Naming conventions in Active Directory for computers, domains, sites, and OUs

This article describes the naming conventions for computer accounts in Windows, NetBIOS domain names, DNS domain names, Active Directory sites, and organizational units (OUs) that are defined in Active Directory Domain Services (AD DS).

Original KB number:   909264

Summary

This article discusses the following topics:

  • The valid characters for names
  • The minimum and maximum name lengths
  • Reserved names
  • Names that we don't recommend
  • General recommendations for supporting AD DS in small, medium, and large deployments

All objects that are named within AD DS, Active Directory Application Mode (ADAM), or Active Directory Lightweight Directory Services (AD LDS) are subject to a name matching process that's based on the algorithm that's described in the following article:

You can't add a user name or an object name that only differs by a character with a diacritic mark.

In that article, this naming convention applies to computer names, OU names, and site names.

Computer names

NetBIOS computer names

  • Allowed characters: NetBIOS computer names can contain all alphanumeric characters except for the extended characters that appear in the following Disallowed characters list. Names can contain a period, but names can't start with a period.

    Note

    Microsoft Windows NT allows non-DNS names to have period. Periods shouldn't be used in Windows. If you're upgrading a computer whose NetBIOS name contains a period, change the computer name. For more information, see Special characters later in this section.

  • Disallowed characters: NetBIOS computer names can't contain the following characters:

    • backslash (\)
    • slash (/)
    • colon (:)
    • asterisk (*)
    • question mark (?)
    • quotation mark (")
    • less than sign (<)
    • greater than sign (>)
    • vertical bar (|)
    • Computers that are members of an Active Directory domain can't have names that contain only numerals. This is a DNS restriction.

    For more information about the NetBIOS name syntax, see NetBIOS name syntax.

  • Name length rules:

    • Minimum name length: One character
    • Maximum name length: 15 characters

      Note

      The 16th character of a NetBIOS computer name is reserved for identifying the functionality that is installed on the registered network device.

  • Reserved names: See Table of reserved words.

  • Special characters: Period (.)

    A period character divides the name into a NetBIOS scope identifier and the computer name. The NetBIOS scope identifier is an optional string of characters that identify logical NetBIOS networks that run on the same physical TCP/IP network. For NetBIOS to work between computers, the computers must have the same NetBIOS scope identifier and unique computer names.

    The use of NetBIOS scopes in names is a legacy configuration. It shouldn't be used in Active Directory forests. For more information about NetBIOS scopes, see the following Request for Comments (RFC) documents:

DNS host names

  • Allowed characters: DNS names can contain only alphabetic characters (A-Z), numeric characters (0-9), the minus sign (-), and the period (.). Period characters are allowed only when they're used to delimit the components of domain style names.

    Windows domain name system (DNS) supports Unicode characters. Other implementations of DNS don't support Unicode characters. Avoid Unicode characters if queries will be passed to the servers that use non-Microsoft implementations of DNS. For more information, see the following RFCs:

  • Disallowed characters: DNS host names can't contain the following characters:

    • comma (,)
    • tilde (~)
    • colon (:)
    • exclamation point (!)
    • at sign (@)
    • number sign (#)
    • dollar sign ($)
    • percent (%)
    • caret (^)
    • ampersand (&)
    • apostrophe (')
    • period (.)
    • parentheses (())
    • braces ({})
    • underscore (_)
    • white space (blank)

      Note

      • The underscore has a special role. It's permitted for the first character in SRV records by RFC definition. However, newer DNS servers might also allow it anywhere in a name. For more information, see Complying with Name Restrictions for Hosts and Domains.

      • The DNS host name registration process substitutes a hyphen (-) character for invalid characters.

  • Name length rules:

    • The FQDN of a domain controller must be smaller than 155 bytes.
    • Minimum name length: Two characters
    • Maximum name length: 63 characters

      Note

      • If you use UTF-8 (Unicode) characters, remember that some UTF-8 characters exceed one octet in length. In that case, you can't determine the size of a name by counting the characters. The maximum size of the host name and of the fully qualified domain name (FQDN) is 63 bytes per label and 255 bytes per FQDN.

      • Windows doesn't permit computer names that exceed 15 characters, and you can't specify a DNS host name that differs from the NetBIOS host name. However, you might create host headers for a website that's hosted on a computer. In that case, the host headers are subject to this rule.

  • Additional rules for DNS host names:

    • All characters preserve their case formatting except for American Standard Code for Information Interchange (ASCII) characters.
    • The first character in a DNS host name must be alphabetic or numeric.
    • The last character must not be a minus sign or a period.
    • Two-character security descriptor definition language (SDDL) user strings that are listed in well-known SIDs list can't be used. Otherwise, import, export, and take control operations fail.
    • Computers that are members of an Active Directory domain can't have names that contain only numerals. This is a DNS restriction.
  • Reserved names per RFC: For more information, see RFC 952.

    • GATEWAY
    • GW
    • TAC
  • Reserved names in Windows: See Table of reserved words.

  • Best practices: When you create names for computers in a Windows DNS infrastructure, follow these guidelines:

    • Use a computer name that's easy for users to remember.

    • Identify the owner of the computer in the computer name.

    • Use a name that describes the purpose of the computer.

    • Match the Active Directory domain name to the primary DNS suffix of the computer name. For more information, see Disjointed namespaces.

    • Use a unique name for every computer in your organization. Avoid using the same computer name for computers in different DNS domains.

    • Use ASCII characters. This guarantees interoperability with computers that aren't running Windows.

    • When you use ASCII characters, don't use character case to indicate the owner or the purpose of a computer. For ASCII characters, DNS isn't case-sensitive. Windows and Windows applications don't preserve case in all situations.

    • Use only the characters that are listed in RFC 1123. These characters include A-Z, a-z, 0-9, and the hyphen (-). Windows DNS allows most UTF-8 characters in names. Don't use extended ASCII or UTF-8 characters unless all the DNS servers in your environment support them.

Domain names

The following sections describe NetBIOS domain names and DNS domain names.

NetBIOS domain names

  • Allowed characters: NetBIOS domain names can contain all alphanumeric characters except for the extended characters that appear in the Disallowed characters list. Names can contain a period, but names can't start with a period.

    Note

    Microsoft Windows NT allows non-DNS names to have period. Periods shouldn't be used in Active Directory NetBIOS domain names. If you're upgrading a computer whose NetBIOS name contains a period, change the name by migrating the domain to a new domain structure. Don't use periods in new NetBIOS domain names.

    The ampersand (&) character in NetBIOS domain names was allowed previously and is supported for historical purposes only. Don't create new Active Directory domains whose NetBIOS domain names contain ampersand (&) characters.

  • Disallowed characters: The DNS host name checking function verifies NetBIOS domain names. These names can't contain the following characters:

    • comma (,)
    • tilde (~)
    • colon (:)
    • exclamation point (!)
    • at sign (@)
    • number sign (#)
    • dollar sign ($)
    • percent (%)
    • caret (^)
    • apostrophe (')
    • period (.)
    • parentheses (())
    • braces ({})
    • underscore (_)
    • white space (blank)
    • backslash (\)
    • slash (/)

      Note

      Computers that are members of an Active Directory domain can't have names that contain only numeral. This is a DNS restriction.

  • Name length rules:

    • Minimum name length: One character
    • Maximum name length: 15 characters

      Note

      The 16th character of the name is reserved for identifying the functionality that is installed on the registered network device.

  • Reserved names in Windows: See Table of reserved words. The names of an upgraded domain can include a reserved word. However, trust relationships with other domains fail in this situation.

  • Special characters: Period (.)

    A period character divides the name into a NetBIOS scope identifier and the computer name. The NetBIOS scope identifier is an optional string of characters that identify logical NetBIOS networks that run on the same physical TCP/IP network. For NetBIOS to work between computers, the computers must have the same NetBIOS scope identifier and unique computer names.

    Important

    The use of NetBIOS scopes in names is a legacy configuration. It shouldn't be used in Active Directory forests. This is not an inherent problem. However, some applications might filter the name and assume a DNS name if a period is found.

DNS domain names

  • Allowed characters: DNS names can contain only alphabetic characters (A-Z), numeric characters (0-9), the minus sign (-), and the period (.). Period characters are allowed only when they're used to delimit the components of domain style names.

    Windows DNS supports Unicode characters. Other implementations of DNS don't support Unicode characters. Avoid Unicode characters if queries will be passed to the servers that use non-Microsoft implementations of DNS. For more information, see RFC 952 and RFC 1123.

  • Disallowed characters: DNS domain names can't contain the following characters:

    • comma (,)
    • tilde (~)
    • colon (:)
    • exclamation point (!)
    • at sign (@)
    • number sign (#)
    • dollar sign ($)
    • percent (%)
    • caret (^)
    • ampersand (&)
    • apostrophe (')
    • period (.)
    • parentheses (())
    • braces ({})
    • underscore (_)
    • white space (blank)

      Note

      The underscore has a special role. It's permitted for the first character in SRV records by RFC definition. But newer DNS servers might also allow it anywhere in a name. When you create a domain, you receive a warning message that states that an underscore character might cause problems for some DNS servers. However, you can still create the domain. For more information, see Complying with Name Restrictions for Hosts and Domains.

  • Additional rules:

    • All characters preserve their case formatting except for ASCII characters.
    • The first character must be alphabetic or numeric.
    • The last character must not be a minus sign or a period.
  • Name length rules:

    • Minimum name length: Two characters

    • Maximum name length: 255 characters

      Note

      If you use UTF-8 (Unicode) characters, remember that some UTF-8 characters exceed one octet in length. In that case, you can't determine the size of a name by counting the characters. The maximum size of the host name and of the FQDN is 63 bytes per label and 255 bytes per FQDN.

    • The maximum name length is based on the requirements of SYSVOL paths, and also on the MAX_PATH limitation of 260 characters.
      A path in SYSVOL resembles the following example:

      \\<FQDN domain name>\sysvol\<FQDN domain name>\policies\{<policy GUID>}\[user|machine]\<CSE-specific path>
      

      Note

      • The AD FQDN domain name appears in the path two times. Therefore, the length of an AD FQDN domain name is restricted to 64 characters.

      • The <CSE-specific path> might contain user input, such as the sign-in script file name. Therefore, it can be significantly long.

  • Single-label domain namespaces: Single-label DNS names are names that don't contain a suffix, such as .com, .corp, .net, .org, or companyname. For example, host is a single-label DNS name. Most Internet registrars don't allow the registration of single-label DNS names.

    Generally, we recommend that you register DNS names for internal and external namespaces with an Internet registrar. This includes the DNS names of Active Directory domains, unless such names are subdomains of DNS names that are registered by your organization name. For example, corp.example.com is a subdomain of example.com. Registering your DNS name with an Internet registrar may help prevent a name collision. A name collision might occur if another organization tries to register the same DNS name, or if your organization merges with another organization that uses the same DNS name.

    Problems that are associated with single-label namespaces include:

  • Reserved names: See Table of reserved words. Don't use top-level internet domain names, such as .com, .net, and .org on an intranet. If you use top-level internet domain names on an intranet, computers on the intranet that also connect to the internet might experience resolution errors. Additionally, avoid using names that are used in internet-standard special features, such as .local.

Disjointed namespaces

A disjointed namespace occurs if a computer's primary DNS suffix doesn't match the DNS domain of which it's a member. For example, a disjointed namespace occurs if a computer that has the DNS name of dc1.contosocorp.com is in a domain that has the DNS name of contoso.com.

How disjointed namespaces occur:

  • A Windows NT 4.0 primary domain controller is upgraded to a Windows 2000 Server domain controller by using the original release version of Windows 2000 Server. In the Networking item in Control Panel, multiple DNS suffixes are defined.
  • The domain is renamed when the forest is at the Windows Server 2003 forest functional level. Additionally, the primary DNS suffix isn't changed to reflect the new DNS domain name.

Effects of a disjointed namespace:

Suppose a domain controller that's named DC1 resides in a Windows NT 4.0 domain whose NetBIOS domain name is contoso. This domain controller is upgraded to Windows 2000 Server. When this upgrade occurs, the DNS domain is renamed contoso.com. In the original release version of Windows 2000 Server, the upgrade routine clears the checkbox that links the primary DNS suffix of the domain controller to its DNS domain name. Therefore, the primary DNS suffix of the domain controller is the Windows NT 4.0 DNS suffix that was defined in the Windows NT 4.0 suffix search list. In this example, the DNS name is DC1.northamerica.contoso.com.

The domain controller dynamically registers its service location (SRV) records in the DNS zone that corresponds to its DNS domain name. However, the domain controller registers its host records in the DNS zone that corresponds to its primary DNS suffix.

For more information about disjointed namespaces, see the following articles:

Other factors

  • Forests that connect to the internet: A DNS namespace that connects to the internet must be a subdomain of a top-level or second-level domain of the internet DNS namespace.

  • Maximum number of domains in a forest: In Windows Server, the maximum number of domains at Forest Functional Level 2 is 1,200. This restriction is a limitation of multivalued non-linked attributes in Windows Server.

  • Best practices:

    • The DNS names of all the nodes that require name resolution include the organization's internet DNS domain name. Because DNS is hierarchical, DNS domain names grow when you add subdomains to your organization. Therefore, you should choose an internet DNS domain name that is short and easy to remember. Short domain names make the computer names also easy to remember.

    • If the organization has an internet presence, use names that are relative to the registered internet DNS domain name. For example, if you've registered the internet DNS domain name contoso.com, use a DNS domain name such as corp.contoso.com for the intranet domain name.

    • Don't use the name of an existing corporation or product as your domain name. Doing this might cause a name collision later.

    • Avoid a generic name such as domain.localhost. This is because another company that you merge with in the future might follow the same practice.

    • Don't use an acronym or an abbreviation as a domain name. Users might have difficulty recognizing the business unit that an acronym represents.

    • Avoid the use of underscores (_) in domain names. Applications might be very RFC-obedient and reject the name. They might also not install or work in your domain. You might also experience problems that affect older DNS servers.

    • Don't use the name of a business unit or a division as a domain name. Business units and other divisions change, and these domain names can be misleading or become obsolete.

    • Don't use geographic names that are difficult to spell and remember.

    • Avoid extending the DNS domain name hierarchy more than five levels from the root domain. You can reduce administrative costs by limiting the extent of the domain name hierarchy.

    • If you're deploying DNS in a private network, and you don't plan to create an external namespace, register the DNS domain name that you create for the internal domain. Otherwise, if you try to use it on the internet, or if you connect to a network that connects to the internet, you might find that the name is unavailable.

Site names

We recommend that you use a valid DNS name when you create a new site name. Otherwise, your site will be available only where a Microsoft DNS server is used. For more information about valid DNS names, see the DNS host names section.

  • Allowed characters: DNS names can contain only alphabetic characters (A-Z), numeric characters (0-9), the minus sign (-), and the period (.). Period characters are allowed only if they're used to delimit the components of domain style names.

    Windows DNS supports Unicode characters. Other implementations of DNS don't support Unicode characters. Avoid Unicode characters if queries will be passed to the servers that use non-Microsoft implementations of DNS. For more information, see RFC 952 and RFC 1123.

  • Disallowed characters: DNS names can't contain the following characters:

    • comma (,)
    • tilde (~)
    • colon (:)
    • exclamation point (!)
    • at sign (@)
    • number sign (#)
    • dollar sign ($)
    • percent (%)
    • caret (^)
    • ampersand (&)
    • apostrophe (')
    • period (.)
    • parentheses (())
    • braces ({})
    • underscore (_)
    • white space (blank)

      Note

      The underscore has a special role. It's permitted for the first character in SRV records by RFC definition. But newer DNS servers might also allow it anywhere in a name. For more information, see Complying with Name Restrictions for Hosts and Domains.

  • Additional rules:

    • All characters except for ASCII characters preserve their case formatting.
    • The first character must be alphabetic or numeric.
    • The last character must not be a minus sign or a period.
  • Name length rules:

    • Minimum name length: One character
    • Maximum name length: 63 characters

      Note

      If you use UTF-8 (Unicode) characters, remember that some UTF-8 characters exceed one octet in length. In that case, you can't determine the size of a name by counting the characters. The maximum length of the DNS name is 63 bytes per label.

OU names

  • Allowed characters: All characters are allowed, even extended characters. Although Active Directory Users and Computers lets you name an OU with extended characters, we recommend that you use names that describe the purpose of the OU and that are short enough to easily manage. Lightweight Directory Access Protocol (LDAP) doesn't have any restrictions because the CN of the object is put into quotation marks.

  • Disallowed characters: No characters are disallowed.

  • Name length rules:

    • Minimum name length: One character
    • Maximum name length: 64 characters

Special issues for OUs

When the OU at the domain root level has the same name as a future child domain, you might experience database problems. Consider a scenario in which you delete an OU named marketing to create a child domain that has the same name. For example, marketing.contoso.com (leftmost label of the child domain FQDN name has the same name).

You delete the OU. During the tombstone lifetime of the deleted OU, you create a child domain that has the same name. Then, you delete the child domain, and then create it a second time. In this scenario, a duplicate record name in the ESE database causes a phantom-phantom name collision when the child domain is re-created. This problem prevents the Active Directory Configuration container from replicating.

Note

This problem is not restricted to DC and OU name types. A similar name conflict might also occur for other RDN name types under certain conditions.

Table of reserved words

Reserved words for names Windows NT 4.0 Windows 2000 Windows Server 2003 Windows Server 2008 and later
ANONYMOUS X X X X
AUTHENTICATED USER X X X
BATCH X X X X
BUILTIN X X X X
CREATOR GROUP X X X X
CREATOR GROUP SERVER X X X X
CREATOR OWNER X X X X
CREATOR OWNER SERVER X X X X
DIALUP X X X X
DIGEST AUTH X X
DOMAIN X
ENTERPRISE X
INTERACTIVE X X X X
INTERNET X X X
LOCAL X X X X
LOCAL SYSTEM X X
NETWORK X X X X
NETWORK SERVICE X X
NT AUTHORITY X X X X
NT DOMAIN X X X X
NTLM AUTH X X
NULL X X X X
PROXY X X X
REMOTE INTERACTIVE X X
RESTRICTED X X X
SCHANNEL AUTH X X
SELF X X X
SERVER X X X
SERVICE X X X X
SYSTEM X X X X
TERMINAL SERVER X X X
THIS ORGANIZATION X X
USERS X X
WORLD X X X X