Article ID: 243993 - Last Review: March 2, 2007 - Revision: 3.2

Windows Time Service Continues to Monitor Secondary Client Broadcasts

View products that this article applies to.
This article was previously published under Q243993
IMPORTANT: This article contains information about modifying the registry. Before you modify the registry, make sure to back it up and make sure that you understand how to restore the registry if a problem occurs. For information about how to back up, restore, and edit the registry, click the following article number to view the article in the Microsoft Knowledge Base:
256986  (http://support.microsoft.com/kb/256986/EN-US/ ) Description of the Microsoft Windows Registry
Expand all | Collapse all

SYMPTOMS

After you upgrade your Microsoft Windows NT 4.0-based computer to Windows 2000 and then you use W32time.exe to configure the Windows Time service to ignore secondary client broadcasts, your Windows 2000-based computer continues to monitor secondary client broadcasts.
Back to the top

CAUSE

This problem can occur if the timesource value under the following registry key is set to "1":
HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\LanmanServer\Parameters
Back to the top

RESOLUTION

WARNING: If you use Registry Editor incorrectly, you may cause serious problems that may require you to reinstall your operating system. Microsoft cannot guarantee that you can solve problems that result from using Registry Editor incorrectly. Use Registry Editor at your own risk.


To work around this problem:
  1. Make sure that the W32time.ini file contains the value TIMESOURCE=NO.
  2. Use Registry Editor to view and then delete the timesource value under the following registry key:
    HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\LanmanServer\Parameters
  3. Stop and then start the Windows Time service.
Back to the top

STATUS

Microsoft has confirmed that this is a problem in the Microsoft products that are listed at the beginning of this article.
Back to the top

MORE INFORMATION

The timesource setting in the registry is not used by Windows 2000 to configure the Windows Time service. However, if this setting is in the registry, the Windows Time service will monitor secondary client broadcasts.

NOTE: Although W32time.exe may appear to work on Windows 2000-based computers, this service has been replaced by the Windows Time service. Because of this, using W32time.exe to configure the Windows Time service on Windows 2000-based computers is not supported.

For additional information about the Windows Time service, click the article number below to view the article in the Microsoft Knowledge Base:
224799  (http://support.microsoft.com/kb/224799/EN-US/ ) Basic Operation of the Windows Time Service
Back to the top
APPLIES TO
  • Microsoft Windows 2000 Server
  • Microsoft Windows 2000 Advanced Server
  • Microsoft Windows 2000 Professional Edition
Back to the top
Keywords: 
kbnetwork kbprb KB243993
Back to the top
 

Get Help Now

Contact a support professional by E-mail, Online, or Phone

Article Translations