August 9, 2022—KB5016679 (Security-only update)
Release Date:
9/08/2022
Version:
Security-only update
IMPORTANT Microsoft released update KB5012170 on August 9, 2022. It provides support for Secure Boot Forbidden Signature Database (DBX). This is a standalone, security update. Windows 8.1 and newer clients and Windows Server 2012 and newer servers must install this update regardless of whether BitLocker is enabled or supported on your device. After you install the update, you might receive error “0x800f0922”; see Update might fail to install and you might receive a 0x800f0922 error. After you install the update, your device might start up in BitLocker recovery mode. See Some devices might start up into BitLocker Recovery and Finding your BitLocker recovery key in Windows.
Summary
Learn more about this security-only update, including improvements, any known issues, and how to get the update.
IMPORTANT Windows 7, Windows Server 2008 R2, Windows Embedded Standard 7, and Windows Embedded POS Ready 7 have reached the end of mainstream support and are now in extended security update (ESU) support. Windows Thin PC has reached the end of mainstream support; however, ESU support is not available.
Starting in July 2020, there will no longer be optional, non-security releases (known as "C" releases) for this operating system. Operating systems in extended support have only cumulative monthly security updates (known as the "B" or Update Tuesday release).
Verify that you have installed the required updates in the How to get this update section before installing this update.
Customers who have purchased the Extended Security Update (ESU) for on-premises versions of this OS must follow the procedures in KB4522133 to continue receiving security updates after extended support ended on January 14, 2020. For more information about ESU and which editions are supported, see KB4497181.
Because ESU is available as a separate SKU for each of the years in which they are offered (2020, 2021, and 2022)—and because ESU can only be purchased in specific 12-month periods—you must purchase the third year of ESU coverage separately and activate a new key on each applicable device for your devices to continue receiving security updates in 2022.
If your organization did not purchase the third year of ESU coverage, you must purchase Year 1, Year 2, and Year 3 ESU for your applicable Windows 7 SP1 or Windows Server 2008 R2 SP1 devices before you install and activate the Year 3 MAK keys to receive updates. The steps to install, activate, and deploy ESUs are the same for first, second, and third year coverage. For more information, see Obtaining Extended Security Updates for eligible Windows devices for the Volume Licensing process and Purchasing Windows 7 ESUs as a Cloud Solution Provider for the CSP process. For embedded devices, contact your original equipment manufacturer (OEM).
For more information, see the ESU blog.
Improvements
This security-only update includes new improvements for the following issue:
-
Addresses an issue in which Speech and Network troubleshooters will not start.
-
Addresses an issue that might cause the Local Security Authority Server Service (LSASS) to leak tokens. This issue affects devices that have installed Windows updates dated June 14, 2022 or later. This issue occurs when the device performs a specific form of service for user (S4U) in a non-Trusted Computing Base (TCB) Windows service that runs as Network Service.
-
Enforces a hardening change that requires printers and scanners that use smart cards for authentication to have firmware that complies with section 3.2.1 of RFC 4556. If they do not comply, Active Directory domain controllers will not authenticate them. Mitigations that allowed non-compliant devices to authenticate will not exist after August 9, 2022. For more information about this change, see KB5005408.
For more information about the resolved security vulnerabilities, please refer to the Deployments | Security Update Guide and the August 2022 Security Updates.
Known issues in this update
Symptom |
Next step |
After installing this update and restarting your device, you might receive the error, “Failure to configure Windows updates. Reverting Changes. Do not turn off your computer,” and the update might show as Failed in Update History. |
This is expected in the following circumstances:
|
Starting at 12:00 A.M. Saturday, September 10, 2022, the official time in Chile will advance 60 minutes in accordance with the August 9, 2022 official announcement by Chilean government about a daylight saving time (DST) time zone change. This moves the DST change which was previously September 4 to September 10. Symptoms if the workaround is not used on devices between September 4, 2022 and September 11, 2022:
Windows devices and apps outside of Chile might also be affected if they are connecting to servers or devices in Chile or if they are scheduling or attending meetings taking place in Chile from another location or time zone. Windows devices outside of Chile should not use the workaround, as it would change their local time on the device. |
This issue is resolved in update KB5018479. |
How to get this update
Before installing this update
IMPORTANT Customers who have purchased the Extended Security Update (ESU) for on-premises versions of these operating systems must follow the procedures in KB4522133 to continue receiving security updates. Extended support ended as follows:
-
For Windows 7 Service Pack 1 and Windows Server 2008 R2 Service Pack 1, extended support ended on January 14, 2020.
-
For Windows Embedded Standard 7, extended support ended on October 13, 2020.
-
For Windows Embedded POS Ready 7, extended support ended on October 12, 2021.
-
For Windows Thin PC, extended support ended on October 12, 2021. Note that ESU support is not available for Windows Thin PC.
For more information about ESU and which editions are supported, see KB4497181.
Note For Windows Embedded Standard 7, Windows Management Instrumentation (WMI) must be enabled to get updates from Windows Update or Windows Server Update Services.
Prerequisite:
You must install the updates listed below and restart your device before installing the latest Rollup. Installing these updates improves the reliability of the update process and mitigates potential issues while installing the Rollup and applying Microsoft security fixes.
-
The March 12, 2019 servicing stack update (SSU) (KB4490628). To get the standalone package for this SSU, search for it in the Microsoft Update Catalog. This update is required to install updates that are only SHA-2 signed.
-
The latest SHA-2 update (KB4474419) released September 10, 2019. If you are using Windows Update, the latest SHA-2 update will be offered to you automatically. This update is required to install updates that are only SHA-2 signed. For more information on SHA-2 updates, see 2019 SHA-2 Code Signing Support requirement for Windows and WSUS.
-
To get this security update, you must reinstall the "Extended Security Updates (ESU) Licensing Preparation Package" (KB4538483) or the "Update for the Extended Security Updates (ESU) Licensing Preparation Package" (KB4575903) even if you previously installed the ESU key. The ESU licensing preparation package will be offered to you from WSUS. To get the standalone package for ESU licensing preparation package, search for it in the Microsoft Update Catalog.
After installing the items above, Microsoft strongly recommends that you install the latest SSU (KB5016057). If you are using Windows Update, the latest SSU will be offered to you automatically if you are an ESU customer. To get the standalone package for the latest SSU, search for it in the Microsoft Update Catalog. For general information about SSUs, see Servicing stack updates and Servicing Stack Updates (SSU): Frequently Asked Questions.
REMINDER If you are using Security-only updates, you will also need to install all previous Security-only updates and the latest cumulative update for Internet Explorer (KB5016618).
Install this update
Release Channel |
Available |
Next Step |
Windows Update and Microsoft Update |
No |
See the other options below. |
Microsoft Update Catalog |
Yes |
To get the standalone package for this update, go to the Microsoft Update Catalog website. |
Windows Server Update Services (WSUS) |
Yes |
This update will automatically sync with WSUS if you configure Products and Classifications as follows: Product: Windows 7 Service Pack 1, Windows Server 2008 R2 Service Pack 1, Windows Embedded Standard 7 Service Pack 1, Windows Embedded POSReady 7 Classification: Security Updates |
File information
For a list of the files that are provided in this update, download the file information for update KB5016679.
References
Learn about the standard terminology that is used to describe Microsoft software updates.