Select the product you need help with

Definitions for system volume and boot volume

Article ID: 314470 - View products that this article applies to.

This article was previously published under Q314470

For a Microsoft Windows 2000 version of this article, see 100525

(http://support.microsoft.com/kb/100525/ )

SUMMARY

The following terms are typically used to address the volumes that contain the Windows XP or the Windows Vista startup files and operating system files, respectively:

system volume
boot volume

This article defines these volumes.

Back to the top | Give Feedback

The system volume refers to the disk volume that contains the hardware-specific files that are needed to start Windows, such as Ntldr, Boot.ini, and Ntdetect.com.

On computers that are running the Intel x86 line of CPU processors and later versions, the system volume must be a primary volume that is marked as active. This requirement can be fulfilled on any drive on the computer that the system BIOS searches when the operating system starts.

The system volume can be the same volume as the boot volume. However, this configuration is not required.

Boot volume

The boot volume refers to the disk volume that contains the Windows operating system files and the supporting files. By default, the Windows operating system files are in the WINDOWS folder, and the supporting files are in the WINDOWS\System32 folder.

The boot volume can be the same volume as the system volume. However, this configuration is not required.

There is only one system volume. However, there is one boot volume for each operating system in a multiboot system.

Back to the top | Give Feedback