You can unexpectedly create a warehouse receipt for a location that has Require Receipt disabled in Microsoft Dynamics NAV 2009

Hotfix information

A supported hotfix is now available from Microsoft. However, it is only intended to correct the problem that is described in this article. Apply it only to systems that are experiencing this specific problem. This hotfix may receive additional testing. Therefore, if you are not severely affected by this problem, we recommend that you wait for the next Microsoft Dynamics NAV service pack or the next Microsoft Dynamics NAV version that contains this hotfix.

Note In special cases, charges that are ordinarily incurred for support calls may be canceled if a Technical Support Professional for Microsoft Dynamics and related products determines that a specific update will resolve your problem. The usual support costs will apply to additional support questions and issues that do not qualify for the specific update in question.

Installation information

Microsoft provides programming examples for illustration only, without warranty either expressed or implied. This includes, but is not limited to, the implied warranties of merchantability or fitness for a particular purpose. This article assumes that you are familiar with the programming language that is being demonstrated and with the tools that are used to create and to debug procedures. Microsoft support engineers can help explain the functionality of a particular procedure. However, they will not modify these examples to provide added functionality or construct procedures to meet your specific requirements.

Note Before you install this hotfix, verify that all Microsoft Dynamics NAV client users are logged off the system. This includes Microsoft Dynamics NAV Application Server (NAS) services. You should be the only client user who is logged on when you implement this hotfix.

To implement this hotfix, you must have a developer license.

We recommend that the user account in the Windows Logins window or in the Database Logins window be assigned the "SUPER" role ID. If the user account cannot be assigned the "SUPER" role ID, you must verify that the user account has the following permissions:

• The Modify permission for the object that you will be changing.

• The Execute permission for the System Object ID 5210 object and for the System Object ID 9015
  
  object.

Note You do not have to have rights to the data stores unless you have to perform data repair.

Code changes

Note Always test code fixes in a controlled environment before you apply the fixes to your production computers.

To resolve this problem, follow these steps:

1. Change the code in the CreateFromPurchOrder function in the Get Source Doc. Inbound codeunit (5751) as follows:
   Existing code

   ...
   WhseRqst.SETRANGE("Source No.","No.");
   WhseRqst.SETRANGE("Document Status",WhseRqst."Document Status"::Released);
   
   IF WhseRqst.FIND('-') THEN BEGIN
   ...

   Replacement code

   ...
   WhseRqst.SETRANGE("Source No.","No.");
   WhseRqst.SETRANGE("Document Status",WhseRqst."Document Status"::Released);
   
   // Add the following line.
   GetRequireReceiveRqst(WhseRqst);
   // End of the added line.
   
   IF WhseRqst.FIND('-') THEN BEGIN
   ...

2. Change the code in the CreateFromSalesReturnOrder function in the Get Source Doc. Inbound codeunit (5751) as follows:
   Existing code

   ...
   WhseRqst.SETRANGE("Source No.","No.");
   WhseRqst.SETRANGE("Document Status",WhseRqst."Document Status"::Released);
   
   IF WhseRqst.FIND('-') THEN BEGIN
   ...

   Replacement code

   ...
   WhseRqst.SETRANGE("Source No.","No.");
   WhseRqst.SETRANGE("Document Status",WhseRqst."Document Status"::Released);
   
   // Add the following line.
   GetRequireReceiveRqst(WhseRqst);
   // End of the added line.
   
   IF WhseRqst.FIND('-') THEN BEGIN
   ...

3. Change the code in the CreateFromInbndTransferOrder function in the Get Source Doc. Inbound codeunit (5751) as follows:
   Existing code

   ...
   WhseRqst.SETRANGE("Source No.","No.");
   WhseRqst.SETRANGE("Document Status",WhseRqst."Document Status"::Released);
   
   IF WhseRqst.FIND('-') THEN BEGIN
   ...

   Replacement code

   ...
   WhseRqst.SETRANGE("Source No.","No.");
   WhseRqst.SETRANGE("Document Status",WhseRqst."Document Status"::Released);
   
   // Add the following line.
   GetRequireReceiveRqst(WhseRqst);
   // End of the added line.
   
   IF WhseRqst.FIND('-') THEN BEGIN
   ...

4. Change the code in the GetRequireReceiveRqst function in the Get Source Doc. Inbound codeunit (5751) as follows:
   Existing code

   ...
   END;
   
   BEGIN
   END.
   ...

   Replacement code

   ...
   END;
   
   // Add the following lines.
   LOCAL PROCEDURE GetRequireReceiveRqst@11(VAR WhseRqst@1001 : Record 5765);
   VAR
   Location@1002 : Record 14;
   LocationCode@1003 : Text[250];
   BEGIN
   IF WhseRqst.FINDSET THEN BEGIN
   REPEAT
   IF Location.RequireReceive(WhseRqst."Location Code") THEN
   LocationCode += WhseRqst."Location Code" + '|';
   UNTIL WhseRqst.NEXT = 0;
   IF LocationCode <> '' THEN
   LocationCode := COPYSTR(LocationCode,1,STRLEN(LocationCode) - 1);
   WhseRqst.SETFILTER("Location Code",LocationCode)
   END;
   END;
   // End of the added lines.
   
   BEGIN
   END.
   ...

5. Change the code in the CreateFromSalesOrder function in the Get Source Doc. Outbound codeunit (5752) as follows:
   Existing code

   ...
   WhseRqst.SETRANGE("Source No.","No.");
   WhseRqst.SETRANGE("Document Status",WhseRqst."Document Status"::Released);
   
   IF WhseRqst.FIND('-') THEN BEGIN
   ...

   Replacement code

   ...
   WhseRqst.SETRANGE("Source No.","No.");
   WhseRqst.SETRANGE("Document Status",WhseRqst."Document Status"::Released);
   
   // Add the following line.
   GetRequireShipRqst(WhseRqst);
   // End of the added line.
   
   IF WhseRqst.FIND('-') THEN BEGIN
   ...

6. Change the code in the CreateFromPurchaseReturnOrder function in the Get Source Doc. Outbound codeunit (5752) as follows:
   Existing code

   ...
   WhseRqst.SETRANGE("Source No.","No.");
   WhseRqst.SETRANGE("Document Status",WhseRqst."Document Status"::Released);
   
   IF WhseRqst.FIND('-') THEN BEGIN
   ...

   Replacement code

   ...
   WhseRqst.SETRANGE("Source No.","No.");
   WhseRqst.SETRANGE("Document Status",WhseRqst."Document Status"::Released);
   
   // Add the following line.
   GetRequireShipRqst(WhseRqst);
   // End of the added line.
   
   IF WhseRqst.FIND('-') THEN BEGIN
   ...

7. Change the code in the CreateFromOutbndTransferOrder function in the Get Source Doc. Outbound codeunit (5752) as follows:
   Existing code

   ...
   WhseRqst.SETRANGE("Source No.","No.");
   WhseRqst.SETRANGE("Document Status",WhseRqst."Document Status"::Released);
   
   IF WhseRqst.FIND('-') THEN BEGIN
   ...

   Replacement code

   ...
   WhseRqst.SETRANGE("Source No.","No.");
   WhseRqst.SETRANGE("Document Status",WhseRqst."Document Status"::Released);
   
   // Add the following line.
   GetRequireShipRqst(WhseRqst);
   // End of the added line.
   
   IF WhseRqst.FIND('-') THEN BEGIN
   ...

8. Change the code in the GetRequireShipRqst function in the Get Source Doc. Outbound codeunit (5752) as follows:
   Existing code

   ...
   END;
   
   BEGIN
   END.
   ...

   Replacement code

   ...
   END;
   
   // Add the following lines.
   LOCAL PROCEDURE GetRequireShipRqst@10(VAR WhseRqst@1000 : Record 5765);
   VAR
   Location@1001 : Record 14;
   LocationCode@1002 : Text[250];
   BEGIN
   IF WhseRqst.FINDSET THEN BEGIN
   REPEAT
   IF Location.RequireShipment(WhseRqst."Location Code") THEN
   LocationCode += WhseRqst."Location Code" + '|';
   UNTIL WhseRqst.NEXT = 0;
   IF LocationCode <> '' THEN
   LocationCode := COPYSTR(LocationCode,1,STRLEN(LocationCode) - 1);
   WhseRqst.SETFILTER("Location Code",LocationCode);
   END;
   END;
   // End of the added lines.
   
   BEGIN
   END.
   ...

Prerequisites

You must have one of the following products installed to apply this hotfix:

• Microsoft Dynamics NAV 2009 R2

• Microsoft Dynamics NAV 2009 Service Pack 1

Removal information

You cannot remove this hotfix.