Bu makale Microsoft Dynamics NAV için İspanyolca (es) bölgesi için geçerlidir.
Belirtiler
Seçtiğinizde gösterisi AutoInvoices / Autocr faturasını seçeneği için Satış Fatura defteri raporu Microsoft Dynamics NAV 2013 rapor İspanyolca sürümünde AutoInvoices ve AutoCreditMemos için yanlış Seri No ve Toplam değerleri görüntüler.
Çözüm
Düzeltme bilgileri
Artık Microsoft tarafından desteklenen bir düzeltme sağlanmaktadır. Ancak bunun yalnızca bu makalede anlatılan sorunu düzeltmesi amaçlanmıştır. Yalnızca bu özel sorunla karşılaşmış olan sistemlere uygulayın. Bu düzeltme ek sınama uygulanabilir. Bu nedenle, bu sorundan ciddi bir şekilde etkilenmiyorsanız, Microsoft Dynamics NAV 2013 sonraki hizmet paketini veya, bu düzeltmeyi içeren bir sonraki Microsoft Dynamics NAV sürümü için beklemek öneririz.
Not: Özel durumlarda, destek aramaları teknik destek uzmanı Microsoft Dynamics ve ilgili ürünlere yönelik iptal edilebilir çözeceğini giderleri belirleyen belirli bir güncelleştirmenin sorununuzu. Ek destek sorularına ve söz konusu güncelleştirme için geçerli olmayan sorunlara normal destek ücretleri uygulanır.
Yükleme bilgileri
Microsoft, programlama örneklerini yalnızca gösterim amacıyla zımni veya açık garanti olmadan sağlar. Bu, satılabilirlik veya belirli bir amaca uygunluk açısından zımni garantileri içerir ancak bunlarla sınırlı değildir. Bu makale, gösterilen programlama dilini, yordamları oluşturmak ve yordamlardan hata ayıklamak için kullanılan araçları bildiğinizi varsayar. Microsoft destek mühendisleri belirli bir yordamın işlevselliğinin açıklanmasına yardımcı olabilir. Ancak, işlevsellik sağlamak veya yordamlar, belirli gereksinimlerinizi karşılayacak şekilde geliştirmek amacıyla bu örnekleri değiştirmezler.
Not: Bu düzeltmeyi yüklemeden önce tüm Microsoft Dynamics NAV istemci kullanıcıların sistem kaydedildiğini doğrulayın. Bu, Microsoft Dynamics NAV uygulama sunucusu (NAS) hizmetleri içerir. Bu düzeltmeyi uyguladığınızda yalnızca istemci kullanıcının oturum açmış olması gerekir.
Bu düzeltmeyi uygulamak için bir geliştirici lisansı olması gerekir.
Kullanıcı hesabının Windows oturumu açma penceresini veya veritabanı oturumu açma penceresi "Süper" rol kimliği atanması öneririz Kullanıcı hesabı "Süper" rol Kimliği atanamaz, kullanıcı hesabı aşağıdaki izinlere sahip olduğunu doğrulamanız gerekir:
-
Nesnenin, değiştirme değişiklik yapma izni.
-
Sistem nesne kimliği 9015 ve Sistem nesnesi kimliği 5210 nesne için Execute izni
nesne.
Not: Veri onarım gerçekleştirmek zorunda sürece veri depoları haklarına sahip olmanız gerekmez.
Kod değişiklikleri
Not: Her zaman, uygulamadan önce test kodu denetimli bir ortamda üretim bilgisayarlarınıza düzeltmeler giderir.
Bu sorunu gidermek için şu adımları izleyin:
-
Satış Fatura defteri raporu (10704) Özellikleri'nde kodu aşağıdaki gibi değiştirin:
Varolan kodu...SourceExpr=VATBuffer2.Base + VATBuffer2.Amount }
{ 1170000028;3;Column;Integer2__Number ;
SourceExpr=Number }
// Delete the following lines.
{ 113 ;3 ;Column ;TotalCaption_Control113;
SourceExpr=TotalCaption_Control113Lbl }
// End of the deleted lines.
}
REQUESTPAGE
{
PROPERTIES
{
...Kod değiştirme
...SourceExpr=VATBuffer2.Base + VATBuffer2.Amount }
{ 1170000028;3;Column;Integer2__Number ;
SourceExpr=Number }
}
REQUESTPAGE
{
PROPERTIES
{
... -
Satış Fatura defteri raporu (10704) Global değişkenler kodunda şu şekilde değiştirin:
Varolan kodu 1...ContinuedCaption_Control129Lbl@6504 : TextConst 'ENU=Continued;ESP=Continuaci¢n';
No_SerieCaptionLbl@1947 : TextConst 'ENU=No.Serie;ESP=Nos. serie';
TotalCaption_Control99Lbl@8494 : TextConst 'ENU=Total;ESP=Total';
No_SerieCaption_Control100Lbl@2401 : TextConst 'ENU=No.Serie;ESP=Nos. serie';
ContinuedCaption_Control117Lbl@4855 : TextConst 'ENU=Continued;ESP=Continuaci¢n';
// Delete the following line.
TotalCaption_Control113Lbl@4508 : TextConst 'ENU=Total;ESP=Total';
// End of the deleted line.
BEGIN
{
<changelog>
<add id="ES0001" dev="VGARCA" date="2004-08-27" area="AUTOINV" request="ES-START-40"
...Değiştirme kodu 1
...ContinuedCaption_Control129Lbl@6504 : TextConst 'ENU=Continued;ESP=Continuaci¢n';
No_SerieCaptionLbl@1947 : TextConst 'ENU=No.Serie;ESP=Nos. serie';
TotalCaption_Control99Lbl@8494 : TextConst 'ENU=Total;ESP=Total';
No_SerieCaption_Control100Lbl@2401 : TextConst 'ENU=No.Serie;ESP=Nos. serie';
ContinuedCaption_Control117Lbl@4855 : TextConst 'ENU=Continued;ESP=Continuaci¢n';
BEGIN
{
<changelog>
<add id="ES0001" dev="VGARCA" date="2004-08-27" area="AUTOINV" request="ES-START-40"
...Varolan kodu 2
...<DataField>VATBuffer2_Base_VATBuffer2_Amount_Control116Format</DataField>
</Field>
<Field Name="Integer2__Number">
<DataField>Integer2__Number</DataField>
</Field>
// Delete the following lines.
<Field Name="TotalCaption_Control113">
<DataField>TotalCaption_Control113</DataField>
</Field>
// End of the deleted lines.
</Fields>
<rd:DataSetInfo>
<rd:DataSetName>DataSet</rd:DataSetName>
<rd:SchemaPath>Report.xsd</rd:SchemaPath>
<rd:TableName>Result</rd:TableName>
...Değiştirme kodu 2
...<DataField>VATBuffer2_Base_VATBuffer2_Amount_Control116Format</DataField>
</Field>
<Field Name="Integer2__Number">
<DataField>Integer2__Number</DataField>
</Field>
</Fields>
<rd:DataSetInfo>
<rd:DataSetName>DataSet</rd:DataSetName>
<rd:SchemaPath>Report.xsd</rd:SchemaPath>
<rd:TableName>Result</rd:TableName>
...Varolan kodu 3
...<TextRun>
<Value>=SUM(Fields!VATBuffer2_Base.Value)</Value>
<Style>
<FontSize>7pt</FontSize>
<FontWeight>Bold</FontWeight>
// Delete the following line.
<Format>=Last(Fields!VATBuffer2_BaseFormat.Value)</Format>
// End of the deleted line.
</Style>
</TextRun>
</TextRuns>
</Paragraph>
</Paragraphs>
...Değiştirme kodu 3
...<TextRun>
<Value>=SUM(Fields!VATBuffer2_Base.Value)</Value>
<Style>
<FontSize>7pt</FontSize>
<FontWeight>Bold</FontWeight>
// Add the following line.
<Format>N</Format>
// End of the added line.
</Style>
</TextRun>
</TextRuns>
</Paragraph>
</Paragraphs>
...Varolan kodu 4
...<KeepTogether>true</KeepTogether>
<Paragraphs>
<Paragraph>
<TextRuns>
<TextRun>
// Delete the following line.
<Value>=Fields!TotalCaption_Control113.Value</Value>
// End of the deleted line.
<Style>
<FontSize>7pt</FontSize>
</Style>
</TextRun>
</TextRuns>
...Değiştirme kodu 4
...<KeepTogether>true</KeepTogether>
<Paragraphs>
<Paragraph>
<TextRuns>
<TextRun>
// Add the following line.
<Value>=Fields!TotalCaption.Value</Value>
// End of the added line.
<Style>
<FontSize>7pt</FontSize>
</Style>
</TextRun>
</TextRuns>
...Varolan kodu 5
...<TextRuns>
<TextRun>
<Value>=SUM(Fields!VATBuffer2_Base_Control86.Value)</Value>
<Style>
<FontSize>7pt</FontSize>
// Delete the following line.
<Format>=Fields!VATBuffer2_Base_Control86Format.Value</Format>
// End of the deleted line.
</Style>
</TextRun>
</TextRuns>
</Paragraph>
</Paragraphs>
...Değiştirme kodu 5
...<TextRuns>
<TextRun>
<Value>=SUM(Fields!VATBuffer2_Base_Control86.Value)</Value>
<Style>
<FontSize>7pt</FontSize>
// Add the following lines.
<FontWeight>Bold</FontWeight>
<Format>N</Format>
// End of the added lines.
</Style>
</TextRun>
</TextRuns>
</Paragraph>
</Paragraphs>
...Varolan kodu 6
...<TextRuns>
<TextRun>
<Value>=Code.BlankZero(SUM(Fields!VATBuffer2_Amount_Control83.Value))</Value>
<Style>
<FontSize>7pt</FontSize>
<Format>N</Format>
</Style>
</TextRun>
</TextRuns>
</Paragraph>
...Değiştirme kodu 6
...<TextRuns>
<TextRun>
<Value>=Code.BlankZero(SUM(Fields!VATBuffer2_Amount_Control83.Value))</Value>
<Style>
<FontSize>7pt</FontSize>
// Add the following line.
<FontWeight>Bold</FontWeight>
// End of the added line.
<Format>N</Format>
</Style>
</TextRun>
</TextRuns>
</Paragraph>
...Varolan kodu 7
...<TextRuns>
<TextRun>
<Value>=SUM(Fields!VATBuffer2_Base_VATBuffer2_Amount_Control82.Value)</Value>
<Style>
<FontSize>7pt</FontSize>
<Format>N</Format>
</Style>
</TextRun>
</TextRuns>
</Paragraph>
...Değiştirme kodu 7
...<TextRuns>
<TextRun>
<Value>=SUM(Fields!VATBuffer2_Base_VATBuffer2_Amount_Control82.Value)</Value>
<Style>
<FontSize>7pt</FontSize>
// Add the following line.
<FontWeight>Bold</FontWeight>
// End of the added line.
<Format>N</Format>
</Style>
</TextRun>
</TextRuns>
</Paragraph>
...Varolan kodu 8
...<TextRun>
<Value>=SUM(Fields!VATBuffer2_Base.Value)</Value>
<Style>
<FontSize>7pt</FontSize>
<FontWeight>Bold</FontWeight>
// Delete the following line.
<Format>=Fields!Base_Base2Format.Value</Format>
// End of the deleted line.
</Style>
</TextRun>
</TextRuns>
</Paragraph>
</Paragraphs>
...Değiştirme kodu 8
...<TextRun>
<Value>=SUM(Fields!VATBuffer2_Base.Value)</Value>
<Style>
<FontSize>7pt</FontSize>
<FontWeight>Bold</FontWeight>
// Add the following line.
<Format>N</Format>
// End of the added line.
</Style>
</TextRun>
</TextRuns>
</Paragraph>
</Paragraphs>
...Varolan kodu 9
...<KeepWithGroup>After</KeepWithGroup>
<KeepTogether>true</KeepTogether>
</TablixMember>
<TablixMember>
<Visibility>
// Delete the following line.
<Hidden>=IIF(Fields!AutoDocNo_Control91.Value="",TRUE,FALSE)</Hidden>
// End of the deleted line.
</Visibility>
<KeepWithGroup>After</KeepWithGroup>
<KeepTogether>true</KeepTogether>
</TablixMember>
<TablixMember>
...Değiştirme kodu 9
...<KeepWithGroup>After</KeepWithGroup>
<KeepTogether>true</KeepTogether>
</TablixMember>
<TablixMember>
<Visibility>
// Add the following line.
<Hidden>=IIF(LAST(Fields!AutoDocNo_Control91.Value)="",TRUE,FALSE)</Hidden>
// End of the added line.
</Visibility>
<KeepWithGroup>After</KeepWithGroup>
<KeepTogether>true</KeepTogether>
</TablixMember>
<TablixMember>
...Varolan kod 10
...<KeepWithGroup>After</KeepWithGroup>
<KeepTogether>true</KeepTogether>
</TablixMember>
<TablixMember>
<Visibility>
// Delete the following line.
<Hidden>=IIF(Fields!AutoDocNo_Control91.Value="",TRUE,FALSE)</Hidden>
// End of the deleted line.
</Visibility>
<KeepWithGroup>After</KeepWithGroup>
<KeepTogether>true</KeepTogether>
</TablixMember>
<TablixMember>
...Değiştirilen kod 10
...<KeepWithGroup>After</KeepWithGroup>
<KeepTogether>true</KeepTogether>
</TablixMember>
<TablixMember>
<Visibility>
// Add the following line.
<Hidden>=IIF(LAST(Fields!AutoDocNo_Control91.Value)="",TRUE,FALSE)</Hidden>
// End of the added line.
</Visibility>
<KeepWithGroup>After</KeepWithGroup>
<KeepTogether>true</KeepTogether>
</TablixMember>
<TablixMember>
...Varolan kodu 11
...<KeepWithGroup>Before</KeepWithGroup>
<KeepTogether>true</KeepTogether>
</TablixMember>
<TablixMember>
<Visibility>
// Delete the following line.
<Hidden>=IIF(Fields!AutoDocNo_Control91.Value="",TRUE,FALSE)</Hidden>
// End of the deleted line.
</Visibility>
<KeepWithGroup>Before</KeepWithGroup>
<KeepTogether>true</KeepTogether>
</TablixMember>
</TablixMembers>
...Değiştirilen kod 11
...<KeepWithGroup>Before</KeepWithGroup>
<KeepTogether>true</KeepTogether>
</TablixMember>
<TablixMember>
<Visibility>
// Add the following line.
<Hidden>=IIF(LAST(Fields!AutoDocNo_Control91.Value)="",TRUE,FALSE)</Hidden>
// End of the added line.
</Visibility>
<KeepWithGroup>Before</KeepWithGroup>
<KeepTogether>true</KeepTogether>
</TablixMember>
</TablixMembers>
...Varolan kodu 12
...<KeepWithGroup>Before</KeepWithGroup>
<KeepTogether>true</KeepTogether>
</TablixMember>
<TablixMember>
<Visibility>
// Delete the following line.
<Hidden>=iif(Fields!AutoDocNo.Value="" or (Fields!ShowAutoInvCred.Value=TRUE and Fields!SortPostDate.Value=TRUE),TRUE,FALSE)</Hidden>
// End of the deleted line.
</Visibility>
<KeepWithGroup>Before</KeepWithGroup>
<KeepTogether>true</KeepTogether>
</TablixMember>
</TablixMembers>
...Değiştirilen kod 12
...<KeepWithGroup>Before</KeepWithGroup>
<KeepTogether>true</KeepTogether>
</TablixMember>
<TablixMember>
<Visibility>
// Add the following line.
<Hidden>=iif(LAST(Fields!AutoDocNo.Value)="" or (Fields!ShowAutoInvCred.Value=TRUE and Fields!SortPostDate.Value=TRUE),TRUE,FALSE)</Hidden>
// End of the added line.
</Visibility>
<KeepWithGroup>Before</KeepWithGroup>
<KeepTogether>true</KeepTogether>
</TablixMember>
</TablixMembers>
...
Önkoşullar
Bu düzeltmeyi uygulamak için Microsoft Dynamics NAV 2013'ün İspanyolca sürümü olması gerekir.
Kaldırma bilgileri
Bu düzeltmeyi kaldıramazsınız.
Durum
Microsoft bu sorunun "Aşağıdakilere Uygulanır" bölümünde listelenen Microsoft ürünlerinde bulunduğunu onaylamıştır.
Not: Bu, doğrudan Microsoft destek kuruluşu bünyesinde oluşturulan bir "HIZLI YAYIN" makalesidir. Burada yer alan bilgiler, oluşan sorunlara yanıt olarak olduğu gibi sağlanmıştır. Makale hızla kullanıma sunulduğu için materyallerde yazım hataları olabilir ve materyaller bildirilmeksizin herhangi bir zamanda revize edilebilir. Kullanım koşullarıdiğer konular için bkz.