Talep çalışma sayfasının bir satınalma siparişi veya el ile bir satınalma siparişi Microsoft Dynamics NAV uygulamasında oluşturduğunuzda oluşturmak için kullandığınızda, doğrudan sevkiyat ve özel sipariş satış siparişindeki tanımlanan bilgileri dikkate almaz

Düzeltme bilgileri

Artık Microsoft tarafından desteklenen bir düzeltme sağlanmaktadır. Ancak bunun yalnızca bu makalede anlatılan sorunu düzeltmesi amaçlanmıştır. Yalnızca bu özel sorunla karşılaşmış olan sistemlere uygulayın. Bu düzeltme ek sınama uygulanabilir. Bu nedenle, bu sorundan ciddi bir şekilde etkilenmiyorsanız, Microsoft Dynamics NAV 2009 sonraki hizmet paketini veya, bu düzeltmeyi içeren bir sonraki Microsoft Dynamics NAV sürümü için beklemek öneririz.

Not: Özel durumlarda, destek aramaları teknik destek uzmanı Microsoft Dynamics ve ilgili ürünlere yönelik iptal edilebilir çözeceğini giderleri belirleyen belirli bir güncelleştirmenin sorununuzu. Ek destek sorularına ve söz konusu güncelleştirme için geçerli olmayan sorunlara normal destek ücretleri uygulanır.

Kod değişiklikleri

Not: Her zaman, uygulamadan önce test kodu denetimli bir ortamda üretim bilgisayarlarınıza düzeltmeler giderir.
Bu sorunu gidermek için şu adımları izleyin:
Not: Kuzey Amerika sürümü W1 için farklı olduğu için kod birimi (333) eriştiğinizde okuyun. Her ikisi için başlatma ve durdurma her sürümün etiketlerle burada bulunmaktadır.

1. Satınalma Başlığı tablosundaki (38) kodu aşağıdaki gibi değiştirin:

   1. Aşağıdaki genel metin sabiti ekleyin:
      Text051@1091: TextConst ' trk = %1 satınalma siparişi %2 alanının %3 satış siparişi aynı olması gerekir.';

   2. Aşağıdaki genel değişkenleri ekleyin:

      • Adı: NameAddressDetails; Veri türü: Metin [512];

      • Adı: NameAddressDetails2; Veri türü: Metin [512];

   3. Aşağıdaki işlev ekleyin:
      CheckAndAddShipToAdd@46 (SalesHeader@1000: 36; kaydetme ShowError@1001: Boolean): Boole;
      
      VAR PurchLine2@1002: Kayıt 39;
      İşlev için aşağıdaki kodu ekleyin:

      IF ShowError THEN BEGIN  PurchLine2.RESET;
        PurchLine2.SETRANGE("Document Type","Document Type"::Order);
        PurchLine2.SETRANGE("Document No.","No.");
        IF NOT PurchLine2.ISEMPTY THEN BEGIN
          IF "Ship-to Name" <>SalesHeader."Ship-to Name" THEN
            ERROR(Text051,FIELDCAPTION("Ship-to Name"),"No.",SalesHeader."No.");
          IF "Ship-to Name 2" <>SalesHeader."Ship-to Name 2" THEN
            ERROR(Text051,FIELDCAPTION("Ship-to Name 2"),"No.",SalesHeader."No.");
          IF ("Ship-to Address" <>SalesHeader."Ship-to Address") THEN
            ERROR(Text051,FIELDCAPTION("Ship-to Address"),"No.",SalesHeader."No.");
          IF ("Ship-to Address 2" <> SalesHeader."Ship-to Address 2") THEN
            ERROR(Text051,FIELDCAPTION("Ship-to Address 2"),"No.",SalesHeader."No.");
          IF ("Ship-to Post Code" <>SalesHeader."Ship-to Post Code") THEN
            ERROR(Text051,FIELDCAPTION("Ship-to Post Code"),"No.",SalesHeader."No.");
          IF ("Ship-to City" <>SalesHeader."Ship-to City") THEN
            ERROR(Text051,FIELDCAPTION("Ship-to City"),"No.",SalesHeader."No.");
          IF ("Ship-to Contact" <>SalesHeader."Ship-to Contact") THEN
            ERROR(Text051,FIELDCAPTION("Ship-to Contact"),"No.",SalesHeader."No.");
        END ELSE BEGIN
          // no purchase line exists
          "Ship-to Name" := SalesHeader."Ship-to Name";
          "Ship-to Name 2" := SalesHeader."Ship-to Name 2";
          "Ship-to Address" := SalesHeader."Ship-to Address";
          "Ship-to Address 2" := SalesHeader."Ship-to Address 2";
          "Ship-to Post Code" := SalesHeader."Ship-to Post Code";
          "Ship-to City" := SalesHeader."Ship-to City";
          "Ship-to Contact" := SalesHeader."Ship-to Contact";
        END;
      END ELSE BEGIN
        NameAddressDetails :=
          SalesHeader."Ship-to Name" + SalesHeader."Ship-to Name 2" +
          SalesHeader."Ship-to Address" + SalesHeader."Ship-to Address 2" +
          SalesHeader."Ship-to Post Code" + SalesHeader."Ship-to City" +
          SalesHeader."Ship-to Contact";
        IF NameAddressDetails2 = '' THEN
          NameAddressDetails2 := NameAddressDetails;
        EXIT(NameAddressDetails2 = NameAddressDetails);
      END;
      
      

   4. Aşağıdaki işlev ekleyin:
      DropShptSplOrderExists@48 (SalesHeader@1000: 36 kayıt): Boole;
      
      VAR SalesLine2@1001: Kayıt 37;
      
      İşlev için aşağıdaki kodu ekleyin:

      // returns TRUE if sales is either Drop Shipment of Special OrderSalesLine2.RESET;
      SalesLine2.SETRANGE("Document Type",SalesLine2."Document Type"::Order);
      SalesLine2.SETRANGE("Document No.",SalesHeader."No.");
      SalesLine2.SETRANGE("Drop Shipment",TRUE);
      IF NOT SalesLine2.ISEMPTY THEN
        EXIT(TRUE);
      
      SalesLine2.SETRANGE("Drop Shipment");
      SalesLine2.SETRANGE("Special Order",TRUE);
      EXIT(NOT SalesLine2.ISEMPTY);
      
      

2. Satış Siparişlerini Getir raporu (698) InsertReqWkshLine işlevinde kodu aşağıdaki gibi değiştirin:
   Varolan kodu

   ...    Quantity,
       ROUND(SalesLine."Outstanding Quantity" * SalesLine."Qty. per Unit of Measure" / "Qty. per Unit of Measure",0.00001));
     "Sales Order No." := SalesLine."Document No.";
     "Sales Order Line No." := SalesLine."Line No.";
     "Sell-to Customer No." := SalesLine."Sell-to Customer No.";
     SalesHeader.GET(1,SalesLine."Document No.");
     IF SpecOrder <>1 THEN
       "Ship-to Code" := SalesHeader."Ship-to Code";
     "Item Category Code" := SalesLine."Item Category Code";
     Nonstock := SalesLine.Nonstock;  
   ...
   

   Kod değiştirme

   ...        Quantity,
       ROUND(SalesLine."Outstanding Quantity" * SalesLine."Qty. per Unit of Measure" / "Qty. per Unit of Measure",0.00001));
     "Sales Order No." := SalesLine."Document No.";
     "Sales Order Line No." := SalesLine."Line No.";
     "Sell-to Customer No." := SalesLine."Sell-to Customer No.";
   
   // Add the following lines.
     Description := SalesLine.Description;
     "Description 2" := SalesLine."Description 2";
   // End of the added lines.
   
     SalesHeader.GET(1,SalesLine."Document No.");
     IF SpecOrder <>1 THEN
       "Ship-to Code" := SalesHeader."Ship-to Code";
     "Item Category Code" := SalesLine."Item Category Code";
     Nonstock := SalesLine.Nonstock;  
   ...
   

3. Kod işlevi kodunda değiştirmek Satınalma-bırak sevk almak (76) kod aşağıdaki gibi:
   Varolan kodu

   ...      IF RECORDLEVELLOCKING THEN
       LOCKTABLE;
     SalesHeader.TESTFIELD("Document Type",SalesHeader."Document Type"::Order);
     TESTFIELD("Sell-to Customer No.",SalesHeader."Sell-to Customer No.");
     TESTFIELD("Ship-to Code",SalesHeader."Ship-to Code");
   
     PurchLine.LOCKTABLE;
     IF NOT RECORDLEVELLOCKING THEN
       LOCKTABLE(TRUE,TRUE); // Only version check
     SalesLine.LOCKTABLE;
   ...
         PurchLine."Document Type" := PurchLine."Document Type"::Order;
         PurchLine."Document No." := "No.";
         PurchLine."Line No." := NextLineNo;
         CopyDocMgt.TransfldsFromSalesToPurchLine(SalesLine,PurchLine);
         PurchLine.Description := SalesLine.Description;
         PurchLine."Sales Order No." := SalesLine."Document No.";
         PurchLine."Sales Order Line No." := SalesLine."Line No.";
         PurchLine."Drop Shipment" := TRUE;
         EVALUATE(PurchLine."Inbound Whse. Handling Time",'<0D>');
         PurchLine.VALIDATE("Inbound Whse. Handling Time");    
   ...
   

   Kod değiştirme

   ...   IF RECORDLEVELLOCKING THEN
       LOCKTABLE;
     SalesHeader.TESTFIELD("Document Type",SalesHeader."Document Type"::Order);
     TESTFIELD("Sell-to Customer No.",SalesHeader."Sell-to Customer No.");
     TESTFIELD("Ship-to Code",SalesHeader."Ship-to Code");
   
   // Add the following lines.
     IF DropShptSplOrderExists(SalesHeader) THEN
       CheckAndAddShipToAdd(SalesHeader,TRUE);
   // End of the added lines.
   
     PurchLine.LOCKTABLE;
     IF NOT RECORDLEVELLOCKING THEN
       LOCKTABLE(TRUE,TRUE); // Only version check
     SalesLine.LOCKTABLE;
   ...
         PurchLine."Document Type" := PurchLine."Document Type"::Order;
         PurchLine."Document No." := "No.";
         PurchLine."Line No." := NextLineNo;
         CopyDocMgt.TransfldsFromSalesToPurchLine(SalesLine,PurchLine);
         PurchLine.Description := SalesLine.Description;
   
   // Add the following line.
         PurchLine."Description 2" := SalesLine."Description 2";
   // End of the added line.
   
         PurchLine."Sales Order No." := SalesLine."Document No.";
         PurchLine."Sales Order Line No." := SalesLine."Line No.";
         PurchLine."Drop Shipment" := TRUE;
         EVALUATE(PurchLine."Inbound Whse. Handling Time",'<0D>');
         PurchLine.VALIDATE("Inbound Whse. Handling Time");          
   ...
   

4. ReqJnlManagement kod (330) GetDescriptionAndRcptName işlevinde kodu aşağıdaki gibi değiştirin:
   Varolan kodu

   ...       ReqLine.Type::"G/L Account":
           IF GLAcc.GET(ReqLine."No.") THEN
             Description := GLAcc.Name
           ELSE
             Description := '';
   
   // Delete the following lines.
         ReqLine.Type::Item:
           IF Item.GET(ReqLine."No.") THEN
             Description := Item.Description
           ELSE
             Description := '';
   // End of the deleted lines.
   
       END;
     END;
   
   IF ReqLine."Vendor No." = '' THEN
     BuyFromVendorName := ''        
   ...
   

   Kod değiştirme

   ...         ReqLine.Type::"G/L Account":
           IF GLAcc.GET(ReqLine."No.") THEN
             Description := GLAcc.Name
           ELSE
             Description := '';
       END;
     END;
   
   IF ReqLine."Vendor No." = '' THEN
     BuyFromVendorName := ''    
   ...
   

5. Not Kod birimi (333), dünya çapında sürüm vs Kuzey Amerika sürümünde farklı kod vardır. Doğru bölüm, yüklemek için kullanın.
   
   Kuzey Amerika sürümü BAŞLAMADAN kod (333) kodunda değiştirmek Talep Çlş.-Sipariş Oluştur aşağıdaki gibi:

   1. Aşağıdaki genel değişkeni ekleyin:

      • Adı: DropShptSpecialOrderExists;

      • Veri türü: Boolean;

   2. InsertPurchOrderLineişlevinde aşağıdaki yerel değişkenleri ekleyin:

      • Adı: SalesHeader; Veri türü: Kayıt (36);

      • Adı: DropShptSplOrderDiffAddress; Veri türü: Boolean;

      • Adı: CreateNewRecord; Veri türü: Boolean;

   3. InsertPurchOrderLineişlevinde kodu aşağıdaki gibi değiştirin:
      Varolan kodu

      ...// Delete the following lines.
      WITH ReqLine2 DO BEGIN
        IF ("No." = '') OR ("Vendor No." = '') OR (Quantity = 0) THEN
          EXIT;
        IF NOT PurchasingCode.GET("Purchasing Code") THEN
          PurchasingCode."Special Order" := FALSE;
        IF (PurchasingCode."Special Order" AND
            (PurchSetup."Combine Special Orders Default" =
             PurchSetup."Combine Special Orders Default"::"Always Combine") AND
            ((PurchOrderHeader."Buy-from Vendor No." <>"Vendor No.") OR
             (PurchOrderHeader."Location Code" <> "Location Code") OR
             (PurchOrderHeader."Currency Code" <>"Currency Code") OR
             (PrevPurchCode <>"Purchasing Code"))) OR
           (NOT PurchasingCode."Special Order" AND
             ((PurchOrderHeader."Buy-from Vendor No." <>"Vendor No.") OR
             (PurchOrderHeader."Location Code" <>"Location Code") OR
             (PurchOrderHeader."Sell-to Customer No." <>"Sell-to Customer No.") OR
             (PrevShipToCode <>"Ship-to Code") OR
             (PurchOrderHeader."Order Address Code" <> "Order Address Code") OR
             (PurchOrderHeader."Currency Code" <> "Currency Code") OR
             (PrevPurchCode <>"Purchasing Code")))
        THEN BEGIN
          InsertHeader(ReqLine2);
          LineCount := 0;
          NextLineNo := 0;
          PrevPurchCode := "Purchasing Code";
          PrevShipToCode := "Ship-to Code";
        END;
        IF (PurchasingCode."Special Order") AND
            (PurchSetup."Combine Special Orders Default" =
            PurchSetup."Combine Special Orders Default"::"Never Combine") AND
            ((PurchOrderHeader."Buy-from Vendor No." <>"Vendor No.") OR
             (PurchOrderHeader."Location Code" <> "Location Code") OR
             (PurchOrderHeader."Currency Code" <>"Currency Code") OR
             (PrevPurchCode <> "Purchasing Code")) THEN BEGIN
          InsertHeader(ReqLine2);
        END;
      // End of the deleted lines.
      
        LineCount := LineCount + 1;
        IF NOT PlanningResiliency THEN
          Window.UPDATE(4,LineCount);       
      ...
      

      Kod değiştirme

      ...// Add the following lines.
      WITH ReqLine2 DO BEGIN
        IF ("No." = '') OR ("Vendor No." = '') OR (Quantity = 0) THEN
          EXIT;
        DropShptSpecialOrderExists := FALSE;
        IF SalesHeader.GET(SalesHeader."Document Type"::Order,"Sales Order No.") THEN BEGIN
          DropShptSpecialOrderExists := PurchOrderHeader.DropShptSplOrderExists(SalesHeader);
          IF DropShptSpecialOrderExists THEN
            DropShptSplOrderDiffAddress :=
              NOT PurchOrderHeader.CheckAndAddShipToAdd(SalesHeader,FALSE);
        END;
        IF NOT PurchasingCode.GET("Purchasing Code") THEN
          PurchasingCode."Special Order" := FALSE;
      
        CreateNewRecord :=
          (PurchOrderHeader."Buy-from Vendor No." <>"Vendor No.") OR
          (PurchOrderHeader."Location Code" <> "Location Code") OR
          (PurchOrderHeader."Currency Code" <> "Currency Code") OR
          (PrevPurchCode <>"Purchasing Code") OR
          DropShptSplOrderDiffAddress;
      
        IF PurchasingCode."Special Order" AND CreateNewRecord THEN BEGIN
          InsertHeader(ReqLine2);
          IF PurchSetup."Combine Special Orders Default" =
             PurchSetup."Combine Special Orders Default"::"Always Combine"
          THEN BEGIN
            LineCount := 0;
            NextLineNo := 0;
            PrevPurchCode := "Purchasing Code";
            PrevShipToCode := "Ship-to Code";
          END;
        END;
        IF NOT PurchasingCode."Special Order" AND
           (CreateNewRecord OR
           (PurchOrderHeader."Sell-to Customer No." <>"Sell-to Customer No.") OR
           (PrevShipToCode <>"Ship-to Code") OR
           (PurchOrderHeader."Order Address Code" <>"Order Address Code"))
        THEN BEGIN
          InsertHeader(ReqLine2);
          LineCount := 0;
          NextLineNo := 0;
          PrevPurchCode := "Purchasing Code";
          PrevShipToCode := "Ship-to Code";
        END;
      // End of the added lines.
      
        LineCount := LineCount + 1;
        IF NOT PlanningResiliency THEN
          Window.UPDATE(4,LineCount);       
      ...
      

   4. InsertHeader işlevinde kodu aşağıdaki gibi değiştirin:
      Aşağıdaki yerel değişken ekleyin:
      

      • Adı: SalesHeader;

      • Veri türü: Kayıt (36);

      Varolan kodu

      ...   WITH ReqLine2 DO BEGIN
        OrderCounter := OrderCounter + 1;
        IF NOT PlanningResiliency THEN
          Window.UPDATE(3,OrderCounter);
      
        PurchSetup.GET;
        PurchSetup.TESTFIELD("Order Nos.");
      
      // Delete the following line.
        CLEAR(PurchOrderHeader);
      // End of the deleted line.
      
        PurchOrderHeader.INIT;
        PurchOrderHeader."Document Type" := PurchOrderHeader."Document Type"::Order;
        PurchOrderHeader."No." := '';
      ...
            PurchOrderHeader.VALIDATE("Location Code",ReqLine2."Location Code");
        END ELSE BEGIN
          PurchOrderHeader.VALIDATE("Location Code",ReqLine2."Location Code");
          PurchOrderHeader.SetShipToForSpecOrder;
        END;
      
        PurchOrderHeader.MODIFY;
        COMMIT;
        IF RECORDLEVELLOCKING THEN
          LOCKTABLE;
        PurchOrderHeader.MARK(TRUE);
      END;      
      ...
      

      Kod değiştirme

      ...WITH ReqLine2 DO BEGIN
        OrderCounter := OrderCounter + 1;
        IF NOT PlanningResiliency THEN
          Window.UPDATE(3,OrderCounter);
      
        PurchSetup.GET;
        PurchSetup.TESTFIELD("Order Nos.");
        PurchOrderHeader.INIT;
        PurchOrderHeader."Document Type" := PurchOrderHeader."Document Type"::Order;
        PurchOrderHeader."No." := '';
      ...
            PurchOrderHeader.VALIDATE("Location Code",ReqLine2."Location Code");
        END ELSE BEGIN
          PurchOrderHeader.VALIDATE("Location Code",ReqLine2."Location Code");
          PurchOrderHeader.SetShipToForSpecOrder;
        END;
      
      // Add the following lines.
        IF DropShptSpecialOrderExists THEN BEGIN
          SalesHeader.GET(SalesHeader."Document Type"::Order,"Sales Order No.");
          PurchOrderHeader."Ship-to Name" := SalesHeader."Ship-to Name";
          PurchOrderHeader."Ship-to Name 2" := SalesHeader."Ship-to Name 2";
          PurchOrderHeader."Ship-to Address" := SalesHeader."Ship-to Address";
          PurchOrderHeader."Ship-to Address 2" := SalesHeader."Ship-to Address 2";
          PurchOrderHeader."Ship-to Post Code" := SalesHeader."Ship-to Post Code";
          PurchOrderHeader."Ship-to City" := SalesHeader."Ship-to City";
          PurchOrderHeader."Ship-to Contact" := SalesHeader."Ship-to Contact";
        END;
      // End of the added lines.
      
        PurchOrderHeader.MODIFY;
        COMMIT;
        IF RECORDLEVELLOCKING THEN
          LOCKTABLE;
        PurchOrderHeader.MARK(TRUE);
      END;       
      ...
      

   W1 sürüm başlamak kod (333) kodunda değiştirmek Talep Çlş.-siparişe aşağıdaki gibi:

   1. Aşağıdaki genel değişkeni ekleyin:

      • Adı: DropShptSpecialOrderExists;

      • Veri türü: Boolean;

   2. InsertPurchOrderLineişlevinde aşağıdaki yerel değişkenleri ekleyin:

      • Adı: SalesHeader; Veri türü: Kayıt (36);

      • Adı: DropShptSplOrderDiffAddress; Veri türü: Boolean;

   3. InsertPurchOrderLineişlevinde kodu aşağıdaki gibi değiştirin:
      Varolan kodu

      ...   WITH ReqLine2 DO BEGIN
        IF ("No." = '') OR ("Vendor No." = '') OR (Quantity = 0) THEN
          EXIT;
      
        IF (PurchOrderHeader."Buy-from Vendor No." <>"Vendor No.") OR
           (PurchOrderHeader."Sell-to Customer No."<> "Sell-to Customer No.") OR
           (PrevShipToCode <> "Ship-to Code") OR
           (PurchOrderHeader."Order Address Code" <>"Order Address Code") OR
           (PurchOrderHeader."Currency Code" <>"Currency Code") OR
      
      // Delete the following line.
           (PrevPurchCode <>"Purchasing Code")
      // End of the deleted line.
      
        THEN BEGIN
          InsertHeader(ReqLine2);
          LineCount := 0;
          NextLineNo := 0;
          PrevPurchCode := "Purchasing Code";
          PrevShipToCode := "Ship-to Code";
        END; 
      ...
      

      Kod değiştirme

      ...  WITH ReqLine2 DO BEGIN
        IF ("No." = '') OR ("Vendor No." = '') OR (Quantity = 0) THEN
          EXIT;
      // Add the following lines.
        DropShptSpecialOrderExists := FALSE;
        IF SalesHeader.GET(SalesHeader."Document Type"::Order,"Sales Order No.") THEN BEGIN
          DropShptSpecialOrderExists := PurchOrderHeader.DropShptSplOrderExists(SalesHeader);
          IF DropShptSpecialOrderExists THEN
            DropShptSplOrderDiffAddress :=
              NOT PurchOrderHeader.CheckAndAddShipToAdd(SalesHeader,FALSE);
        END;
      // End of the added lines.  
       IF (PurchOrderHeader."Buy-from Vendor No." <>"Vendor No.") OR
           (PurchOrderHeader."Sell-to Customer No."<> "Sell-to Customer No.") OR
           (PrevShipToCode <> "Ship-to Code") OR
           (PurchOrderHeader."Order Address Code" <>"Order Address Code") OR
           (PurchOrderHeader."Currency Code" <>"Currency Code") OR
      
      // Add the following lines.
           (PrevPurchCode <> "Purchasing Code") OR
           (DropShptSplOrderDiffAddress)
      // End of the added lines.
      
        THEN BEGIN
          InsertHeader(ReqLine2);
          LineCount := 0;
          NextLineNo := 0;
          PrevPurchCode := "Purchasing Code";
          PrevShipToCode := "Ship-to Code";
        END; 
      ...
      

   4. InsertHeader işlevinde kodu aşağıdaki gibi değiştirin:
      Aşağıdaki yerel değişken ekleyin:
      

      • Adı: SalesHeader;

      • Veri türü: Kayıt (36);

      Varolan kodu

      ...    END ELSE BEGIN
          PurchOrderHeader.VALIDATE("Location Code",ReqLine2."Location Code");
          PurchOrderHeader.SetShipToForSpecOrder;
        END;
      
        PurchOrderHeader.MODIFY;
        COMMIT;
        IF RECORDLEVELLOCKING THEN
          LOCKTABLE;
        PurchOrderHeader.MARK(TRUE);
      END;      
      ...
      

      Kod değiştirme

      ... END ELSE BEGIN
          PurchOrderHeader.VALIDATE("Location Code",ReqLine2."Location Code");
          PurchOrderHeader.SetShipToForSpecOrder;
        END;
      // Add the following lines.
        IF DropShptSpecialOrderExists THEN BEGIN
          IF SalesHeader.GET(SalesHeader."Document Type"::Order,"Sales Order No.") THEN BEGIN
          PurchOrderHeader."Ship-to Name" := SalesHeader."Ship-to Name";
          PurchOrderHeader."Ship-to Name 2" := SalesHeader."Ship-to Name 2";
          PurchOrderHeader."Ship-to Address" := SalesHeader."Ship-to Address";
          PurchOrderHeader."Ship-to Address 2" := SalesHeader."Ship-to Address 2";
          PurchOrderHeader."Ship-to Post Code" := SalesHeader."Ship-to Post Code";
          PurchOrderHeader."Ship-to City" := SalesHeader."Ship-to City";
          PurchOrderHeader."Ship-to Contact" := SalesHeader."Ship-to Contact";
        END;
      // End of the added lines.
      
        PurchOrderHeader.MODIFY;
        COMMIT;
        IF RECORDLEVELLOCKING THEN
          LOCKTABLE;
        PurchOrderHeader.MARK(TRUE);
      END;
      ...
      

6. Dist. tümleştirme kod (5702) EnterPurchaseItemCrossRef işlevinde kodu aşağıdaki gibi değiştirin:
   Varolan kodu

   ...   IF Found THEN BEGIN
         "Cross-Reference No." := ItemCrossReference."Cross-Reference No.";
         "Unit of Measure (Cross Ref.)" := ItemCrossReference."Unit of Measure";
         "Cross-Reference Type" := ItemCrossReference."Cross-Reference Type";
   
   // Delete the following lines.
         IF ItemCrossReference.Description <>'' THEN BEGIN
           Description := ItemCrossReference.Description;
           "Description 2" := '';
         END;
       END ELSE BEGIN
         "Cross-Reference No." := '';
         "Cross-Reference Type" := "Cross-Reference Type"::" ";
         "Cross-Reference Type No." := '';
         IF "Variant Code" <>'' THEN BEGIN
           ItemVariant.GET("No.","Variant Code");
           Description := ItemVariant.Description;
           "Description 2" := ItemVariant."Description 2";
         END ELSE BEGIN
           Item.GET("No.");
           Description := Item.Description;
           "Description 2" := Item."Description 2";
         END;
   // End of the deleted lines.
   
         GetItemTranslation;
       END;
     END;         
   ...
   

   Kod değiştirme

   ...       IF Found THEN BEGIN
         "Cross-Reference No." := ItemCrossReference."Cross-Reference No.";
         "Unit of Measure (Cross Ref.)" := ItemCrossReference."Unit of Measure";
         "Cross-Reference Type" := ItemCrossReference."Cross-Reference Type";
   
   // Add the following lines.
         "Cross-Reference Type No." := ItemCrossReference."Cross-Reference Type No.";
       END ELSE BEGIN
         "Cross-Reference No." := '';
         "Cross-Reference Type" := "Cross-Reference Type"::" ";
         "Cross-Reference Type No." := '';
   // End of the added lines.
   
         GetItemTranslation;
       END;
     END;    
   ...
   

7. Dist. tümleştirme kod (5702) GetSpecialOrders işlevinde kodu aşağıdaki gibi değiştirin:
   Varolan kodu

   ...    IF RECORDLEVELLOCKING THEN
       LOCKTABLE;
     SalesHeader.TESTFIELD("Document Type",SalesHeader."Document Type"::Order);
     TESTFIELD("Sell-to Customer No.",SalesHeader."Sell-to Customer No.");
     TESTFIELD("Ship-to Code",SalesHeader."Ship-to Code");
   
   // Delete the following line.
     PurchHeader.SetShipToForSpecOrder;
   // End of the deleted line.
   
     PurchLine.LOCKTABLE;
     IF NOT RECORDLEVELLOCKING THEN
       LOCKTABLE(TRUE,TRUE); // Only version check
     SalesLine.LOCKTABLE;       
   ...
   

   Kod değiştirme

   ...    IF RECORDLEVELLOCKING THEN
       LOCKTABLE;
     SalesHeader.TESTFIELD("Document Type",SalesHeader."Document Type"::Order);
     TESTFIELD("Sell-to Customer No.",SalesHeader."Sell-to Customer No.");
     TESTFIELD("Ship-to Code",SalesHeader."Ship-to Code");
   // Add the following lines.
     IF DropShptSplOrderExists(SalesHeader) THEN
       CheckAndAddShipToAdd(SalesHeader,TRUE);
   // End of the added lines.
   
     PurchLine.LOCKTABLE;
     IF NOT RECORDLEVELLOCKING THEN
       LOCKTABLE(TRUE,TRUE); // Only version check
     SalesLine.LOCKTABLE;    
   ...
   

8. Kopya belge yönetimi kod (6620) TransfldsFromSalesToPurchLine işlevinde kodu aşağıdaki gibi değiştirin:
   Varolan kodu

   ...  "Expected Receipt Date" := FromSalesLine."Shipment Date";
     "Bin Code" := FromSalesLine."Bin Code";
     VALIDATE(Quantity,FromSalesLine."Outstanding Quantity");
     VALIDATE("Return Reason Code",FromSalesLine."Return Reason Code");
     VALIDATE("Direct Unit Cost");
   END;     
   ...
   

   Kod değiştirme

   ...  "Expected Receipt Date" := FromSalesLine."Shipment Date";
     "Bin Code" := FromSalesLine."Bin Code";
     VALIDATE(Quantity,FromSalesLine."Outstanding Quantity");
     VALIDATE("Return Reason Code",FromSalesLine."Return Reason Code");
     VALIDATE("Direct Unit Cost");
   // Add the following lines.
     Description := FromSalesLine.Description;
     "Description 2" := FromSalesLine."Description 2";
   // End of the added lines.
   END;       
   ...