Kokkuvõte
Selles artiklis saadaval olev skript on kaaslaseks teabega, Kuidas hallata CVE-2020-1472 seotud Netlogon-i turvaliste kanalite ühenduste muudatusi. See on saadaval AS-is.
Skript töötleb Event Viewerist eksporditavaid EVTX faile ja loob Microsoft Exceli arvutustabeli, milles on PivotTable-liigendtabelid mitmesuguste probleemide ja teie keskkonna seadmete jaoks, mis käivitasid sündmused. Skript nõuab PowerShelli ja Microsoft Excel 2013 või uuemat versiooni (64bit on soovitatav suurema hulga andmekogumite jaoks).
Kasutus
Peate eksportima EVTX faile domeeni domeenikontrollerid (DCS), mida jälgite KB4557222kirjeldatud probleemide osas. Selleks avage Event Viewer, valides Start, tippige Event Viewer ja valige see. Kui Event Viewer avaneb, laiendage Windowsi logisid, paremklõpsake või vajutage pikalt klahvikombinatsiooni System ja valige Salvesta kõik sündmused nimega... ja salvestage fail faili töötlemise lubamiseks kuhugi.
Skript saab korraga töödelda rohkem kui ühte EVTX faili. Suurtele andmekogumitele võib skriptimisel kuluda palju aega. Samuti soovitame teil failide EVTX töötlemise kiirendamiseks kasutada samu skripte kasutavas seadmetes asuvaid faile.
Peate käivitama skripti PowerShelli käsuviiba abil. Seda ei pea administraatorina käitama. Skript käivitub, kui teil on vaja vastata, kui te pole seda häälestanud $mcScriptPrompts$false . Kui EVTX failid asuvad skriptiga samas kaustas, pole teil vaja failidele juurde pääseda.
Skripti kohandamine
|
Muutuja |
Kirjeldus |
| $mcScriptPrompts |
Väärtused $true,$false Kirjeldus Vaikeväärtus on $true ja nõuab kasutajalt sisendit/suhtlust. Saab seada nii, et $falseEVTX failid on skriptiga samas kaustas ja kõik muud sätted käivituvad vaikesätetega. |
| $mcMaxExport |
Vaikeväärtus: 50000 Kirjeldus Vaikesätetega lõpetab skript iga EVTX faili töötlemise pärast 50000 sündmuste eksportimist CSV failidele. Kui teile kuvatakse Microsoft Exceli mäluga seotud tõrkeid, peate selle arvu vähendama või muutma seda, milliseid andmeid töödeldakse $mcStartTime . |
| $mcMaxImport |
Vaikeväärtus: 50000 Kirjeldus Vaikesättena peatab skript sündmuste töötlemise pärast praeguse CSV-faili töötlemist, kui see tabab arvu 50000 sündmuste maksimumarvu. See tähendab, et kui see tabab sündmuste suurimat arvu, viiakse lõpule praeguse faili käivitamine, CSV kuid ei hakka uut faili töötlema CSV . |
| $mcStartTime |
Vaikeväärtus: '2020/05/26 11:06' Kirjeldus See muutuja võimaldab määrata alguskellaaeg ja skripti töötleb sündmusi üksnes pärast seda päeva ja kellaaega. Kui olete seadmed juba mõnda kindlasse kohta suunanud, saate seda teha ainult teie jaoks. |
| $mcMaxThreads |
Vaikeväärtus: 4 Kirjeldus See muutuja võimaldab teil failide failidesse importimisel kasutatud lõimede arvu suurendada või vähendada EVXTCSV . |
Skripti
Allpool leiate PowerShelli skripti, mida saate kasutada pärast oma keskkonna kohandamist. Peate selle skripti kopeerima ja kleepima CVE-2020-1472EventReader.ps1 faili, mida kasutate sündmuste töötlemiseks.
# ---------------------------------
# CVE-2020-1472 Event Reader v1.0 8/4/2020
# This script will:
# 1. Scan system evtx in input file folder for event 5827, 5828,5829,5830 and 5831, exact data fields, export to 582#-*.CSV.
# 2. Calls Excel to import resulting 582#-*.CSV, create pivot tables for common secure RPC analysis scenarios. Delete 582#-*.CSV afterward.
# Feel free to modify to fit your need.
# ---------------------------------
# Script requires Excel 2013 or later.
# 64 bits Excel will allow creation of larger data import to XLS.
# ---------------------------------
# To use the script:
# 1. Save system log as system.evtx to file.
# 2. Follow on screen prompt to enter Path containing *.evtx and final xlsx.
#
# More info https://support.microsoft.com/kb/4557222
#---------------------------------------
#Script Globals/ Tuning variables.
#---------------------------------------
# - $mcScriptPrompts > when set to $false, script will process all evtx in the script file folder without prompting. Good for dropping evtx, right-click script to "Run with powershell"
# - $mcMaxExport > max events to export per EVTX, set to low number for quick sample/spot checks.
# - $mcMaxImport > max events to import into excel, script will finish current file and stop importing next file(s). Set to lower number if Excel is returning memory error during import.
# - $mcStartTime > Earliest event to export, in the form of 'yyyy/MM/dd HH:mm', where HH 13 is 1pm, example: '2017/05/26 13:01'. Use this to filter progress.
# - $mcMaxThreads > max number of evtx files to export at the same time. 4 default, set to 8 and experiment if you have fast SSD HDD.
#
# Script variables block, modify to fit your need ---------------------------------------------------------------------
$mcScriptPrompts = $True #Script default, $false for non-interactive input & output.
$mcMaxExport = 50000 #50000 Max events to export per each EVTX, modify this if we are getting Excel memory error (or we just need first few evt for samples)
$mcMaxImport = 50000 #50000 max events to import into excel, ##NOTE##: Once maxed out, script will finish current import file and stop future import(s).
$mcStartTime = '2020/05/26 11:06' #Earliest 582* event to export, in the form of 'yyyy/MM/dd HH:mm', where HH 13 is 1pm, example: '2020/05/26 11:06' will list events starting 05/26 11:06, use this to filter new events.
$mcMaxThreads = 4 #Max concurrent Evt to CSV export threads (jobs)
# Internal values init, do not modify -------------------------------------------------------------------------------------
$mcCSVImport = $true
$mcEvtPath = $null
$mcStartTime=[datetime]::ParseExact($mcStartTime,'yyyy/MM/dd HH:mm',$null) #Convert string to timestamp
$mcProgressBarDelay = 0 #Delay in seconds after each ProgressBar update
#----Functions--------------------------
Function mcSetPivotField($mcPivotFieldSetting) { #Set pivot field attributes per MSDN https://msdn.microsoft.com/en-us/library/office/ff820762.aspx
if ($mcPivotFieldSetting[1] -ne $null) { $mcPivotFieldSetting[0].Orientation = $mcPivotFieldSetting[1]} # 1 Orientation { $xlRowField | $xlDataField |$xlColumnField }, in XlPivotFieldOrientation
if ($mcPivotFieldSetting[2] -ne $null) { $mcPivotFieldSetting[0].NumberFormat = $mcPivotFieldSetting[2]} # 2 NumberFormat { $mcNumberF | $mcPercentF }
if ($mcPivotFieldSetting[3] -ne $null) { $mcPivotFieldSetting[0].Function = $mcPivotFieldSetting[3]} # 3 Function { $xlAverage | $xlSum | $xlCount }, in XlConsolidationFunction
if ($mcPivotFieldSetting[4] -ne $null) { $mcPivotFieldSetting[0].Calculation = $mcPivotFieldSetting[4]} # 4 Calculation { $xlPercentOfTotal | $xlPercentRunningTotal }, in XlPivotFieldCalculation
if ($mcPivotFieldSetting[5] -ne $null) { $mcPivotFieldSetting[0].BaseField = $mcPivotFieldSetting[5]} # 5 BaseField <String>
if ($mcPivotFieldSetting[6] -ne $null) { $mcPivotFieldSetting[0].Name = $mcPivotFieldSetting[6]} # 6 Name <String>
if ($mcPivotFieldSetting[7] -ne $null) { $mcPivotFieldSetting[0].Position = $mcPivotFieldSetting[7]} # 7 Position
}
Function mcSetPivotTableFormat($mcPivotTable) { # Set pivotTable cosmetics and sheet name
$mcPT=$mcPivotTable[0].PivotTables($mcPivotTable[1])
$mcPT.HasAutoFormat = $False #2.turn of AutoColumnWidth
for ($i=2; $i -lt 9; $i++) { #3. SetColumnWidth for Sheet($mcPivotTable[0]),PivotTable($mcPivotTable[1]),Column($mcPivotTable[2-8])
if ($mcPivotTable[$i] -ne $null) { $mcPivotTable[0].columns.item(($i-1)).columnWidth = $mcPivotTable[$i]}
}
$mcPivotTable[0].Application.ActiveWindow.SplitRow = 3
$mcPivotTable[0].Application.ActiveWindow.SplitColumn = 2
$mcPivotTable[0].Application.ActiveWindow.FreezePanes = $true #1.Freeze R1C1
$mcPivotTable[0].Cells.Item(1,1)="Filter"
$mcPivotTable[0].Cells.Item(3,1)=$mcPivotTable[9] #4 set TXT at R3C1 with PivotTableName$mcPivotTable[9]
$mcPivotTable[0].Name=$mcPivotTable[10] #5 Set Sheet Name to $mcPivotTable[10]
$mcRC = ($mcPivotTable[0].UsedRange.Cells).Rows.Count-1
if ($mcPivotTable[11] -ne $null) { # $mcPivotTable[11] Set ColorScale
$mColorScaleRange='$'+$mcPivotTable[11]+'$4:$'+$mcPivotTable[11]+'$'+$mcRC
[Void]$mcPivotTable[0].Range($mColorScaleRange).FormatConditions.AddColorScale(3) #$mcPivotTable[11]=ColorScale
$mcPivotTable[0].Range($mColorScaleRange).FormatConditions.item(1).ColorScaleCriteria.item(1).type = 1 #xlConditionValueLowestValue
$mcPivotTable[0].Range($mColorScaleRange).FormatConditions.item(1).ColorScaleCriteria.item(1).FormatColor.Color = 8109667
$mcPivotTable[0].Range($mColorScaleRange).FormatConditions.item(1).ColorScaleCriteria.item(2).FormatColor.Color = 8711167
$mcPivotTable[0].Range($mColorScaleRange).FormatConditions.item(1).ColorScaleCriteria.item(3).type = 2 #xlConditionValueHighestValue
$mcPivotTable[0].Range($mColorScaleRange).FormatConditions.item(1).ColorScaleCriteria.item(3).FormatColor.Color = 7039480
}
if ($mcPivotTable[12] -ne $null) { # $mcPivotTable[12] Set DataBar
$mcDataBarRange='$'+$mcPivotTable[12]+'$4:$'+$mcPivotTable[12]+'$'+$mcRC
[void]$mcPivotTable[0].Range($mcDataBarRange).FormatConditions.AddDatabar() #$mcPivotTable[12]:Set DataBar
}
}
Function mcSortPivotFields($mcPF) { #Sort on $mcPF and collapse later pivot fields
for ($i=2; $i -lt 5; $i++) { #collapse later pivot fields
if ($mcPF[$i] -ne $null) {
$mcPF[$i].showDetail = $false
}
}
[void]($mcPF[0].Cells.Item(4, 2)).sort(($mcPF[0].Cells.Item(4, 2)), 2)
[void]($mcPF[0].Cells.Item(4, 1)).sort(($mcPF[0].Cells.Item(4, 1)), 1)
}
Function mcSetPivotTableHeaderColor($mcSheet) { #Set PiviotTable Header Color for easier reading
for ($i=1; $i -lt 5; $i++) { #Set header(s) color
if ($mcSheet[$i] -ne $null) { $mcSheet[0].Range(($mcSheet[$i]+"3")).interior.Colorindex = 37 }
}
}
#----Main---------
#---- script info-------
$mcScriptPath = Split-Path ((Get-Variable MyInvocation -Scope 0).Value).MyCommand.Path
if ($mcScriptPrompts) { #Interactive mcScriptPrompts
$mcEvtPath = Read-Host "Enter local, mapped or UNC path to saved system evtx or previously generated 582-*.csv. Be sure to remove trailing blank. For Example (c:\EventData)`n Or press [Enter] if script is in the same file folder as evtx or csv.`n"
if ($mcEvtPath -eq '') { #If there is no Path entered, we will use the same file folder as script path.
$mcEvtPath= $mcScriptPath
Write-Output "No path entered, default to " $mcEvtPath
}
} else {
$mcEvtPath= $mcScriptPath #Non-interactive script uses script path for Event path
}
#---- Export evtx to CSV---------------------------------------------------
Write-Output 'Convert evtx to csv.'
$mcFiles = Get-ChildItem -Path $mcEvtPath | Where {$_.name -clike '*.evtx'}
ForEach ($mcFile in $mcFiles) { #Loop through *.evtx
$mcFile | Add-Member -MemberType NoteProperty -Name MaxEvents -force -Value $mcMaxExport
$mcFile | Add-Member -MemberType NoteProperty -Name StartTime -force -Value $mcStartTime
#Job [ #Job start code 1
Start-Job -ArgumentList (,$mcFile) -ScriptBlock { #Start-Job for reading each files
param ($mcFile)
#Job ]
Write-Output "Reading $mcFile"
$mc582s = Get-WinEvent -FilterHashtable @{Path=$mcfile.FullName; LogName="System"; Level=3,4; StartTime=$mcFile.StartTime; id=5827,5828,5829,5830,5831} -MaxEvents $mcFile.MaxEvents -ErrorAction SilentlyContinue
If ($mc582s -ne $null) {
$mcOutFile = $mcFile.DirectoryName+'\582-'+$mcFile.Name+'.csv'
Write-Output " Event 5826-28 found, generating $mcOutFile"
$mc582sOut = @() #Array for exporting CSV items
ForEach ($mc582 in $mc582s) {
$mcObject = New-Object System.Object
$mcObject | Add-Member -MemberType NoteProperty -Name EventSource -force -value $mc582.MachineName
$mcObject | Add-Member -MemberType NoteProperty -Name EventTime -force -value $mc582.TimeCreated
$mcObject | Add-Member -MemberType NoteProperty -Name EventID -force -value $mc582.ID
switch ($mc582.ID) {
5827 { #Denided Unsecure RPC machine client
$mcObject | Add-Member -MemberType NoteProperty -Name NRPCType -force -value '2 - Denied Unsecure NRPC Evt:5827,5828'
$mcObject | Add-Member -MemberType NoteProperty -Name Name -force -value $mc582.Properties[0].value
$mcObject | Add-Member -MemberType NoteProperty -Name DomainName -force -value $mc582.Properties[1].value
$mcObject | Add-Member -MemberType NoteProperty -Name AccountType -force -value $mc582.Properties[2].value
$mcObject | Add-Member -MemberType NoteProperty -Name MachineOS -force -value $mc582.Properties[3].value
$mcObject | Add-Member -MemberType NoteProperty -Name MachineOsBuild -force -value $mc582.Properties[4].value
$mcObject | Add-Member -MemberType NoteProperty -Name MachineOsServicePack -force -value $mc582.Properties[5].value
}
5829 { #Temp Allowed Unsecure RPC machine client
$mcObject | Add-Member -MemberType NoteProperty -Name NRPCType -force -value '1 - TempAllowed Unsecure NRPC Evt:5829'
$mcObject | Add-Member -MemberType NoteProperty -Name Name -force -value $mc582.Properties[0].value
$mcObject | Add-Member -MemberType NoteProperty -Name DomainName -force -value $mc582.Properties[1].value
$mcObject | Add-Member -MemberType NoteProperty -Name AccountType -force -value $mc582.Properties[2].value
$mcObject | Add-Member -MemberType NoteProperty -Name MachineOS -force -value $mc582.Properties[3].value
$mcObject | Add-Member -MemberType NoteProperty -Name MachineOsBuild -force -value $mc582.Properties[4].value
$mcObject | Add-Member -MemberType NoteProperty -Name MachineOsServicePack -force -value $mc582.Properties[5].value
}
5830 { #Allowed Unsecure RPC machine client
$mcObject | Add-Member -MemberType NoteProperty -Name NRPCType -force -value '3 - Allowed Unsecure NRPC Evt:5830,5831'
$mcObject | Add-Member -MemberType NoteProperty -Name Name -force -value $mc582.Properties[0].value
$mcObject | Add-Member -MemberType NoteProperty -Name DomainName -force -value $mc582.Properties[1].value
$mcObject | Add-Member -MemberType NoteProperty -Name AccountType -force -value $mc582.Properties[2].value
$mcObject | Add-Member -MemberType NoteProperty -Name MachineOS -force -value $mc582.Properties[3].value
$mcObject | Add-Member -MemberType NoteProperty -Name MachineOsBuild -force -value $mc582.Properties[4].value
$mcObject | Add-Member -MemberType NoteProperty -Name MachineOsServicePack -force -value $mc582.Properties[5].value
}
5828 { #Temp Allowed Unsecure RPC trust
$mcObject | Add-Member -MemberType NoteProperty -Name NRPCType -force -value '2 - Denied Unsecure NRPC Evt:5827,5828'
$mcObject | Add-Member -MemberType NoteProperty -Name Name -force -value $mc582.Properties[1].value
$mcObject | Add-Member -MemberType NoteProperty -Name DomainName -force -value $mc582.Properties[2].value
$mcObject | Add-Member -MemberType NoteProperty -Name AccountType -force -value $mc582.Properties[0].value
$mcObject | Add-Member -MemberType NoteProperty -Name MachineOS -force -value 'Domain Trust'
$mcObject | Add-Member -MemberType NoteProperty -Name MachineOsBuild -force -value 'N/A'
$mcObject | Add-Member -MemberType NoteProperty -Name MachineOsServicePack -force -value 'N/A'
}
5831 { #Allowed Unsecure RPC trust
$mcObject | Add-Member -MemberType NoteProperty -Name NRPCType -force -value '3 - Allowed Unsecure NRPC Evt:5830,5831'
$mcObject | Add-Member -MemberType NoteProperty -Name Name -force -value $mc582.Properties[1].value
$mcObject | Add-Member -MemberType NoteProperty -Name DomainName -force -value $mc582.Properties[2].value
$mcObject | Add-Member -MemberType NoteProperty -Name AccountType -force -value $mc582.Properties[0].value
$mcObject | Add-Member -MemberType NoteProperty -Name MachineOS -force -value 'Domain Trust'
$mcObject | Add-Member -MemberType NoteProperty -Name MachineOsBuild -force -value 'N/A'
$mcObject | Add-Member -MemberType NoteProperty -Name MachineOsServicePack -force -value 'N/A'
}
}
$mcObject.Name = $mcObject.Name.Trim()
$mcObject.DomainName = $mcObject.DomainName.Trim()
$mcObject.AccountType = $mcObject.AccountType.Trim()
$mcObject.MachineOS = $mcObject.MachineOS.Trim()
$mcObject.MachineOsBuild = $mcObject.MachineOsBuild.Trim()
$mcObject.MachineOsServicePack = $mcObject.MachineOsServicePack.Trim()
$mc582sOut += $mcObject
}
$mc582sout | ConvertTo-Csv -NoTypeInformation | Out-File $mcOutFile
}
#Job [ # Maxthread code 2/3
} | Out-Null #Job output
Write-Output " Processing: $mcFile"
While((Get-Job -State 'Running').Count -ge $mcMaxThreads) { Start-Sleep -Milliseconds 10 } # Pause, only run $mcMaxThreads number of jobs.
#Job ]
}
#Job [ # Job clean out code 3/3
While((Get-Job -State 'Running').Count -gt 0) {
Write-Progress -Activity "Exporting evtx" -PercentComplete ((($mcfiles.Count-(Get-Job -State 'Running').Count)/$mcfiles.Count)*100)
Start-Sleep -Milliseconds 10
} # wait for last job to complete
#Get-Job | Receive-Job
Get-Job -State Completed | Remove-Job
#Job ]
#---- Import csv to excel-----------------------------------------------------
if ($mcCSVImport -eq $true) { #Debug only, perforem CSV to Excel import
$mcFiles = Get-ChildItem -Path $mcEvtPath | Where {$_.name -clike '582-*.csv'}
If ($mcFiles -ne $null) { #Create a new Excel workbook if there are CSV in directory.
cd $mcEvtPath #for Import-Csv to read all files.
$mcObject = Import-Csv $mcfiles -Delimiter ','
cd $mcScriptPath #Back to script path
#Write-Output 'Import csv to excel.'
$mcExcel = New-Object -ComObject excel.application
$mcWorkbooks = $mcExcel.Workbooks.Add()
$Sheet1 = $mcWorkbooks.worksheets.Item(1)
$mcCurrentRow = $mcFileProcessed = 1
ForEach ($mcFile in $mcFiles) { #Define Excel TXT connector and import/append
Write-Progress -Activity "Importing $mcFile" -PercentComplete (($mcFileProcessed/$mcfiles.Count)*100)
Sleep $mcProgressBarDelay
$mcFileProcessed=$mcFileProcessed+1
if ($mcCurrentRow -le $mcMaxImport){ #Import only up to $mcMaxImport number of records.
$mcConnector = $Sheet1.QueryTables.add(("TEXT;" + $mcEvtPath+'\'+$mcFile),$Sheet1.Range(('a'+($mcCurrentRow))))
$Sheet1.QueryTables.item($mcConnector.name).TextFileCommaDelimiter = $True
$Sheet1.QueryTables.item($mcConnector.name).TextFileParseType = 1
[void]$Sheet1.QueryTables.item($mcConnector.name).Refresh()
if ($mcCurrentRow -ne 1) { [void]($Sheet1.Cells.Item($mcCurrentRow,1).entireRow).delete()} # Delete header on 2nd and later CSV.
$mcCurrentRow = $Sheet1.UsedRange.EntireRow.Count+1
} else {
Write-Output " *** Max [ $mcMaxImport ] import events reached, skipping: $mcfile"
}
}
#---- Customize XLS, Excel Globals--------------------------------------------------------
#Write-Output 'Customizing XLS.' #https://msdn.microsoft.com/en-us/library/bb241425(v=office.12).aspx, https://msdn.microsoft.com/en-us/library/office/ff838592.aspx
$xlRowField = 1 #XlPivotFieldOrientation
$xlPageField = 3 #XlPivotFieldOrientation
$xlDataField = 4 #XlPivotFieldOrientation
$xlColumnField = 2 #XlPivotFieldOrientation
$xlAverage = -4106 #XlConsolidationFunction
$xlSum = -4157 #XlConsolidationFunction
$xlCount = -4112 #XlConsolidationFunction
$xlPercentOfTotal = 8 #XlPivotFieldCalculation
$xlPercentRunningTotal = 13 #XlPivotFieldCalculation
$mcNumberF = "###,###,###,###,###"
$mcPercentF = "#0.00%"
$mcDateF = "yyyy/m/d h:mm"
$mcDateGroupFlags=($false, $false, $true, $true, $true, $false, $false) # Months, Days, Hours, https://msdn.microsoft.com/en-us/library/office/ff839808.aspx
#-------#Sheet1 - RawData---------------------------------------------------------------
$Sheet1.Range("A1").Autofilter() | Out-Null
$Sheet1.Application.ActiveWindow.SplitRow = 1
$Sheet1.Application.ActiveWindow.FreezePanes = $true
#Write-Output 'Tab 0.5826, 5827, 5828 events imported'
Write-Progress -Activity "Created 0.Raw RPC events Tab" -PercentComplete 30
Sleep $mcProgressBarDelay
#-------#Sheet2 - PivotTable1---------------------------------------------------------------
$Sheet2 = $mcWorkbooks.Worksheets.add()
$PivotTable1 = $mcWorkbooks.PivotCaches().Create(1,"Sheet1!R1C1:R$($Sheet1.UsedRange.Rows.count)C$($Sheet1.UsedRange.Columns.count)",5) # xlDatabase=1 xlPivotTableVersion15=5 Excel2013
$PivotTable1.CreatePivotTable("Sheet2!R1C1") | Out-Null
$mcPF00 = $Sheet2.PivotTables("PivotTable1").PivotFields("EventSource")
mcSetPivotField($mcPF00, $xlPageField, $null, $null, $null, $null, $null)
$mcPF0 = $Sheet2.PivotTables("PivotTable1").PivotFields("NRPCType")
mcSetPivotField($mcPF0, $xlRowField, $null, $null, $null, $null, $null)
$mcPF1 = $Sheet2.PivotTables("PivotTable1").PivotFields("MachineOS")
mcSetPivotField($mcPF1, $xlRowField, $null, $null, $null, $null, $null)
$mcPF2 = $Sheet2.PivotTables("PivotTable1").PivotFields("DomainName")
mcSetPivotField($mcPF2, $xlRowField, $null, $null, $null, $null, $null)
$mcPF3 = $Sheet2.PivotTables("PivotTable1").PivotFields("Name")
mcSetPivotField($mcPF3, $xlRowField, $null, $null, $null, $null, $null)
$mcPF = $Sheet2.PivotTables("PivotTable1").PivotFields("EventTime")
mcSetPivotField($mcPF, $xlDataField, $mcNumberF, $null, $null, $null, "Event Count",1)
mcSetPivotTableFormat($Sheet2, "PivotTable1", 60, 15, $null, $null, $null, $null, $null,"NRPC Type", "1.OS,Domain,Client", $null, $null)
mcSortPivotFields($sheet2,$mcPF,$mcPF0)
mcSetPivotTableHeaderColor($Sheet2, "A")
$Sheet2.Cells.Item(1,1).Formula='Source DC'
#Write-Output ' Tab 1.NRPCType-OS,Domain,Client Done'
Write-Progress -Activity "Created Tab 1.NRPCType-OS,Domain,Client pivot table" -PercentComplete 60
Sleep $mcProgressBarDelay
#-------#Sheet3 - PivotTable2---------------------------------------------------------------
$Sheet3 = $mcWorkbooks.Worksheets.add()
$PivotTable2 = $mcWorkbooks.PivotCaches().Create(1,"Sheet1!R1C1:R$($Sheet1.UsedRange.Rows.count)C$($Sheet1.UsedRange.Columns.count)",5) # xlDatabase=1 xlPivotTableVersion15=5 Excel2013
$PivotTable2.CreatePivotTable("Sheet3!R1C1") | Out-Null
$mcPF00 = $Sheet3.PivotTables("PivotTable2").PivotFields("EventSource")
mcSetPivotField($mcPF00, $xlPageField, $null, $null, $null, $null, $null)
$mcPF0 = $Sheet3.PivotTables("PivotTable2").PivotFields("NRPCType")
mcSetPivotField($mcPF0, $xlRowField, $null, $null, $null, $null, $null)
$mcPF1 = $Sheet3.PivotTables("PivotTable2").PivotFields("DomainName")
mcSetPivotField($mcPF1, $xlRowField, $null, $null, $null, $null, $null)
$mcPF2 = $Sheet3.PivotTables("PivotTable2").PivotFields("Name")
mcSetPivotField($mcPF2, $xlRowField, $null, $null, $null, $null, $null)
$mcPF = $Sheet3.PivotTables("PivotTable2").PivotFields("EventTime")
mcSetPivotField($mcPF, $xlDataField, $mcNumberF, $null, $null, $null, "Event Count",1)
mcSetPivotTableFormat($Sheet3, "PivotTable2", 60, 15, $null, $null, $null, $null, $null,"NRPC Type", "2.Domain,Client", $null, $null)
mcSortPivotFields($Sheet3,$mcPF,$mcPF0)
mcSetPivotTableHeaderColor($Sheet3, "A")
$Sheet3.Cells.Item(1,1).Formula='Source DC'
#Write-Output ' Tab 2.NRPCType-Domain,Client Done'
Write-Progress -Activity "Created Tab 2.NRPCType-Domain,Client pivot table" -PercentComplete 90
Sleep $mcProgressBarDelay
#-------#$Sheet4 - $PivotTable3---------------------------------------------------------------
$Sheet4 = $mcWorkbooks.Worksheets.add()
$PivotTable3 = $mcWorkbooks.PivotCaches().Create(1,"Sheet1!R1C1:R$($Sheet1.UsedRange.Rows.count)C$($Sheet1.UsedRange.Columns.count)",5) # xlDatabase=1 xlPivotTableVersion15=5 Excel2013
$PivotTable3.CreatePivotTable("Sheet4!R1C1") | Out-Null
$Sheet4.name = "3.CustomPivot"
#Set Sort sheet names in reverse
$Sheet1.Name = "0.Raw RPC events"
$Sheet2.Tab.ColorIndex = $Sheet3.Tab.ColorIndex =35
$mcWorkSheetNames = New-Object System.Collections.ArrayList
foreach ($mcWorkSheet in $mcWorkbooks.Worksheets) { $mcWorkSheetNames.add($mcWorkSheet.Name) | Out-null }
$mctmp = $mcWorkSheetNames.Sort() | Out-Null
For ($i=0; $i -lt $mcWorkSheetNames.Count-1; $i++){ #Sort name.
$mcTmp = $mcWorkSheetNames[$i]
$mcBefore = $mcWorkbooks.Worksheets.Item($mcTmp)
$mcAfter = $mcWorkbooks.Worksheets.Item($i+1)
$mcBefore.Move($mcAfter)
}
$Sheet1.Activate()
Write-Progress -Activity "Creating Excel sheets" -PercentComplete 100
Sleep $mcProgressBarDelay
if ($mcScriptPrompts) { #SaveAsFile
$mcFileName = Read-Host "Enter a FileName to save extracted event 582 xlsx.`n"
if ($mcFileName) {
Write-Output "Saving file to $mcEvtPath\$mcFileName.xlsx"
$mcWorkbooks.SaveAs($mcEvtPath+'\'+$mcFileName)
}
$mcCleanup = Read-Host "Delete 582-*.CSV? ([Enter]/[Y] to delete, [N] to keep csv)`n"
if ($mcCleanup -ne 'N') {
Get-ChildItem -Path $mcEvtPath | Where {$_.name -clike '582-*.csv'} | foreach ($_) {
Remove-Item $mcEvtPath'\'$_
Write-Output " $_ deleted."
}
}
}
$mcExcel.visible = $true
} else { #end of mcFiles
Write-Output " No 582-*.csv found in specified $mcEvtPath."
}
}
Write-Output 'Script completed.'
