This article applies to Microsoft for the following countries and language locales.

  • English (Canada) (en-ca)

  • English (United States) (en-us)

  • Spanish (Mexico) (es-mx)

  • French (Canada) (fr-ca)

Symptoms

Assume that you set CAD as the Additional Reporting Currency value in the General Ledger Setup dialog box in the North American version of Microsoft Dynamics NAV 2009. When you post a purchase invoice that contains tax, you receive the following error message:

The transaction cannot be completed because it will cause inconsistencies in the G/L Entry table. Check where and how the CONSISTENT function is used in the transaction to find the reason for the error.

This problem occurs in the following products:

  • The North American version of Microsoft Dynamics NAV 2009 R2

  • The North American version of Microsoft Dynamics NAV 2009 Service Pack 1

Resolution

Hotfix information

A supported hotfix is now available from Microsoft. However, it is only intended to correct the problem that is described in this article. Apply it only to systems that are experiencing this specific problem. This hotfix may receive additional testing. Therefore, if you are not severely affected by this problem, we recommend that you wait for the next Microsoft Dynamics NAV 2009 service pack or the next Microsoft Dynamics NAV version that contains this hotfix. Note In special cases, charges that are ordinarily incurred for support calls may be canceled if a Technical Support Professional for Microsoft Dynamics and related products determines that a specific update will resolve your problem. The usual support costs will apply to additional support questions and issues that do not qualify for the specific update in question.

Installation information

Microsoft provides programming examples for illustration only, without warranty either expressed or implied. This includes, but is not limited to, the implied warranties of merchantability or fitness for a particular purpose. This article assumes that you are familiar with the programming language that is being demonstrated and with the tools that are used to create and to debug procedures. Microsoft support engineers can help explain the functionality of a particular procedure, but they will not modify these examples to provide added functionality or construct procedures to meet your specific requirements.Note Before you install this hotfix, verify that all Microsoft Navision client users are logged off the system. This includes Microsoft Navision Application Services (NAS) client users. You should be the only client user who is logged on when you implement this hotfix.To implement this hotfix, you must have a developer license.We recommend that the user account in the Windows Logins window or in the Database Logins window be assigned the "SUPER" role ID. If the user account cannot be assigned the "SUPER" role ID, you must verify that the user account has the following permissions:

  • The Modify permission for the object that you will be changing.

  • The Execute permission for the System Object ID 5210 object and for the System Object ID 9015 object.

Note You do not have to have rights to the data stores unless you have to perform data repair.

Code changes

Note Always test code fixes in a controlled environment before you apply the fixes to your production computers. To resolve this problem, follow these steps:

  1. Change the code in Fields in the Sales Tax Amount Line table (10011) as follows:Existing code

    ...ESM=Es Informe jurisdicci¢n;                                                                FRC=Est une juridiction fiscale;                                                                ENC=Is Report-to Jurisdiction];                                                     Editable=No }    }    KEYS    {      {    ;Tax Area Code for Key,Tax Jurisdiction Code,Tax %,Tax Group Code,Expense/Capitalize,Tax Type,Use Tax;...

    Replacement code

    ...ESM=Es Informe jurisdicci¢n;                                                                FRC=Est une juridiction fiscale;                                                                ENC=Is Report-to Jurisdiction];                                                     Editable=No }// Add the following line.{ 10044;  ;Tax Base Amount FCY ;Decimal        }// End of the added line.    }    KEYS    {      {    ;Tax Area Code for Key,Tax Jurisdiction Code,Tax %,Tax Group Code,Expense/Capitalize,Tax Type,Use Tax;...
  2. Change the code in the PostSalesTaxToGL function in the Sales-Post Codeunit (80) as follows:Existing code

    ...END;              GenJnlLine."Tax Jurisdiction Code" := TempSalesTaxAmtLine."Tax Jurisdiction Code";              IF TempSalesTaxAmtLine."Tax Amount" <> 0 THEN BEGIN                RemSalesTaxSrcAmt := RemSalesTaxSrcAmt +// Delete the following lines.                  CurrExchRate.ExchangeAmtLCYToFCY(                    UseDate,SalesHeader."Currency Code",TempSalesTaxAmtLine."Tax Amount",SalesHeader."Currency Factor");// End of the deleted lines.                GenJnlLine."Source Curr. VAT Amount" :=                  SalesTaxCalculate.ArithmeticRound(RemSalesTaxSrcAmt,Currency."Amount Rounding Precision");                RemSalesTaxSrcAmt := RemSalesTaxSrcAmt - GenJnlLine."Source Curr. VAT Amount";                RemSalesTaxAmt := RemSalesTaxAmt + TempSalesTaxAmtLine."Tax Amount";...

    Replacement code

    ...END;              GenJnlLine."Tax Jurisdiction Code" := TempSalesTaxAmtLine."Tax Jurisdiction Code";              IF TempSalesTaxAmtLine."Tax Amount" <> 0 THEN BEGIN                RemSalesTaxSrcAmt := RemSalesTaxSrcAmt +// Add the following lines.                  TempSalesTaxAmtLine."Tax Base Amount FCY" * TempSalesTaxAmtLine."Tax %" / 100;// End of the added lines.                GenJnlLine."Source Curr. VAT Amount" :=                  SalesTaxCalculate.ArithmeticRound(RemSalesTaxSrcAmt,Currency."Amount Rounding Precision");                RemSalesTaxSrcAmt := RemSalesTaxSrcAmt - GenJnlLine."Source Curr. VAT Amount";                RemSalesTaxAmt := RemSalesTaxAmt + TempSalesTaxAmtLine."Tax Amount";...
  3. Change the code in the PostSalesTaxToGL function in the Purch.-Post Codeunit (90) as follows:Existing code

    ...END;              GenJnlLine."Tax Jurisdiction Code" := TempSalesTaxAmtLine."Tax Jurisdiction Code";              IF TempSalesTaxAmtLine."Tax Amount" <> 0 THEN BEGIN                RemSalesTaxSrcAmt := RemSalesTaxSrcAmt +// Delete the following lines.                  CurrExchRate.ExchangeAmtLCYToFCY(                    Usedate,PurchHeader."Currency Code",TempSalesTaxAmtLine."Tax Amount",PurchHeader."Currency Factor");// End of the deleted lines.                GenJnlLine."Source Curr. VAT Amount" :=                  SalesTaxCalculate.ArithmeticRound(RemSalesTaxSrcAmt,Currency."Amount Rounding Precision");                RemSalesTaxSrcAmt := RemSalesTaxSrcAmt - GenJnlLine."Source Curr. VAT Amount";                RemSalesTaxAmt := RemSalesTaxAmt + TempSalesTaxAmtLine."Tax Amount";...

    Replacement code

    ...END;              GenJnlLine."Tax Jurisdiction Code" := TempSalesTaxAmtLine."Tax Jurisdiction Code";              IF TempSalesTaxAmtLine."Tax Amount" <> 0 THEN BEGIN                RemSalesTaxSrcAmt := RemSalesTaxSrcAmt +// Add the following line.                  TempSalesTaxAmtLine."Tax Base Amount FCY" * TempSalesTaxAmtLine."Tax %" / 100;// End of the added line.                GenJnlLine."Source Curr. VAT Amount" :=                  SalesTaxCalculate.ArithmeticRound(RemSalesTaxSrcAmt,Currency."Amount Rounding Precision");                RemSalesTaxSrcAmt := RemSalesTaxSrcAmt - GenJnlLine."Source Curr. VAT Amount";                RemSalesTaxAmt := RemSalesTaxAmt + TempSalesTaxAmtLine."Tax Amount";...
  4. Change the code in the PostProvincialSalesTaxToGL function in the Purch.-Post Codeunit (90) as follows:Existing code

    ...TaxJurisdiction.TESTFIELD("Tax Account (Purchases)");                  GenJnlLine."Account No." := TaxJurisdiction."Tax Account (Purchases)";                END;                GenJnlLine.Amount := GenJnlLine."VAT Amount";// Delete the following lines.                GenJnlLine."Source Curr. VAT Base Amount" := 0;                GenJnlLine."VAT Base Amount (LCY)" := 0;                GenJnlLine."VAT Base Amount" := 0;                GenJnlLine."Source Curr. VAT Amount" := 0;// End of the deleted lines.                GenJnlLine."VAT Amount (LCY)" := 0;                GenJnlLine."VAT Amount" := 0;                GenJnlLine.Quantity := 0;                GenJnlLine."VAT Difference" := 0;...

    Replacement code

    ...TaxJurisdiction.TESTFIELD("Tax Account (Purchases)");                  GenJnlLine."Account No." := TaxJurisdiction."Tax Account (Purchases)";                END;                GenJnlLine.Amount := GenJnlLine."VAT Amount";// Add the following lines.                GenJnlLine."Source Currency Amount" := GenJnlLine."Source Curr. VAT Amount";                GenJnlLine."Source Curr. VAT Base Amount" := 0;                GenJnlLine."VAT Base Amount (LCY)" := 0;                GenJnlLine."VAT Base Amount" := 0;// End of the added lines.                GenJnlLine."VAT Amount (LCY)" := 0;                GenJnlLine."VAT Amount" := 0;                GenJnlLine.Quantity := 0;                GenJnlLine."VAT Difference" := 0;...
  5. Change the code in the AddSalesLine function in the Sales Tax Calculate Codeunit (398) as follows:Existing code 1

    ..."Round Tax" := TaxArea."Round Tax";                TaxJurisdiction.GET("Tax Jurisdiction Code");                "Is Report-to Jurisdiction" := ("Tax Jurisdiction Code" = TaxJurisdiction."Report-to Jurisdiction");              END;// Delete the following line.              "Tax Base Amount" := (SalesLine."Line Amount" - SalesLine."Inv. Discount Amount") / ExchangeFactor;// End of the deleted line.              "Line Amount" := SalesLine."Line Amount" / ExchangeFactor;              "Tax Liable" := SalesLine."Tax Liable";              Quantity := SalesLine."Quantity (Base)";              "Invoice Discount Amount" := SalesLine."Inv. Discount Amount";...

    Replacement code 1

    ..."Round Tax" := TaxArea."Round Tax";                TaxJurisdiction.GET("Tax Jurisdiction Code");                "Is Report-to Jurisdiction" := ("Tax Jurisdiction Code" = TaxJurisdiction."Report-to Jurisdiction");              END;// Add the following line.              SetTaxBaseAmount(TempSalesTaxLine,SalesLine."Line Amount" - SalesLine."Inv. Discount Amount",ExchangeFactor,FALSE);// End of the added line.              "Line Amount" := SalesLine."Line Amount" / ExchangeFactor;              "Tax Liable" := SalesLine."Tax Liable";              Quantity := SalesLine."Quantity (Base)";              "Invoice Discount Amount" := SalesLine."Inv. Discount Amount";...

    Existing code 2

    ...END ELSE BEGIN              "Line Amount" := "Line Amount" + (SalesLine."Line Amount" / ExchangeFactor);              IF SalesLine."Tax Liable" THEN                "Tax Liable" := SalesLine."Tax Liable";// Delete the following line.              "Tax Base Amount" := "Tax Base Amount" + ((SalesLine."Line Amount" - SalesLine."Inv. Discount Amount") / ExchangeFactor);// End of the deleted line.              "Tax Amount" := 0;              Quantity := Quantity + SalesLine."Quantity (Base)";              "Invoice Discount Amount" := "Invoice Discount Amount" + SalesLine."Inv. Discount Amount";              MODIFY;...

    Replacement code 2

    ...END ELSE BEGIN              "Line Amount" := "Line Amount" + (SalesLine."Line Amount" / ExchangeFactor);              IF SalesLine."Tax Liable" THEN                "Tax Liable" := SalesLine."Tax Liable";// Add the following line.              SetTaxBaseAmount(TempSalesTaxLine,SalesLine."Line Amount" - SalesLine."Inv. Discount Amount",ExchangeFactor,TRUE);// End of the added line.              "Tax Amount" := 0;              Quantity := Quantity + SalesLine."Quantity (Base)";              "Invoice Discount Amount" := "Invoice Discount Amount" + SalesLine."Inv. Discount Amount";              MODIFY;...
  6. Change the code in the AddSalesInvoiceLines function in the Sales Tax Calculate Codeunit (398) as follows:Existing code 1

    ..."Is Report-to Jurisdiction" :=                         ("Tax Jurisdiction Code" = TaxJurisdiction."Report-to Jurisdiction");                     END;                     "Line Amount" := SalesInvoiceLine."Line Amount" / ExchangeFactor;// Delete the following line.                     "Tax Base Amount" := SalesInvoiceLine."VAT Base Amount" / ExchangeFactor;// End of the deleted line.                     Quantity := SalesInvoiceLine.Quantity;                     "Tax Liable" := SalesInvoiceLine."Tax Liable";                     "Calculation Order" :=  TaxAreaLine."Calculation Order";                     InsertRec := TRUE;...

    Replacement code 1

    ..."Is Report-to Jurisdiction" :=                         ("Tax Jurisdiction Code" = TaxJurisdiction."Report-to Jurisdiction");                     END;                     "Line Amount" := SalesInvoiceLine."Line Amount" / ExchangeFactor;// Add the following line.                     SetTaxBaseAmount(TempSalesTaxLine,SalesInvoiceLine."VAT Base Amount",ExchangeFactor,FALSE);// End of the added line.                     Quantity := SalesInvoiceLine.Quantity;                     "Tax Liable" := SalesInvoiceLine."Tax Liable";                     "Calculation Order" :=  TaxAreaLine."Calculation Order";                     InsertRec := TRUE;...

    Existing code 2

    ...InsertRec := TRUE;                     INSERT;                   END ELSE BEGIN                     "Line Amount" := "Line Amount" + (SalesInvoiceLine."Line Amount" / ExchangeFactor);// Delete the following line.                     "Tax Base Amount" := "Tax Base Amount" + (SalesInvoiceLine."VAT Base Amount" / ExchangeFactor);// End of the deleted line.                     Quantity := Quantity + SalesInvoiceLine.Quantity;                     IF SalesInvoiceLine."Tax Liable" THEN                       "Tax Liable" := SalesInvoiceLine."Tax Liable";                     InsertRec := FALSE;...

    Replacement code 2

    ...InsertRec := TRUE;                     INSERT;                   END ELSE BEGIN                     "Line Amount" := "Line Amount" + (SalesInvoiceLine."Line Amount" / ExchangeFactor);// Add the following line.                     SetTaxBaseAmount(TempSalesTaxLine,SalesInvoiceLine."VAT Base Amount",ExchangeFactor,TRUE);// End of the added line.                     Quantity := Quantity + SalesInvoiceLine.Quantity;                     IF SalesInvoiceLine."Tax Liable" THEN                       "Tax Liable" := SalesInvoiceLine."Tax Liable";                     InsertRec := FALSE;...
  7. Change the code in the AddSalesCrMemoLines function in the Sales Tax Calculate Codeunit (398) as follows:Existing code 1

    ..."Is Report-to Jurisdiction" :=                         ("Tax Jurisdiction Code" = TaxJurisdiction."Report-to Jurisdiction");                     END;                     "Line Amount" := SalesCrMemoLine."Line Amount" / ExchangeFactor;// Delete the following line.                     "Tax Base Amount" := SalesCrMemoLine."VAT Base Amount" / ExchangeFactor;// End of the deleted line.                     Quantity := SalesCrMemoLine.Quantity;                     "Tax Liable" := SalesCrMemoLine."Tax Liable";                     "Calculation Order" :=  TaxAreaLine."Calculation Order";                     InsertRec := TRUE;...

    Replacement code 1

    ..."Is Report-to Jurisdiction" :=                         ("Tax Jurisdiction Code" = TaxJurisdiction."Report-to Jurisdiction");                     END;                     "Line Amount" := SalesCrMemoLine."Line Amount" / ExchangeFactor;// Add the following line.                     SetTaxBaseAmount(TempSalesTaxLine,SalesCrMemoLine."VAT Base Amount",ExchangeFactor,FALSE);// End of the added line.                     Quantity := SalesCrMemoLine.Quantity;                     "Tax Liable" := SalesCrMemoLine."Tax Liable";                     "Calculation Order" :=  TaxAreaLine."Calculation Order";                     InsertRec := TRUE;...

    Existing code 2

    ...InsertRec := TRUE;                     INSERT;                   END ELSE BEGIN                     "Line Amount" := "Line Amount" + (SalesCrMemoLine."Line Amount" / ExchangeFactor);// Delete the following line.                     "Tax Base Amount" := "Tax Base Amount" + (SalesCrMemoLine."VAT Base Amount" / ExchangeFactor);// End of the deleted line.                     Quantity := Quantity + SalesCrMemoLine.Quantity;                     IF SalesCrMemoLine."Tax Liable" THEN                       "Tax Liable" := SalesCrMemoLine."Tax Liable";                     InsertRec := FALSE;...

    Replacement code 2

    ...InsertRec := TRUE;                     INSERT;                   END ELSE BEGIN                     "Line Amount" := "Line Amount" + (SalesCrMemoLine."Line Amount" / ExchangeFactor);// Add the following line.                     SetTaxBaseAmount(TempSalesTaxLine,SalesCrMemoLine."VAT Base Amount",ExchangeFactor,TRUE);// End of the added line.                     Quantity := Quantity + SalesCrMemoLine.Quantity;                     IF SalesCrMemoLine."Tax Liable" THEN                       "Tax Liable" := SalesCrMemoLine."Tax Liable";                     InsertRec := FALSE;...
  8. Change the code in the AddPurchLine function in the Sales Tax Calculate Codeunit (398) as follows:Existing code 1

    ..."Round Tax" := TaxArea."Round Tax";                TaxJurisdiction.GET("Tax Jurisdiction Code");                "Is Report-to Jurisdiction" := ("Tax Jurisdiction Code" = TaxJurisdiction."Report-to Jurisdiction");              END;// Delete the following line.              "Tax Base Amount" := (PurchLine."Line Amount" - PurchLine."Inv. Discount Amount") / ExchangeFactor;// End of the deleted line.              "Line Amount" := PurchLine."Line Amount" / ExchangeFactor;              "Tax Liable" := PurchLine."Tax Liable";              "Use Tax" := PurchLine."Use Tax";...

    Replacement code 1

    ..."Round Tax" := TaxArea."Round Tax";                TaxJurisdiction.GET("Tax Jurisdiction Code");                "Is Report-to Jurisdiction" := ("Tax Jurisdiction Code" = TaxJurisdiction."Report-to Jurisdiction");              END;// Add the following line.              SetTaxBaseAmount(TempSalesTaxLine,PurchLine."Line Amount" - PurchLine."Inv. Discount Amount",ExchangeFactor,FALSE);// End of the added line.          "Line Amount" := PurchLine."Line Amount" / ExchangeFactor;              "Tax Liable" := PurchLine."Tax Liable";              "Use Tax" := PurchLine."Use Tax";...

    Existing code 2

    ...END ELSE BEGIN              "Line Amount" := "Line Amount" + (PurchLine."Line Amount" / ExchangeFactor);              IF PurchLine."Tax Liable" THEN                "Tax Liable" := PurchLine."Tax Liable";// Delete the following line.              "Tax Base Amount" := "Tax Base Amount" + ((PurchLine."Line Amount" - PurchLine."Inv. Discount Amount") / ExchangeFactor);// End of the deleted line.              "Tax Amount" := 0;              Quantity := Quantity + PurchLine."Quantity (Base)";              "Invoice Discount Amount" := "Invoice Discount Amount" + PurchLine."Inv. Discount Amount";              MODIFY;...

    Replacement code 2

    ...END ELSE BEGIN              "Line Amount" := "Line Amount" + (PurchLine."Line Amount" / ExchangeFactor);              IF PurchLine."Tax Liable" THEN                "Tax Liable" := PurchLine."Tax Liable";// Add the following line.              SetTaxBaseAmount(TempSalesTaxLine,PurchLine."Line Amount" - PurchLine."Inv. Discount Amount",ExchangeFactor,TRUE);// End of the added line.              "Tax Amount" := 0;              Quantity := Quantity + PurchLine."Quantity (Base)";              "Invoice Discount Amount" := "Invoice Discount Amount" + PurchLine."Inv. Discount Amount";              MODIFY;...
  9. Change the code in the AddPurchInvoiceLines function in the Sales Tax Calculate Codeunit (398) as follows:Existing code 1

    ..."Is Report-to Jurisdiction" :=                         ("Tax Jurisdiction Code" = TaxJurisdiction."Report-to Jurisdiction");                     END;                     "Line Amount" := PurchInvLine."Line Amount" / ExchangeFactor;// Delete the following line.                     "Tax Base Amount" := PurchInvLine."VAT Base Amount" / ExchangeFactor;// End of the deleted line.                     Quantity := PurchInvLine.Quantity;                     "Tax Liable" := PurchInvLine."Tax Liable";                     "Use Tax" := PurchInvLine."Use Tax";...

    Replacement code 1

    ..."Is Report-to Jurisdiction" :=                         ("Tax Jurisdiction Code" = TaxJurisdiction."Report-to Jurisdiction");                     END;                     "Line Amount" := PurchInvLine."Line Amount" / ExchangeFactor;// Add the following line.                     SetTaxBaseAmount(TempSalesTaxLine,PurchInvLine."VAT Base Amount",ExchangeFactor,FALSE);// End of the added line.                     Quantity := PurchInvLine.Quantity;                     "Tax Liable" := PurchInvLine."Tax Liable";                     "Use Tax" := PurchInvLine."Use Tax";...

    Existing code 2

    ...InsertRec := TRUE;                     INSERT;                   END ELSE BEGIN                     "Line Amount" := "Line Amount" + (PurchInvLine."Line Amount" / ExchangeFactor);// Delete the following line.                     "Tax Base Amount" := "Tax Base Amount" + (PurchInvLine."VAT Base Amount" / ExchangeFactor);// End of the deleted line.                     Quantity := Quantity + PurchInvLine.Quantity;                     IF PurchInvLine."Tax Liable" THEN                       "Tax Liable" := PurchInvLine."Tax Liable";                     InsertRec := FALSE;...

    Replacement code 2

    ...InsertRec := TRUE;                     INSERT;                   END ELSE BEGIN                     "Line Amount" := "Line Amount" + (PurchInvLine."Line Amount" / ExchangeFactor);// Add the following line.                     SetTaxBaseAmount(TempSalesTaxLine,PurchInvLine."VAT Base Amount",ExchangeFactor,TRUE);// End of the added line.                     Quantity := Quantity + PurchInvLine.Quantity;                     IF PurchInvLine."Tax Liable" THEN                       "Tax Liable" := PurchInvLine."Tax Liable";                     InsertRec := FALSE;...
  10. Change the code in the AddPurchCrMemoLines function in the Sales Tax Calculate Codeunit (398) as follows:Existing code 1

    ..."Is Report-to Jurisdiction" :=                         ("Tax Jurisdiction Code" = TaxJurisdiction."Report-to Jurisdiction");                     END;                     "Line Amount" := PurchCrMemoLine."Line Amount" / ExchangeFactor;// Delete the following line.                     "Tax Base Amount" := PurchCrMemoLine."VAT Base Amount" / ExchangeFactor;// End of the deleted line.                     Quantity := PurchCrMemoLine.Quantity;                     "Tax Liable" := PurchCrMemoLine."Tax Liable";                     "Use Tax" := PurchCrMemoLine."Use Tax";...

    Replacement code 1

    ..."Is Report-to Jurisdiction" :=                         ("Tax Jurisdiction Code" = TaxJurisdiction."Report-to Jurisdiction");                     END;                     "Line Amount" := PurchCrMemoLine."Line Amount" / ExchangeFactor;// Add the following line.                     SetTaxBaseAmount(TempSalesTaxLine,PurchCrMemoLine."VAT Base Amount",ExchangeFactor,FALSE);// End of the added line.                     Quantity := PurchCrMemoLine.Quantity;                     "Tax Liable" := PurchCrMemoLine."Tax Liable";                     "Use Tax" := PurchCrMemoLine."Use Tax";...

    Existing code 2

    ...InsertRec := TRUE;                     INSERT;                   END ELSE BEGIN                     "Line Amount" := "Line Amount" + (PurchCrMemoLine."Line Amount" / ExchangeFactor);// Delete the following line.                     "Tax Base Amount" := "Tax Base Amount" + (PurchCrMemoLine."VAT Base Amount" / ExchangeFactor);// End of the deleted line.                     Quantity := Quantity + PurchCrMemoLine.Quantity;                     IF PurchCrMemoLine."Tax Liable" THEN                       "Tax Liable" := PurchCrMemoLine."Tax Liable";                     InsertRec := FALSE;...

    Replacement code 2

    ...InsertRec := TRUE;                     INSERT;                   END ELSE BEGIN                     "Line Amount" := "Line Amount" + (PurchCrMemoLine."Line Amount" / ExchangeFactor);// Add the following line.                     SetTaxBaseAmount(TempSalesTaxLine,PurchCrMemoLine."VAT Base Amount",ExchangeFactor,TRUE);// End of the added line.                     Quantity := Quantity + PurchCrMemoLine.Quantity;                     IF PurchCrMemoLine."Tax Liable" THEN                       "Tax Liable" := PurchCrMemoLine."Tax Liable";                     InsertRec := FALSE;...
  11. Change the code in the AddServiceLine function in the Sales Tax Calculate Codeunit (398) as follows:Existing code 1

    ..."Round Tax" := TaxArea."Round Tax";                TaxJurisdiction.GET("Tax Jurisdiction Code");                "Is Report-to Jurisdiction" := ("Tax Jurisdiction Code" = TaxJurisdiction."Report-to Jurisdiction");              END;// Delete the following line.              "Tax Base Amount" := (ServiceLine."Line Amount" - ServiceLine."Inv. Discount Amount") / ExchangeFactor;// End of the deleted line.              "Line Amount" := ServiceLine."Line Amount" / ExchangeFactor;              "Tax Liable" := ServiceLine."Tax Liable";              Quantity := ServiceLine."Quantity (Base)";              "Invoice Discount Amount" := ServiceLine."Inv. Discount Amount";...

    Replacement code 1

    ..."Round Tax" := TaxArea."Round Tax";                TaxJurisdiction.GET("Tax Jurisdiction Code");                "Is Report-to Jurisdiction" := ("Tax Jurisdiction Code" = TaxJurisdiction."Report-to Jurisdiction");              END;// Add the following line.              SetTaxBaseAmount(TempSalesTaxLine,ServiceLine."Line Amount" - ServiceLine."Inv. Discount Amount",ExchangeFactor,FALSE);// End of the added line.              "Line Amount" := ServiceLine."Line Amount" / ExchangeFactor;              "Tax Liable" := ServiceLine."Tax Liable";              Quantity := ServiceLine."Quantity (Base)";              "Invoice Discount Amount" := ServiceLine."Inv. Discount Amount";...

    Existing code 2

    ...END ELSE BEGIN              "Line Amount" := "Line Amount" + (ServiceLine."Line Amount" / ExchangeFactor);              IF ServiceLine."Tax Liable" THEN                "Tax Liable" := ServiceLine."Tax Liable";// Delete the following line.              "Tax Base Amount" :=                "Tax Base Amount" + ((ServiceLine."Line Amount" - ServiceLine."Inv. Discount Amount") / ExchangeFactor);// End of the deleted line.          "Tax Amount" := 0;              Quantity := Quantity + ServiceLine."Quantity (Base)";              "Invoice Discount Amount" := "Invoice Discount Amount" + ServiceLine."Inv. Discount Amount";              MODIFY;...

    Replacement code 2

    ...END ELSE BEGIN              "Line Amount" := "Line Amount" + (ServiceLine."Line Amount" / ExchangeFactor);              IF ServiceLine."Tax Liable" THEN                "Tax Liable" := ServiceLine."Tax Liable";// Add the following line.              SetTaxBaseAmount(TempSalesTaxLine,ServiceLine."Line Amount" - ServiceLine."Inv. Discount Amount",ExchangeFactor,TRUE);// End of the added line.              "Tax Amount" := 0;              Quantity := Quantity + ServiceLine."Quantity (Base)";              "Invoice Discount Amount" := "Invoice Discount Amount" + ServiceLine."Inv. Discount Amount";              MODIFY;...
  12. Change the code in the AddServInvoiceLines function in the Sales Tax Calculate Codeunit (398) as follows:Existing code 1

    ..."Is Report-to Jurisdiction" :=                         ("Tax Jurisdiction Code" = TaxJurisdiction."Report-to Jurisdiction");                     END;                     "Line Amount" := ServInvLine."Line Amount" / ExchangeFactor;// Delete the following lines.                     "Tax Base Amount" := ServInvLine."VAT Base Amount" / ExchangeFactor;                     Quantity := ServInvLine.Quantity;                     "Tax Liable" := ServInvLine."Tax Liable";// End of the deleted line.                     "Calculation Order" :=  TaxAreaLine."Calculation Order";                     InsertRec := TRUE;                     INSERT;...

    Replacement code 1

    ..."Is Report-to Jurisdiction" :=                         ("Tax Jurisdiction Code" = TaxJurisdiction."Report-to Jurisdiction");                     END;                     "Line Amount" := ServInvLine."Line Amount" / ExchangeFactor;// Add the following lines.                     SetTaxBaseAmount(TempSalesTaxLine,ServInvLine."VAT Base Amount",ExchangeFactor,FALSE);                     Quantity := ServInvLine.Quantity;                     "Tax Liable" := ServInvLine."Tax Liable";// End of the added lines.                     "Calculation Order" :=  TaxAreaLine."Calculation Order";                     InsertRec := TRUE;                     INSERT;...

    Existing code 2

    ...InsertRec := TRUE;                     INSERT;                   END ELSE BEGIN                     "Line Amount" := "Line Amount" + (ServInvLine."Line Amount" / ExchangeFactor);// Delete the following line.                     "Tax Base Amount" := "Tax Base Amount" + (ServInvLine."VAT Base Amount" / ExchangeFactor);// End of the deleted line.                     Quantity := Quantity + ServInvLine.Quantity;                     IF ServInvLine."Tax Liable" THEN                       "Tax Liable" := ServInvLine."Tax Liable";                     InsertRec := FALSE;...

    Replacement code 2

    ...InsertRec := TRUE;                     INSERT;                   END ELSE BEGIN                     "Line Amount" := "Line Amount" + (ServInvLine."Line Amount" / ExchangeFactor);// Add the following line.                     SetTaxBaseAmount(TempSalesTaxLine,ServInvLine."VAT Base Amount",ExchangeFactor,TRUE);// End of the added line.                     Quantity := Quantity + ServInvLine.Quantity;                     IF ServInvLine."Tax Liable" THEN                       "Tax Liable" := ServInvLine."Tax Liable";                     InsertRec := FALSE;...
  13. Change the code in the AddServCrMemoLines function in the Sales Tax Calculate Codeunit (398) as follows:Existing code 1

    ..."Is Report-to Jurisdiction" :=                         ("Tax Jurisdiction Code" = TaxJurisdiction."Report-to Jurisdiction");                     END;                     "Line Amount" := ServCrMemoLine."Line Amount" / ExchangeFactor;// Delete the following line.                     "Tax Base Amount" := ServCrMemoLine."VAT Base Amount" / ExchangeFactor;// End of the deleted line.                     Quantity := ServCrMemoLine.Quantity;                     "Tax Liable" := ServCrMemoLine."Tax Liable";                     "Calculation Order" :=  TaxAreaLine."Calculation Order";...

    Replacement code 1

    ..."Is Report-to Jurisdiction" :=                         ("Tax Jurisdiction Code" = TaxJurisdiction."Report-to Jurisdiction");                     END;                     "Line Amount" := ServCrMemoLine."Line Amount" / ExchangeFactor;// Add the following line.                     SetTaxBaseAmount(TempSalesTaxLine,ServCrMemoLine."VAT Base Amount",ExchangeFactor,FALSE);// End of the added line.                     Quantity := ServCrMemoLine.Quantity;                     "Tax Liable" := ServCrMemoLine."Tax Liable";                     "Calculation Order" :=  TaxAreaLine."Calculation Order";...

    Existing code 2

    ...InsertRec := TRUE;                     INSERT;                   END ELSE BEGIN                     "Line Amount" := "Line Amount" + (ServCrMemoLine."Line Amount" / ExchangeFactor);// Delete the following line.                     "Tax Base Amount" := "Tax Base Amount" + (ServCrMemoLine."VAT Base Amount" / ExchangeFactor);// End of the deleted line.                     Quantity := Quantity + ServCrMemoLine.Quantity;                     IF ServCrMemoLine."Tax Liable" THEN                       "Tax Liable" := ServCrMemoLine."Tax Liable";                     InsertRec := FALSE;...

    Replacement code 2

    ...InsertRec := TRUE;                     INSERT;                   END ELSE BEGIN                     "Line Amount" := "Line Amount" + (ServCrMemoLine."Line Amount" / ExchangeFactor);// Add the following line.                     SetTaxBaseAmount(TempSalesTaxLine,ServCrMemoLine."VAT Base Amount",ExchangeFactor,TRUE);// End of the added line.                     Quantity := Quantity + ServCrMemoLine.Quantity;                     IF ServCrMemoLine."Tax Liable" THEN                       "Tax Liable" := ServCrMemoLine."Tax Liable";                     InsertRec := FALSE;...
  14. Add a function SetTaxBaseAmount in the Sales Tax Calculate Codeunit (398) as follows:

    LOCAL PROCEDURE SetTaxBaseAmount@1020031(VAR SalesTaxAmountLine@1020001 : Record 10011;Value@1020000 : Decimal;ExchangeFactor@1020002 : Decimal;Increment@1020003 : Boolean);      BEGIN        WITH SalesTaxAmountLine DO BEGIN          IF Increment THEN            "Tax Base Amount FCY" += Value          ELSE            "Tax Base Amount FCY" := Value;          "Tax Base Amount" := "Tax Base Amount FCY" / ExchangeFactor;        END;      END;

Prerequisites

You must have one of the following products installed to apply this hotfix:

  • The North American version of Microsoft Dynamics NAV 2009 R2

  • The North American version of Microsoft Dynamics NAV 2009 Service Pack 1

Removal information

You cannot remove this hotfix.

Status

Microsoft has confirmed that this is a problem in the Microsoft products that are listed in the "Applies to" section.

Note This is a "FAST PUBLISH" article created directly from within the Microsoft support organization. The information contained herein is provided as-is in response to emerging issues. As a result of the speed in making it available, the materials may include typographical errors and may be revised at any time without notice. See Terms of Use for other considerations.

Need more help?

Want more options?

Explore subscription benefits, browse training courses, learn how to secure your device, and more.

Communities help you ask and answer questions, give feedback, and hear from experts with rich knowledge.