Este artigo aplica-se à Microsoft para os seguintes países e idiomas.
-
Inglês (Canadá) (en-ca)
-
Inglês (Estados Unidos) (en-us)
-
Espanhol (México) (es-mx)
-
Francês (Canadá) (fr-AC)
Sintomas
Suponha que defina CAD como o valor da divisa adicional para mapas na configuração contabilidade geral caixa de diálogo a versão norte-americana do Microsoft Dynamics NAV 2009. Quando regista uma factura de compras que contém o imposto, recebe a seguinte mensagem de erro:
Não é possível concluir a transacção porque esta causará inconsistências na tabela Mov. Verifique onde e como a função CONSISTENT é utilizada na transacção para encontrar a razão do erro.
Este problema ocorre nos seguintes produtos:
-
A versão norte-americana do Microsoft Dynamics NAV 2009 R2
-
A versão norte-americana do Microsoft Dynamics NAV 2009 Service Pack 1
Resolução
Informações sobre correção
Agora tem uma correcção suportada disponível na Microsoft. Contudo, destina-se apenas a corrigir o problema descrito neste artigo. Aplique-a apenas em sistemas que tenham este problema específico. Esta correcção poderá ser submetida a testes adicionais. Por conseguinte, se não estiver a ser gravemente afectado por este problema, recomendamos que aguarde o próximo service pack do Microsoft Dynamics NAV 2009 ou a próxima versão do Microsoft Dynamics NAV que contenha esta correcção.
Nota Em casos especiais, os custos normalmente inerentes para suporte chamadas poderão ser anuladas se um técnico de suporte técnico do Microsoft Dynamics e produtos relacionados determina que uma actualização específica resolverá o problema. Os custos de normais do suporte serão aplicados a questões de suporte adicionais e problemas que não se enquadrem na atualização específica em questão.
Informações de instalação
A Microsoft fornece exemplos de programação apenas a título ilustrativo, sem garantia expressa ou implícita. Isto inclui, mas não está limitado a, garantias implícitas de comercialização ou adequação a um fim específico. Este artigo pressupõe que está familiarizado com a linguagem de programação que está a ser demonstrada e com as ferramentas que são utilizadas para criar e depurar procedimentos. Técnicos de suporte da Microsoft podem ajudar a explicar a funcionalidade de um determinado procedimento, mas não modificarão estes exemplos para proporcionarem funcionalidades adicionais nem criarão procedimentos adaptados às necessidades específicas do utilizador.
Nota Antes de instalar esta correcção, certifique-se de que todos os utilizadores de cliente do Microsoft Navision são registados no sistema. Isto inclui os utilizadores de clientes do Microsoft Navision Application Server (NAS). Deve ser o único usuário do cliente que tem sessão iniciada quando implementar esta correcção.
Para implementar esta correcção, tem de ter uma licença de desenvolvedor.
Recomendamos que a conta de utilizador na janela Logins do Windows ou na janela Logins de base de dados seja atribuída a ID de função "SUPER". Se a conta de utilizador não é possível atribuir o ID de função "SUPER", tem de verificar que a conta de utilizador tem as seguintes permissões:
-
A permissão Modificar para o objecto que estará a alterar.
-
A permissão executar para o objecto 5210 de ID de objecto de sistema e para o objecto 9015 de ID de objecto de sistema .
Nota Não tem de ter direitos para os arquivos de dados, excepto se tiver de efectuar a reparação de dados.
Alterações de código
Nota Sempre o código de ensaio corrige num ambiente controlado antes de aplicar as correcções para os computadores de produção.
Para resolver este problema, siga estes passos:
-
Altere o código nos campos na tabela Linha de montante do imposto sobre vendas (10011) do seguinte modo:
Código existente...ESM=Es Informe jurisdicci¢n;
FRC=Est une juridiction fiscale;
ENC=Is Report-to Jurisdiction];
Editable=No }
}
KEYS
{
{ ;Tax Area Code for Key,Tax Jurisdiction Code,Tax %,Tax Group Code,Expense/Capitalize,Tax Type,Use Tax;
...Código de substituição
...
ESM=Es Informe jurisdicci¢n;
FRC=Est une juridiction fiscale;
ENC=Is Report-to Jurisdiction];
Editable=No }
// Add the following line.
{ 10044; ;Tax Base Amount FCY ;Decimal }
// End of the added line.
}
KEYS
{
{ ;Tax Area Code for Key,Tax Jurisdiction Code,Tax %,Tax Group Code,Expense/Capitalize,Tax Type,Use Tax;
... -
Altere o código na função PostSalesTaxToGL na Codeunit vendas-Post (80) do seguinte modo:
Código existente...END;
GenJnlLine."Tax Jurisdiction Code" := TempSalesTaxAmtLine."Tax Jurisdiction Code";
IF TempSalesTaxAmtLine."Tax Amount" <> 0 THEN BEGIN
RemSalesTaxSrcAmt := RemSalesTaxSrcAmt +
// Delete the following lines.
CurrExchRate.ExchangeAmtLCYToFCY(
UseDate,SalesHeader."Currency Code",TempSalesTaxAmtLine."Tax Amount",SalesHeader."Currency Factor");
// End of the deleted lines.
GenJnlLine."Source Curr. VAT Amount" :=
SalesTaxCalculate.ArithmeticRound(RemSalesTaxSrcAmt,Currency."Amount Rounding Precision");
RemSalesTaxSrcAmt := RemSalesTaxSrcAmt - GenJnlLine."Source Curr. VAT Amount";
RemSalesTaxAmt := RemSalesTaxAmt + TempSalesTaxAmtLine."Tax Amount";
...Código de substituição
...END;
GenJnlLine."Tax Jurisdiction Code" := TempSalesTaxAmtLine."Tax Jurisdiction Code";
IF TempSalesTaxAmtLine."Tax Amount" <> 0 THEN BEGIN
RemSalesTaxSrcAmt := RemSalesTaxSrcAmt +
// Add the following lines.
TempSalesTaxAmtLine."Tax Base Amount FCY" * TempSalesTaxAmtLine."Tax %" / 100;
// End of the added lines.
GenJnlLine."Source Curr. VAT Amount" :=
SalesTaxCalculate.ArithmeticRound(RemSalesTaxSrcAmt,Currency."Amount Rounding Precision");
RemSalesTaxSrcAmt := RemSalesTaxSrcAmt - GenJnlLine."Source Curr. VAT Amount";
RemSalesTaxAmt := RemSalesTaxAmt + TempSalesTaxAmtLine."Tax Amount";
... -
Alterar o código de função PostSalesTaxToGL na Compr.-Post Codeunit (90) do seguinte modo:
Código existente...END;
GenJnlLine."Tax Jurisdiction Code" := TempSalesTaxAmtLine."Tax Jurisdiction Code";
IF TempSalesTaxAmtLine."Tax Amount" <> 0 THEN BEGIN
RemSalesTaxSrcAmt := RemSalesTaxSrcAmt +
// Delete the following lines.
CurrExchRate.ExchangeAmtLCYToFCY(
Usedate,PurchHeader."Currency Code",TempSalesTaxAmtLine."Tax Amount",PurchHeader."Currency Factor");
// End of the deleted lines.
GenJnlLine."Source Curr. VAT Amount" :=
SalesTaxCalculate.ArithmeticRound(RemSalesTaxSrcAmt,Currency."Amount Rounding Precision");
RemSalesTaxSrcAmt := RemSalesTaxSrcAmt - GenJnlLine."Source Curr. VAT Amount";
RemSalesTaxAmt := RemSalesTaxAmt + TempSalesTaxAmtLine."Tax Amount";
...Código de substituição
...END;
GenJnlLine."Tax Jurisdiction Code" := TempSalesTaxAmtLine."Tax Jurisdiction Code";
IF TempSalesTaxAmtLine."Tax Amount" <> 0 THEN BEGIN
RemSalesTaxSrcAmt := RemSalesTaxSrcAmt +
// Add the following line.
TempSalesTaxAmtLine."Tax Base Amount FCY" * TempSalesTaxAmtLine."Tax %" / 100;
// End of the added line.
GenJnlLine."Source Curr. VAT Amount" :=
SalesTaxCalculate.ArithmeticRound(RemSalesTaxSrcAmt,Currency."Amount Rounding Precision");
RemSalesTaxSrcAmt := RemSalesTaxSrcAmt - GenJnlLine."Source Curr. VAT Amount";
RemSalesTaxAmt := RemSalesTaxAmt + TempSalesTaxAmtLine."Tax Amount";
... -
Alterar o código de função PostProvincialSalesTaxToGL na Compr.-Post Codeunit (90) do seguinte modo:
Código existente...TaxJurisdiction.TESTFIELD("Tax Account (Purchases)");
GenJnlLine."Account No." := TaxJurisdiction."Tax Account (Purchases)";
END;
GenJnlLine.Amount := GenJnlLine."VAT Amount";
// Delete the following lines.
GenJnlLine."Source Curr. VAT Base Amount" := 0;
GenJnlLine."VAT Base Amount (LCY)" := 0;
GenJnlLine."VAT Base Amount" := 0;
GenJnlLine."Source Curr. VAT Amount" := 0;
// End of the deleted lines.
GenJnlLine."VAT Amount (LCY)" := 0;
GenJnlLine."VAT Amount" := 0;
GenJnlLine.Quantity := 0;
GenJnlLine."VAT Difference" := 0;
...Código de substituição
...TaxJurisdiction.TESTFIELD("Tax Account (Purchases)");
GenJnlLine."Account No." := TaxJurisdiction."Tax Account (Purchases)";
END;
GenJnlLine.Amount := GenJnlLine."VAT Amount";
// Add the following lines.
GenJnlLine."Source Currency Amount" := GenJnlLine."Source Curr. VAT Amount";
GenJnlLine."Source Curr. VAT Base Amount" := 0;
GenJnlLine."VAT Base Amount (LCY)" := 0;
GenJnlLine."VAT Base Amount" := 0;
// End of the added lines.
GenJnlLine."VAT Amount (LCY)" := 0;
GenJnlLine."VAT Amount" := 0;
GenJnlLine.Quantity := 0;
GenJnlLine."VAT Difference" := 0;
... -
Altere o código de função AddSalesLine na Codeunit de calcular imposto sobre vendas (398) do seguinte modo:
Código existente 1..."Round Tax" := TaxArea."Round Tax";
TaxJurisdiction.GET("Tax Jurisdiction Code");
"Is Report-to Jurisdiction" := ("Tax Jurisdiction Code" = TaxJurisdiction."Report-to Jurisdiction");
END;
// Delete the following line.
"Tax Base Amount" := (SalesLine."Line Amount" - SalesLine."Inv. Discount Amount") / ExchangeFactor;
// End of the deleted line.
"Line Amount" := SalesLine."Line Amount" / ExchangeFactor;
"Tax Liable" := SalesLine."Tax Liable";
Quantity := SalesLine."Quantity (Base)";
"Invoice Discount Amount" := SalesLine."Inv. Discount Amount";
...Código de substituição 1
..."Round Tax" := TaxArea."Round Tax";
TaxJurisdiction.GET("Tax Jurisdiction Code");
"Is Report-to Jurisdiction" := ("Tax Jurisdiction Code" = TaxJurisdiction."Report-to Jurisdiction");
END;
// Add the following line.
SetTaxBaseAmount(TempSalesTaxLine,SalesLine."Line Amount" - SalesLine."Inv. Discount Amount",ExchangeFactor,FALSE);
// End of the added line.
"Line Amount" := SalesLine."Line Amount" / ExchangeFactor;
"Tax Liable" := SalesLine."Tax Liable";
Quantity := SalesLine."Quantity (Base)";
"Invoice Discount Amount" := SalesLine."Inv. Discount Amount";
...Código existente 2
...END ELSE BEGIN
"Line Amount" := "Line Amount" + (SalesLine."Line Amount" / ExchangeFactor);
IF SalesLine."Tax Liable" THEN
"Tax Liable" := SalesLine."Tax Liable";
// Delete the following line.
"Tax Base Amount" := "Tax Base Amount" + ((SalesLine."Line Amount" - SalesLine."Inv. Discount Amount") / ExchangeFactor);
// End of the deleted line.
"Tax Amount" := 0;
Quantity := Quantity + SalesLine."Quantity (Base)";
"Invoice Discount Amount" := "Invoice Discount Amount" + SalesLine."Inv. Discount Amount";
MODIFY;
...Código de substituição 2
...END ELSE BEGIN
"Line Amount" := "Line Amount" + (SalesLine."Line Amount" / ExchangeFactor);
IF SalesLine."Tax Liable" THEN
"Tax Liable" := SalesLine."Tax Liable";
// Add the following line.
SetTaxBaseAmount(TempSalesTaxLine,SalesLine."Line Amount" - SalesLine."Inv. Discount Amount",ExchangeFactor,TRUE);
// End of the added line.
"Tax Amount" := 0;
Quantity := Quantity + SalesLine."Quantity (Base)";
"Invoice Discount Amount" := "Invoice Discount Amount" + SalesLine."Inv. Discount Amount";
MODIFY;
... -
Altere o código de função AddSalesInvoiceLines na Codeunit de calcular imposto sobre vendas (398) do seguinte modo:
Código existente 1..."Is Report-to Jurisdiction" :=
("Tax Jurisdiction Code" = TaxJurisdiction."Report-to Jurisdiction");
END;
"Line Amount" := SalesInvoiceLine."Line Amount" / ExchangeFactor;
// Delete the following line.
"Tax Base Amount" := SalesInvoiceLine."VAT Base Amount" / ExchangeFactor;
// End of the deleted line.
Quantity := SalesInvoiceLine.Quantity;
"Tax Liable" := SalesInvoiceLine."Tax Liable";
"Calculation Order" := TaxAreaLine."Calculation Order";
InsertRec := TRUE;
...Código de substituição 1
..."Is Report-to Jurisdiction" :=
("Tax Jurisdiction Code" = TaxJurisdiction."Report-to Jurisdiction");
END;
"Line Amount" := SalesInvoiceLine."Line Amount" / ExchangeFactor;
// Add the following line.
SetTaxBaseAmount(TempSalesTaxLine,SalesInvoiceLine."VAT Base Amount",ExchangeFactor,FALSE);
// End of the added line.
Quantity := SalesInvoiceLine.Quantity;
"Tax Liable" := SalesInvoiceLine."Tax Liable";
"Calculation Order" := TaxAreaLine."Calculation Order";
InsertRec := TRUE;
...Código existente 2
...InsertRec := TRUE;
INSERT;
END ELSE BEGIN
"Line Amount" := "Line Amount" + (SalesInvoiceLine."Line Amount" / ExchangeFactor);
// Delete the following line.
"Tax Base Amount" := "Tax Base Amount" + (SalesInvoiceLine."VAT Base Amount" / ExchangeFactor);
// End of the deleted line.
Quantity := Quantity + SalesInvoiceLine.Quantity;
IF SalesInvoiceLine."Tax Liable" THEN
"Tax Liable" := SalesInvoiceLine."Tax Liable";
InsertRec := FALSE;
...Código de substituição 2
...InsertRec := TRUE;
INSERT;
END ELSE BEGIN
"Line Amount" := "Line Amount" + (SalesInvoiceLine."Line Amount" / ExchangeFactor);
// Add the following line.
SetTaxBaseAmount(TempSalesTaxLine,SalesInvoiceLine."VAT Base Amount",ExchangeFactor,TRUE);
// End of the added line.
Quantity := Quantity + SalesInvoiceLine.Quantity;
IF SalesInvoiceLine."Tax Liable" THEN
"Tax Liable" := SalesInvoiceLine."Tax Liable";
InsertRec := FALSE;
... -
Altere o código de função AddSalesCrMemoLines na Codeunit de calcular imposto sobre vendas (398) do seguinte modo:
Código existente 1..."Is Report-to Jurisdiction" :=
("Tax Jurisdiction Code" = TaxJurisdiction."Report-to Jurisdiction");
END;
"Line Amount" := SalesCrMemoLine."Line Amount" / ExchangeFactor;
// Delete the following line.
"Tax Base Amount" := SalesCrMemoLine."VAT Base Amount" / ExchangeFactor;
// End of the deleted line.
Quantity := SalesCrMemoLine.Quantity;
"Tax Liable" := SalesCrMemoLine."Tax Liable";
"Calculation Order" := TaxAreaLine."Calculation Order";
InsertRec := TRUE;
...Código de substituição 1
..."Is Report-to Jurisdiction" :=
("Tax Jurisdiction Code" = TaxJurisdiction."Report-to Jurisdiction");
END;
"Line Amount" := SalesCrMemoLine."Line Amount" / ExchangeFactor;
// Add the following line.
SetTaxBaseAmount(TempSalesTaxLine,SalesCrMemoLine."VAT Base Amount",ExchangeFactor,FALSE);
// End of the added line.
Quantity := SalesCrMemoLine.Quantity;
"Tax Liable" := SalesCrMemoLine."Tax Liable";
"Calculation Order" := TaxAreaLine."Calculation Order";
InsertRec := TRUE;
...Código existente 2
...InsertRec := TRUE;
INSERT;
END ELSE BEGIN
"Line Amount" := "Line Amount" + (SalesCrMemoLine."Line Amount" / ExchangeFactor);
// Delete the following line.
"Tax Base Amount" := "Tax Base Amount" + (SalesCrMemoLine."VAT Base Amount" / ExchangeFactor);
// End of the deleted line.
Quantity := Quantity + SalesCrMemoLine.Quantity;
IF SalesCrMemoLine."Tax Liable" THEN
"Tax Liable" := SalesCrMemoLine."Tax Liable";
InsertRec := FALSE;
...Código de substituição 2
...InsertRec := TRUE;
INSERT;
END ELSE BEGIN
"Line Amount" := "Line Amount" + (SalesCrMemoLine."Line Amount" / ExchangeFactor);
// Add the following line.
SetTaxBaseAmount(TempSalesTaxLine,SalesCrMemoLine."VAT Base Amount",ExchangeFactor,TRUE);
// End of the added line.
Quantity := Quantity + SalesCrMemoLine.Quantity;
IF SalesCrMemoLine."Tax Liable" THEN
"Tax Liable" := SalesCrMemoLine."Tax Liable";
InsertRec := FALSE;
... -
Altere o código de função AddPurchLine na Codeunit de calcular imposto sobre vendas (398) do seguinte modo:
Código existente 1..."Round Tax" := TaxArea."Round Tax";
TaxJurisdiction.GET("Tax Jurisdiction Code");
"Is Report-to Jurisdiction" := ("Tax Jurisdiction Code" = TaxJurisdiction."Report-to Jurisdiction");
END;
// Delete the following line.
"Tax Base Amount" := (PurchLine."Line Amount" - PurchLine."Inv. Discount Amount") / ExchangeFactor;
// End of the deleted line.
"Line Amount" := PurchLine."Line Amount" / ExchangeFactor;
"Tax Liable" := PurchLine."Tax Liable";
"Use Tax" := PurchLine."Use Tax";
...Código de substituição 1
..."Round Tax" := TaxArea."Round Tax";
TaxJurisdiction.GET("Tax Jurisdiction Code");
"Is Report-to Jurisdiction" := ("Tax Jurisdiction Code" = TaxJurisdiction."Report-to Jurisdiction");
END;
// Add the following line.
SetTaxBaseAmount(TempSalesTaxLine,PurchLine."Line Amount" - PurchLine."Inv. Discount Amount",ExchangeFactor,FALSE);
// End of the added line.
"Line Amount" := PurchLine."Line Amount" / ExchangeFactor;
"Tax Liable" := PurchLine."Tax Liable";
"Use Tax" := PurchLine."Use Tax";
...Código existente 2
...END ELSE BEGIN
"Line Amount" := "Line Amount" + (PurchLine."Line Amount" / ExchangeFactor);
IF PurchLine."Tax Liable" THEN
"Tax Liable" := PurchLine."Tax Liable";
// Delete the following line.
"Tax Base Amount" := "Tax Base Amount" + ((PurchLine."Line Amount" - PurchLine."Inv. Discount Amount") / ExchangeFactor);
// End of the deleted line.
"Tax Amount" := 0;
Quantity := Quantity + PurchLine."Quantity (Base)";
"Invoice Discount Amount" := "Invoice Discount Amount" + PurchLine."Inv. Discount Amount";
MODIFY;
...Código de substituição 2
...END ELSE BEGIN
"Line Amount" := "Line Amount" + (PurchLine."Line Amount" / ExchangeFactor);
IF PurchLine."Tax Liable" THEN
"Tax Liable" := PurchLine."Tax Liable";
// Add the following line.
SetTaxBaseAmount(TempSalesTaxLine,PurchLine."Line Amount" - PurchLine."Inv. Discount Amount",ExchangeFactor,TRUE);
// End of the added line.
"Tax Amount" := 0;
Quantity := Quantity + PurchLine."Quantity (Base)";
"Invoice Discount Amount" := "Invoice Discount Amount" + PurchLine."Inv. Discount Amount";
MODIFY;
... -
Altere o código de função AddPurchInvoiceLines na Codeunit de calcular imposto sobre vendas (398) do seguinte modo:
Código existente 1..."Is Report-to Jurisdiction" :=
("Tax Jurisdiction Code" = TaxJurisdiction."Report-to Jurisdiction");
END;
"Line Amount" := PurchInvLine."Line Amount" / ExchangeFactor;
// Delete the following line.
"Tax Base Amount" := PurchInvLine."VAT Base Amount" / ExchangeFactor;
// End of the deleted line.
Quantity := PurchInvLine.Quantity;
"Tax Liable" := PurchInvLine."Tax Liable";
"Use Tax" := PurchInvLine."Use Tax";
...Código de substituição 1
..."Is Report-to Jurisdiction" :=
("Tax Jurisdiction Code" = TaxJurisdiction."Report-to Jurisdiction");
END;
"Line Amount" := PurchInvLine."Line Amount" / ExchangeFactor;
// Add the following line.
SetTaxBaseAmount(TempSalesTaxLine,PurchInvLine."VAT Base Amount",ExchangeFactor,FALSE);
// End of the added line.
Quantity := PurchInvLine.Quantity;
"Tax Liable" := PurchInvLine."Tax Liable";
"Use Tax" := PurchInvLine."Use Tax";
...Código existente 2
...InsertRec := TRUE;
INSERT;
END ELSE BEGIN
"Line Amount" := "Line Amount" + (PurchInvLine."Line Amount" / ExchangeFactor);
// Delete the following line.
"Tax Base Amount" := "Tax Base Amount" + (PurchInvLine."VAT Base Amount" / ExchangeFactor);
// End of the deleted line.
Quantity := Quantity + PurchInvLine.Quantity;
IF PurchInvLine."Tax Liable" THEN
"Tax Liable" := PurchInvLine."Tax Liable";
InsertRec := FALSE;
...Código de substituição 2
...InsertRec := TRUE;
INSERT;
END ELSE BEGIN
"Line Amount" := "Line Amount" + (PurchInvLine."Line Amount" / ExchangeFactor);
// Add the following line.
SetTaxBaseAmount(TempSalesTaxLine,PurchInvLine."VAT Base Amount",ExchangeFactor,TRUE);
// End of the added line.
Quantity := Quantity + PurchInvLine.Quantity;
IF PurchInvLine."Tax Liable" THEN
"Tax Liable" := PurchInvLine."Tax Liable";
InsertRec := FALSE;
... -
Altere o código de função AddPurchCrMemoLines na Codeunit de calcular imposto sobre vendas (398) do seguinte modo:
Código existente 1..."Is Report-to Jurisdiction" :=
("Tax Jurisdiction Code" = TaxJurisdiction."Report-to Jurisdiction");
END;
"Line Amount" := PurchCrMemoLine."Line Amount" / ExchangeFactor;
// Delete the following line.
"Tax Base Amount" := PurchCrMemoLine."VAT Base Amount" / ExchangeFactor;
// End of the deleted line.
Quantity := PurchCrMemoLine.Quantity;
"Tax Liable" := PurchCrMemoLine."Tax Liable";
"Use Tax" := PurchCrMemoLine."Use Tax";
...Código de substituição 1
..."Is Report-to Jurisdiction" :=
("Tax Jurisdiction Code" = TaxJurisdiction."Report-to Jurisdiction");
END;
"Line Amount" := PurchCrMemoLine."Line Amount" / ExchangeFactor;
// Add the following line.
SetTaxBaseAmount(TempSalesTaxLine,PurchCrMemoLine."VAT Base Amount",ExchangeFactor,FALSE);
// End of the added line.
Quantity := PurchCrMemoLine.Quantity;
"Tax Liable" := PurchCrMemoLine."Tax Liable";
"Use Tax" := PurchCrMemoLine."Use Tax";
...Código existente 2
...InsertRec := TRUE;
INSERT;
END ELSE BEGIN
"Line Amount" := "Line Amount" + (PurchCrMemoLine."Line Amount" / ExchangeFactor);
// Delete the following line.
"Tax Base Amount" := "Tax Base Amount" + (PurchCrMemoLine."VAT Base Amount" / ExchangeFactor);
// End of the deleted line.
Quantity := Quantity + PurchCrMemoLine.Quantity;
IF PurchCrMemoLine."Tax Liable" THEN
"Tax Liable" := PurchCrMemoLine."Tax Liable";
InsertRec := FALSE;
...Código de substituição 2
...InsertRec := TRUE;
INSERT;
END ELSE BEGIN
"Line Amount" := "Line Amount" + (PurchCrMemoLine."Line Amount" / ExchangeFactor);
// Add the following line.
SetTaxBaseAmount(TempSalesTaxLine,PurchCrMemoLine."VAT Base Amount",ExchangeFactor,TRUE);
// End of the added line.
Quantity := Quantity + PurchCrMemoLine.Quantity;
IF PurchCrMemoLine."Tax Liable" THEN
"Tax Liable" := PurchCrMemoLine."Tax Liable";
InsertRec := FALSE;
... -
Altere o código de função AddServiceLine na Codeunit de calcular imposto sobre vendas (398) do seguinte modo:
Código existente 1..."Round Tax" := TaxArea."Round Tax";
TaxJurisdiction.GET("Tax Jurisdiction Code");
"Is Report-to Jurisdiction" := ("Tax Jurisdiction Code" = TaxJurisdiction."Report-to Jurisdiction");
END;
// Delete the following line.
"Tax Base Amount" := (ServiceLine."Line Amount" - ServiceLine."Inv. Discount Amount") / ExchangeFactor;
// End of the deleted line.
"Line Amount" := ServiceLine."Line Amount" / ExchangeFactor;
"Tax Liable" := ServiceLine."Tax Liable";
Quantity := ServiceLine."Quantity (Base)";
"Invoice Discount Amount" := ServiceLine."Inv. Discount Amount";
...Código de substituição 1
..."Round Tax" := TaxArea."Round Tax";
TaxJurisdiction.GET("Tax Jurisdiction Code");
"Is Report-to Jurisdiction" := ("Tax Jurisdiction Code" = TaxJurisdiction."Report-to Jurisdiction");
END;
// Add the following line.
SetTaxBaseAmount(TempSalesTaxLine,ServiceLine."Line Amount" - ServiceLine."Inv. Discount Amount",ExchangeFactor,FALSE);
// End of the added line.
"Line Amount" := ServiceLine."Line Amount" / ExchangeFactor;
"Tax Liable" := ServiceLine."Tax Liable";
Quantity := ServiceLine."Quantity (Base)";
"Invoice Discount Amount" := ServiceLine."Inv. Discount Amount";
...Código existente 2
...END ELSE BEGIN
"Line Amount" := "Line Amount" + (ServiceLine."Line Amount" / ExchangeFactor);
IF ServiceLine."Tax Liable" THEN
"Tax Liable" := ServiceLine."Tax Liable";
// Delete the following line.
"Tax Base Amount" :=
"Tax Base Amount" + ((ServiceLine."Line Amount" - ServiceLine."Inv. Discount Amount") / ExchangeFactor);
// End of the deleted line.
"Tax Amount" := 0;
Quantity := Quantity + ServiceLine."Quantity (Base)";
"Invoice Discount Amount" := "Invoice Discount Amount" + ServiceLine."Inv. Discount Amount";
MODIFY;
...Código de substituição 2
...END ELSE BEGIN
"Line Amount" := "Line Amount" + (ServiceLine."Line Amount" / ExchangeFactor);
IF ServiceLine."Tax Liable" THEN
"Tax Liable" := ServiceLine."Tax Liable";
// Add the following line.
SetTaxBaseAmount(TempSalesTaxLine,ServiceLine."Line Amount" - ServiceLine."Inv. Discount Amount",ExchangeFactor,TRUE);
// End of the added line.
"Tax Amount" := 0;
Quantity := Quantity + ServiceLine."Quantity (Base)";
"Invoice Discount Amount" := "Invoice Discount Amount" + ServiceLine."Inv. Discount Amount";
MODIFY;
... -
Altere o código de função AddServInvoiceLines na Codeunit de calcular imposto sobre vendas (398) do seguinte modo:
Código existente 1..."Is Report-to Jurisdiction" :=
("Tax Jurisdiction Code" = TaxJurisdiction."Report-to Jurisdiction");
END;
"Line Amount" := ServInvLine."Line Amount" / ExchangeFactor;
// Delete the following lines.
"Tax Base Amount" := ServInvLine."VAT Base Amount" / ExchangeFactor;
Quantity := ServInvLine.Quantity;
"Tax Liable" := ServInvLine."Tax Liable";
// End of the deleted line.
"Calculation Order" := TaxAreaLine."Calculation Order";
InsertRec := TRUE;
INSERT;
...Código de substituição 1
..."Is Report-to Jurisdiction" :=
("Tax Jurisdiction Code" = TaxJurisdiction."Report-to Jurisdiction");
END;
"Line Amount" := ServInvLine."Line Amount" / ExchangeFactor;
// Add the following lines.
SetTaxBaseAmount(TempSalesTaxLine,ServInvLine."VAT Base Amount",ExchangeFactor,FALSE);
Quantity := ServInvLine.Quantity;
"Tax Liable" := ServInvLine."Tax Liable";
// End of the added lines.
"Calculation Order" := TaxAreaLine."Calculation Order";
InsertRec := TRUE;
INSERT;
...Código existente 2
...InsertRec := TRUE;
INSERT;
END ELSE BEGIN
"Line Amount" := "Line Amount" + (ServInvLine."Line Amount" / ExchangeFactor);
// Delete the following line.
"Tax Base Amount" := "Tax Base Amount" + (ServInvLine."VAT Base Amount" / ExchangeFactor);
// End of the deleted line.
Quantity := Quantity + ServInvLine.Quantity;
IF ServInvLine."Tax Liable" THEN
"Tax Liable" := ServInvLine."Tax Liable";
InsertRec := FALSE;
...Código de substituição 2
...InsertRec := TRUE;
INSERT;
END ELSE BEGIN
"Line Amount" := "Line Amount" + (ServInvLine."Line Amount" / ExchangeFactor);
// Add the following line.
SetTaxBaseAmount(TempSalesTaxLine,ServInvLine."VAT Base Amount",ExchangeFactor,TRUE);
// End of the added line.
Quantity := Quantity + ServInvLine.Quantity;
IF ServInvLine."Tax Liable" THEN
"Tax Liable" := ServInvLine."Tax Liable";
InsertRec := FALSE;
... -
Altere o código de função AddServCrMemoLines na Codeunit de calcular imposto sobre vendas (398) do seguinte modo:
Código existente 1..."Is Report-to Jurisdiction" :=
("Tax Jurisdiction Code" = TaxJurisdiction."Report-to Jurisdiction");
END;
"Line Amount" := ServCrMemoLine."Line Amount" / ExchangeFactor;
// Delete the following line.
"Tax Base Amount" := ServCrMemoLine."VAT Base Amount" / ExchangeFactor;
// End of the deleted line.
Quantity := ServCrMemoLine.Quantity;
"Tax Liable" := ServCrMemoLine."Tax Liable";
"Calculation Order" := TaxAreaLine."Calculation Order";
...Código de substituição 1
..."Is Report-to Jurisdiction" :=
("Tax Jurisdiction Code" = TaxJurisdiction."Report-to Jurisdiction");
END;
"Line Amount" := ServCrMemoLine."Line Amount" / ExchangeFactor;
// Add the following line.
SetTaxBaseAmount(TempSalesTaxLine,ServCrMemoLine."VAT Base Amount",ExchangeFactor,FALSE);
// End of the added line.
Quantity := ServCrMemoLine.Quantity;
"Tax Liable" := ServCrMemoLine."Tax Liable";
"Calculation Order" := TaxAreaLine."Calculation Order";
...Código existente 2
...InsertRec := TRUE;
INSERT;
END ELSE BEGIN
"Line Amount" := "Line Amount" + (ServCrMemoLine."Line Amount" / ExchangeFactor);
// Delete the following line.
"Tax Base Amount" := "Tax Base Amount" + (ServCrMemoLine."VAT Base Amount" / ExchangeFactor);
// End of the deleted line.
Quantity := Quantity + ServCrMemoLine.Quantity;
IF ServCrMemoLine."Tax Liable" THEN
"Tax Liable" := ServCrMemoLine."Tax Liable";
InsertRec := FALSE;
...Código de substituição 2
...InsertRec := TRUE;
INSERT;
END ELSE BEGIN
"Line Amount" := "Line Amount" + (ServCrMemoLine."Line Amount" / ExchangeFactor);
// Add the following line.
SetTaxBaseAmount(TempSalesTaxLine,ServCrMemoLine."VAT Base Amount",ExchangeFactor,TRUE);
// End of the added line.
Quantity := Quantity + ServCrMemoLine.Quantity;
IF ServCrMemoLine."Tax Liable" THEN
"Tax Liable" := ServCrMemoLine."Tax Liable";
InsertRec := FALSE;
... -
Adicione uma função SetTaxBaseAmount na Codeunit de calcular imposto sobre vendas (398) do seguinte modo:
LOCAL PROCEDURE SetTaxBaseAmount@1020031(VAR SalesTaxAmountLine@1020001 : Record 10011;Value@1020000 : Decimal;ExchangeFactor@1020002 : Decimal;Increment@1020003 : Boolean); BEGIN
WITH SalesTaxAmountLine DO BEGIN
IF Increment THEN
"Tax Base Amount FCY" += Value
ELSE
"Tax Base Amount FCY" := Value;
"Tax Base Amount" := "Tax Base Amount FCY" / ExchangeFactor;
END;
END;
Pré-requisitos
Tem de ter um dos seguintes produtos instalado para aplicar esta correcção:
-
A versão norte-americana do Microsoft Dynamics NAV 2009 R2
-
A versão norte-americana do Microsoft Dynamics NAV 2009 Service Pack 1
Informações de remoção
Não é possível remover esta correcção.
Estado
A Microsoft confirmou que este é um problema nos produtos da Microsoft listados na secção "Aplica-se a".
Nota Este é um artigo "Publicação rápida" criado diretamente a partir da organização de suporte da Microsoft. As informações contidas neste documento são fornecidas como-se em resposta a questões emergentes. Como resultado da urgência na sua disponibilização, os materiais podem incluir erros tipográficos e podem ser revistos em qualquer altura sem aviso prévio. Para outras considerações, consulte os Termos de utilização .
