Upgrade your Internet Experience

Article ID: 199118 - Last Review: October 30, 2006 - Revision: 3.1

Stop 0x50 Error Message Printing to Windows NT 4.0 Print Server

View products that this article applies to.
This article was previously published under Q199118

On This Page

Expand all | Collapse all

SYMPTOMS

When you attempt to print to a Microsoft Windows NT 4.0 print server, you may receive the following error message:
Stop 0x50 at address
Page_fault_in_nonpaged_area
Back to the top

CAUSE

This behavior can occur if you are printing to a Hewlett-Packard LaserJet 5 or LaserJet 6 print server that is using Hewlett-Packard printer drivers.
Back to the top

RESOLUTION

To work around this behavior, use either of the following methods:
Back to the top

Method 1

Contact your network administrator and request that the Windows NT printer drivers be installed.
Back to the top

Method 2

Download and install the latest driver for your printer from Hewlett-Packard's Web site.

Back to the top
APPLIES TO
  • Microsoft Windows 2000 Professional Edition
Back to the top
Keywords: 
kberrmsg kbprb kbprint KB199118
Back to the top
 

Get Help Now

Contact a support professional by E-mail, Online, or Phone

Article Translations