Description of the Outlook 2010 hotfix package (x86 Outlook-x-none.msp, x64 Outlook-x-none.msp): February 28, 2012

Article translations Article translations
Article ID: 2597137 - View products that this article applies to.
Expand all | Collapse all

On This Page

Summary

This article describes the Microsoft Outlook 2010 issues that are fixed in the hotfix package that is dated February 28, 2012.

INTRODUCTION

Issues that this hotfix package fixes

  • Consider the following scenario:
    • You add a distribution list as an attendee in an email message in Outlook 2010, and then you send the email message.
    • You close Outlook 2010, and then you restart Outlook 2010.
    • You create a new email message, and then you type the first characters of the name of one of the members in the distribution list in the To or Cc field.
    In this scenario, the Autocomplete feature displays no suggestions for the name that you type.
  • When you use code to process a .pst file, you receive a MAPI_E_CORRUPT_STORE error code. However, the .pst file is not corrupted.
  • When you receive a meeting response from someone outside your organization who is in a different time zone, the time zone that is shown in the meeting response is displayed incorrectly.
  • After you receive a [80004005-501-4B9-560] synchronization error message in the Organizational Forms folder in Outlook 2010, the synchronization status in Outlook 2010 is displayed as This folder is up to date and no longer changes to All folders are up to date. The Organizational Forms folder contains only metadata and should not affect the up-to-date status of the mailbox.
  • When you receive an email message that is forwarded automatically by using an IMPA4 email account in Outlook 2010, the body of the message is blank.
  • Consider the following scenario:
    • You use an email account that is in online mode in Outlook 2010.
    • While you compose an email message, the network is disabled, and then the network is re-enabled.
    • You send the email message.
    In this scenario, the email message that you sent is received as a blank email message.

    Note After you apply this hotfix, you can send an email message without an attachment correctly in this scenario. However, if you try to send an email message that has an attachment, you receive the following error message:
    Changes made to the item were lost due to a reconnect with the server
    In this situation, you must create a new email message.
  • Assume that you set the time zone to UTC+9:00 Osaka, Sapporo, Tokyo on a computer that has the Japanese version of Windows XP installed, and then you create a new appointment in the Japanese version of Outlook 2010. In this situation, the time information in the appointment uses the Seoul or Irkutsk time zone.
  • When you use an email account that contains a period (.) in the alias, and you have the Always prompt for logon credentials option enabled in Outlook 2010, the Windows Security dialog box does not display the domain information.
  • Assume that you change the display name of a .pst file in a profile in Outlook 2010 to a name that is different to the file name. If you remove the .pst file from the profile and then re-add the .pst file to the profile, the display name of the profile is changed to the .pst file name.
  • When you use MAPI-MIME Conversion API to convert a MAPI message to a MIME message, the MAPI message content is changed.
  • When you use QuickStep to forward a Digital Rights Management (DRM) email message, the headers in the email message (for example, From, To, and Subject) are not displayed.
  • Assume that you have an Exchange email account that is in online mode in Outlook 2010. When the Exchange server is disconnected, and you try to open a public folder, Outlook 2010 tries continuously to connect to another server.
  • When you receive an email message that contains some Korean characters in Outlook 2010 from an Apple iOS device, the text in the email message is displayed incorrectly.
  • Autodiscover does not work as expected in Outlook 2010 when an email account has an email address that contains an ampersand (&).
  • After you create a folder for a shared mailbox in Outlook 2010, the folder is not displayed until Outlook 2010 is restarted.
  • Consider the following scenario:
    • You create a meeting request in Outlook 2010, and Outlook 2010 has a Form Region Add-in installed.
    • You send the meeting request to an attendee.
    • The attendee opens the meeting request and then sends a time change proposal to you.
    • You open the proposal, you click View All Proposal, and then you close the meeting request.
    In this scenario, Outlook 2010 crashes.
  • Assume that you disable the Use Cached Exchange Mode for new and existing Outlook profiles option in the Office Customization Tool or in Group Policy. In this situation, when you create a new profile for a user, the profile uses Cached mode unexpectedly.
  • When you try to create a rule that involves a contact group in Outlook 2010, you receive the following message:
    'name of the contact group' is a contact group that may not be used with this feature. Would you like to use the individual members of 'name of the contact group' instead?

    Then, when you click No, Outlook 2010 crashes.
  • Consider the following scenario:
    • You share a mailbox with a user who has a profile that uses Cached mode in Outlook 2010.
    • The user creates an email message and saves it as a draft.
    • The user moves the draft to the shared mailbox.
    • You send the draft.
    In this scenario, the email message remains in the Outbox of the shared mailbox and is not sent. Additionally, the email message is displayed unexpectedly in the Sent Items folder.
  • 2597991 An email message body contains text that is added from previously opened email messages when you access a mailbox by using an IMAP4 client in Outlook 2010

Resolution

Hotfix information

A supported hotfix is available from Microsoft. However, this hotfix is intended to correct only the problems that are described in this article. Apply this hotfix only to systems that are experiencing the problem described in this article. This hotfix might receive additional testing. Therefore, if you are not severely affected by this problem, we recommend that you wait for the next software update that contains this hotfix.

If the hotfix is available for download, there is a "Hotfix download available" section at the top of this Knowledge Base article. If this section does not appear, contact Microsoft Customer Service and Support to obtain the hotfix.

Note If additional issues occur or if any troubleshooting is required, you might have to create a separate service request. The usual support costs will apply to additional support questions and issues that do not qualify for this specific hotfix. For a complete list of Microsoft Customer Service and Support telephone numbers or to create a separate service request, visit the following Microsoft website:
http://support.microsoft.com/contactus/?ws=support
Note The "Hotfix download available" form displays the languages for which the hotfix is available. If you do not see your language, it is because a hotfix is not available for that language.

Prerequisites

To apply this hotfix package, you must have Microsoft Office 2010 or Office 2010 Service Pack 1 (SP1) installed. For more information, click the following article number to view the article in the Microsoft Knowledge Base:
2510690 List of all Office 2010 SP1 packages

Restart requirement

You may have to restart the computer after you apply this hotfix.

Hotfix replacement information

This hotfix does not replace a previously released hotfix.

Registry information

To use the hotfix in this package, you do not have to make any changes to the registry.

File information

This hotfix may not contain all the files that you must have to fully update a product to the latest build. This hotfix contains only the files that you must have to correct the issues that are listed in this article.

The global version of this hotfix package uses a Microsoft Windows Installer package to install the hotfix package. The dates and the times for these files are listed in Coordinated Universal Time (UTC) in the following table. When you view the file information, the date is converted to local time. To find the difference between UTC and local time, use the Time Zone tab in the Date and Time item in Control Panel.

x86
Download information

Collapse this tableExpand this table
File nameFile versionFile sizeDateTime
Outlook2010-kb2597137-fullfile-x86-glb.exe14.0.6117.500018,914,4329-Feb-1221:34
Microsoft Windows Installer .msp file information

Collapse this tableExpand this table
File nameFile versionFile sizeDateTime
Outlook-x-none.mspNot Applicable23,710,2089-Feb-128:41
Outlook-x-none.msp information

Collapse this tableExpand this table
File nameFile versionFile sizeDateTimePlatform
Cnfnot32.exe14.0.6009.1000151,9041-Sep-1113:10Not Applicable
Contab32.dll14.0.6009.1000135,0321-Sep-1113:10x86
Dlgsetp.dll14.0.6108.500087,9201-Sep-1113:10x86
Emsmdb32.dll14.0.6117.50001,740,1529-Feb-123:34Not Applicable
Envelope.dll14.0.6024.1000155,0081-Sep-1113:10x86
Exsec32.dll14.0.6019.1000330,5761-Sep-1113:10Not Applicable
Impmail.dll14.0.6009.1000135,5281-Sep-1113:10x86
Mapiph.dll14.0.6108.5000273,3121-Sep-1113:10x86
Mimedir.dll14.0.6114.5000360,21628-Nov-118:37x86
Mspst32.dll14.0.6117.50001,258,8649-Feb-123:34Not Applicable
Olmapi32.dll14.0.6117.50003,297,0809-Feb-123:34x86
Omsmain.dll14.0.6015.1000724,8641-Sep-1117:13x86
Omsxp32.dll14.0.6015.1000233,3601-Sep-1117:13x86
Outlacct.dll14.0.6009.100028,0001-Sep-1113:10x86
Outlctl.dll14.0.6009.1000122,7201-Sep-1113:10x86
Outlmime.dll14.0.6117.5000524,6167-Feb-1220:22x86
Outlook.exe14.0.6117.500015,959,8409-Feb-123:34x86
Outlph.dll14.0.6024.1000329,6161-Sep-1113:10x86
Outlrpc.dll14.0.6016.100043,3521-Sep-1113:10x86
Outlvbs.dll14.0.6009.100055,6641-Sep-1113:10Not Applicable
Pstprx32.dll14.0.6117.5000310,0567-Feb-1220:22x86
Recall.dll14.0.6108.500044,9041-Sep-1113:10x86
Rtfhtml.dll14.0.6009.1000423,2801-Sep-1113:10x86
Scanpst.exe14.0.6015.100039,3281-Sep-1113:10Not Applicable
Scnpst32.dll14.0.6106.5000336,8081-Sep-1113:10x86
Scnpst64.dll14.0.6106.5000347,5681-Sep-1113:10x86
Transmgr.dll14.0.6009.1000105,34429-Aug-1110:09x86
x64
Download information

Collapse this tableExpand this table
File nameFile versionFile sizeDateTime
Outlook2010-kb2597137-fullfile-x64-glb.exe14.0.6117.500021,759,8889-Feb-1219:18

Microsoft Windows Installer .msp file information

Collapse this tableExpand this table
File nameFile versionFile sizeDateTime
Outlook-x-none.mspNot Applicable26,315,2649-Feb-128:45
Outlook-x-none.msp information

Collapse this tableExpand this table
File nameFile versionFile sizeDateTimePlatform
Cnfnot32.exe14.0.6009.1000226,1441-Sep-1113:12Not Applicable
Contab32.dll14.0.6009.1000183,6721-Sep-1113:12x64
Dlgsetp.dll14.0.6108.5000118,1281-Sep-1113:12x64
Emsmdb32.dll14.0.6117.50002,315,6409-Feb-123:45Not Applicable
Envelope.dll14.0.6024.1000219,5201-Sep-1113:12x64
Exsec32.dll14.0.6019.1000475,4721-Sep-1113:12Not Applicable
Impmail.dll14.0.6009.1000186,7281-Sep-1113:12x64
Mapiph.dll14.0.6108.5000417,1841-Sep-1113:12x64
Mimedir.dll14.0.6114.5000545,04828-Nov-118:36x64
Mspst32.dll14.0.6117.50001,692,0169-Feb-123:45Not Applicable
Olmapi32.dll14.0.6117.50004,622,6489-Feb-123:45x64
Omsmain.dll14.0.6015.10001,104,2561-Sep-1117:13x64
Omsxp32.dll14.0.6015.1000365,9681-Sep-1117:13x64
Outlacct.dll14.0.6009.100040,8001-Sep-1113:13x64
Outlctl.dll14.0.6009.1000166,2401-Sep-1113:13x64
Outlmime.dll14.0.6117.5000721,2247-Feb-1220:36x64
Outlook.exe14.0.6117.500024,532,7689-Feb-123:45x64
Outlph.dll14.0.6024.1000390,0321-Sep-1113:13x64
Outlrpc.dll14.0.6016.100058,7121-Sep-1113:13x64
Outlvbs.dll14.0.6009.100071,5361-Sep-1113:13Not Applicable
Pstprx32.dll14.0.6117.5000428,8407-Feb-1220:36x64
Recall.dll14.0.6108.500056,6801-Sep-1113:13x64
Rtfhtml.dll14.0.6009.1000567,1521-Sep-1113:13x64
Scanpst.exe14.0.6015.100047,0081-Sep-1113:13Not Applicable
Scnpst32.dll14.0.6106.5000450,4721-Sep-1113:13x64
Scnpst64.dll14.0.6106.5000448,4321-Sep-1113:13x64
Transmgr.dll14.0.6009.1000130,94429-Aug-1110:09x64

References

For more information about software update terminology, click the following article number to view the article in the Microsoft Knowledge Base:
824684 Description of the standard terminology that is used to describe Microsoft software updates

Properties

Article ID: 2597137 - Last Review: September 3, 2013 - Revision: 4.0
Applies to
  • Microsoft Outlook 2010
Keywords: 
kbqfe kbsurveynew kbexpertiseinter kbhotfixrollup kbhotfixserver kbautohotfix kbhotfixallversions KB2597137

Give Feedback

 

Contact us for more help

Contact us for more help
Connect with Answer Desk for expert help.
Get more support from smallbusiness.support.microsoft.com