"0x0000010E" Stop error occurs on a computer that uses hybrid graphics in a heterogeneous GPU configuration and that is running Windows 7 or Windows Server 2008 R2

Article translations Article translations
Article ID: 2551127 - View products that this article applies to.
Expand all | Collapse all

On This Page

Symptoms

Consider the following scenario:
  • You have a computer that is running Windows 7 or Windows Server 2008 R2.
  • The computer uses hybrid graphics in a heterogeneous graphics processing unit (GPU) configuration.
In this scenario, the computer crashes, and you may receive a Stop error message that resembles the following:
Stop 0x0000010E (Parameter1, Parameter2, Parameter3, Parameter4)
VIDEO_MEMORY_MANAGEMENT_INTERNAL
Notes
  • The issue can be triggered by one of the following conditions:
    • The computer runs in an actual low-memory condition.
    • You enable Driver Verifier for the graphics drivers, and you use the random allocation failure setting.
  • The parameters in this error message vary, depending on the configuration of the computer.
  • Not all "0x0000010E" Stop errors are caused by this issue.

Resolution

Hotfix information

A supported hotfix is available from Microsoft. However, this hotfix is intended to correct only the problem that is described in this article. Apply this hotfix only to systems that are experiencing the problem described in this article. This hotfix might receive additional testing. Therefore, if you are not severely affected by this problem, we recommend that you wait for the next software update that contains this hotfix.

If the hotfix is available for download, there is a "Hotfix download available" section at the top of this Knowledge Base article. If this section does not appear, contact Microsoft Customer Service and Support to obtain the hotfix.

Note If additional issues occur or if any troubleshooting is required, you might have to create a separate service request. The usual support costs will apply to additional support questions and issues that do not qualify for this specific hotfix. For a complete list of Microsoft Customer Service and Support telephone numbers or to create a separate service request, visit the following Microsoft website:
http://support.microsoft.com/contactus/?ws=support
Note The "Hotfix download available" form displays the languages for which the hotfix is available. If you do not see your language, it is because a hotfix is not available for that language.

Prerequisites

To apply this hotfix, you must be running Windows 7 Service Pack 1 (SP1) or Windows Server 2008 R2 Service Pack 1 (SP1). For more information about how to obtain a Windows 7 or Windows Server 2008 R2 service pack, click the following article number to view the article in the Microsoft Knowledge Base:
976932 Information about Service Pack 1 for Windows 7 and for Windows Server 2008 R2

Registry information

To use the hotfix in this package, you do not have to make any changes to the registry.

Restart requirement

You must restart the computer after you apply this hotfix.

Hotfix replacement information

This hotfix does not replace a previously released hotfix.

File information

The global version of this hotfix installs files that have the attributes that are listed in the following tables. The dates and the times for these files are listed in Coordinated Universal Time (UTC). The dates and the times for these files on your local computer are displayed in your local time together with your current daylight saving time (DST) bias. Additionally, the dates and the times may change when you perform certain operations on the files.
Windows 7 and Windows Server 2008 R2 file information notes
Important Windows 7 hotfixes and Windows Server 2008 R2 hotfixes are included in the same packages. However, hotfixes on the Hotfix Request page are listed under both operating systems. To request the hotfix package that applies to one or both operating systems, select the hotfix that is listed under "Windows 7/Windows Server 2008 R2" on the page. Always refer to the "Applies To" section in articles to determine the actual operating system that each hotfix applies to.
  • The files that apply to a specific product, milestone (RTM, SPn), and service branch (LDR, GDR) can be identified by examining the file version numbers as shown in the following table:
    Collapse this tableExpand this table
    VersionProductMilestoneService branch
    6.1.760 0.16xxxWindows 7 and Windows Server 2008 R2RTMGDR
    6.1.760 0.20xxxWindows 7 and Windows Server 2008 R2RTMLDR
    6.1.760 1.17xxxWindows 7 and Windows Server 2008 R2SP1GDR
    6.1.760 1.21xxxWindows 7 and Windows Server 2008 R2SP1LDR
  • GDR service branches contain only those fixes that are widely released to address widespread, critical issues. LDR service branches contain hotfixes in addition to widely released fixes.
  • The MANIFEST files (.manifest) and the MUM files (.mum) that are installed for each environment are listed separately in the "Additional file information for Windows 7 and for Windows Server 2008 R2" section. MUM and MANIFEST files, and the associated security catalog (.cat) files, are critical to maintaining the state of the updated component. The security catalog files, for which the attributes are not listed, are signed with a Microsoft digital signature.
For all supported x86-based versions of Windows 7
Collapse this tableExpand this table
File nameFile versionFile sizeDateTime
Cdd.dll6.1.7601.17514107,52020-Nov-201011:56
Dxgkrnl.sys6.1.7601.21730729,47219-May-201106:16
Dxgmms1.sys6.1.7601.21730219,00819-May-201106:16
Lddmcore.ptxmlNot applicable1,15113-Jul-200920:32
For all supported x64-based versions of Windows 7 and of Windows Server 2008 R2
Collapse this tableExpand this table
File nameFile versionFile sizeDateTime
Cdd.dll6.1.7601.17514144,38420-Nov-201012:55
Dxgkrnl.sys6.1.7601.21730983,93619-May-201105:54
Dxgmms1.sys6.1.7601.21730265,08819-May-201105:54
Lddmcore.ptxmlNot applicable1,15113-Jul-200920:25
For all supported IA-64-based versions of Windows Server 2008 R2
Collapse this tableExpand this table
File nameFile versionFile sizeDateTime
Cdd.dll6.1.7601.17514347,13620-Nov-201010:06
Dxgkrnl.sys6.1.7601.217302,504,06419-May-201104:58
Dxgmms1.sys6.1.7601.21730669,56819-May-201104:58
Lddmcore.ptxmlNot applicable1,15113-Jul-200920:25

Status

Microsoft has confirmed that this is a problem in the Microsoft products that are listed in the "Applies to" section.

More information

For more information, click the following article number to view the article in the Microsoft Knowledge Base:
244617 Using Driver Verifier to identify issues with Windows drivers for advanced users
For more information about software update terminology, click the following article number to view the article in the Microsoft Knowledge Base:
824684 Description of the standard terminology that is used to describe Microsoft software updates

Additional file information

Additional file information for Windows 7 and for Windows Server 2008 R2

Additional files for all supported x86-based versions of Windows 7
Collapse this tableExpand this table
File nameX86_cc86ec273e15969523d219dcfd6f13fa_31bf3856ad364e35_6.1.7601.21730_none_b1a025b6755997cc.manifest
File versionNot applicable
File size696
Date (UTC)19-May-2011
Time (UTC)20:51
File nameX86_microsoft-windows-lddmcore_31bf3856ad364e35_6.1.7601.21730_none_ae40003b5b004dfe.manifest
File versionNot applicable
File size13,305
Date (UTC)19-May-2011
Time (UTC)20:53
Additional files for all supported x64-based versions of Windows 7 and of Windows Server 2008 R2
Collapse this tableExpand this table
File nameAmd64_0286b74f9b82c3c3f73f025af2760a87_31bf3856ad364e35_6.1.7601.21730_none_336657c44276a716.manifest
File versionNot applicable
File size700
Date (UTC)19-May-2011
Time (UTC)20:51
File nameAmd64_microsoft-windows-lddmcore_31bf3856ad364e35_6.1.7601.21730_none_0a5e9bbf135dbf34.manifest
File versionNot applicable
File size13,309
Date (UTC)19-May-2011
Time (UTC)20:55
Additional files for all supported IA-64-based versions of Windows Server 2008 R2
Collapse this tableExpand this table
File nameIa64_042b472a94d81287144147ed27c0bdde_31bf3856ad364e35_6.1.7601.21730_none_c5a9ad5a1d862813.manifest
File versionNot applicable
File size698
Date (UTC)19-May-2011
Time (UTC)20:51
File nameIa64_microsoft-windows-lddmcore_31bf3856ad364e35_6.1.7601.21730_none_ae41a4315afe56fa.manifest
File versionNot applicable
File size13,307
Date (UTC)19-May-2011
Time (UTC)20:51

Properties

Article ID: 2551127 - Last Review: June 21, 2014 - Revision: 2.0
Applies to
  • Windows 7 Service Pack 1, when used with:
    • Windows 7 Enterprise
    • Windows 7 Home Basic
    • Windows 7 Home Premium
    • Windows 7 Professional
    • Windows 7 Starter
    • Windows 7 Ultimate
  • Windows Server 2008 R2 Service Pack 1, when used with:
    • Windows Server 2008 R2 Datacenter
    • Windows Server 2008 R2 Enterprise
    • Windows Server 2008 R2 for Itanium-Based Systems
    • Windows Server 2008 R2 Foundation
    • Windows Server 2008 R2 Standard
    • Windows Web Server 2008 R2
Keywords: 
kbautohotfix kbqfe kbhotfixserver kbfix kbexpertiseadvanced kbsurveynew KB2551127

Give Feedback

 

Contact us for more help

Contact us for more help
Connect with Answer Desk for expert help.
Get more support from smallbusiness.support.microsoft.com