STOP 0x0000001E or System Hangs When Mirroring Seagate ST32550

Article ID: 137148 - View products that this article applies to.
This article was previously published under Q137148
Expand all | Collapse all

SYMPTOMS

When you perform mirroring on a FAT or NTFS system partition on a Seagate ST32550N (Firmware Revision 14) hard disk connected to a DPT 2022 or 2122 SCSI controller (Firmware Revision 06B0 BIOS 2.D7), the following STOP error message appears in Windows NT 3.5:
STOP: 0x0000001E
KMODE_EXCEPTION_NOT_HANDLED

When you perform the same procedure above in Windows NT 3.51, the Windows NT stops responding (hangs).
Back to the top | Give Feedback

CAUSE

This problem occurs when Revision 14 of the Seagate hard-disk firmware is used.
Back to the top | Give Feedback

RESOLUTION

Upgrade the firmware of the Seagate 32550N hard disk to Revision ASA2 16.
Back to the top | Give Feedback

Properties

Article ID: 137148 - Last Review: November 1, 2006 - Revision: 4.1
APPLIES TO
  • Microsoft Windows NT Server 3.5
  • Microsoft Windows NT Server 3.51
Keywords: 
KB137148
Back to the top | Give Feedback

Give Feedback

 
Back to the topBack to the top