Yhteenveto
Tässä artikkelissa oleva komento sarja on kumppani tietoihin, jotka liittyvät siihen, miten voit hallita muutoksia, jotka liittyvät verkkonetlogon Secure Channel yhteydet-yhteyksiin, jotka liittyvät CVE-2020-1472. Se toimitetaan sellaisenaan.
Komento sarja käsittelee Tapahtumienvalvonnasta vietyjä EVTX-tiedostoja ja luo Microsoft Excel-laskenta taulukon, joka sisältää pivot-taulukot eri ongelmille ja ympäristön laitteille, jotka ovat käynnistäneet tapahtumat. Komento sarjaan vaaditaan PowerShell ja Microsoft Excel 2013 tai uudempi (64bit suositellaan suurille tieto joukoille).
Käyttö
Sinun on vietävä EVTX tiedostot toimi alue ohjaimista, joita seurataan KB4557222kuvattujen ongelmien varalta. Jos haluat tehdä tämän, Avaa Tapahtumienvalvonta valitsemalla Käynnistä, kirjoita Tapahtumienvalvonta ja valitsemalla se. Kun Tapahtumienvalvonta aukeaa, Laajenna Windowsin lokit, Napsauta hiiren kakkos painikkeella tai paina pitkään järjestelmän kohdalla ja valitse Tallenna kaikki tapahtumat nimellä... ja Tallenna tiedosto jonnekin sallimaan tiedoston käsittely.
Komento sarja voi käsitellä useampaa kuin yhtä EVTX tiedostoa kerrallaan, jos haluat. Suurten tieto joukkojen suorittaminen voi kestää kauan. On myös suositeltavaa EVTX , että tiedostot ovat paikallisesti samassa laitteessa, joka suorittaa komento sarjan, mikä nopeuttaa tiedostojen käsittelemistä.
Sinun on suoritettava komento sarja PowerShellin komento kehotteessa. Sitä ei tarvitse suorittaa järjestelmänvalvojana. Komento sarja suoritetaan kehotteiden kautta, ja voit vastata tarpeen mukaan, ellet ole määrittänyt sitä $mcScriptPrompts$false . Jos EVTX tiedostot ovat samassa kansiossa kuin komento sarja, sinun ei tarvitse antaa tiedostojen polkuja.
Skriptin mukauttaminen
|
Muuttuja |
Kuvaus |
| $mcScriptPrompts |
Arvot $true,$false Kuvaus Oletus arvo on $true ja edellyttää, että käyttäjä syöttää tai vaikuttaa syöttöään. Voi määrittää, $false onko EVTX tiedostot samassa kansiossa kuin komento sarja, ja kaikki muut asetukset suoritetaan oletusarvoisesti. |
| $mcMaxExport |
Oletus arvo: 50000 Kuvaus Kun komento sarja on oletus asetuksena, se lopettaa kunkin tiedoston käsittelyn, EVTX kun 50000 tapahtumia viedään CSV tiedostoihin. Jos saat Microsoft Excelistä muistiin liittyviä virheitä, sinun on laskettava tämä luku tai muutettava sitä, mitä tietoja käsitellään, esimerkiksi vaihtamalla $mcStartTime . |
| $mcMaxImport |
Oletus arvo: 50000 Kuvaus Kun komento sarja on oletus asetuksissa, se lopettaa tapahtumien käsittelyn nykyisen CSV-tiedoston käsittelyn jälkeen, jos se osuu tapahtumien maksimi määrään 50000. Tämä tarkoittaa sitä, että kun se osuu tapahtumien maksimi määrään, se viimeistelee nykyisen tiedoston, jonka CSV se on käynnistänyt, mutta ei Aloita uuden tiedoston käsittelemistä CSV . |
| $mcStartTime |
Oletus arvo: '2020/05/26 11:06' Kuvaus Tämän muuttujan avulla voit määrittää alkamis ajan, ja komento sarja käsittelee vain tapahtumia kyseisen päivä määrä-ja kellon ajan jälkeen. Jos sinulla on jo osoitettu laitteita tiettyyn pisteeseen asti, Tämä mahdollistaa vain sellaisten tapahtumien kohdentamiseen, joita et ole vielä käsitellyt. |
| $mcMaxThreads |
Oletus arvo: 4 Kuvaus Tämä muuttuja antaa mahdollisuuden suurentaa tai pienentää niiden säikeiden luku määrää, jotka ovat käytössä tiedostojen tuonnissa tiedostoista EVXTCSV . |
Komento sarja
Alla on PowerShell-komento sarja, jota voit käyttää ympäristön mukauttamisen jälkeen. Sinun on kopioitava ja liitettävä tämä komento sarja CVE-2020-1472EventReader.ps1 tiedostoon siinä laitteessa, jota käytät tapahtumien käsittelyyn.
# ---------------------------------
# CVE-2020-1472 Event Reader v1.0 8/4/2020
# This script will:
# 1. Scan system evtx in input file folder for event 5827, 5828,5829,5830 and 5831, exact data fields, export to 582#-*.CSV.
# 2. Calls Excel to import resulting 582#-*.CSV, create pivot tables for common secure RPC analysis scenarios. Delete 582#-*.CSV afterward.
# Feel free to modify to fit your need.
# ---------------------------------
# Script requires Excel 2013 or later.
# 64 bits Excel will allow creation of larger data import to XLS.
# ---------------------------------
# To use the script:
# 1. Save system log as system.evtx to file.
# 2. Follow on screen prompt to enter Path containing *.evtx and final xlsx.
#
# More info https://support.microsoft.com/kb/4557222
#---------------------------------------
#Script Globals/ Tuning variables.
#---------------------------------------
# - $mcScriptPrompts > when set to $false, script will process all evtx in the script file folder without prompting. Good for dropping evtx, right-click script to "Run with powershell"
# - $mcMaxExport > max events to export per EVTX, set to low number for quick sample/spot checks.
# - $mcMaxImport > max events to import into excel, script will finish current file and stop importing next file(s). Set to lower number if Excel is returning memory error during import.
# - $mcStartTime > Earliest event to export, in the form of 'yyyy/MM/dd HH:mm', where HH 13 is 1pm, example: '2017/05/26 13:01'. Use this to filter progress.
# - $mcMaxThreads > max number of evtx files to export at the same time. 4 default, set to 8 and experiment if you have fast SSD HDD.
#
# Script variables block, modify to fit your need ---------------------------------------------------------------------
$mcScriptPrompts = $True #Script default, $false for non-interactive input & output.
$mcMaxExport = 50000 #50000 Max events to export per each EVTX, modify this if we are getting Excel memory error (or we just need first few evt for samples)
$mcMaxImport = 50000 #50000 max events to import into excel, ##NOTE##: Once maxed out, script will finish current import file and stop future import(s).
$mcStartTime = '2020/05/26 11:06' #Earliest 582* event to export, in the form of 'yyyy/MM/dd HH:mm', where HH 13 is 1pm, example: '2020/05/26 11:06' will list events starting 05/26 11:06, use this to filter new events.
$mcMaxThreads = 4 #Max concurrent Evt to CSV export threads (jobs)
# Internal values init, do not modify -------------------------------------------------------------------------------------
$mcCSVImport = $true
$mcEvtPath = $null
$mcStartTime=[datetime]::ParseExact($mcStartTime,'yyyy/MM/dd HH:mm',$null) #Convert string to timestamp
$mcProgressBarDelay = 0 #Delay in seconds after each ProgressBar update
#----Functions--------------------------
Function mcSetPivotField($mcPivotFieldSetting) { #Set pivot field attributes per MSDN https://msdn.microsoft.com/en-us/library/office/ff820762.aspx
if ($mcPivotFieldSetting[1] -ne $null) { $mcPivotFieldSetting[0].Orientation = $mcPivotFieldSetting[1]} # 1 Orientation { $xlRowField | $xlDataField |$xlColumnField }, in XlPivotFieldOrientation
if ($mcPivotFieldSetting[2] -ne $null) { $mcPivotFieldSetting[0].NumberFormat = $mcPivotFieldSetting[2]} # 2 NumberFormat { $mcNumberF | $mcPercentF }
if ($mcPivotFieldSetting[3] -ne $null) { $mcPivotFieldSetting[0].Function = $mcPivotFieldSetting[3]} # 3 Function { $xlAverage | $xlSum | $xlCount }, in XlConsolidationFunction
if ($mcPivotFieldSetting[4] -ne $null) { $mcPivotFieldSetting[0].Calculation = $mcPivotFieldSetting[4]} # 4 Calculation { $xlPercentOfTotal | $xlPercentRunningTotal }, in XlPivotFieldCalculation
if ($mcPivotFieldSetting[5] -ne $null) { $mcPivotFieldSetting[0].BaseField = $mcPivotFieldSetting[5]} # 5 BaseField <String>
if ($mcPivotFieldSetting[6] -ne $null) { $mcPivotFieldSetting[0].Name = $mcPivotFieldSetting[6]} # 6 Name <String>
if ($mcPivotFieldSetting[7] -ne $null) { $mcPivotFieldSetting[0].Position = $mcPivotFieldSetting[7]} # 7 Position
}
Function mcSetPivotTableFormat($mcPivotTable) { # Set pivotTable cosmetics and sheet name
$mcPT=$mcPivotTable[0].PivotTables($mcPivotTable[1])
$mcPT.HasAutoFormat = $False #2.turn of AutoColumnWidth
for ($i=2; $i -lt 9; $i++) { #3. SetColumnWidth for Sheet($mcPivotTable[0]),PivotTable($mcPivotTable[1]),Column($mcPivotTable[2-8])
if ($mcPivotTable[$i] -ne $null) { $mcPivotTable[0].columns.item(($i-1)).columnWidth = $mcPivotTable[$i]}
}
$mcPivotTable[0].Application.ActiveWindow.SplitRow = 3
$mcPivotTable[0].Application.ActiveWindow.SplitColumn = 2
$mcPivotTable[0].Application.ActiveWindow.FreezePanes = $true #1.Freeze R1C1
$mcPivotTable[0].Cells.Item(1,1)="Filter"
$mcPivotTable[0].Cells.Item(3,1)=$mcPivotTable[9] #4 set TXT at R3C1 with PivotTableName$mcPivotTable[9]
$mcPivotTable[0].Name=$mcPivotTable[10] #5 Set Sheet Name to $mcPivotTable[10]
$mcRC = ($mcPivotTable[0].UsedRange.Cells).Rows.Count-1
if ($mcPivotTable[11] -ne $null) { # $mcPivotTable[11] Set ColorScale
$mColorScaleRange='$'+$mcPivotTable[11]+'$4:$'+$mcPivotTable[11]+'$'+$mcRC
[Void]$mcPivotTable[0].Range($mColorScaleRange).FormatConditions.AddColorScale(3) #$mcPivotTable[11]=ColorScale
$mcPivotTable[0].Range($mColorScaleRange).FormatConditions.item(1).ColorScaleCriteria.item(1).type = 1 #xlConditionValueLowestValue
$mcPivotTable[0].Range($mColorScaleRange).FormatConditions.item(1).ColorScaleCriteria.item(1).FormatColor.Color = 8109667
$mcPivotTable[0].Range($mColorScaleRange).FormatConditions.item(1).ColorScaleCriteria.item(2).FormatColor.Color = 8711167
$mcPivotTable[0].Range($mColorScaleRange).FormatConditions.item(1).ColorScaleCriteria.item(3).type = 2 #xlConditionValueHighestValue
$mcPivotTable[0].Range($mColorScaleRange).FormatConditions.item(1).ColorScaleCriteria.item(3).FormatColor.Color = 7039480
}
if ($mcPivotTable[12] -ne $null) { # $mcPivotTable[12] Set DataBar
$mcDataBarRange='$'+$mcPivotTable[12]+'$4:$'+$mcPivotTable[12]+'$'+$mcRC
[void]$mcPivotTable[0].Range($mcDataBarRange).FormatConditions.AddDatabar() #$mcPivotTable[12]:Set DataBar
}
}
Function mcSortPivotFields($mcPF) { #Sort on $mcPF and collapse later pivot fields
for ($i=2; $i -lt 5; $i++) { #collapse later pivot fields
if ($mcPF[$i] -ne $null) {
$mcPF[$i].showDetail = $false
}
}
[void]($mcPF[0].Cells.Item(4, 2)).sort(($mcPF[0].Cells.Item(4, 2)), 2)
[void]($mcPF[0].Cells.Item(4, 1)).sort(($mcPF[0].Cells.Item(4, 1)), 1)
}
Function mcSetPivotTableHeaderColor($mcSheet) { #Set PiviotTable Header Color for easier reading
for ($i=1; $i -lt 5; $i++) { #Set header(s) color
if ($mcSheet[$i] -ne $null) { $mcSheet[0].Range(($mcSheet[$i]+"3")).interior.Colorindex = 37 }
}
}
#----Main---------
#---- script info-------
$mcScriptPath = Split-Path ((Get-Variable MyInvocation -Scope 0).Value).MyCommand.Path
if ($mcScriptPrompts) { #Interactive mcScriptPrompts
$mcEvtPath = Read-Host "Enter local, mapped or UNC path to saved system evtx or previously generated 582-*.csv. Be sure to remove trailing blank. For Example (c:\EventData)`n Or press [Enter] if script is in the same file folder as evtx or csv.`n"
if ($mcEvtPath -eq '') { #If there is no Path entered, we will use the same file folder as script path.
$mcEvtPath= $mcScriptPath
Write-Output "No path entered, default to " $mcEvtPath
}
} else {
$mcEvtPath= $mcScriptPath #Non-interactive script uses script path for Event path
}
#---- Export evtx to CSV---------------------------------------------------
Write-Output 'Convert evtx to csv.'
$mcFiles = Get-ChildItem -Path $mcEvtPath | Where {$_.name -clike '*.evtx'}
ForEach ($mcFile in $mcFiles) { #Loop through *.evtx
$mcFile | Add-Member -MemberType NoteProperty -Name MaxEvents -force -Value $mcMaxExport
$mcFile | Add-Member -MemberType NoteProperty -Name StartTime -force -Value $mcStartTime
#Job [ #Job start code 1
Start-Job -ArgumentList (,$mcFile) -ScriptBlock { #Start-Job for reading each files
param ($mcFile)
#Job ]
Write-Output "Reading $mcFile"
$mc582s = Get-WinEvent -FilterHashtable @{Path=$mcfile.FullName; LogName="System"; Level=3,4; StartTime=$mcFile.StartTime; id=5827,5828,5829,5830,5831} -MaxEvents $mcFile.MaxEvents -ErrorAction SilentlyContinue
If ($mc582s -ne $null) {
$mcOutFile = $mcFile.DirectoryName+'\582-'+$mcFile.Name+'.csv'
Write-Output " Event 5826-28 found, generating $mcOutFile"
$mc582sOut = @() #Array for exporting CSV items
ForEach ($mc582 in $mc582s) {
$mcObject = New-Object System.Object
$mcObject | Add-Member -MemberType NoteProperty -Name EventSource -force -value $mc582.MachineName
$mcObject | Add-Member -MemberType NoteProperty -Name EventTime -force -value $mc582.TimeCreated
$mcObject | Add-Member -MemberType NoteProperty -Name EventID -force -value $mc582.ID
switch ($mc582.ID) {
5827 { #Denided Unsecure RPC machine client
$mcObject | Add-Member -MemberType NoteProperty -Name NRPCType -force -value '2 - Denied Unsecure NRPC Evt:5827,5828'
$mcObject | Add-Member -MemberType NoteProperty -Name Name -force -value $mc582.Properties[0].value
$mcObject | Add-Member -MemberType NoteProperty -Name DomainName -force -value $mc582.Properties[1].value
$mcObject | Add-Member -MemberType NoteProperty -Name AccountType -force -value $mc582.Properties[2].value
$mcObject | Add-Member -MemberType NoteProperty -Name MachineOS -force -value $mc582.Properties[3].value
$mcObject | Add-Member -MemberType NoteProperty -Name MachineOsBuild -force -value $mc582.Properties[4].value
$mcObject | Add-Member -MemberType NoteProperty -Name MachineOsServicePack -force -value $mc582.Properties[5].value
}
5829 { #Temp Allowed Unsecure RPC machine client
$mcObject | Add-Member -MemberType NoteProperty -Name NRPCType -force -value '1 - TempAllowed Unsecure NRPC Evt:5829'
$mcObject | Add-Member -MemberType NoteProperty -Name Name -force -value $mc582.Properties[0].value
$mcObject | Add-Member -MemberType NoteProperty -Name DomainName -force -value $mc582.Properties[1].value
$mcObject | Add-Member -MemberType NoteProperty -Name AccountType -force -value $mc582.Properties[2].value
$mcObject | Add-Member -MemberType NoteProperty -Name MachineOS -force -value $mc582.Properties[3].value
$mcObject | Add-Member -MemberType NoteProperty -Name MachineOsBuild -force -value $mc582.Properties[4].value
$mcObject | Add-Member -MemberType NoteProperty -Name MachineOsServicePack -force -value $mc582.Properties[5].value
}
5830 { #Allowed Unsecure RPC machine client
$mcObject | Add-Member -MemberType NoteProperty -Name NRPCType -force -value '3 - Allowed Unsecure NRPC Evt:5830,5831'
$mcObject | Add-Member -MemberType NoteProperty -Name Name -force -value $mc582.Properties[0].value
$mcObject | Add-Member -MemberType NoteProperty -Name DomainName -force -value $mc582.Properties[1].value
$mcObject | Add-Member -MemberType NoteProperty -Name AccountType -force -value $mc582.Properties[2].value
$mcObject | Add-Member -MemberType NoteProperty -Name MachineOS -force -value $mc582.Properties[3].value
$mcObject | Add-Member -MemberType NoteProperty -Name MachineOsBuild -force -value $mc582.Properties[4].value
$mcObject | Add-Member -MemberType NoteProperty -Name MachineOsServicePack -force -value $mc582.Properties[5].value
}
5828 { #Temp Allowed Unsecure RPC trust
$mcObject | Add-Member -MemberType NoteProperty -Name NRPCType -force -value '2 - Denied Unsecure NRPC Evt:5827,5828'
$mcObject | Add-Member -MemberType NoteProperty -Name Name -force -value $mc582.Properties[1].value
$mcObject | Add-Member -MemberType NoteProperty -Name DomainName -force -value $mc582.Properties[2].value
$mcObject | Add-Member -MemberType NoteProperty -Name AccountType -force -value $mc582.Properties[0].value
$mcObject | Add-Member -MemberType NoteProperty -Name MachineOS -force -value 'Domain Trust'
$mcObject | Add-Member -MemberType NoteProperty -Name MachineOsBuild -force -value 'N/A'
$mcObject | Add-Member -MemberType NoteProperty -Name MachineOsServicePack -force -value 'N/A'
}
5831 { #Allowed Unsecure RPC trust
$mcObject | Add-Member -MemberType NoteProperty -Name NRPCType -force -value '3 - Allowed Unsecure NRPC Evt:5830,5831'
$mcObject | Add-Member -MemberType NoteProperty -Name Name -force -value $mc582.Properties[1].value
$mcObject | Add-Member -MemberType NoteProperty -Name DomainName -force -value $mc582.Properties[2].value
$mcObject | Add-Member -MemberType NoteProperty -Name AccountType -force -value $mc582.Properties[0].value
$mcObject | Add-Member -MemberType NoteProperty -Name MachineOS -force -value 'Domain Trust'
$mcObject | Add-Member -MemberType NoteProperty -Name MachineOsBuild -force -value 'N/A'
$mcObject | Add-Member -MemberType NoteProperty -Name MachineOsServicePack -force -value 'N/A'
}
}
$mcObject.Name = $mcObject.Name.Trim()
$mcObject.DomainName = $mcObject.DomainName.Trim()
$mcObject.AccountType = $mcObject.AccountType.Trim()
$mcObject.MachineOS = $mcObject.MachineOS.Trim()
$mcObject.MachineOsBuild = $mcObject.MachineOsBuild.Trim()
$mcObject.MachineOsServicePack = $mcObject.MachineOsServicePack.Trim()
$mc582sOut += $mcObject
}
$mc582sout | ConvertTo-Csv -NoTypeInformation | Out-File $mcOutFile
}
#Job [ # Maxthread code 2/3
} | Out-Null #Job output
Write-Output " Processing: $mcFile"
While((Get-Job -State 'Running').Count -ge $mcMaxThreads) { Start-Sleep -Milliseconds 10 } # Pause, only run $mcMaxThreads number of jobs.
#Job ]
}
#Job [ # Job clean out code 3/3
While((Get-Job -State 'Running').Count -gt 0) {
Write-Progress -Activity "Exporting evtx" -PercentComplete ((($mcfiles.Count-(Get-Job -State 'Running').Count)/$mcfiles.Count)*100)
Start-Sleep -Milliseconds 10
} # wait for last job to complete
#Get-Job | Receive-Job
Get-Job -State Completed | Remove-Job
#Job ]
#---- Import csv to excel-----------------------------------------------------
if ($mcCSVImport -eq $true) { #Debug only, perforem CSV to Excel import
$mcFiles = Get-ChildItem -Path $mcEvtPath | Where {$_.name -clike '582-*.csv'}
If ($mcFiles -ne $null) { #Create a new Excel workbook if there are CSV in directory.
cd $mcEvtPath #for Import-Csv to read all files.
$mcObject = Import-Csv $mcfiles -Delimiter ','
cd $mcScriptPath #Back to script path
#Write-Output 'Import csv to excel.'
$mcExcel = New-Object -ComObject excel.application
$mcWorkbooks = $mcExcel.Workbooks.Add()
$Sheet1 = $mcWorkbooks.worksheets.Item(1)
$mcCurrentRow = $mcFileProcessed = 1
ForEach ($mcFile in $mcFiles) { #Define Excel TXT connector and import/append
Write-Progress -Activity "Importing $mcFile" -PercentComplete (($mcFileProcessed/$mcfiles.Count)*100)
Sleep $mcProgressBarDelay
$mcFileProcessed=$mcFileProcessed+1
if ($mcCurrentRow -le $mcMaxImport){ #Import only up to $mcMaxImport number of records.
$mcConnector = $Sheet1.QueryTables.add(("TEXT;" + $mcEvtPath+'\'+$mcFile),$Sheet1.Range(('a'+($mcCurrentRow))))
$Sheet1.QueryTables.item($mcConnector.name).TextFileCommaDelimiter = $True
$Sheet1.QueryTables.item($mcConnector.name).TextFileParseType = 1
[void]$Sheet1.QueryTables.item($mcConnector.name).Refresh()
if ($mcCurrentRow -ne 1) { [void]($Sheet1.Cells.Item($mcCurrentRow,1).entireRow).delete()} # Delete header on 2nd and later CSV.
$mcCurrentRow = $Sheet1.UsedRange.EntireRow.Count+1
} else {
Write-Output " *** Max [ $mcMaxImport ] import events reached, skipping: $mcfile"
}
}
#---- Customize XLS, Excel Globals--------------------------------------------------------
#Write-Output 'Customizing XLS.' #https://msdn.microsoft.com/en-us/library/bb241425(v=office.12).aspx, https://msdn.microsoft.com/en-us/library/office/ff838592.aspx
$xlRowField = 1 #XlPivotFieldOrientation
$xlPageField = 3 #XlPivotFieldOrientation
$xlDataField = 4 #XlPivotFieldOrientation
$xlColumnField = 2 #XlPivotFieldOrientation
$xlAverage = -4106 #XlConsolidationFunction
$xlSum = -4157 #XlConsolidationFunction
$xlCount = -4112 #XlConsolidationFunction
$xlPercentOfTotal = 8 #XlPivotFieldCalculation
$xlPercentRunningTotal = 13 #XlPivotFieldCalculation
$mcNumberF = "###,###,###,###,###"
$mcPercentF = "#0.00%"
$mcDateF = "yyyy/m/d h:mm"
$mcDateGroupFlags=($false, $false, $true, $true, $true, $false, $false) # Months, Days, Hours, https://msdn.microsoft.com/en-us/library/office/ff839808.aspx
#-------#Sheet1 - RawData---------------------------------------------------------------
$Sheet1.Range("A1").Autofilter() | Out-Null
$Sheet1.Application.ActiveWindow.SplitRow = 1
$Sheet1.Application.ActiveWindow.FreezePanes = $true
#Write-Output 'Tab 0.5826, 5827, 5828 events imported'
Write-Progress -Activity "Created 0.Raw RPC events Tab" -PercentComplete 30
Sleep $mcProgressBarDelay
#-------#Sheet2 - PivotTable1---------------------------------------------------------------
$Sheet2 = $mcWorkbooks.Worksheets.add()
$PivotTable1 = $mcWorkbooks.PivotCaches().Create(1,"Sheet1!R1C1:R$($Sheet1.UsedRange.Rows.count)C$($Sheet1.UsedRange.Columns.count)",5) # xlDatabase=1 xlPivotTableVersion15=5 Excel2013
$PivotTable1.CreatePivotTable("Sheet2!R1C1") | Out-Null
$mcPF00 = $Sheet2.PivotTables("PivotTable1").PivotFields("EventSource")
mcSetPivotField($mcPF00, $xlPageField, $null, $null, $null, $null, $null)
$mcPF0 = $Sheet2.PivotTables("PivotTable1").PivotFields("NRPCType")
mcSetPivotField($mcPF0, $xlRowField, $null, $null, $null, $null, $null)
$mcPF1 = $Sheet2.PivotTables("PivotTable1").PivotFields("MachineOS")
mcSetPivotField($mcPF1, $xlRowField, $null, $null, $null, $null, $null)
$mcPF2 = $Sheet2.PivotTables("PivotTable1").PivotFields("DomainName")
mcSetPivotField($mcPF2, $xlRowField, $null, $null, $null, $null, $null)
$mcPF3 = $Sheet2.PivotTables("PivotTable1").PivotFields("Name")
mcSetPivotField($mcPF3, $xlRowField, $null, $null, $null, $null, $null)
$mcPF = $Sheet2.PivotTables("PivotTable1").PivotFields("EventTime")
mcSetPivotField($mcPF, $xlDataField, $mcNumberF, $null, $null, $null, "Event Count",1)
mcSetPivotTableFormat($Sheet2, "PivotTable1", 60, 15, $null, $null, $null, $null, $null,"NRPC Type", "1.OS,Domain,Client", $null, $null)
mcSortPivotFields($sheet2,$mcPF,$mcPF0)
mcSetPivotTableHeaderColor($Sheet2, "A")
$Sheet2.Cells.Item(1,1).Formula='Source DC'
#Write-Output ' Tab 1.NRPCType-OS,Domain,Client Done'
Write-Progress -Activity "Created Tab 1.NRPCType-OS,Domain,Client pivot table" -PercentComplete 60
Sleep $mcProgressBarDelay
#-------#Sheet3 - PivotTable2---------------------------------------------------------------
$Sheet3 = $mcWorkbooks.Worksheets.add()
$PivotTable2 = $mcWorkbooks.PivotCaches().Create(1,"Sheet1!R1C1:R$($Sheet1.UsedRange.Rows.count)C$($Sheet1.UsedRange.Columns.count)",5) # xlDatabase=1 xlPivotTableVersion15=5 Excel2013
$PivotTable2.CreatePivotTable("Sheet3!R1C1") | Out-Null
$mcPF00 = $Sheet3.PivotTables("PivotTable2").PivotFields("EventSource")
mcSetPivotField($mcPF00, $xlPageField, $null, $null, $null, $null, $null)
$mcPF0 = $Sheet3.PivotTables("PivotTable2").PivotFields("NRPCType")
mcSetPivotField($mcPF0, $xlRowField, $null, $null, $null, $null, $null)
$mcPF1 = $Sheet3.PivotTables("PivotTable2").PivotFields("DomainName")
mcSetPivotField($mcPF1, $xlRowField, $null, $null, $null, $null, $null)
$mcPF2 = $Sheet3.PivotTables("PivotTable2").PivotFields("Name")
mcSetPivotField($mcPF2, $xlRowField, $null, $null, $null, $null, $null)
$mcPF = $Sheet3.PivotTables("PivotTable2").PivotFields("EventTime")
mcSetPivotField($mcPF, $xlDataField, $mcNumberF, $null, $null, $null, "Event Count",1)
mcSetPivotTableFormat($Sheet3, "PivotTable2", 60, 15, $null, $null, $null, $null, $null,"NRPC Type", "2.Domain,Client", $null, $null)
mcSortPivotFields($Sheet3,$mcPF,$mcPF0)
mcSetPivotTableHeaderColor($Sheet3, "A")
$Sheet3.Cells.Item(1,1).Formula='Source DC'
#Write-Output ' Tab 2.NRPCType-Domain,Client Done'
Write-Progress -Activity "Created Tab 2.NRPCType-Domain,Client pivot table" -PercentComplete 90
Sleep $mcProgressBarDelay
#-------#$Sheet4 - $PivotTable3---------------------------------------------------------------
$Sheet4 = $mcWorkbooks.Worksheets.add()
$PivotTable3 = $mcWorkbooks.PivotCaches().Create(1,"Sheet1!R1C1:R$($Sheet1.UsedRange.Rows.count)C$($Sheet1.UsedRange.Columns.count)",5) # xlDatabase=1 xlPivotTableVersion15=5 Excel2013
$PivotTable3.CreatePivotTable("Sheet4!R1C1") | Out-Null
$Sheet4.name = "3.CustomPivot"
#Set Sort sheet names in reverse
$Sheet1.Name = "0.Raw RPC events"
$Sheet2.Tab.ColorIndex = $Sheet3.Tab.ColorIndex =35
$mcWorkSheetNames = New-Object System.Collections.ArrayList
foreach ($mcWorkSheet in $mcWorkbooks.Worksheets) { $mcWorkSheetNames.add($mcWorkSheet.Name) | Out-null }
$mctmp = $mcWorkSheetNames.Sort() | Out-Null
For ($i=0; $i -lt $mcWorkSheetNames.Count-1; $i++){ #Sort name.
$mcTmp = $mcWorkSheetNames[$i]
$mcBefore = $mcWorkbooks.Worksheets.Item($mcTmp)
$mcAfter = $mcWorkbooks.Worksheets.Item($i+1)
$mcBefore.Move($mcAfter)
}
$Sheet1.Activate()
Write-Progress -Activity "Creating Excel sheets" -PercentComplete 100
Sleep $mcProgressBarDelay
if ($mcScriptPrompts) { #SaveAsFile
$mcFileName = Read-Host "Enter a FileName to save extracted event 582 xlsx.`n"
if ($mcFileName) {
Write-Output "Saving file to $mcEvtPath\$mcFileName.xlsx"
$mcWorkbooks.SaveAs($mcEvtPath+'\'+$mcFileName)
}
$mcCleanup = Read-Host "Delete 582-*.CSV? ([Enter]/[Y] to delete, [N] to keep csv)`n"
if ($mcCleanup -ne 'N') {
Get-ChildItem -Path $mcEvtPath | Where {$_.name -clike '582-*.csv'} | foreach ($_) {
Remove-Item $mcEvtPath'\'$_
Write-Output " $_ deleted."
}
}
}
$mcExcel.visible = $true
} else { #end of mcFiles
Write-Output " No 582-*.csv found in specified $mcEvtPath."
}
}
Write-Output 'Script completed.'
