Select the product you need help with
- Internet Explorer
- Windows Phone
- More products
Floppy Disk is Not Accessible, Not Formatted, or Not Recognized by Windows
Article ID: 140060 - View products that this article applies to.
This article was previously published under Q140060
When you access a floppy disk, you may receive one of the following error messages:
A:\ is not accessible.
The device is not ready.
Disk is not formatted
The disk in drive A is not formatted.
Do you want to format it now?
The same disk may work correctly with MS-DOS or Windows 95, or after you re-format the disk with Windows 98, Windows Millennium Edition, Windows NT, Windows 2000, Windows XP, or Windows Server 2003.
STOP: The disk media is not recognized, it may not be formatted.
This problem occurs on disks that do not contain a media descriptor byte in the BIOS parameter block (BPB) of the boot sector. Some older preformatted floppy disks do not contain a media descriptor byte. Older product disks may also not have the media descriptor byte.
The media descriptor indicates the type of medium currently in a drive. With MS-DOS and Windows 95, you do not have to set the media descriptor byte. Therefore this problem does not occur with these older operating systems.
The media descriptor byte is located in the BPB of the boot sector at offset 21 (15h) and in the first byte of each FAT on the disk.
To resolve this problem, re-format the floppy disk with Windows 98, Windows Millennium Edition, Windows NT, Windows 2000, Windows XP, or Windows Server 2003.
Warning: This workaround is for advanced users only. This workaround involves using a disk sector editor to modify the media descriptor byte on the floppy disk. Misuse of a disk sector editor may make all the data on the drive or volume permanently inaccessible. Disk sector editors function at a level "below" the file system, so the typical checks for maintaining disk consistency do not apply. This provides you direct access to every byte on the physical disk regardless of access credentials. Therefore, you can damage or permanently overwrite critical on-disk data structures. Use this workaround at your own risk.
To work around this problem, use a disk sector editor to change the BPB media descriptor byte to the appropriate value. For example, you can use the DiskProbe tool to do this on a Windows NT 4.0-based, Windows 2000-based, Windows XP-based, or Windows Server 2003-based computer. DiskProbe (Dskprobe.exe) is included with the Windows Support Tools for Windows XP Professional and Windows XP 64-Bit Edition, the Windows 2000 Support Tools, and Windows NT 4.0 Resource Kit Support Tools.
The following table lists the most common media descriptor bytes:
The BPB media descriptor byte is located in sector 0 of the disk, and looks similar to this:
Byte Capacity Media Size and Type ------------------------------------------------- F0 2.88 MB 3.5-inch, 2-sided, 36-sector F0 1.44 MB 3.5-inch, 2-sided, 18-sector F9 720K 3.5-inch, 2-sided, 9-sector F9 1.2 MB 5.25-inch, 2-sided, 15-sector FD 360K 5.25-inch, 2-sided, 9-sector FF 320K 5.25-inch, 2-sided, 8-sector FC 180K 5.25-inch, 1-sided, 9-sector FE 160K 5.25-inch, 1-sided, 8-sector FE 250K 8-inch, 1-sided, single-density FD 500K 8-inch, 2-sided, single-density FE 1.2 MB 8-inch, 2-sided, double-density F8 ----- Hard disk
addr data: 0000 EB 3C 90 4D 53 44 4F 53 35 2E 30 00 02 01 01 00 0010 02 E0 00 40 0B F0 09 00 12 00 02 00 00 00 00 00 xx <---- This byte above XX is the media descriptor byte and is at offset hexadecimal 21 (15h).
For additional information, click the following article number to view the article in the Microsoft Knowledge Base:
(http://support.microsoft.com/kb/301423/EN-US/ )HOW TO: Install the Windows 2000 Support Tools to a Windows 2000 Server-Based Computer
(http://support.microsoft.com/kb/306794/EN-US/ )How to Install the Support Tools from the Windows XP CD-ROM
(http://support.microsoft.com/kb/206848/EN-US/ )Windows NT Service Pack 4.0 Tools Not Included on CD-ROM
Article ID: 140060 - Last Review: December 3, 2007 - Revision: 4.7