Bu makale, Microsoft aşağıdaki ülke ve dil yerel ayarları için geçerlidir.
-
İngilizce (Kanada) (tr-ca)
-
İngilizce (ABD) (en-us)
-
İspanyolca (Meksika) (es-mx)
-
Fransızca (Kanada) (fr-ca)
Belirtiler
CAD ilave raporlama para birimi değeri olarak Genel Muhasebe Kurulumu tablosunda Microsoft Dynamics NAV 2009 Kuzey Amerika sürümü iletişim kutusunda ayarladığınız olduğunu varsayalım. Vergi içeren bir satınalma faturası deftere nakil yaptığınızda, aşağıdaki hata iletisini alırsınız:
G/M Girişi tablosunda tutarsızlıklara neden olur çünkü işlem tamamlanamıyor. Nerede ve nasıl tutarlı işlevi hareket hatanın nedenini bulmak için kullanıldığını denetleyin.
Bu sorun aşağıdaki ürünlerde oluşur:
-
Microsoft Dynamics NAV 2009 R2 Kuzey Amerika sürümü
-
Kuzey Amerika sürümü Microsoft Dynamics NAV 2009 Service Pack 1
Çözüm
Düzeltme bilgileri
Artık Microsoft tarafından desteklenen bir düzeltme sağlanmaktadır. Ancak bunun yalnızca bu makalede anlatılan sorunu düzeltmesi amaçlanmıştır. Yalnızca bu özel sorunla karşılaşmış olan sistemlere uygulayın. Bu düzeltme ek sınama uygulanabilir. Bu nedenle, bu sorundan ciddi bir şekilde etkilenmiyorsanız, Microsoft Dynamics NAV 2009 sonraki hizmet paketini veya, bu düzeltmeyi içeren bir sonraki Microsoft Dynamics NAV sürümü için beklemek öneririz.
Not: Özel durumlarda, destek aramaları teknik destek uzmanı Microsoft Dynamics ve ilgili ürünlere yönelik iptal edilebilir çözeceğini giderleri belirleyen belirli bir güncelleştirmenin sorununuzu. Ek destek sorularına ve söz konusu güncelleştirme için geçerli olmayan sorunlara normal destek ücretleri uygulanır.
Yükleme bilgileri
Microsoft, programlama örneklerini yalnızca gösterim amacıyla zımni veya açık garanti olmadan sağlar. Bu, satılabilirlik veya belirli bir amaca uygunluk açısından zımni garantileri içerir ancak bunlarla sınırlı değildir. Bu makale, gösterilen programlama dilini, yordamları oluşturmak ve yordamlardan hata ayıklamak için kullanılan araçları bildiğinizi varsayar. Microsoft destek mühendisleri belirli bir yordamın işlevselliğinin açıklanmasına yardımcı olabilirler, ancak ilave işlevsellik sağlamak için bu örnekleri değiştirmezler veya belirli gereksinimlerinizi karşılayacak şekilde yordamları yapılandırmazlar.
Not: Bu düzeltmeyi yüklemeden önce tüm Microsoft Navision istemcisi kullanıcılar sistem oturum doğrulayın. Bu, Microsoft Navision uygulama Hizmetleri (NAS) istemci kullanıcıları içerir. Bu düzeltmeyi uyguladığınızda yalnızca istemci kullanıcının oturum açmış olması gerekir.
Bu düzeltmeyi uygulamak için bir geliştirici lisansı olması gerekir.
Kullanıcı hesabının Windows oturumu açma penceresini veya veritabanı oturumu açma penceresi "Süper" rol kimliği atanması öneririz Kullanıcı hesabı "Süper" rol Kimliği atanamaz, kullanıcı hesabı aşağıdaki izinlere sahip olduğunu doğrulamanız gerekir:
-
Nesnenin, değiştirme değişiklik yapma izni.
-
Execute izni Sistem nesne kimliği 5210 nesnenin ve nesne kimliği 9015 sistem nesnesi için.
Not: Veri onarım gerçekleştirmek zorunda sürece veri depoları haklarına sahip olmanız gerekmez.
Kod değişiklikleri
Not: Her zaman, uygulamadan önce test kodu denetimli bir ortamda üretim bilgisayarlarınıza düzeltmeler giderir.
Bu sorunu gidermek için şu adımları izleyin:
-
Alanları (10011) satış vergisi tutar Satırı tablosundaki kodu aşağıdaki gibi değiştirin:
Varolan kodu...ESM=Es Informe jurisdicci¢n;
FRC=Est une juridiction fiscale;
ENC=Is Report-to Jurisdiction];
Editable=No }
}
KEYS
{
{ ;Tax Area Code for Key,Tax Jurisdiction Code,Tax %,Tax Group Code,Expense/Capitalize,Tax Type,Use Tax;
...Kod değiştirme
...
ESM=Es Informe jurisdicci¢n;
FRC=Est une juridiction fiscale;
ENC=Is Report-to Jurisdiction];
Editable=No }
// Add the following line.
{ 10044; ;Tax Base Amount FCY ;Decimal }
// End of the added line.
}
KEYS
{
{ ;Tax Area Code for Key,Tax Jurisdiction Code,Tax %,Tax Group Code,Expense/Capitalize,Tax Type,Use Tax;
... -
Satış sonrası kod (80) PostSalesTaxToGL işlevinde kodu aşağıdaki gibi değiştirin:
Varolan kodu...END;
GenJnlLine."Tax Jurisdiction Code" := TempSalesTaxAmtLine."Tax Jurisdiction Code";
IF TempSalesTaxAmtLine."Tax Amount" <> 0 THEN BEGIN
RemSalesTaxSrcAmt := RemSalesTaxSrcAmt +
// Delete the following lines.
CurrExchRate.ExchangeAmtLCYToFCY(
UseDate,SalesHeader."Currency Code",TempSalesTaxAmtLine."Tax Amount",SalesHeader."Currency Factor");
// End of the deleted lines.
GenJnlLine."Source Curr. VAT Amount" :=
SalesTaxCalculate.ArithmeticRound(RemSalesTaxSrcAmt,Currency."Amount Rounding Precision");
RemSalesTaxSrcAmt := RemSalesTaxSrcAmt - GenJnlLine."Source Curr. VAT Amount";
RemSalesTaxAmt := RemSalesTaxAmt + TempSalesTaxAmtLine."Tax Amount";
...Kod değiştirme
...END;
GenJnlLine."Tax Jurisdiction Code" := TempSalesTaxAmtLine."Tax Jurisdiction Code";
IF TempSalesTaxAmtLine."Tax Amount" <> 0 THEN BEGIN
RemSalesTaxSrcAmt := RemSalesTaxSrcAmt +
// Add the following lines.
TempSalesTaxAmtLine."Tax Base Amount FCY" * TempSalesTaxAmtLine."Tax %" / 100;
// End of the added lines.
GenJnlLine."Source Curr. VAT Amount" :=
SalesTaxCalculate.ArithmeticRound(RemSalesTaxSrcAmt,Currency."Amount Rounding Precision");
RemSalesTaxSrcAmt := RemSalesTaxSrcAmt - GenJnlLine."Source Curr. VAT Amount";
RemSalesTaxAmt := RemSalesTaxAmt + TempSalesTaxAmtLine."Tax Amount";
... -
Satınalma. PostSalesTaxToGL işlev kodu değiştirmek-posta kod (90) aşağıdaki gibi:
Varolan kodu...END;
GenJnlLine."Tax Jurisdiction Code" := TempSalesTaxAmtLine."Tax Jurisdiction Code";
IF TempSalesTaxAmtLine."Tax Amount" <> 0 THEN BEGIN
RemSalesTaxSrcAmt := RemSalesTaxSrcAmt +
// Delete the following lines.
CurrExchRate.ExchangeAmtLCYToFCY(
Usedate,PurchHeader."Currency Code",TempSalesTaxAmtLine."Tax Amount",PurchHeader."Currency Factor");
// End of the deleted lines.
GenJnlLine."Source Curr. VAT Amount" :=
SalesTaxCalculate.ArithmeticRound(RemSalesTaxSrcAmt,Currency."Amount Rounding Precision");
RemSalesTaxSrcAmt := RemSalesTaxSrcAmt - GenJnlLine."Source Curr. VAT Amount";
RemSalesTaxAmt := RemSalesTaxAmt + TempSalesTaxAmtLine."Tax Amount";
...Kod değiştirme
...END;
GenJnlLine."Tax Jurisdiction Code" := TempSalesTaxAmtLine."Tax Jurisdiction Code";
IF TempSalesTaxAmtLine."Tax Amount" <> 0 THEN BEGIN
RemSalesTaxSrcAmt := RemSalesTaxSrcAmt +
// Add the following line.
TempSalesTaxAmtLine."Tax Base Amount FCY" * TempSalesTaxAmtLine."Tax %" / 100;
// End of the added line.
GenJnlLine."Source Curr. VAT Amount" :=
SalesTaxCalculate.ArithmeticRound(RemSalesTaxSrcAmt,Currency."Amount Rounding Precision");
RemSalesTaxSrcAmt := RemSalesTaxSrcAmt - GenJnlLine."Source Curr. VAT Amount";
RemSalesTaxAmt := RemSalesTaxAmt + TempSalesTaxAmtLine."Tax Amount";
... -
Satınalma. PostProvincialSalesTaxToGL işlev kodu değiştirmek-posta kod (90) aşağıdaki gibi:
Varolan kodu...TaxJurisdiction.TESTFIELD("Tax Account (Purchases)");
GenJnlLine."Account No." := TaxJurisdiction."Tax Account (Purchases)";
END;
GenJnlLine.Amount := GenJnlLine."VAT Amount";
// Delete the following lines.
GenJnlLine."Source Curr. VAT Base Amount" := 0;
GenJnlLine."VAT Base Amount (LCY)" := 0;
GenJnlLine."VAT Base Amount" := 0;
GenJnlLine."Source Curr. VAT Amount" := 0;
// End of the deleted lines.
GenJnlLine."VAT Amount (LCY)" := 0;
GenJnlLine."VAT Amount" := 0;
GenJnlLine.Quantity := 0;
GenJnlLine."VAT Difference" := 0;
...Kod değiştirme
...TaxJurisdiction.TESTFIELD("Tax Account (Purchases)");
GenJnlLine."Account No." := TaxJurisdiction."Tax Account (Purchases)";
END;
GenJnlLine.Amount := GenJnlLine."VAT Amount";
// Add the following lines.
GenJnlLine."Source Currency Amount" := GenJnlLine."Source Curr. VAT Amount";
GenJnlLine."Source Curr. VAT Base Amount" := 0;
GenJnlLine."VAT Base Amount (LCY)" := 0;
GenJnlLine."VAT Base Amount" := 0;
// End of the added lines.
GenJnlLine."VAT Amount (LCY)" := 0;
GenJnlLine."VAT Amount" := 0;
GenJnlLine.Quantity := 0;
GenJnlLine."VAT Difference" := 0;
... -
Satış vergisi hesaplamasını kod (398) AddSalesLine işlevinde kodu aşağıdaki gibi değiştirin:
Varolan kodu 1..."Round Tax" := TaxArea."Round Tax";
TaxJurisdiction.GET("Tax Jurisdiction Code");
"Is Report-to Jurisdiction" := ("Tax Jurisdiction Code" = TaxJurisdiction."Report-to Jurisdiction");
END;
// Delete the following line.
"Tax Base Amount" := (SalesLine."Line Amount" - SalesLine."Inv. Discount Amount") / ExchangeFactor;
// End of the deleted line.
"Line Amount" := SalesLine."Line Amount" / ExchangeFactor;
"Tax Liable" := SalesLine."Tax Liable";
Quantity := SalesLine."Quantity (Base)";
"Invoice Discount Amount" := SalesLine."Inv. Discount Amount";
...Değiştirme kodu 1
..."Round Tax" := TaxArea."Round Tax";
TaxJurisdiction.GET("Tax Jurisdiction Code");
"Is Report-to Jurisdiction" := ("Tax Jurisdiction Code" = TaxJurisdiction."Report-to Jurisdiction");
END;
// Add the following line.
SetTaxBaseAmount(TempSalesTaxLine,SalesLine."Line Amount" - SalesLine."Inv. Discount Amount",ExchangeFactor,FALSE);
// End of the added line.
"Line Amount" := SalesLine."Line Amount" / ExchangeFactor;
"Tax Liable" := SalesLine."Tax Liable";
Quantity := SalesLine."Quantity (Base)";
"Invoice Discount Amount" := SalesLine."Inv. Discount Amount";
...Varolan kodu 2
...END ELSE BEGIN
"Line Amount" := "Line Amount" + (SalesLine."Line Amount" / ExchangeFactor);
IF SalesLine."Tax Liable" THEN
"Tax Liable" := SalesLine."Tax Liable";
// Delete the following line.
"Tax Base Amount" := "Tax Base Amount" + ((SalesLine."Line Amount" - SalesLine."Inv. Discount Amount") / ExchangeFactor);
// End of the deleted line.
"Tax Amount" := 0;
Quantity := Quantity + SalesLine."Quantity (Base)";
"Invoice Discount Amount" := "Invoice Discount Amount" + SalesLine."Inv. Discount Amount";
MODIFY;
...Değiştirme kodu 2
...END ELSE BEGIN
"Line Amount" := "Line Amount" + (SalesLine."Line Amount" / ExchangeFactor);
IF SalesLine."Tax Liable" THEN
"Tax Liable" := SalesLine."Tax Liable";
// Add the following line.
SetTaxBaseAmount(TempSalesTaxLine,SalesLine."Line Amount" - SalesLine."Inv. Discount Amount",ExchangeFactor,TRUE);
// End of the added line.
"Tax Amount" := 0;
Quantity := Quantity + SalesLine."Quantity (Base)";
"Invoice Discount Amount" := "Invoice Discount Amount" + SalesLine."Inv. Discount Amount";
MODIFY;
... -
Satış vergisi hesaplamasını kod (398) AddSalesInvoiceLines işlevinde kodu aşağıdaki gibi değiştirin:
Varolan kodu 1..."Is Report-to Jurisdiction" :=
("Tax Jurisdiction Code" = TaxJurisdiction."Report-to Jurisdiction");
END;
"Line Amount" := SalesInvoiceLine."Line Amount" / ExchangeFactor;
// Delete the following line.
"Tax Base Amount" := SalesInvoiceLine."VAT Base Amount" / ExchangeFactor;
// End of the deleted line.
Quantity := SalesInvoiceLine.Quantity;
"Tax Liable" := SalesInvoiceLine."Tax Liable";
"Calculation Order" := TaxAreaLine."Calculation Order";
InsertRec := TRUE;
...Değiştirme kodu 1
..."Is Report-to Jurisdiction" :=
("Tax Jurisdiction Code" = TaxJurisdiction."Report-to Jurisdiction");
END;
"Line Amount" := SalesInvoiceLine."Line Amount" / ExchangeFactor;
// Add the following line.
SetTaxBaseAmount(TempSalesTaxLine,SalesInvoiceLine."VAT Base Amount",ExchangeFactor,FALSE);
// End of the added line.
Quantity := SalesInvoiceLine.Quantity;
"Tax Liable" := SalesInvoiceLine."Tax Liable";
"Calculation Order" := TaxAreaLine."Calculation Order";
InsertRec := TRUE;
...Varolan kodu 2
...InsertRec := TRUE;
INSERT;
END ELSE BEGIN
"Line Amount" := "Line Amount" + (SalesInvoiceLine."Line Amount" / ExchangeFactor);
// Delete the following line.
"Tax Base Amount" := "Tax Base Amount" + (SalesInvoiceLine."VAT Base Amount" / ExchangeFactor);
// End of the deleted line.
Quantity := Quantity + SalesInvoiceLine.Quantity;
IF SalesInvoiceLine."Tax Liable" THEN
"Tax Liable" := SalesInvoiceLine."Tax Liable";
InsertRec := FALSE;
...Değiştirme kodu 2
...InsertRec := TRUE;
INSERT;
END ELSE BEGIN
"Line Amount" := "Line Amount" + (SalesInvoiceLine."Line Amount" / ExchangeFactor);
// Add the following line.
SetTaxBaseAmount(TempSalesTaxLine,SalesInvoiceLine."VAT Base Amount",ExchangeFactor,TRUE);
// End of the added line.
Quantity := Quantity + SalesInvoiceLine.Quantity;
IF SalesInvoiceLine."Tax Liable" THEN
"Tax Liable" := SalesInvoiceLine."Tax Liable";
InsertRec := FALSE;
... -
Satış vergisi hesaplamasını kod (398) AddSalesCrMemoLines işlevinde kodu aşağıdaki gibi değiştirin:
Varolan kodu 1..."Is Report-to Jurisdiction" :=
("Tax Jurisdiction Code" = TaxJurisdiction."Report-to Jurisdiction");
END;
"Line Amount" := SalesCrMemoLine."Line Amount" / ExchangeFactor;
// Delete the following line.
"Tax Base Amount" := SalesCrMemoLine."VAT Base Amount" / ExchangeFactor;
// End of the deleted line.
Quantity := SalesCrMemoLine.Quantity;
"Tax Liable" := SalesCrMemoLine."Tax Liable";
"Calculation Order" := TaxAreaLine."Calculation Order";
InsertRec := TRUE;
...Değiştirme kodu 1
..."Is Report-to Jurisdiction" :=
("Tax Jurisdiction Code" = TaxJurisdiction."Report-to Jurisdiction");
END;
"Line Amount" := SalesCrMemoLine."Line Amount" / ExchangeFactor;
// Add the following line.
SetTaxBaseAmount(TempSalesTaxLine,SalesCrMemoLine."VAT Base Amount",ExchangeFactor,FALSE);
// End of the added line.
Quantity := SalesCrMemoLine.Quantity;
"Tax Liable" := SalesCrMemoLine."Tax Liable";
"Calculation Order" := TaxAreaLine."Calculation Order";
InsertRec := TRUE;
...Varolan kodu 2
...InsertRec := TRUE;
INSERT;
END ELSE BEGIN
"Line Amount" := "Line Amount" + (SalesCrMemoLine."Line Amount" / ExchangeFactor);
// Delete the following line.
"Tax Base Amount" := "Tax Base Amount" + (SalesCrMemoLine."VAT Base Amount" / ExchangeFactor);
// End of the deleted line.
Quantity := Quantity + SalesCrMemoLine.Quantity;
IF SalesCrMemoLine."Tax Liable" THEN
"Tax Liable" := SalesCrMemoLine."Tax Liable";
InsertRec := FALSE;
...Değiştirme kodu 2
...InsertRec := TRUE;
INSERT;
END ELSE BEGIN
"Line Amount" := "Line Amount" + (SalesCrMemoLine."Line Amount" / ExchangeFactor);
// Add the following line.
SetTaxBaseAmount(TempSalesTaxLine,SalesCrMemoLine."VAT Base Amount",ExchangeFactor,TRUE);
// End of the added line.
Quantity := Quantity + SalesCrMemoLine.Quantity;
IF SalesCrMemoLine."Tax Liable" THEN
"Tax Liable" := SalesCrMemoLine."Tax Liable";
InsertRec := FALSE;
... -
Satış vergisi hesaplamasını kod (398) AddPurchLine işlevinde kodu aşağıdaki gibi değiştirin:
Varolan kodu 1..."Round Tax" := TaxArea."Round Tax";
TaxJurisdiction.GET("Tax Jurisdiction Code");
"Is Report-to Jurisdiction" := ("Tax Jurisdiction Code" = TaxJurisdiction."Report-to Jurisdiction");
END;
// Delete the following line.
"Tax Base Amount" := (PurchLine."Line Amount" - PurchLine."Inv. Discount Amount") / ExchangeFactor;
// End of the deleted line.
"Line Amount" := PurchLine."Line Amount" / ExchangeFactor;
"Tax Liable" := PurchLine."Tax Liable";
"Use Tax" := PurchLine."Use Tax";
...Değiştirme kodu 1
..."Round Tax" := TaxArea."Round Tax";
TaxJurisdiction.GET("Tax Jurisdiction Code");
"Is Report-to Jurisdiction" := ("Tax Jurisdiction Code" = TaxJurisdiction."Report-to Jurisdiction");
END;
// Add the following line.
SetTaxBaseAmount(TempSalesTaxLine,PurchLine."Line Amount" - PurchLine."Inv. Discount Amount",ExchangeFactor,FALSE);
// End of the added line.
"Line Amount" := PurchLine."Line Amount" / ExchangeFactor;
"Tax Liable" := PurchLine."Tax Liable";
"Use Tax" := PurchLine."Use Tax";
...Varolan kodu 2
...END ELSE BEGIN
"Line Amount" := "Line Amount" + (PurchLine."Line Amount" / ExchangeFactor);
IF PurchLine."Tax Liable" THEN
"Tax Liable" := PurchLine."Tax Liable";
// Delete the following line.
"Tax Base Amount" := "Tax Base Amount" + ((PurchLine."Line Amount" - PurchLine."Inv. Discount Amount") / ExchangeFactor);
// End of the deleted line.
"Tax Amount" := 0;
Quantity := Quantity + PurchLine."Quantity (Base)";
"Invoice Discount Amount" := "Invoice Discount Amount" + PurchLine."Inv. Discount Amount";
MODIFY;
...Değiştirme kodu 2
...END ELSE BEGIN
"Line Amount" := "Line Amount" + (PurchLine."Line Amount" / ExchangeFactor);
IF PurchLine."Tax Liable" THEN
"Tax Liable" := PurchLine."Tax Liable";
// Add the following line.
SetTaxBaseAmount(TempSalesTaxLine,PurchLine."Line Amount" - PurchLine."Inv. Discount Amount",ExchangeFactor,TRUE);
// End of the added line.
"Tax Amount" := 0;
Quantity := Quantity + PurchLine."Quantity (Base)";
"Invoice Discount Amount" := "Invoice Discount Amount" + PurchLine."Inv. Discount Amount";
MODIFY;
... -
Satış vergisi hesaplamasını kod (398) AddPurchInvoiceLines işlevinde kodu aşağıdaki gibi değiştirin:
Varolan kodu 1..."Is Report-to Jurisdiction" :=
("Tax Jurisdiction Code" = TaxJurisdiction."Report-to Jurisdiction");
END;
"Line Amount" := PurchInvLine."Line Amount" / ExchangeFactor;
// Delete the following line.
"Tax Base Amount" := PurchInvLine."VAT Base Amount" / ExchangeFactor;
// End of the deleted line.
Quantity := PurchInvLine.Quantity;
"Tax Liable" := PurchInvLine."Tax Liable";
"Use Tax" := PurchInvLine."Use Tax";
...Değiştirme kodu 1
..."Is Report-to Jurisdiction" :=
("Tax Jurisdiction Code" = TaxJurisdiction."Report-to Jurisdiction");
END;
"Line Amount" := PurchInvLine."Line Amount" / ExchangeFactor;
// Add the following line.
SetTaxBaseAmount(TempSalesTaxLine,PurchInvLine."VAT Base Amount",ExchangeFactor,FALSE);
// End of the added line.
Quantity := PurchInvLine.Quantity;
"Tax Liable" := PurchInvLine."Tax Liable";
"Use Tax" := PurchInvLine."Use Tax";
...Varolan kodu 2
...InsertRec := TRUE;
INSERT;
END ELSE BEGIN
"Line Amount" := "Line Amount" + (PurchInvLine."Line Amount" / ExchangeFactor);
// Delete the following line.
"Tax Base Amount" := "Tax Base Amount" + (PurchInvLine."VAT Base Amount" / ExchangeFactor);
// End of the deleted line.
Quantity := Quantity + PurchInvLine.Quantity;
IF PurchInvLine."Tax Liable" THEN
"Tax Liable" := PurchInvLine."Tax Liable";
InsertRec := FALSE;
...Değiştirme kodu 2
...InsertRec := TRUE;
INSERT;
END ELSE BEGIN
"Line Amount" := "Line Amount" + (PurchInvLine."Line Amount" / ExchangeFactor);
// Add the following line.
SetTaxBaseAmount(TempSalesTaxLine,PurchInvLine."VAT Base Amount",ExchangeFactor,TRUE);
// End of the added line.
Quantity := Quantity + PurchInvLine.Quantity;
IF PurchInvLine."Tax Liable" THEN
"Tax Liable" := PurchInvLine."Tax Liable";
InsertRec := FALSE;
... -
Satış vergisi hesaplamasını kod (398) AddPurchCrMemoLines işlevinde kodu aşağıdaki gibi değiştirin:
Varolan kodu 1..."Is Report-to Jurisdiction" :=
("Tax Jurisdiction Code" = TaxJurisdiction."Report-to Jurisdiction");
END;
"Line Amount" := PurchCrMemoLine."Line Amount" / ExchangeFactor;
// Delete the following line.
"Tax Base Amount" := PurchCrMemoLine."VAT Base Amount" / ExchangeFactor;
// End of the deleted line.
Quantity := PurchCrMemoLine.Quantity;
"Tax Liable" := PurchCrMemoLine."Tax Liable";
"Use Tax" := PurchCrMemoLine."Use Tax";
...Değiştirme kodu 1
..."Is Report-to Jurisdiction" :=
("Tax Jurisdiction Code" = TaxJurisdiction."Report-to Jurisdiction");
END;
"Line Amount" := PurchCrMemoLine."Line Amount" / ExchangeFactor;
// Add the following line.
SetTaxBaseAmount(TempSalesTaxLine,PurchCrMemoLine."VAT Base Amount",ExchangeFactor,FALSE);
// End of the added line.
Quantity := PurchCrMemoLine.Quantity;
"Tax Liable" := PurchCrMemoLine."Tax Liable";
"Use Tax" := PurchCrMemoLine."Use Tax";
...Varolan kodu 2
...InsertRec := TRUE;
INSERT;
END ELSE BEGIN
"Line Amount" := "Line Amount" + (PurchCrMemoLine."Line Amount" / ExchangeFactor);
// Delete the following line.
"Tax Base Amount" := "Tax Base Amount" + (PurchCrMemoLine."VAT Base Amount" / ExchangeFactor);
// End of the deleted line.
Quantity := Quantity + PurchCrMemoLine.Quantity;
IF PurchCrMemoLine."Tax Liable" THEN
"Tax Liable" := PurchCrMemoLine."Tax Liable";
InsertRec := FALSE;
...Değiştirme kodu 2
...InsertRec := TRUE;
INSERT;
END ELSE BEGIN
"Line Amount" := "Line Amount" + (PurchCrMemoLine."Line Amount" / ExchangeFactor);
// Add the following line.
SetTaxBaseAmount(TempSalesTaxLine,PurchCrMemoLine."VAT Base Amount",ExchangeFactor,TRUE);
// End of the added line.
Quantity := Quantity + PurchCrMemoLine.Quantity;
IF PurchCrMemoLine."Tax Liable" THEN
"Tax Liable" := PurchCrMemoLine."Tax Liable";
InsertRec := FALSE;
... -
Satış vergisi hesaplamasını kod (398) AddServiceLine işlevinde kodu aşağıdaki gibi değiştirin:
Varolan kodu 1..."Round Tax" := TaxArea."Round Tax";
TaxJurisdiction.GET("Tax Jurisdiction Code");
"Is Report-to Jurisdiction" := ("Tax Jurisdiction Code" = TaxJurisdiction."Report-to Jurisdiction");
END;
// Delete the following line.
"Tax Base Amount" := (ServiceLine."Line Amount" - ServiceLine."Inv. Discount Amount") / ExchangeFactor;
// End of the deleted line.
"Line Amount" := ServiceLine."Line Amount" / ExchangeFactor;
"Tax Liable" := ServiceLine."Tax Liable";
Quantity := ServiceLine."Quantity (Base)";
"Invoice Discount Amount" := ServiceLine."Inv. Discount Amount";
...Değiştirme kodu 1
..."Round Tax" := TaxArea."Round Tax";
TaxJurisdiction.GET("Tax Jurisdiction Code");
"Is Report-to Jurisdiction" := ("Tax Jurisdiction Code" = TaxJurisdiction."Report-to Jurisdiction");
END;
// Add the following line.
SetTaxBaseAmount(TempSalesTaxLine,ServiceLine."Line Amount" - ServiceLine."Inv. Discount Amount",ExchangeFactor,FALSE);
// End of the added line.
"Line Amount" := ServiceLine."Line Amount" / ExchangeFactor;
"Tax Liable" := ServiceLine."Tax Liable";
Quantity := ServiceLine."Quantity (Base)";
"Invoice Discount Amount" := ServiceLine."Inv. Discount Amount";
...Varolan kodu 2
...END ELSE BEGIN
"Line Amount" := "Line Amount" + (ServiceLine."Line Amount" / ExchangeFactor);
IF ServiceLine."Tax Liable" THEN
"Tax Liable" := ServiceLine."Tax Liable";
// Delete the following line.
"Tax Base Amount" :=
"Tax Base Amount" + ((ServiceLine."Line Amount" - ServiceLine."Inv. Discount Amount") / ExchangeFactor);
// End of the deleted line.
"Tax Amount" := 0;
Quantity := Quantity + ServiceLine."Quantity (Base)";
"Invoice Discount Amount" := "Invoice Discount Amount" + ServiceLine."Inv. Discount Amount";
MODIFY;
...Değiştirme kodu 2
...END ELSE BEGIN
"Line Amount" := "Line Amount" + (ServiceLine."Line Amount" / ExchangeFactor);
IF ServiceLine."Tax Liable" THEN
"Tax Liable" := ServiceLine."Tax Liable";
// Add the following line.
SetTaxBaseAmount(TempSalesTaxLine,ServiceLine."Line Amount" - ServiceLine."Inv. Discount Amount",ExchangeFactor,TRUE);
// End of the added line.
"Tax Amount" := 0;
Quantity := Quantity + ServiceLine."Quantity (Base)";
"Invoice Discount Amount" := "Invoice Discount Amount" + ServiceLine."Inv. Discount Amount";
MODIFY;
... -
Satış vergisi hesaplamasını kod (398) AddServInvoiceLines işlevinde kodu aşağıdaki gibi değiştirin:
Varolan kodu 1..."Is Report-to Jurisdiction" :=
("Tax Jurisdiction Code" = TaxJurisdiction."Report-to Jurisdiction");
END;
"Line Amount" := ServInvLine."Line Amount" / ExchangeFactor;
// Delete the following lines.
"Tax Base Amount" := ServInvLine."VAT Base Amount" / ExchangeFactor;
Quantity := ServInvLine.Quantity;
"Tax Liable" := ServInvLine."Tax Liable";
// End of the deleted line.
"Calculation Order" := TaxAreaLine."Calculation Order";
InsertRec := TRUE;
INSERT;
...Değiştirme kodu 1
..."Is Report-to Jurisdiction" :=
("Tax Jurisdiction Code" = TaxJurisdiction."Report-to Jurisdiction");
END;
"Line Amount" := ServInvLine."Line Amount" / ExchangeFactor;
// Add the following lines.
SetTaxBaseAmount(TempSalesTaxLine,ServInvLine."VAT Base Amount",ExchangeFactor,FALSE);
Quantity := ServInvLine.Quantity;
"Tax Liable" := ServInvLine."Tax Liable";
// End of the added lines.
"Calculation Order" := TaxAreaLine."Calculation Order";
InsertRec := TRUE;
INSERT;
...Varolan kodu 2
...InsertRec := TRUE;
INSERT;
END ELSE BEGIN
"Line Amount" := "Line Amount" + (ServInvLine."Line Amount" / ExchangeFactor);
// Delete the following line.
"Tax Base Amount" := "Tax Base Amount" + (ServInvLine."VAT Base Amount" / ExchangeFactor);
// End of the deleted line.
Quantity := Quantity + ServInvLine.Quantity;
IF ServInvLine."Tax Liable" THEN
"Tax Liable" := ServInvLine."Tax Liable";
InsertRec := FALSE;
...Değiştirme kodu 2
...InsertRec := TRUE;
INSERT;
END ELSE BEGIN
"Line Amount" := "Line Amount" + (ServInvLine."Line Amount" / ExchangeFactor);
// Add the following line.
SetTaxBaseAmount(TempSalesTaxLine,ServInvLine."VAT Base Amount",ExchangeFactor,TRUE);
// End of the added line.
Quantity := Quantity + ServInvLine.Quantity;
IF ServInvLine."Tax Liable" THEN
"Tax Liable" := ServInvLine."Tax Liable";
InsertRec := FALSE;
... -
Satış vergisi hesaplamasını kod (398) AddServCrMemoLines işlevinde kodu aşağıdaki gibi değiştirin:
Varolan kodu 1..."Is Report-to Jurisdiction" :=
("Tax Jurisdiction Code" = TaxJurisdiction."Report-to Jurisdiction");
END;
"Line Amount" := ServCrMemoLine."Line Amount" / ExchangeFactor;
// Delete the following line.
"Tax Base Amount" := ServCrMemoLine."VAT Base Amount" / ExchangeFactor;
// End of the deleted line.
Quantity := ServCrMemoLine.Quantity;
"Tax Liable" := ServCrMemoLine."Tax Liable";
"Calculation Order" := TaxAreaLine."Calculation Order";
...Değiştirme kodu 1
..."Is Report-to Jurisdiction" :=
("Tax Jurisdiction Code" = TaxJurisdiction."Report-to Jurisdiction");
END;
"Line Amount" := ServCrMemoLine."Line Amount" / ExchangeFactor;
// Add the following line.
SetTaxBaseAmount(TempSalesTaxLine,ServCrMemoLine."VAT Base Amount",ExchangeFactor,FALSE);
// End of the added line.
Quantity := ServCrMemoLine.Quantity;
"Tax Liable" := ServCrMemoLine."Tax Liable";
"Calculation Order" := TaxAreaLine."Calculation Order";
...Varolan kodu 2
...InsertRec := TRUE;
INSERT;
END ELSE BEGIN
"Line Amount" := "Line Amount" + (ServCrMemoLine."Line Amount" / ExchangeFactor);
// Delete the following line.
"Tax Base Amount" := "Tax Base Amount" + (ServCrMemoLine."VAT Base Amount" / ExchangeFactor);
// End of the deleted line.
Quantity := Quantity + ServCrMemoLine.Quantity;
IF ServCrMemoLine."Tax Liable" THEN
"Tax Liable" := ServCrMemoLine."Tax Liable";
InsertRec := FALSE;
...Değiştirme kodu 2
...InsertRec := TRUE;
INSERT;
END ELSE BEGIN
"Line Amount" := "Line Amount" + (ServCrMemoLine."Line Amount" / ExchangeFactor);
// Add the following line.
SetTaxBaseAmount(TempSalesTaxLine,ServCrMemoLine."VAT Base Amount",ExchangeFactor,TRUE);
// End of the added line.
Quantity := Quantity + ServCrMemoLine.Quantity;
IF ServCrMemoLine."Tax Liable" THEN
"Tax Liable" := ServCrMemoLine."Tax Liable";
InsertRec := FALSE;
... -
Bir işlev SetTaxBaseAmount satış vergisi hesaplamasını kod biriminde (398) aşağıdaki gibi ekleyin:
LOCAL PROCEDURE SetTaxBaseAmount@1020031(VAR SalesTaxAmountLine@1020001 : Record 10011;Value@1020000 : Decimal;ExchangeFactor@1020002 : Decimal;Increment@1020003 : Boolean); BEGIN
WITH SalesTaxAmountLine DO BEGIN
IF Increment THEN
"Tax Base Amount FCY" += Value
ELSE
"Tax Base Amount FCY" := Value;
"Tax Base Amount" := "Tax Base Amount FCY" / ExchangeFactor;
END;
END;
Önkoşullar
Bu düzeltmeyi uygulamak için aşağıdaki ürünlerden birine sahip olmalıdır:
-
Microsoft Dynamics NAV 2009 R2 Kuzey Amerika sürümü
-
Kuzey Amerika sürümü Microsoft Dynamics NAV 2009 Service Pack 1
Kaldırma bilgileri
Bu düzeltmeyi kaldıramazsınız.
Durum
Microsoft bu sorunun "Aşağıdakilere Uygulanır" bölümünde listelenen Microsoft ürünlerinde bulunduğunu onaylamıştır.
Not: Bu, doğrudan Microsoft destek kuruluşu bünyesinde oluşturulan bir "HIZLI YAYIN" makalesidir. Burada yer alan bilgiler, oluşan sorunlara yanıt olarak olduğu gibi sağlanmıştır. Makale hızla kullanıma sunulduğu için materyallerde yazım hataları olabilir ve materyaller bildirilmeksizin herhangi bir zamanda revize edilebilir. Diğer konular için bkz. Kullanım koşulları.
