Prijavite se pomoću Microsofta
Prijavi se ili izradi račun.
Zdravo,
Odaberite drugi račun.
Imate više računa
Odaberite račun putem kojeg se želite prijaviti.
engleski
Nažalost, ovaj članak nije dostupan na vašem jeziku.

August release main support package deployment tables

Microsoft Windows deployment tables

Windows Server 2008 (all editions)

Reference table

The following table contains the security update information for this software.

Security update file names

For all supported 32-bit editions of Windows Server 2008:
Windows6.0-KB4022750-x86.msu
Windows6.0-KB4034034-x86.msu
Windows6.0-KB4034741-x86.msu
Windows6.0-KB4034744-x86.msu
Windows6.0-KB4034745-x86.msu
Windows6.0-KB4034775-x86.msu
Windows6.0-KB4035055-x86.msu
Windows6.0-KB4035056-x86.msu
Windows6.0-KB4035679-x86.msu

For all supported x64-based editions of Windows Server 2008:
Windows6.0-KB4034034-x64.msu
Windows6.0-KB4022750-x64.msu
Windows6.0-KB4034741-x64.msu
Windows6.0-KB4034744-x64.msu
Windows6.0-KB4034745-x64.msu
Windows6.0-KB4034775-x64.msu
Windows6.0-KB4035055-x64.msu
Windows6.0-KB4035056-x64.msu
Windows6.0-KB4035679-x64.msu

For all supported Itanium-based editions of Windows Server 2008:
Windows6.0-KB4022750-ia64.msu
Windows6.0-KB4034034-ia64.msu
Windows6.0-KB4034741-ia64.msu
Windows6.0-KB4034744-ia64.msu
Windows6.0-KB4034745-ia64.msu

Windows6.0-KB4034775-ia64.msu
Windows6.0-KB4035055-ia64.msu
Windows6.0-KB4035056-ia64.msu
Windows6.0-KB4035679-ia64.msu

Installation switches

See Microsoft Knowledge Base Article 934307

Restart requirement

You must restart the system after you apply this security update.

Removal information

WUSA.exe does not support uninstalling updates. To uninstall an update that is installed by WUSA, click Control Panel, and then click Security. Under "Windows Update," click View installed updates, and then select from the list of updates.

File information

See Microsoft Knowledge Base Article 4022750
See Microsoft Knowledge Base Article 4034034
See Microsoft Knowledge Base Article 4034741
See Microsoft Knowledge Base Article 4034744
See Microsoft Knowledge Base Article 4034745
See Microsoft Knowledge Base Article 4034775
See Microsoft Knowledge Base Article 4035055
See Microsoft Knowledge Base Article 4035056
See Microsoft Knowledge Base Article 4035679

Registry key verification

Note This update does not add a registry key to validate its installation.

 

Internet Explorer deployment tables

Internet Explorer 9, Internet Explorer 10, and Internet Explorer 11 installed on Windows (all editions)

Reference table

The following table contains the security update information for this software.

Security update file names

For Internet Explorer 9 in all supported 32-bit editions of Windows Server 2008:
IE9-Windows6.0-KB4034733-x86.msu

 

For Internet Explorer 9 in all supported 64-bit editions of Windows Server 2008:
Windows8-RT-KB4034733-x64.msu

 

For Internet Explorer 10 in all supported editions of Windows Server 2012:
Windows8-RT-KB4034733-x64.msu

 

For Internet Explorer 11 in Windows 7 for 32-bit Systems Service Pack 1:
IE11-Windows6.1-KB4034733-x86.msu

 

For Internet Explorer 11 in all supported 32-bit editions of Windows 8.1:
Windows8.1-KB4034733-x86.msu

 

For Internet Explorer 11 in all supported editions of Windows Server 2012 R2:
Windows8.1-KB4034733-x64.msu

 

For Internet Explorer 11 in Windows 7 for x64-based Systems Service Pack 1:
IE11-Windows6.1-KB4034733-x64.msu

 

For Internet Explorer 11 in Windows Server 2008 R2 for x64-based Systems Service Pack 1:
IE11-Windows6.1-KB4034733-x64.msu

 

For Internet Explorer 11 in all supported x64-based editions of Windows 8.1:
Windows8.1-KB4034733-x64.msu

Installation switches

See Microsoft Knowledge Base Article 934307

Restart requirement

You must restart the system after you apply this security update.

Removal information

WUSA.exe does not support uninstalling updates. To uninstall an update that is installed by WUSA, click Control Panel, and then click Security. Under "Windows Update," click View installed updates, and then select from the list of updates.

File information

See Microsoft Knowledge Base Article 4034733

Registry key verification

Note This update does not add a registry key to validate its installation.

 

Microsoft Office deployment tables

Microsoft SharePoint Server 2010 (all editions)

Reference table

The following table contains the security update information for this software.

Security update file name

Microsoft SharePoint Server 2010 Service Pack 2
coreserver2010-kb2956077-fullfile-x64-glb.exe

Installation switches

See Microsoft Knowledge Base Article 912203

Restart requirement

After you install this security update on all SharePoint servers, you must run the PSconfig tool to complete the installation process.

You may have to restart the computer after you install this security update.

In some cases, this update does not require a restart. If the required files are being used, this update will require a restart. If this behavior occurs, a message is displayed that advises you to restart the computer.

To help reduce the possibility that a restart will be required, stop all affected services and close all applications that may use the affected files before you install this security update.

For more information, see Why you may be prompted to restart your computer after you install a security update on a Windows-based computer.

Removal information

This security update cannot be removed.

File Information

See Microsoft Knowledge Base Article 2956077

Registry key verification

Not applicable

 

SQL Server deployment tables

SQL Server 2012 Service Pack 3

Reference table

The following table contains the security update information for this software.

Security update file names

For GDR update of SQL Server 2012 Service Pack 3 for 32-bit Systems:
SQLServer2012-KB4019092-x86.exe

 

For GDR update of SQL Server 2012 Service Pack 3 for x64-based Systems:
SQLServer2012-KB4019092-x64.exe

 

For CU update of SQL Server 2012 Service Pack 3 for 32-bit Systems:
SQLServer2012-KB4025925-x86.exe

 

For CU update of SQL Server 2012 Service Pack 3 for x64-based Systems:
SQLServer2012-KB4025925-x64.exe

Installation switches

See Microsoft Knowledge Base Article 934307

Update log file

%programfiles%\Microsoft SQL Server\110\Setup Bootstrap\LOG\<TimeStamp>\MSSQLServer\Summary_<MachineName>_<Timestamp>.txt

Special instructions

The update will also be offered to SQL Server 2012 instances that are clustered.

If your SQL Server 2012 cluster has a passive node, to reduce downtime, Microsoft recommends that you scan and apply the update to the inactive node first, and then scan and apply it to the active node. When all components have been updated on all nodes, the update will no longer be offered.

Restart requirement

A restart of the SQL Server instance is required if files are in use.
If a restart is required, the installer will prompt or return exit code 3010.

Removal information

Use Add or Remove Programs in Control Panel.

File information

For GDR update of SQL Server 2012 Service Pack 3:
See Microsoft Knowledge Base Article 4019092

For CU update of SQL Server 2012 Service Pack 3:
See Microsoft Knowledge Base Article 4019090

 

SQL Server 2014 Service Pack 1

Reference table

The following table contains the security update information for this software.

Security update file names

For GDR update of SQL Server 2014 Service Pack 1 for 32-bit Systems:
SQLServer2014-KB4019091-x86.exe

 

For GDR update of SQL Server 2014 Service Pack 1 for x64-based Systems:
SQLServer2014-KB4019091-x64.exe

 

For CU update of SQL Server 2014 Service Pack 1 for 32-bit Systems:
SQLServer2014-KB4019099-x86.exe

 

For CU update of SQL Server 2014 Service Pack 1 for x64-based Systems:
SQLServer2014-KB4019099-x64.exe

Installation switches

See Microsoft Knowledge Base Article 934307

Update log file

%programfiles%\Microsoft SQL Server\120\Setup Bootstrap\LOG\<TimeStamp>\MSSQLServer\Summary_<MachineName>_<Timestamp>.txt

Special instructions

The update will also be offered to SQL Server 2014 Service Pack 1 instances that are clustered.

If your SQL Server 2014 Service Pack 1 cluster has a passive node, to reduce downtime, Microsoft recommends that you scan and apply the update to the inactive node first, and then scan and apply it to the active node. When all components have been updated on all nodes, the update will no longer be offered.

Restart requirement

A restart of the SQL Server instance is required if files are in use.
If a restart is required, the installer will prompt or return exit code 3010.

Removal information

Use Add or Remove Programs in Control Panel.

File information

For GDR update of SQL Server 2014 Service Pack 1:
See Microsoft Knowledge Base Article 4019091

For CU update of SQL Server 2014 Service Pack 1:
See Microsoft Knowledge Base Article 4032542

 

SQL Server 2014 Service Pack 2

Reference table

The following table contains the security update information for this software.

Security update file names

For GDR update of SQL Server 2014 Service Pack 2 for 32-bit Systems:
SQLServer2014-KB4019093-x86.exe

 

For GDR update of SQL Server 2014 Service Pack 2 for x64-based Systems:
SQLServer2014-KB4019093-x64.exe

 

For CU update of SQL Server 2014 Service Pack 2 for 32-bit Systems:
SQLServer2014-KB4019094-x86.exe

 

For CU update of SQL Server 2014 Service Pack 2 for x64-based Systems:
SQLServer2014-KB4019094-x64.exe

Installation switches

See Microsoft Knowledge Base Article 934307

Update log file

%programfiles%\Microsoft SQL Server\120\Setup Bootstrap\LOG\<TimeStamp>\MSSQLServer\Summary_<MachineName>_<Timestamp>.txt

Special instructions

The update will also be offered to SQL Server 2014 Service Pack 2 instances that are clustered.

If your SQL Server 2014 Service Pack 2 cluster has a passive node, to reduce downtime, Microsoft recommends that you scan and apply the update to the inactive node first, and then scan and apply it to the active node. When all components have been updated on all nodes, the update will no longer be offered.

Restart requirement

A restart of the SQL Server instance is required if files are in use.
If a restart is required, the installer will prompt or return exit code 3010.

Removal information

Use Add or Remove Programs in Control Panel.

File information

For GDR update of SQL Server 2014 Service Pack 2:
See Microsoft Knowledge Base Article 4019093

For CU update of SQL Server 2014 Service Pack 2:
See Microsoft Knowledge Base Article 4036996

 

SQL Server 2016

Reference table

The following table contains the security update information for this software.

Security update file names

For GDR update of SQL Server 2016 for x64-based Systems:
SQLServer2016-KB4019088-x64.exe

 

For CU update of SQL Server 2016 for x64-based Systems:
SQLServer2016-KB4024304-x64.exe

Installation switches

See Microsoft Knowledge Base Article 934307

Update log file

%programfiles%\Microsoft SQL Server\130\Setup Bootstrap\LOG\<TimeStamp>\MSSQLServer\Summary_<MachineName>_<Timestamp>.txt

Special instructions

The update will also be offered to SQL Server 2016 instances that are clustered.

If your SQL Server 2016 cluster has a passive node, to reduce downtime, Microsoft recommends that you scan and apply the update to the inactive node first, and then scan and apply it to the active node. When all components have been updated on all nodes, the update will no longer be offered.

Restart requirement

A restart of the SQL Server instance is required if files are in use.
If a restart is required, the installer will prompt or return exit code 3010.

Removal information

Use Add or Remove Programs in Control Panel.

File information

For GDR update of SQL Server 2016:
See Microsoft Knowledge Base Article 4019088

For CU update of SQL Server 2016:
See Microsoft Knowledge Base Article 4019086

 

SQL Server 2016 Service Pack 1

Reference table

The following table contains the security update information for this software.

Security update file names

For GDR update of SQL Server 2016 Service Pack 1 for x64-based Systems:
SQLServer2016-KB4019089-x64.exe

 

For CU update of SQL Server 2016 for Service Pack 1 x64-based Systems:
SQLServer2016-KB4024305-x64.exe

Installation switches

See Microsoft Knowledge Base Article 934307

Update log file

%programfiles%\Microsoft SQL Server\130\Setup Bootstrap\LOG\<TimeStamp>\MSSQLServer\Summary_<MachineName>_<Timestamp>.txt

Special instructions

The update will also be offered to SQL Server 2016 instances that are clustered.

If your SQL Server 2016 cluster has a passive node, to reduce downtime, Microsoft recommends that you scan and apply the update to the inactive node first, and then scan and apply it to the active node. When all components have been updated on all nodes, the update will no longer be offered.

Restart requirement

A restart of the SQL Server instance is required if files are in use.
If a restart is required, the installer will prompt or return exit code 3010.

Removal information

Use Add or Remove Programs in Control Panel.

File information

For GDR update of SQL Server 2016 Service Pack 1:
See Microsoft Knowledge Base Article 4019089

For CU update of SQL Server 2016 Service Pack 1:
See Microsoft Knowledge Base Article 4019095

Potrebna vam je dodatna pomoć?

Želite dodatne mogućnosti?

Explore subscription benefits, browse training courses, learn how to secure your device, and more.

Communities help you ask and answer questions, give feedback, and hear from experts with rich knowledge.

Jesu li vam ove informacije bile korisne?

Što je utjecalo na vaše iskustvo?
Ako pritisnete Pošalji, vaše će se povratne informacije iskoristiti za poboljšanje Microsoftovih proizvoda i usluga. Vaš će IT administrator moći prikupiti te podatke. Izjava o zaštiti privatnosti.

Hvala vam na povratnim informacijama!

×