Les problèmes suivants se produit :
-
Les valeurs de base et le montant sont arrondies.
-
Le nombre total de lignes sont incorrect et génère le message d’erreur suivant lorsque vous essayez d’envoyer le fichier sur la page à :
60201201 777777777
Suivez les étapes décrites dans la section modifications du code pour résoudre ce problème. Ce problème se produit dans les produits suivants :
-
La version portugaise de Microsoft Dynamics NAV 2009 R2
-
La version portugaise de Microsoft Dynamics NAV 2009 Service Pack 1 (SP1)
Résolution
Informations sur le correctif
Un correctif pris en charge est désormais disponible auprès de Microsoft. Toutefois, il est conçu uniquement pour corriger le problème décrit dans cet article. Il s’applique uniquement aux systèmes rencontrant ce problème spécifique. Ce correctif peut subir des tests supplémentaires. Par conséquent, si vous n’êtes pas sérieusement concerné par ce problème, nous vous recommandons d’attendre le prochain service pack Microsoft Dynamics NAV 2009 ou la prochaine version de Microsoft Dynamics NAV qui comprendra ce correctif.
Remarque Dans certains cas, les frais généralement encourus pour la prise en charge des appels peuvent être annulés si un technicien du Support technique pour Microsoft Dynamics et les produits associés détermine qu’une mise à jour spécifique peut résoudre votre problème. Les coûts habituels du support technique s’appliqueront aux autres questions et problèmes qui ne relèvent pas de la mise à jour spécifique en question.
Informations sur l’installation
Microsoft fournit des exemples de programmation à titre d'illustration uniquement, sans garantie expresse ou implicite. Ceci inclut, mais n'est pas limité à, les garanties implicites de qualité marchande ou d'adéquation à un usage particulier. Cet article suppose que vous êtes familiarisé avec le langage de programmation présenté et les outils utilisés pour créer et déboguer des procédures. Les ingénieurs du support technique Microsoft peuvent aider à expliquer la fonctionnalité d'une procédure particulière. Toutefois, ils ne modifieront pas ces exemples pour fournir des fonctionnalités supplémentaires ou créer des procédures répondant à vos besoins spécifiques.
Remarque Avant d’installer ce correctif, vérifiez que tous les utilisateurs du client Microsoft Dynamics NAV sont déconnectés sur le système. Ceci comprend les services de Microsoft Dynamics NAV Application Server (NAS). Vous devez être le seul utilisateur client connecté lors de l’implémentation de ce correctif.
Pour appliquer ce correctif, vous devez posséder une licence développeur.
Il est recommandé que le compte d’utilisateur dans la fenêtre Logins Windows ou dans la fenêtre Logins base de données est affecté à l’ID de rôle « SUPER ». Si le compte d’utilisateur ne peut pas être affecté à l’ID de rôle « SUPER », vous devez vérifier que le compte d’utilisateur dispose des autorisations suivantes :
-
L’autorisation de modification pour l’objet que vous allez modifier.
-
L’autorisation d’exécution pour l’objet ID objet système 5210 et pour l' ID objet système 9015
objet.
Remarque Vous n’êtes pas obligé de disposer des droits pour les banques de données excepté si vous devez réparer des données.
Modifications du code
Remarque Toujours tester le code des correctifs dans un environnement contrôlé, avant d'appliquer les correctifs à vos ordinateurs de production.
Pour résoudre ce problème, procédez comme suit :
-
Modifiez le code dans la fonction InsertECDeclarationTrailer dans la table de la mémoire tampon du fichier rapport TVA (13380) comme suit :
Existant de co de...BEGIN
NewLine;
//NAVPTL005.001,o InsertIntegerValue (89, 2);
// Delete the following line.
InsertIntegerValue (98, 2); //NAVPTL005.001,n
InsertIntegerValue (LineNumber, 9);
PadLinetill134Characters(Blank);
END;
...Code de remplacement
...BEGIN
NewLine;
//NAVPTL005.001,o InsertIntegerValue (89, 2);
// Add the following lines.
//PT355807,o InsertIntegerValue (98, 2); //NAVPTL005.001,n
InsertIntegerValue (89, 2); //PT355807,n
// End of the added lines.
InsertIntegerValue (LineNumber, 9);
PadLinetill134Characters(Blank);
END;
... -
Modifiez le code dans la fonction InsertAnnex4041CustomerLine dans la table de la mémoire tampon du fichier rapport TVA (13380) comme suit :
Code existant...InsertIntegerValue (pLineNumber, 5);
InsertTextValue (pVATAnnexSetup."Tax Authority Code",2,Blank);
InsertTextValue (pVATRegNo, 9,Blank);
// Delete the following lines.
InsertIntegerValue(ABS(ROUND(pVATEntry.Base,1,'<')*100),12);
InsertIntegerValue(ABS(ROUND(pVATEntry.Amount,1,'<')*100),12);
// End of the deleted lines.
InsertTextValue (Blank,92,Blank);
END;
...Code de remplacement
...InsertIntegerValue (pLineNumber, 5);
InsertTextValue (pVATAnnexSetup."Tax Authority Code",2,Blank);
InsertTextValue (pVATRegNo, 9,Blank);
// Add the following lines.
//PT355807,o InsertIntegerValue(ABS(ROUND(pVATEntry.Base,1,'<')*100),12);
//PT355807,o InsertIntegerValue(ABS(ROUND(pVATEntry.Amount,1,'<')*100),12);
InsertIntegerValue(ABS(ROUND(pVATEntry.Base*100,1,'<')),12); //PT355807,n
InsertIntegerValue(ABS(ROUND(pVATEntry.Amount*100,1,'<')),12); //PT355807,n
// End of the added lines.
InsertTextValue (Blank,92,Blank);
END;
... -
Modifiez le code dans la fonction InsertAnnex4041DocumentLine dans la table de la mémoire tampon du fichier rapport TVA (13380) comme suit :
Code existant...InsertIntegerValue (pLineNumber, 5);
InsertTextValue (pVATAnnexSetup."Tax Authority Code",2,Blank);
InsertTextValue(pDocNo,13,Blank);
// Delete the following line.
InsertIntegerValue(ABS(ROUND(pVATEntry.Amount,1,'<')*100),12);
InsertTextValue (Blank,100,Blank);
END;
...Code de remplacement
...InsertIntegerValue (pLineNumber, 5);
InsertTextValue (pVATAnnexSetup."Tax Authority Code",2,Blank);
InsertTextValue(pDocNo,13,Blank);
// Add the following lines.
//PT355807,o InsertIntegerValue(ABS(ROUND(pVATEntry.Amount,1,'<')*100),12);
InsertIntegerValue(ABS(ROUND(pVATEntry.Amount*100,1,'<')),12); //PT355807,n
// End of the added lines.
InsertTextValue (Blank,100,Blank);
END;
... -
Modifiez le code dans la fonction InsertAnnex4041ReasonLine dans la table de la mémoire tampon du fichier rapport TVA (13380) comme suit :
Code existant 1...InsertTextValue (Blank,100,Blank);
END;
// Delete the following lines.
PROCEDURE InsertAnnex4041ReasonLine@1000000003(pVATAnnexSetup@1000000000 : Record 13386;pVATEntry@1000000003 : Record 254);
BEGIN
NewLine;
InsertTextValue (pVATAnnexSetup."Record Type",2,Blank);
IF pVATAnnexSetup.Frame = pVATAnnexSetup.Frame::"2" THEN BEGIN
InsertIntegerValue(ABS(ROUND(pVATEntry.Base,1,'<')*100),12);
InsertIntegerValue(ABS(ROUND(pVATEntry.Amount,1,'<')*100),12);
InsertTextValue (Blank,50,Blank);
// End of the deleted lines.
END;
IF pVATAnnexSetup.Frame = pVATAnnexSetup.Frame::"3" THEN BEGIN
...Code de substitution 1
...InsertTextValue (Blank,100,Blank);
END;
// Add the following lines.
PROCEDURE InsertAnnex4041ReasonLine@1000000003(pVATAnnexSetup@1000000000 : Record 13386;pVATEntry@1000000003 : Record 254;LineNo@1000000001 : Integer);
BEGIN
//PT355807,o NewLine;
//PT355807,o InsertTextValue (pVATAnnexSetup."Record Type",2,Blank);
IF pVATAnnexSetup.Frame = pVATAnnexSetup.Frame::"2" THEN BEGIN
//PT355807,o InsertIntegerValue(ABS(ROUND(pVATEntry.Base,1,'<')*100),12);
//PT355807,o InsertIntegerValue(ABS(ROUND(pVATEntry.Amount,1,'<')*100),12);
//PT355807,o InsertTextValue (Blank,50,Blank);
//PT355807,sn
IF (pVATAnnexSetup.SubSection = 'a') OR (pVATAnnexSetup.SubSection = '') THEN BEGIN
NewLine;
InsertTextValue (pVATAnnexSetup."Record Type",2,Blank);
END;
IF (pVATAnnexSetup.SubSection = 'b') AND (LineNo=1) THEN BEGIN
NewLine;
InsertTextValue (pVATAnnexSetup."Record Type",2,Blank);
InsertIntegerValue(0,24);
END;
InsertIntegerValue(ABS(ROUND(pVATEntry.Base*100,1,'<')),12);
InsertIntegerValue(ABS(ROUND(pVATEntry.Amount*100,1,'<')),12);
//PT355807,en
// End of the added lines.
END;
IF pVATAnnexSetup.Frame = pVATAnnexSetup.Frame::"3" THEN BEGIN
...Code existant 2
...IF pVATAnnexSetup.Frame = pVATAnnexSetup.Frame::"3" THEN BEGIN
IF (pVATAnnexSetup.SubSection = 'a') OR (pVATAnnexSetup.SubSection = 'A') THEN BEGIN
// Delete the following lines.
InsertIntegerValue(ABS(ROUND(pVATEntry.Base,1,'<')*100),12);
InsertIntegerValue(ABS(ROUND(pVATEntry.Amount,1,'<')*100),12);
END;
IF (pVATAnnexSetup.SubSection = 'b') OR (pVATAnnexSetup.SubSection = 'B') THEN BEGIN
InsertIntegerValue(ABS(ROUND(pVATEntry.Base,1,'<')*100),12);
InsertIntegerValue(ABS(ROUND(pVATEntry.Amount,1,'<')*100),12);
// End of the deleted lines.
END;
END;
...Code de substitution 2
...IF pVATAnnexSetup.Frame = pVATAnnexSetup.Frame::"3" THEN BEGIN
IF (pVATAnnexSetup.SubSection = 'a') OR (pVATAnnexSetup.SubSection = 'A') THEN BEGIN
// Add the following lines.
//PT355807,o InsertIntegerValue(ABS(ROUND(pVATEntry.Base,1,'<')*100),12);
//PT355807,o InsertIntegerValue(ABS(ROUND(pVATEntry.Amount,1,'<')*100),12);
//PT355807,sn
IF (LineNo=1) THEN BEGIN
NewLine;
InsertTextValue (pVATAnnexSetup."Record Type",2,Blank);
InsertIntegerValue(0,24);
END;
InsertIntegerValue(ABS(ROUND(pVATEntry.Base*100,1,'<')),12);
InsertIntegerValue(ABS(ROUND(pVATEntry.Amount*100,1,'<')),12);
//PT355807,en
END;
IF (pVATAnnexSetup.SubSection = 'b') OR (pVATAnnexSetup.SubSection = 'B') THEN BEGIN
//PT355807,o InsertIntegerValue(ABS(ROUND(pVATEntry.Base,1,'<')*100),12);
//PT355807,o InsertIntegerValue(ABS(ROUND(pVATEntry.Amount,1,'<')*100),12);
//PT355807,sn
IF (LineNo=1) THEN BEGIN
NewLine;
InsertTextValue (pVATAnnexSetup."Record Type",2,Blank);
InsertIntegerValue(0,48);
END;
InsertIntegerValue(ABS(ROUND(pVATEntry.Base*100,1,'<')),12);
InsertIntegerValue(ABS(ROUND(pVATEntry.Amount*100,1,'<')),12);
//PT355807,en
// End of the added lines.
END;
END;
...Code existant 3
...END;
END;
// Delete the following lines.
InsertTextValue (Blank,48,Blank);;
END;
PROCEDURE LastVATAnnex40Line@1000000006(pVATregNo@1000000000 : Text[9];pResumes@1000000001 : ARRAY [10] OF Integer);
BEGIN
// End of the deleted lines.
NewLine;
InsertTextValue ('96',2,Blank);
InsertIntegerValue (1, 5);
...Code de substitution 3
...END;
END;
// Add the following lines.
//PT355807,o InsertTextValue (Blank,48,Blank);
END;
PROCEDURE LastVATAnnex40Line@1000000006(pTotalAmount@1000000002 : Decimal;pVATregNo@1000000000 : Text[9];pResumes@1000000001 : ARRAY [10] OF Integer);
BEGIN
//PT355807,o NewLine;
InsertIntegerValue(ABS(ROUND(pTotalAmount*100,1,'<')),12);
InsertTextValue (Blank,48,Blank);
InsertVAT40LastLine(24);
// End of the added lines.
NewLine;
InsertTextValue ('96',2,Blank);
InsertIntegerValue (1, 5);
... -
Modifiez le code dans la fonction LastVATAnnex40Line dans la table de la mémoire tampon du fichier rapport TVA (13380) comme suit :
Code existant 1...InsertTextValue (Blank,118,Blank);
NewLine;
InsertTextValue ('69',2,Blank);
// Delete the following line.
InsertIntegerValue (pResumes[1], 5);
InsertIntegerValue (pResumes[2], 5);
InsertIntegerValue (pResumes[3], 5);
InsertIntegerValue (pResumes[4], 5);
...Code de substitution 1
...InsertTextValue (Blank,118,Blank);
NewLine;
InsertTextValue ('69',2,Blank);
// Add the following line.
//PT355807,o InsertIntegerValue (pResumes[1], 5);
InsertIntegerValue (pResumes[2], 5);
InsertIntegerValue (pResumes[3], 5);
InsertIntegerValue (pResumes[4], 5);
...Code existant 2
...InsertIntegerValue (pResumes[7], 5);
InsertIntegerValue (pResumes[8], 5);
InsertIntegerValue (1, 5);
END;
PROCEDURE LastVATAnnex41Line@1000000004(pVATAnnexSetup@1000000001 : Record 13386;pTotalAmount@1000000000 : Decimal;pResumes@1000000002 : ARRAY [10] OF Integer);
...Code de substitution 2
...InsertIntegerValue (pResumes[7], 5);
InsertIntegerValue (pResumes[8], 5);
InsertIntegerValue (1, 5);
// Add the following line.
InsertTextValue (Blank,94,Blank); //PT355807,n
END;
PROCEDURE LastVATAnnex41Line@1000000004(pVATAnnexSetup@1000000001 : Record 13386;pTotalAmount@1000000000 : Decimal;pResumes@1000000002 : ARRAY [10] OF Integer);
... -
Modifiez le code dans la fonction LastVATAnnex41Line dans la table de la mémoire tampon du fichier rapport TVA (13380) comme suit :
Code existant 1...PROCEDURE LastVATAnnex41Line@1000000004(pVATAnnexSetup@1000000001 : Record 13386;pTotalAmount@1000000000 : Decimal;pResumes@1000000002 : ARRAY [10] OF Integer);
BEGIN
// Delete the following lines.
NewLine;
InsertTextValue (pVATAnnexSetup."Record Type",2,Blank);
InsertIntegerValue(ABS(ROUND(pTotalAmount,1,'<')*100),12);
NewLine;
InsertTextValue ('89',2,Blank);
InsertIntegerValue (pResumes[1], 5);
// End of the deleted lines.
InsertIntegerValue (pResumes[2], 5);
InsertIntegerValue (pResumes[3], 5);
InsertIntegerValue (pResumes[4], 5);
...Code de substitution 1
...PROCEDURE LastVATAnnex41Line@1000000004(pVATAnnexSetup@1000000001 : Record 13386;pTotalAmount@1000000000 : Decimal;pResumes@1000000002 : ARRAY [10] OF Integer);
BEGIN
// Add the following lines.
//PT355807,o NewLine;
//PT355807,o InsertTextValue (pVATAnnexSetup."Record Type",2,Blank);
InsertIntegerValue(ABS(ROUND(pTotalAmount*100,1,'<')),12);
InsertTextValue (Blank,72,Blank);
InsertVAT41LastLine(24);
NewLine;
InsertTextValue ('89',2,Blank);
//PT355807,o InsertIntegerValue (pResumes[1], 5);
// End of the added lines.
InsertIntegerValue (pResumes[2], 5);
InsertIntegerValue (pResumes[3], 5);
InsertIntegerValue (pResumes[4], 5);
...Code existant 2
...InsertIntegerValue (pResumes[4], 5);
InsertIntegerValue (pResumes[5], 5);
InsertIntegerValue (pResumes[6], 5);
END;
BEGIN
...Code de substitution 2
...InsertIntegerValue (pResumes[4], 5);
InsertIntegerValue (pResumes[5], 5);
InsertIntegerValue (pResumes[6], 5);
// Add the following lines.
InsertIntegerValue (pResumes[7], 5); //PT355807,n
InsertTextValue (Blank,104,Blank); //PT355807,n
END;
PROCEDURE InsertVAT40LastLine@1000000005(Size@1000000000 : Integer);
BEGIN
//PT355807,sn
FIND('+');
IF STRLEN("Line Value") <> 134 THEN BEGIN
"Line Value" := COPYSTR("Line Value",1,50) + CONVERTSTR (FORMAT (0, Size, 0), Blank, HeadingZero) + COPYSTR("Line Value",51);
MODIFY;
END;
//PT355807,en
END;
PROCEDURE InsertVAT41LastLine@1000000007(Size@1000000000 : Integer);
BEGIN
//PT355807,sn
FIND('+');
IF STRLEN("Line Value") <> 134 THEN BEGIN
"Line Value" := COPYSTR("Line Value",1,26) + CONVERTSTR (FORMAT (0, Size, 0), Blank, HeadingZero) + COPYSTR("Line Value",27);
MODIFY;
END;
//PT355807,en
END;
PROCEDURE LastVATAnnex40Line2@1000000009(pVATAnnexSetup@1000000003 : Record 13386;pTotalAmount@1000000002 : Decimal;pVATregNo@1000000000 : Text[9];pResumes@1000000001 : ARRAY [10] OF Integer);
BEGIN
//PT355807,sn
NewLine;
InsertTextValue (pVATAnnexSetup."Record Type",2,Blank);
InsertIntegerValue(0,72);
InsertIntegerValue(ABS(ROUND(pTotalAmount*100,1,'<')),12);
InsertTextValue (Blank,48,Blank);
NewLine;
InsertTextValue ('96',2,Blank);
InsertIntegerValue (1, 5);
InsertTextValue(pVATregNo,9,Blank);
InsertTextValue (Blank,118,Blank);
NewLine;
InsertTextValue ('69',2,Blank);
InsertIntegerValue (pResumes[2], 5);
InsertIntegerValue (pResumes[3], 5);
InsertIntegerValue (pResumes[4], 5);
InsertIntegerValue (pResumes[5], 5);
InsertIntegerValue (pResumes[6], 5);
InsertIntegerValue (pResumes[7], 5);
InsertIntegerValue (pResumes[8], 5);
InsertIntegerValue (1, 5);
InsertTextValue (Blank,92,Blank);
//PT355807,en
END;
PROCEDURE LastVATAnnex41Line2@1000000008(pVATAnnexSetup@1000000001 : Record 13386;pTotalAmount@1000000000 : Decimal;pResumes@1000000002 : ARRAY [10] OF Integer);
BEGIN
//PT355807,sn
NewLine;
InsertTextValue (pVATAnnexSetup."Record Type",2,Blank);
InsertIntegerValue(0,48);
InsertIntegerValue(ABS(ROUND(pTotalAmount*100,1,'<')),12);
InsertTextValue (Blank,72,Blank);
NewLine;
InsertTextValue ('89',2,Blank);
InsertIntegerValue (pResumes[2], 5);
InsertIntegerValue (pResumes[3], 5);
InsertIntegerValue (pResumes[4], 5);
InsertIntegerValue (pResumes[5], 5);
InsertIntegerValue (pResumes[6], 5);
InsertIntegerValue (pResumes[7], 5);
InsertTextValue (Blank,102,Blank);
//NAVPTL005.002,en
// End of the added lines.
END;
BEGIN
... -
Modifiez le code dans l’état de déclaration TVA (PT) (13398) comme suit :
Code existant 1...IF recVATAnnexSetup."Record Type" = LastRecordType THEN
LineNo += 1
ELSE BEGIN
//Delete the following lines.
IndiceArray += 1;
ResumeLines[IndiceArray] := LineNo;
LastRecordType := recVATAnnexSetup."Record Type";
LineNo := 1;
// End of the deleted lines.
END;
VATRepBuffer.InsertAnnex4041CustomerLine(recVATAnnexSetup,LineNo,"VAT Registration No.","VAT Entry Customer");
...Code de substitution 1
...IF recVATAnnexSetup."Record Type" = LastRecordType THEN
LineNo += 1
ELSE BEGIN
// Add the following lines.
//PT355807,o IndiceArray += 1;
//PT355807,sn
EVALUATE(recType,recVATAnnexSetup."Record Type");
IF AnnexFilter = 40 THEN
IndiceArray := recType - 60
ELSE
IndiceArray := recType - 80;
//PT355807,en
ResumeLines[IndiceArray] := LineNo;
LastRecordType := recVATAnnexSetup."Record Type";
LineNo := 1;
// End of the added lines.
END;
VATRepBuffer.InsertAnnex4041CustomerLine(recVATAnnexSetup,LineNo,"VAT Registration No.","VAT Entry Customer");
...Code existant 2
...IF recVATAnnexSetup."Record Type" = LastRecordType THEN
LineNo += 1
ELSE BEGIN
// Delete the following lines.
IndiceArray += 1;
ResumeLines[IndiceArray] := LineNo;
LastRecordType := recVATAnnexSetup."Record Type";
LineNo := 1;
// End of the deleted lines.
END;
VATRepBuffer.InsertAnnex4041DocumentLine(recVATAnnexSetup,LineNo,"External Document No.","VAT Entry Document No.");
...Code de substitution 2
...IF recVATAnnexSetup."Record Type" = LastRecordType THEN
LineNo += 1
ELSE BEGIN
// Add the following lines.
//PT355807,o IndiceArray += 1;
//PT355807,sn
EVALUATE(recType,recVATAnnexSetup."Record Type");
IF AnnexFilter = 40 THEN
IndiceArray := recType - 60
ELSE
IndiceArray := recType - 80;
//PT355807,en
ResumeLines[IndiceArray] := LineNo;
LastRecordType := recVATAnnexSetup."Record Type";
LineNo := 1;
// End of the added lines.
END;
VATRepBuffer.InsertAnnex4041DocumentLine(recVATAnnexSetup,LineNo,"External Document No.","VAT Entry Document No.");
...Code existant 3
...OnPostDataItem=BEGIN
CLEAR(recVATAnnexSetup);
// Delete the following lines.
recVATAnnexSetup.SETRANGE("Reason Code", "Reason Code");
IF recVATAnnexSetup.FINDFIRST THEN
IF AnnexFilter = 41 THEN
VATRepBuffer.LastVATAnnex41Line(recVATAnnexSetup,TotalVATAnnexAmount,ResumeLines);
// End of the deleted lines.
END;
TotalFields=Base,Amount;
...Code de substitution 3
...OnPostDataItem=BEGIN
CLEAR(recVATAnnexSetup);
// Add the following lines.
booTotal := FALSE; //PT355807,n
recVATAnnexSetup.SETRANGE("Reason Code", "Reason Code");
//PT355807,o IF recVATAnnexSetup.FINDFIRST THEN
//PT355807,o IF AnnexFilter = 41 THEN
//PT355807,o VATRepBuffer.LastVATAnnex41Line(recVATAnnexSetup,TotalVATAnnexAmount,ResumeLines);
//PT355807,sn
IF recVATAnnexSetup.FINDFIRST THEN BEGIN
IF AnnexFilter = 41 THEN BEGIN
booTotal := TRUE;
VATRepBuffer.LastVATAnnex41Line(recVATAnnexSetup,TotalVATAnnexAmount,ResumeLines);
END;
IF AnnexFilter = 40 THEN BEGIN
booTotal := TRUE;
VATRepBuffer.LastVATAnnex40Line(TotalVATAnnexAmount,FORMAT(FiscalNo),ResumeLines);
END;
END;
//PT355807,en
// End of the added lines.
END;
TotalFields=Base,Amount;
...4 le code existant
...IF recVATAnnexSetup."Record Type" = LastRecordType THEN
LineNo += 1
ELSE BEGIN
// Delete the following lines.
IndiceArray += 1;
ResumeLines[IndiceArray] := LineNo;
LastRecordType := recVATAnnexSetup."Record Type";
LineNo := 1;
// End of the deleted lines.
END;
TotalVATAnnexBase += Base;
...Code de remplacement 4
...IF recVATAnnexSetup."Record Type" = LastRecordType THEN
LineNo += 1
ELSE BEGIN
// Add the following lines.
//PT355807,o IndiceArray += 1;
//PT355807,sn
EVALUATE(recType,recVATAnnexSetup."Record Type");
IF AnnexFilter = 40 THEN
IndiceArray := recType - 60
ELSE
IndiceArray := recType - 80;
//PT355807,en
ResumeLines[IndiceArray] := LineNo;
LastRecordType := recVATAnnexSetup."Record Type";
LineNo := 1;
// End of the added lines.
END;
TotalVATAnnexBase += Base;
...Code existant 5
...RegistersNumber += 1;
// Delete the following line.
VATRepBuffer.InsertAnnex4041ReasonLine(recVATAnnexSetup,"VAT Entry Reason Code");
END;
}
...Code de remplacement 5
...RegistersNumber += 1;
+ //PT355807,o VATRepBuffer.InsertAnnex4041ReasonLine(recVATAnnexSetup,"VAT Entry Reason Code");
+ VATRepBuffer.InsertAnnex4041ReasonLine(recVATAnnexSetup,"VAT Entry Reason Code",LineNo); //PT355807,n
END;
}6 le code existant
...WHERE(Number=CONST(1));
DataItemVarName=TotalInteger;
OnAfterGetRecord=BEGIN
// Delete the following lines.
IF AnnexFilter = 40 THEN
VATRepBuffer.LastVATAnnex40Line(FORMAT(FiscalNo),ResumeLines);
// End of the deleted lines.
END;
}
...Code de remplacement 6
...WHERE(Number=CONST(1));
DataItemVarName=TotalInteger;
OnAfterGetRecord=BEGIN
// Add the following lines.
//PT355807,o IF AnnexFilter = 40 THEN
//PT355807,o VATRepBuffer.LastVATAnnex40Line(FORMAT(FiscalNo),ResumeLines);
//PT355807,sn
IF NOT booTotal THEN BEGIN
recVATAnnexSetup2.RESET;
recVATAnnexSetup2.SETFILTER(Annex, FORMAT(AnnexFilter));
IF recVATAnnexSetup2.FINDLAST THEN BEGIN
IF AnnexFilter = 40 THEN
VATRepBuffer.LastVATAnnex40Line2(recVATAnnexSetup2,TotalVATAnnexAmount,FORMAT(FiscalNo),ResumeLines);
IF AnnexFilter = 41 THEN
VATRepBuffer.LastVATAnnex41Line2(recVATAnnexSetup2,TotalVATAnnexAmount,ResumeLines);
END;
END;
//PT355807,en
// End of the added lines.
END;
}
...Code existant 7
...LastRecordType@1000000009 : Text[2];
TotalVATAnnexBase@1000000005 : Decimal;
TotalVATAnnexAmount@1000000006 : Decimal;
PROCEDURE CalcLineTotal2C@1110001(VATStmtLine2@1110000 : Record 256;Level@1110001 : Integer) : Boolean;
BEGIN
...Code de remplacement 7
...LastRecordType@1000000009 : Text[2];
TotalVATAnnexBase@1000000005 : Decimal;
TotalVATAnnexAmount@1000000006 : Decimal;
// Add the following lines.
booTotal@1000000013 : Boolean;
recVATAnnexSetup2@1000000014 : Record 13386;
recType@1000000015 : Integer;
// End of the added lines.
PROCEDURE CalcLineTotal2C@1110001(VATStmtLine2@1110000 : Record 256;Level@1110001 : Integer) : Boolean;
BEGIN
...
Conditions préalables
Vous devez disposer d’un des produits suivants est installé pour appliquer ce correctif :
-
La version portugaise de Microsoft Dynamics NAV 2009 R2
-
La version portugaise de Microsoft Dynamics NAV 2009 SP1
Informations sur la suppression
Vous ne pouvez pas supprimer ce correctif.
État
Microsoft a confirmé l'existence de ce problème dans les produits Microsoft répertoriés dans la section « S'applique à ».
Remarque Il s’agit d’un article de « Dernière minute » créé directement à partir de l’organisation de support technique de Microsoft. Les informations contenues dans ce document sont fournies en l'état, en réponse à des problèmes nouveaux. En raison de la rapidité de leur mise à disposition, les documents peuvent contenir des erreurs typographiques et peuvent être révisés à tout moment sans préavis. Consultez les Conditions d’utilisationpour d’autres considérations.