PVM neužregistruotas neteisingai taikant kredito pažymos Italijos versija Microsoft Dynamics NAV 2009 pardavimo sąskaita faktūra

Karštųjų pataisų informacija

Palaikomą naujausią pataisą dabar yra Microsoft. Tačiau jos skirtos tik šiame straipsnyje aprašytai problemai spręsti. Taikyti ją tik sistemoms, kuriose kyla ši konkreti problema. Šios karštosios pataisos gali būti papildomai išbandoma. Todėl, jei jums nelabai trukdo Ši problema, rekomenduojame palaukti kito "Microsoft Dynamics NAV 2009" pakeitimų paketo arba kitą versiją Microsoft Dynamics NAV, kuriame bus šios karštosios pataisos.

Pastaba. Konkrečiais atvejais už palaikymo skambučius gali būti atšaukti, jei techninės pagalbos specialistas Microsoft Dynamics ir susijusių produktų taikomi įprasti mokesčiai nustato, kad jūsų problemą galima išspręsti naudojant konkretų naujinimą. Į įprastos kainos už palaikymą taikomos papildomos palaikymo klausimams ir problemoms, kurių negalima išspręsti naudojant minėtą naujinimą.

Diegimo informacija

Microsoft pateikia programavimo pavyzdžius tik, tačiau nesuteikia jokių aiškių arba numanomų garantijų. Tai apima, bet neapsiribojant, numanomas garantijas dėl perkamumo ir tinkamumo konkrečiam tikslui. Šis straipsnis parašytas galvojant, kad esate susipažinę su pateikta programavimo kalba ir įrankiais, kurie yra naudojami procedūroms kurti ir derinti. "Microsoft" palaikymo inžinieriai gali padėti paaiškindami konkrečios procedūros funkcines galimybes. Tačiau jie nekeis šių pavyzdžių, kad numatytų papildomą funkcinę galimybę arba sukurtų konkrečius jūsų reikalavimus atitinkančias procedūras.

Pastaba. Prieš diegdami šias karštąsias pataisas, patikrinkite, kad visi Microsoft Dynamics NAV kliento vartotojai išsiregistravę sistema. Tai apima Microsoft Dynamics NAV programų serverio (NAS) paslaugas. Jums turėtų būti tik kliento vartotojo, kuris yra prisijungęs, kai atliekate šias karštąsias pataisas.

Norint pritaikyti šią karštąją pataisą, turite programų kūrėjo licencijos.

Rekomenduojame, kad vartotojo abonemento Windows registravimosi lange arba duomenų bazės prisijungimų langas priskirti "SUPER" vaidmenį ID. Jei vartotojo abonementas negali būti priskirta "SUPER" ID., turi patikrinti, kad vartotojo abonementas turi šias teises:

• Keisti teisės objektas, kuris bus pakeisti.

• Teisės vykdyti sistemos objekto ID 5210 objekto ir sistemos objekto ID 9015
  
  objekto.

Pastaba. Jūs neturite turėti teisių į duomenų parduotuvių, nebent jūs turite atlikti duomenų atkūrimo.

Pastaba.

Pastaba. Visada bandymas kodas nustato kontroliuojamoje aplinkoje prieš taikydami nustato savo gamybos kompiuteriams.

Norėdami išspręsti šią problemą, atlikite šiuos veiksmus:

1. Pakeisti raktai lentelę PVM įrašas (254) kodą taip:
   Esamas kodas

   ...KeyGroups=SalesTax }
         {    ;Type,Country/Region Code,VAT Registration No.,VAT Bus. Posting Group,VAT Prod. Posting Group,Posting Date;
                                                        SumIndexFields=Base,Additional-Currency Base;
                                                        KeyGroups=VIES_EC }
   
   // Delete the following line.
        {    ;Document No.,Posting Date                }
   // End of the deleted line.
   
         {    ;Transaction No.                          }
         {    ;Tax Jurisdiction Code,Tax Group Used,Tax Type,Use Tax,Posting Date;
                                                        KeyGroups=SalesTax }
         {    ;Type,Closed,VAT Bus. Posting Group,VAT Prod. Posting Group,Tax Jurisdiction Code,Use Tax,Tax Liable,VAT Period,Operation Occurred Date,Activity Code;
   ...
   

   Pastaba.

   ...KeyGroups=SalesTax }
         {    ;Type,Country/Region Code,VAT Registration No.,VAT Bus. Posting Group,VAT Prod. Posting Group,Posting Date;
                                                        SumIndexFields=Base,Additional-Currency Base;
                                                        KeyGroups=VIES_EC }
   
   // Add the following line.
        {    ;Document No.,Posting Date               ;SumIndexFields=Remaining Unrealized Base,Remaining Unrealized Amount }
   // End of the added line.
   
         {    ;Transaction No.                          }
         {    ;Tax Jurisdiction Code,Tax Group Used,Tax Type,Use Tax,Posting Date;
                                                        KeyGroups=SalesTax }
         {    ;Type,Closed,VAT Bus. Posting Group,VAT Prod. Posting Group,Tax Jurisdiction Code,Use Tax,Tax Liable,VAT Period,Operation Occurred Date,Activity Code;
   ...
   

2. Pakeisti GetUnRealizedVATPart funkcija PVM įrašų lentelėje (254) kodą taip:
   Esamas kodas 1

   ...END;
           EXIT(GLSetup."Additional Reporting Currency");
         END;
   
   // Delete the following line.
        PROCEDURE GetUnRealizedVATPart@2(SettledAmount@1003 : Decimal;Paid@1005 : Decimal;Full@1001 : Decimal;TotalUnrealVATAmountFirst@1006 : Decimal;TotalUnrealVATAmountLast@1007 : Decimal;Type2@1130000 : 'Sale,Purchase';DocType@1130001 : ' ,Payment,Invoice,Credit Memo,Finance Charge Memo,Reminder,Refund,,,,Dishonored';LedgEntryOpen@1130002 : Boolean;LedgEntryAmount@1130003 : Decimal;LedgEntryRemAmt@1130004 : Decimal;TotalPayments@1130005 : Decimal) : Decimal;
   // End of the deleted line.
   
         VAR
           UnrealizedVatType@1000 : ' ,Percentage,First,Last,First (Fully Paid),Last (Fully Paid)';
         BEGIN
           IF (Type <> 0) AND
   ...
   

   Atsarginis kodas 1

   ...END;
           EXIT(GLSetup."Additional Reporting Currency");
         END;
   
   // Add the following line.
        PROCEDURE GetUnRealizedVATPart@2(SettledAmount@1003 : Decimal;Paid@1005 : Decimal;Full@1001 : Decimal;TotalUnrealVATAmountFirst@1006 : Decimal;TotalUnrealVATAmountLast@1007 : Decimal;Type2@1130000 : 'Sale,Purchase';DocType@1130001 : ' ,Payment,Invoice,Credit Memo,Finance Charge Memo,Reminder,Refund,,,,Dishonored';LedgEntryOpen@1130002 : Boolean;LedgEntryAmount@1130003 : Decimal;LedgEntryRemAmt@1130004 : Decimal;TotalPayments@1130005 : Decimal;VATPart@1130006 : Decimal;VAR TransactionInclPrepmt@1130007 : Boolean) : Decimal;
   // End of the added line.
   
         VAR
           UnrealizedVatType@1000 : ' ,Percentage,First,Last,First (Fully Paid),Last (Fully Paid)';
         BEGIN
           IF (Type <> 0) AND
   ...
   

   Esamas kodas 2

   ...(("Remaining Unrealized Amount" = 0) AND
                 ("Remaining Unrealized Base" = 0))
             THEN
               EXIT(0);
   
   // Delete the following lines.
           //IF ABS(Paid) = ABS(Full) THEN
           //   EXIT(1);
   
            CASE UnrealizedVatType OF
              UnrealizedVatType::Percentage:
                BEGIN
                  IF Type2 = Type2::Purchase THEN BEGIN
                    IF (DocType = DocType::"Credit Memo") THEN BEGIN
                      IF (TotalPayments - ("Remaining Unrealized Amount" + "Remaining Unrealized Base")) <= 0 THEN
                        EXIT(1)
                    END ELSE BEGIN
                      IF (TotalPayments - ("Remaining Unrealized Amount" + "Remaining Unrealized Base")) < 0 THEN
                        EXIT(CalcVatPart(GetCurrencyCode(), 1.0, TotalPayments,
                          ("Remaining Unrealized Amount" + "Remaining Unrealized Base")))
                      ELSE
                        EXIT(1)
                    END;
                  END
                  ELSE BEGIN
                    IF (DocType = DocType::"Credit Memo") THEN BEGIN
                      IF (-TotalPayments + ("Remaining Unrealized Amount" + "Remaining Unrealized Base")) <= 0 THEN
                        EXIT(1)
                    END ELSE BEGIN
                      IF (-TotalPayments + ("Remaining Unrealized Amount" + "Remaining Unrealized Base")) < 0 THEN
                        EXIT(CalcVatPart(GetCurrencyCode(), 1.0, TotalPayments,
                          ("Remaining Unrealized Amount" + "Remaining Unrealized Base")))
                      ELSE
                        EXIT(1)
                    END;
                  END;
   // End of the deleted lines.
   
                 END;
               UnrealizedVatType::First,UnrealizedVatType::"First (Fully Paid)":
                   BEGIN
                     IF NOT LedgEntryOpen OR ("VAT Calculation Type" = "VAT Calculation Type"::"Reverse Charge VAT") THEN
   ...
   

   Atsarginis kodas 2

   ...(("Remaining Unrealized Amount" = 0) AND
                 ("Remaining Unrealized Base" = 0))
             THEN
               EXIT(0);
   
   // Add the following lines.
            IF (ABS(GetRemainingUnrealizedAmount("Document No.","Posting Date")) = ABS(Paid)) AND
               NOT IsPrepaymentIncluded(Type2,DocType,"Document No.")
            THEN BEGIN
              VATPart := 1;
              EXIT(VATPart);
            END;
   
            CASE UnrealizedVatType OF
              UnrealizedVatType::Percentage:
                IF Type2 = Type2::Purchase THEN BEGIN
                  TransactionInclPrepmt := FALSE;
                  IF DocType = DocType::"Credit Memo" THEN BEGIN
                    IF PurchCrMemoInclPrepmt("Document No.") THEN BEGIN
                      TransactionInclPrepmt := TRUE;
                      IF VATPart = 0 THEN BEGIN
                        IF (ABS(TotalPayments) >= ABS(GetTransactionRemainingAmount("Transaction No."))) OR
                           (ABS(Paid) = ABS(Full))
                        THEN
                          VATPart := 1
                        ELSE
                          VATPart :=
                            CalcVatPart(
                              GetCurrencyCode,1.0,TotalPayments,
                              GetTransactionRemainingAmount("Transaction No."));
                      END;
                      EXIT(VATPart);
                    END ELSE
                      IF (TotalPayments - ("Remaining Unrealized Amount" + "Remaining Unrealized Base")) <= 0 THEN
                        EXIT(1)
                  END ELSE BEGIN
                    IF PurchInvInclPrepmt("Document No.") THEN BEGIN
                      TransactionInclPrepmt := TRUE;
                      IF VATPart = 0 THEN BEGIN
                        IF (ABS(TotalPayments) >= ABS(GetTransactionRemainingAmount("Transaction No."))) OR
                          (ABS(Paid) = ABS(Full))
                        THEN
                          VATPart := 1
                        ELSE
                          VATPart :=
                            CalcVatPart(
                              GetCurrencyCode,1.0,TotalPayments,
                              GetTransactionRemainingAmount("Transaction No."));
                      END;
                      EXIT(VATPart);
                    END ELSE
                      IF (TotalPayments - ("Remaining Unrealized Amount" + "Remaining Unrealized Base")) < 0 THEN
                        EXIT(
                          CalcVatPart(
                            GetCurrencyCode,1.0,TotalPayments,
                           ("Remaining Unrealized Amount" + "Remaining Unrealized Base")));
                    EXIT(1);
                  END;
                END ELSE BEGIN
                  TransactionInclPrepmt := FALSE;
                  IF DocType = DocType::"Credit Memo" THEN BEGIN
                    IF SalesInvInclPrepmt("Document No.") THEN BEGIN
                      TransactionInclPrepmt := TRUE;
                      IF VATPart = 0 THEN BEGIN
                        IF (ABS(TotalPayments) >= ABS(GetTransactionRemainingAmount("Transaction No."))) OR
                           (ABS(Paid) = ABS(Full))
                        THEN
                          VATPart := 1
                        ELSE
                          VATPart :=
                            CalcVatPart(
                              GetCurrencyCode,1.0,TotalPayments,
                              GetTransactionRemainingAmount("Transaction No."));
                      END;
                      EXIT(VATPart);
                    END;
                    IF (-TotalPayments + ("Remaining Unrealized Amount" + "Remaining Unrealized Base")) <= 0 THEN
                      EXIT(1);
                    EXIT(TotalPayments / ("Remaining Unrealized Amount" + "Remaining Unrealized Base"));
                  END;
                  IF SalesInvInclPrepmt("Document No.") THEN BEGIN
                    TransactionInclPrepmt := TRUE;
                    IF VATPart = 0 THEN BEGIN
                     IF (ABS(TotalPayments) >= ABS(GetTransactionRemainingAmount("Transaction No."))) OR
                         (ABS(Paid) = ABS(Full))
                      THEN
                        VATPart := 1
                      ELSE
                        VATPart :=
                          CalcVatPart(
                            GetCurrencyCode,1.0,TotalPayments,
                            GetTransactionRemainingAmount("Transaction No."));
                    END;
                    EXIT(VATPart);
                  END ELSE
                    IF (-TotalPayments + ("Remaining Unrealized Amount" + "Remaining Unrealized Base")) < 0 THEN
                      EXIT(
                        CalcVatPart(
                          GetCurrencyCode,1.0,TotalPayments,
                          ("Remaining Unrealized Amount" + "Remaining Unrealized Base")));
                  EXIT(1);
   // End of the added lines.
   
                 END;
               UnrealizedVatType::First,UnrealizedVatType::"First (Fully Paid)":
                   BEGIN
                     IF NOT LedgEntryOpen OR ("VAT Calculation Type" = "VAT Calculation Type"::"Reverse Charge VAT") THEN
   ...
   

3. Pakeisti SalesInvInclPrepmt funkcija PVM įrašų lentelėje (254) kodą taip:
   Esamas kodas

   ...EXIT(RemainingAmount - SettledAmount);
           EXIT(RemainingAmount - (SettledAmount / CurrencyFactor));
         END;
   
         BEGIN
         END.
       }
     }
   ...
   

   Pastaba.

   ...EXIT(RemainingAmount - SettledAmount);
           EXIT(RemainingAmount - (SettledAmount / CurrencyFactor));
         END;
   
   // Add the following lines.
     LOCAL PROCEDURE SalesInvInclPrepmt@1130019(DocNo@1130000 : Code[20]) : Boolean;
     VAR
       SalesInvLine@1130001 : Record 113;
     BEGIN
       SalesInvLine.SETRANGE("Document No.",DocNo);
       SalesInvLine.SETRANGE("Prepayment Line",TRUE);
       EXIT(NOT SalesInvLine.ISEMPTY);
     END;
   
     LOCAL PROCEDURE SalesCrMemoInclPrepmt@1130101(DocNo@1130000 : Code[20]) : Boolean;
     VAR
       SalesCrMemoLine@1130001 : Record 115;
     BEGIN
       SalesCrMemoLine.SETRANGE("Document No.",DocNo);
       SalesCrMemoLine.SETRANGE("Prepayment Line",TRUE);
       EXIT(NOT SalesCrMemoLine.ISEMPTY);
     END;
   
     LOCAL PROCEDURE PurchInvInclPrepmt@1130021(DocNo@1130000 : Code[20]) : Boolean;
     VAR
       PurchInvLine@1130001 : Record 123;
     BEGIN
       PurchInvLine.SETRANGE("Document No.",DocNo);
       PurchInvLine.SETRANGE("Prepayment Line",TRUE);
       EXIT(NOT PurchInvLine.ISEMPTY);
     END;
   
     LOCAL PROCEDURE PurchCrMemoInclPrepmt@1130020(DocNo@1130000 : Code[20]) : Boolean;
     VAR
       PurchCrMemoLine@1130001 : Record 125;
     BEGIN
       PurchCrMemoLine.SETRANGE("Document No.",DocNo);
       PurchCrMemoLine.SETRANGE("Prepayment Line",TRUE);
       EXIT(NOT PurchCrMemoLine.ISEMPTY);
     END;
   
     LOCAL PROCEDURE GetTransactionRemainingAmount@1130016(TransactionNo@1130000 : Integer) TransactionAmount : Decimal;
     VAR
       VATEntry@1130001 : Record 254;
     BEGIN
       WITH VATEntry DO BEGIN
         SETRANGE("Transaction No.",TransactionNo);
         IF FINDSET THEN
           REPEAT
             TransactionAmount += "Remaining Unrealized Base" + "Remaining Unrealized Amount";
           UNTIL NEXT = 0;
       END;
     END;
   
     LOCAL PROCEDURE GetRemainingUnrealizedAmount@1130017(DocumentNo@1130000 : Code[20];PostingDate@1130001 : Date) : Decimal;
     VAR
       VATEntry@1130002 : Record 254;
     BEGIN
       VATEntry.SETCURRENTKEY("Document No.","Posting Date");
       VATEntry.SETRANGE("Document No.",DocumentNo);
       VATEntry.SETRANGE("Posting Date",PostingDate);
       VATEntry.CALCSUMS("Remaining Unrealized Base","Remaining Unrealized Amount");
       EXIT(VATEntry."Remaining Unrealized Base" + VATEntry."Remaining Unrealized Amount");
     END;
   
     LOCAL PROCEDURE IsPrepaymentIncluded@1130023(VATType@1130002 : 'Sale,Purchase';DocumentType@1130000 : ' ,Payment,Invoice,Credit Memo,Finance Charge Memo,Reminder,Refund,,,,Dishonored';DocumentNo@1130001 : Code[20]) : Boolean;
     BEGIN
       CASE VATType OF
         VATType::Purchase:
           IF DocumentType = DocumentType::"Credit Memo" THEN
             EXIT(PurchCrMemoInclPrepmt(DocumentNo))
           ELSE
             EXIT(PurchInvInclPrepmt(DocumentNo));
         VATType::Sale:
           IF DocumentType = DocumentType::"Credit Memo" THEN
             EXIT(SalesInvInclPrepmt(DocumentNo))
           ELSE
             EXIT(SalesCrMemoInclPrepmt(DocumentNo));
       END;
     END;
   // End of the added lines.
   
         BEGIN
         END.
       }
     }
   ...
   

4. Pakeisti CustUnrealizedVAT funkcija, kad bendr.-pašto linijos Kodinys (12) taip:
   Esamas kodas 1

   ...SalesVATUnrealAccount@1010 : Code[20];
           LastConnectionNo@1011 : Integer;
           TotalPayments@1130000 : Decimal;
           Type2@1130001 : 'Sale,Purchase';
         BEGIN
           PaidAmount := CustLedgEntry2."Amount (LCY)" - CustLedgEntry2."Remaining Amt. (LCY)";
           VATEntry2.RESET;
           VATEntry2.SETCURRENTKEY("Transaction No.");
   ...
   

   Atsarginis kodas 1

   ...SalesVATUnrealAccount@1010 : Code[20];
           LastConnectionNo@1011 : Integer;
           TotalPayments@1130000 : Decimal;
           Type2@1130001 : 'Sale,Purchase';
   
   // Add the following line.
          TransactionInclPrepmt@1130002 : Boolean;
   // End of the added line.
   
         BEGIN
           PaidAmount := CustLedgEntry2."Amount (LCY)" - CustLedgEntry2."Remaining Amt. (LCY)";
           VATEntry2.RESET;
           VATEntry2.SETCURRENTKEY("Transaction No.");
   ...
   

   Esamas kodas 2

   ...InsertSummarizedVAT;
                 LastConnectionNo := VATEntry2."Sales Tax Connection No.";
               END;
   
   // Delete the following lines.
              VATPart := VATEntry2.GetUnRealizedVATPart(
                ROUND(SettledAmount / CustLedgEntry2.GetOriginalCurrencyFactor),
                PaidAmount,
                CustLedgEntry2."Original Amt. (LCY)",
                TotalUnrealVATAmountFirst,
                TotalUnrealVATAmountLast,
                Type2::Sale,
                CustLedgEntry2."Document Type",
                CustLedgEntry2.Open,
                CustLedgEntry2.Amount,
                CustLedgEntry2."Remaining Amount",
                TotalPayments);
   // End of the deleted lines.
   
               IF VATPart > 0 THEN BEGIN
                 CASE VATEntry2."VAT Calculation Type" OF
                   VATEntry2."VAT Calculation Type"::"Normal VAT",
   ...
   

   Atsarginis kodas 2

   ...InsertSummarizedVAT;
                 LastConnectionNo := VATEntry2."Sales Tax Connection No.";
               END;
   
   // Add the following lines.
              VATPart :=
                VATEntry2.GetUnRealizedVATPart(
                  ROUND(SettledAmount / CustLedgEntry2.GetOriginalCurrencyFactor),
                  PaidAmount,
                  CustLedgEntry2."Original Amt. (LCY)",
                  TotalUnrealVATAmountFirst,
                  TotalUnrealVATAmountLast,
                  Type2::Sale,
                  CustLedgEntry2."Document Type",
                  CustLedgEntry2.Open,
                  CustLedgEntry2.Amount,
                  CustLedgEntry2."Remaining Amount",
                  TotalPayments,
                  VATPart,
                  TransactionInclPrepmt);
   // End of the added lines.
   
               IF VATPart > 0 THEN BEGIN
                 CASE VATEntry2."VAT Calculation Type" OF
                   VATEntry2."VAT Calculation Type"::"Normal VAT",
   ...
   

   Esamas kodas 3

   ...VATEntry2."Add.-Curr. Rem. Unreal. Base" * VATPart,
                       AddCurrency."Amount Rounding Precision");
                 END;
   
   // Delete the following line.
                TotalPayments := TotalPayments - (VATEntry2."Remaining Unrealized Amount" + VATEntry2."Remaining Unrealized Base");
   // End of the deleted line.
   
                 IF VATAmount <> 0 THEN BEGIN
                   InitGLEntry(SalesVATUnrealAccount,-VATAmount,0,FALSE,TRUE);
                   GLEntry."Additional-Currency Amount" := -VATAmountAddCurr;
   ...
   

   Pakeitimo kodas 3

   ...VATEntry2."Add.-Curr. Rem. Unreal. Base" * VATPart,
                       AddCurrency."Amount Rounding Precision");
                 END;
   
   // Add the following lines.
                IF TransactionInclPrepmt THEN
                  TotalPayments := TotalPayments - ROUND(TotalPayments * VATPart)
                ELSE
                  TotalPayments :=
                    TotalPayments - (VATEntry2."Remaining Unrealized Amount" + VATEntry2."Remaining Unrealized Base");
   // End of the added lines.
   
                 IF VATAmount <> 0 THEN BEGIN
                   InitGLEntry(SalesVATUnrealAccount,-VATAmount,0,FALSE,TRUE);
                   GLEntry."Additional-Currency Amount" := -VATAmountAddCurr;
   ...
   

5. Pakeisti VendUnrealizedVAT funkcija, kad bendr.-pašto linijos Kodinys (12) taip:
   Esamas kodas 1

   ...PurchReverseUnrealAccount@1012 : Code[20];
           LastConnectionNo@1013 : Integer;
           Type2@1130000 : 'Sale,Purchase';
           TotalPayments@1130001 : Decimal;
         BEGIN
           VATEntry2.RESET;
           VATEntry2.SETCURRENTKEY("Transaction No.");
           VATEntry2.SETRANGE("Transaction No.",VendLedgEntry2."Transaction No.");
   ...
   

   Atsarginis kodas 1

   ...PurchReverseUnrealAccount@1012 : Code[20];
           LastConnectionNo@1013 : Integer;
           Type2@1130000 : 'Sale,Purchase';
           TotalPayments@1130001 : Decimal;
   
   // Add the following line.
          TransactionInclPrepmt@1130002 : Boolean;
   // End of the added line.
   
         BEGIN
           VATEntry2.RESET;
           VATEntry2.SETCURRENTKEY("Transaction No.");
           VATEntry2.SETRANGE("Transaction No.",VendLedgEntry2."Transaction No.");
   ...
   

   Esamas kodas 2

   ...IF LastConnectionNo <> VATEntry2."Sales Tax Connection No." THEN BEGIN
                 InsertSummarizedVAT;
                 LastConnectionNo := VATEntry2."Sales Tax Connection No.";
               END;
   
   // Delete the following lines.
              IF (TotalPayments <= 0) AND (VendLedgEntry2."Document Type" = VendLedgEntry2."Document Type"::Invoice) THEN
                EXIT;
              VATPart := VATEntry2.GetUnRealizedVATPart(
                ROUND(SettledAmount / VendLedgEntry2.GetOriginalCurrencyFactor),
                PaidAmount,
                VendLedgEntry2."Original Amt. (LCY)",
                TotalUnrealVATAmountFirst,
                TotalUnrealVATAmountLast,
                Type2::Purchase,
                VendLedgEntry2."Document Type",
                VendLedgEntry2.Open,
                VendLedgEntry2.Amount,
                VendLedgEntry2."Remaining Amount",
                TotalPayments);
   // End of the deleted lines.
   
               IF VATPart >= 0 THEN BEGIN
                 IF VATPart <> 0 THEN BEGIN
                   CASE VATEntry2."VAT Calculation Type" OF
   ...
   

   Atsarginis kodas 2

   ...IF LastConnectionNo <> VATEntry2."Sales Tax Connection No." THEN BEGIN
                 InsertSummarizedVAT;
                 LastConnectionNo := VATEntry2."Sales Tax Connection No.";
               END;
   
   // Add the following lines.
              IF ((TotalPayments <= 0) AND (NOT TransactionInclPrepmt)) AND
                 (VendLedgEntry2."Document Type" = VendLedgEntry2."Document Type"::Invoice)
              THEN
                EXIT;
   
              VATPart :=
                VATEntry2.GetUnRealizedVATPart(
                  ROUND(SettledAmount / VendLedgEntry2.GetOriginalCurrencyFactor),
                  PaidAmount,
                  VendLedgEntry2."Original Amt. (LCY)",
                  TotalUnrealVATAmountFirst,
                  TotalUnrealVATAmountLast,
                  Type2::Purchase,
                  VendLedgEntry2."Document Type",
                  VendLedgEntry2.Open,
                  VendLedgEntry2.Amount,
                  VendLedgEntry2."Remaining Amount",
                  TotalPayments,
                  VATPart,
                  TransactionInclPrepmt);
   // End of the added lines.
   
               IF VATPart >= 0 THEN BEGIN
                 IF VATPart <> 0 THEN BEGIN
                   CASE VATEntry2."VAT Calculation Type" OF
   ...
   

   Esamas kodas 3

   ...PurchVATUnrealAccount := TaxJurisdiction."Unreal. Tax Acc. (Purchases)";
                       END;
                   END;
   
   // Delete the following lines.
                  VATAmount := ROUND((VATEntry2."Remaining Unrealized Amount" * VATPart),GLSetup."Amount Rounding Precision");
                  VATBase := ROUND((VATEntry2."Remaining Unrealized Base"* VATPart),GLSetup."Amount Rounding Precision");
                  TotalPayments := TotalPayments - (VATEntry2."Remaining Unrealized Amount" + VATEntry2."Remaining Unrealized Base");
   // End of the deleted lines.
   
                   IF VATAmount <> 0 THEN BEGIN
                     InitGLEntry(PurchVATUnrealAccount,-VATAmount,0,FALSE,TRUE);
                     GLEntry."Additional-Currency Amount" := -VATAmountAddCurr;
   ...
   

   Pakeitimo kodas 3

   ...PurchVATUnrealAccount := TaxJurisdiction."Unreal. Tax Acc. (Purchases)";
                       END;
                   END;
   
   // Add the following lines.
                  VATAmount := ROUND(VATEntry2."Remaining Unrealized Amount" * VATPart,GLSetup."Amount Rounding Precision");
                  VATBase := ROUND(VATEntry2."Remaining Unrealized Base" * VATPart,GLSetup."Amount Rounding Precision");
                IF TransactionInclPrepmt THEN
                  TotalPayments := TotalPayments - ROUND(TotalPayments * VATPart)
                ELSE
                  TotalPayments :=
                    TotalPayments - (VATEntry2."Remaining Unrealized Amount" + VATEntry2."Remaining Unrealized Base");
   // End of the added lines.
   
                   IF VATAmount <> 0 THEN BEGIN
                     InitGLEntry(PurchVATUnrealAccount,-VATAmount,0,FALSE,TRUE);
                     GLEntry."Additional-Currency Amount" := -VATAmountAddCurr;
   ...
   

Būtinosios sąlygos

Turi būti viena iš toliau nurodytų produktų, norint taikyti šias karštąsias pataisas:

• Microsoft Dynamics NAV 2009 R2 Italijos lokalizavimas

• Microsoft Dynamics NAV 2009 SP1 Italijos lokalizavimas

Pašalinimo informacija

Jūs negalite pašalinti šias karštąsias pataisas.