TotalQtytoPick);
   // End of the deleted lines.
   
   
           RemQtyToPick := TotalQtytoPick;
   
           RemQtyToPickBase := TotalQtytoPickBase;
   
           ItemTrackingMgt.CheckWhseItemTrkgSetup(ItemNo,SNRequired,LNRequired,FALSE);
   ...
   

   Replacement code 1

   ...
         RemQtyToPickBase@1000000002 : Decimal;
   
           QtyToPickBase@1000000001 : Decimal;
   
           QtyToTrackBase@1009 : Decimal;
   
   // Add the following lines.
           QtyBaseMaxAvailToPick@1014 : Decimal;
   
         BEGIN
   
   
           GetLocation(LocationCode);
   
           IF Location."Directed Put-away and Pick" THEN
   
             QtyBaseMaxAvailToPick := // Total qty (excl. Receive bin content) that are not assigned to any activity/ order
   
               CalcTotalQtyOnBinType('',LocationCode,ItemNo,VariantCode) -
   
               CalcTotalQtyAssgndOnWhse(LocationCode,ItemNo,VariantCode) +
   
               CalcTotalQtyAssgndOnWhseAct(TempWhseActivLine."Activity Type"::"Put-away",LocationCode,ItemNo,VariantCode) -
   
               CalcTotalQtyOnBinType(GetBinTypeFilter(0),LocationCode,ItemNo,VariantCode) // Receive area
   
           ELSE
   
             QtyBaseMaxAvailToPick :=
   
               CalcAvailableQty(ItemNo,VariantCode,1) -
   
               CalcPickQtyAssigned(LocationCode,ItemNo,VariantCode,FromBinCode,TempWhseItemTrkgLine);
   
           CheckReservation(
   
             QtyBaseMaxAvailToPick,LocationCode,SourceType,SourceSubType,SourceNo,SourceLineNo,SourceSubLineNo,
   
             QtyPerUnitofMeasure,TotalQtytoPick,TotalQtytoPickBase);
   // End of the added lines.
   
           RemQtyToPick := TotalQtytoPick;
   
           RemQtyToPickBase := TotalQtytoPickBase;
   
           ItemTrackingMgt.CheckWhseItemTrkgSetup(ItemNo,SNRequired,LNRequired,FALSE);   
   ...
   

   
   

   Existing code 2

   ...
              CreateTempItemTrkgLines(ItemNo,VariantCode,QtyToTrackBase);
   
           END;
   
   
   // Delete the following line.
           IF TotalQtytoPick <>0 THEN BEGIN
   // End of the deleted line.
   
             TempWhseItemTrkgLine.RESET;
   
             TempWhseItemTrkgLine.SETFILTER("Qty. to Handle",'<> 0');
   
             IF TempWhseItemTrkgLine.FIND('-') THEN BEGIN 
   ...
   

   Replacement code 2

   ...
              CreateTempItemTrkgLines(ItemNo,VariantCode,QtyToTrackBase);
   
           END;
   
   
   // Add the following line.
           IF TotalQtytoPickBase <> 0 THEN BEGIN
   // End of the added line.
   
             TempWhseItemTrkgLine.RESET;
   
             TempWhseItemTrkgLine.SETFILTER("Qty. to Handle",'<>0');
   
             IF TempWhseItemTrkgLine.FIND('-') THEN BEGIN
   ...
   

6. Change the code in the CheckReservation function in the Create Pick codeunit (7312) as follows:
   

   Existing code 1

   ...
            END;
   
         END;
   
   // Delete the following line.
         PROCEDURE CheckReservation@45(LocationCode@1007 : Code[10];SourceType@1005 : Integer;SourceSubType@1004 : '0,1,2,3,4,5,6,7,8,9,10';SourceNo@1003 : Code[20];SourceLineNo@1002 : Integer;SourceSubLineNo@1001 : Integer;QtyPerUnitofMeasure@1000 : Decimal;VAR Quantity@1006 : Decimal);
   // End of the deleted line.
   
         VAR
   
           ReservEntry@1010 : Record 337;
   
           ReservEntry2@1011 : Record 337;
   ...
   

   Replacement code 1

   ...
             END;
   
         END; 
   
   // Add the following line.
         PROCEDURE CheckReservation@45(QtyBaseAvailToPick@1009 : Decimal;LocationCode@1007 : Code[10];SourceType@1005 : Integer;SourceSubType@1004 : '0,1,2,3,4,5,6,7,8,9,10';SourceNo@1003 : Code[20];SourceLineNo@1002 : Integer;SourceSubLineNo@1001 : Integer;QtyPerUnitofMeasure@1000 : Decimal;VAR Quant
   
   ity@1006 : Decimal;VAR QuantityBase@1008 : Decimal);
   // End of the added line.
   
         VAR
   
           ReservEntry@1010 : Record 337;
   
           ReservEntry2@1011 : Record 337;
   ...
   

   Existing code 2

   ...
           ReservEntry@1010 : Record 337;
   
           ReservEntry2@1011 : Record 337;
   
           Quantity2@1012 : Decimal;
   
   // Delete the following line.
         BEGIN
   // End of the deleted line.
   
           ReservEntry.SETCURRENTKEY(
   
             "Source ID","Source Ref. No.","Source Type","Source Subtype",
   
             "Source Batch Name","Source Prod. Order Line","Reservation Status");
   ...
   

   Replacement code 2

   ...
           ReservEntry@1010 : Record 337;
   
           ReservEntry2@1011 : Record 337;
   
           Quantity2@1012 : Decimal;
   
   // Add the following lines.
           QtyBaseResvdNotOnILE@1018 : Decimal;
   
           QtyResvdNotOnILE@1013 : Decimal;
   
           WhseManagement@1014 : Codeunit 5775;
   
           SrcDocQtyBaseToBeFilledByInvt@1015 : Decimal;
   
           SrcDocQtyToBeFilledByInvt@1016 : Decimal;
   
           QuantityBase2@1019 : Decimal;
   
         BEGIN
   
           ReservationExists := FALSE;
   
           ReservedForItemLedgEntry := FALSE;
   
           Quantity2 := Quantity;
   
           QuantityBase2 := QuantityBase;
   // End of the added lines.
   
           ReservEntry.SETCURRENTKEY(
   
             "Source ID","Source Ref. No.","Source Type","Source Subtype",
   
             "Source Batch Name","Source Prod. Order Line","Reservation Status"); 
   ...
   

   Existing code 3

   ...
           ReservEntry.SETRANGE("Reservation Status",ReservEntry."Reservation Status"::Reservation);
   
           IF ReservEntry.FIND('-') THEN BEGIN
   
             ReservationExists := TRUE;
   
   // Delete the following line.
             Quantity2 := Quantity;
   // End of the deleted line.
   
             Quantity := Quantity * QtyPerUnitofMeasure;
   
             REPEAT
   
               IF ReservEntry2.GET(ReservEntry."Entry No.",NOT ReservEntry.Positive) AND 
   ...
   

   Replacement code 3

   ...
             ReservEntry.SETRANGE("Reservation Status",ReservEntry."Reservation Status"::Reservation);
   
           IF ReservEntry.FIND('-') THEN BEGIN
   
             ReservationExists := TRUE;
   
             Quantity := Quantity * QtyPerUnitofMeasure;
   
             REPEAT
   
               IF ReservEntry2.GET(ReservEntry."Entry No.",NOT ReservEntry.Positive) AND 
   ...
   

   Existing code 4

   ...
              REPEAT
   
               IF ReservEntry2.GET(ReservEntry."Entry No.",NOT ReservEntry.Positive) AND
   
                  (ReservEntry2."Source Type" <> DATABASE::"Item Ledger Entry")
   
   // Delete the following lines.
               THEN
   
                 Quantity := Quantity - ReservEntry2."Quantity (Base)";
   
             UNTIL ReservEntry.NEXT = 0;
   
   
   
             IF Quantity <0 THEN
   
               Quantity := 0;
   
             Quantity := ROUND(Quantity / QtyPerUnitofMeasure,0.00001);
   
             IF Quantity = 0 THEN BEGIN
   // End of the deleted lines.
   
               GetLocation(LocationCode);
   
               IF Location."Always Create Pick Line" THEN BEGIN
   
                 ReservedForItemLedgEntry := FALSE;
   ...
   

   Replacement code 4

   ...
              REPEAT
   
               IF ReservEntry2.GET(ReservEntry."Entry No.",NOT ReservEntry.Positive) AND
   
                  (ReservEntry2."Source Type" <> DATABASE::"Item Ledger Entry")
   
   // Add the following lines.
               THEN BEGIN
   
                 QtyBaseResvdNotOnILE += ReservEntry2."Quantity (Base)";
   
                 QtyResvdNotOnILE += ReservEntry2.Quantity;
   
               END;
   
             UNTIL ReservEntry.NEXT = 0;
   
             WhseManagement.GetOutboundDocLineQtyOtsdg(SourceType,SourceSubType,
   
               SourceNo,SourceLineNo,SourceSubLineNo,SrcDocQtyToBeFilledByInvt,SrcDocQtyBaseToBeFilledByInvt);
   
             SrcDocQtyBaseToBeFilledByInvt := SrcDocQtyBaseToBeFilledByInvt - QtyBaseResvdNotOnILE;
   
             SrcDocQtyToBeFilledByInvt := SrcDocQtyToBeFilledByInvt - QtyResvdNotOnILE;
   
   
   
             IF QuantityBase >SrcDocQtyBaseToBeFilledByInvt THEN BEGIN
   
               QuantityBase := SrcDocQtyBaseToBeFilledByInvt;
   
               Quantity := SrcDocQtyToBeFilledByInvt;
   
             END;
   
   
   
             IF QuantityBase <=SrcDocQtyBaseToBeFilledByInvt THEN
   
               IF QuantityBase >QtyBaseAvailToPick THEN BEGIN
   
                 QuantityBase := QtyBaseAvailToPick;
   
                 Quantity := ROUND(QtyBaseAvailToPick / QtyPerUnitofMeasure,0.00001);
   
               END;
   
             IF QuantityBase = 0 THEN BEGIN
   // End of the added lines.
   
               GetLocation(LocationCode);
   
               IF Location."Always Create Pick Line" THEN BEGIN
   
                 ReservedForItemLedgEntry := FALSE;
   ...
   

   Existing code 5

   ...
               IF Location."Always Create Pick Line" THEN BEGIN
   
                 ReservedForItemLedgEntry := FALSE;
   
                 Quantity := Quantity2;
   
               END;
   
             END ELSE
   
               ReservedForItemLedgEntry := TRUE; 
   ...
   

   Replacement code 5

   ...
               IF Location."Always Create Pick Line" THEN BEGIN
   
                 ReservedForItemLedgEntry := FALSE;
   
                 Quantity := Quantity2;
   
   // Add the following line.
                 QuantityBase := QuantityBase2;
   // End of the added line.
   
               END;
   
             END ELSE
   
               ReservedForItemLedgEntry := TRUE; 
   ...
   

7. Change the code in the Documentation function in the Create Pick codeunit (7312) as follows:
   

   Existing code

   ...
            EXIT(xReservedQty > Item."Reserved Qty. on Inventory");
   
         END;
   
   // Delete the following line.    
         BEGIN
   // End of the deleted line.
   
         END.
   
       }
   
     }
   ...
   

   Replacement code

   ...
          EXIT(xReservedQty >Item."Reserved Qty. on Inventory");
   
         END;
   
   
   
   // Add the following lines.
         PROCEDURE CalcTotalQtyAssgndOnWhse@1102601005(LocationCode@1002 : Code[10];ItemNo@1003 : Code[20];VariantCode@1004 : Code[10]) : Decimal;
   
         VAR
   
           WhseShipmentLine@1010 : Record 7321;
   
           ProdOrderComp@1011 : Record 5407;
   
           QtyAssgndToWhseAct@1012 : Decimal;
   
           QtyAssgndToShipment@1013 : Decimal;
   
           QtyAssgndToProdComp@1014 : Decimal;
   
         BEGIN
   
           QtyAssgndToWhseAct +=
   
             CalcTotalQtyAssgndOnWhseAct(TempWhseActivLine."Activity Type"::" ",LocationCode,ItemNo,VariantCode);
   
           QtyAssgndToWhseAct +=
   
             CalcTotalQtyAssgndOnWhseAct(TempWhseActivLine."Activity Type"::"Put-away",LocationCode,ItemNo,VariantCode);
   
           QtyAssgndToWhseAct +=
   
             CalcTotalQtyAssgndOnWhseAct(TempWhseActivLine."Activity Type"::Pick,LocationCode,ItemNo,VariantCode);
   
           QtyAssgndToWhseAct +=
   
             CalcTotalQtyAssgndOnWhseAct(TempWhseActivLine."Activity Type"::Movement,LocationCode,ItemNo,VariantCode);
   
           QtyAssgndToWhseAct +=
   
             CalcTotalQtyAssgndOnWhseAct(TempWhseActivLine."Activity Type"::"Invt. Put-away",LocationCode,ItemNo,VariantCode);
   
           QtyAssgndToWhseAct +=
   
             CalcTotalQtyAssgndOnWhseAct(TempWhseActivLine."Activity Type"::"Invt. Pick",LocationCode,ItemNo,VariantCode);
   
   
   
           WITH WhseShipmentLine DO BEGIN
   
             SETCURRENTKEY("Item No.","Location Code","Variant Code","Due Date");
   
             SETRANGE("Location Code",LocationCode);
   
             SETRANGE("Item No.",ItemNo);
   
             SETRANGE("Variant Code",VariantCode);
   
             CALCSUMS("Qty. Picked (Base)");
   
             QtyAssgndToShipment := "Qty. Picked (Base)";
   
           END;
   
   
   
           WITH ProdOrderComp DO BEGIN
   
             SETCURRENTKEY("Item No.","Variant Code","Location Code",Status,"Due Date");
   
             SETRANGE("Location Code",LocationCode);
   
             SETRANGE("Item No.",ItemNo);
   
             SETRANGE("Variant Code",VariantCode);
   
             CALCSUMS("Qty. Picked (Base)");
   
             QtyAssgndToProdComp := "Qty. Picked (Base)";
   
           END;
   
   
   
           EXIT(QtyAssgndToWhseAct + QtyAssgndToShipment + QtyAssgndToProdComp);
   
         END;
   
   
   
         PROCEDURE CalcTotalQtyAssgndOnWhseAct@1102601006(ActivityType@1003 : Option;LocationCode@1004 : Code[10];ItemNo@1005 : Code[20];VariantCode@1006 : Code[10]) : Decimal;
   
         VAR
   
           WhseActivLine@1002 : Record 5767;
   
         BEGIN
   
           WITH WhseActivLine DO BEGIN
   
             SETCURRENTKEY(
   
               "Item No.","Location Code","Activity Type","Bin Type Code",
   
               "Unit of Measure Code","Variant Code","Breakbulk No.","Action Type");
   
             SETRANGE("Location Code",LocationCode);
   
             SETRANGE("Item No.",ItemNo);
   
             SETRANGE("Variant Code",VariantCode);
   
             SETRANGE("Activity Type",ActivityType);
   
             SETRANGE("Breakbulk No.",0);
   
             SETFILTER("Action Type",'%1|%2',"Action Type"::" ","Action Type"::Take);
   
             CALCSUMS("Qty. Outstanding (Base)");
   
             EXIT("Qty. Outstanding (Base)");
   
           END;
   
         END;
   
   
   
         PROCEDURE CalcTotalQtyOnBinType@1102601007(BinTypeFilter@1004 : Text[1024];LocationCode@1003 : Code[10];ItemNo@1002 : Code[10];VariantCode@1001 : Code[10]) : Decimal;
   
         VAR
   
           WhseEntry@1000 : Record 7312;
   
         BEGIN
   
           WITH WhseEntry DO BEGIN
   
             SETCURRENTKEY("Item No.","Location Code","Variant Code","Bin Type Code");
   
             SETRANGE("Item No.",ItemNo);
   
             SETRANGE("Location Code",LocationCode);
   
             SETRANGE("Variant Code",VariantCode);
   
            IF BinTypeFilter <>'' THEN
   
               SETFILTER("Bin Type Code",BinTypeFilter);
   
             CALCSUMS("Qty. (Base)");
   
             EXIT("Qty. (Base)");
   
           END;
   
         END;
   // End of the added lines.
   
       }
   
     }  
   ...