Symptoms
Consider the following scenario:
-
You have a computer that is running Windows 7 or Windows Server 2008 R2 and that has hotfix 2735855 installed. Or, you have a computer that is running Windows 8 or Windows Server 2012.
-
You run an application that was developed by using the Windows Filtering Platform (WFP) API. For example, you run antivirus or security software that provides network filtering capabilities by using third-party WFP callout drivers.
In this scenario, data corruption occurs, and the network connection disconnects unexpectedly.
Cause
This issue occurs because the delivery state variables are updated incorrectly when data is in delivery. Additionally, data is not copied in a low memory situation. Therefore, the application does not receive the pending delivery data that is already acknowledged.
Resolution
Cumulative Update information
To resolve this issue in Windows 8 or Windows Server 2012, install the cumulative update 2811660. For more information about how to obtain this cumulative update package, click the following article number to view the article in the Microsoft Knowledge Base:
2811660 Windows 8 and Windows Server 2012 cumulative update: March 2013
Hotfix information
A supported hotfix is available from Microsoft. However, this hotfix is intended to correct only the problem that is described in this article. Apply this hotfix only to systems that are experiencing the problem described in this article. This hotfix might receive additional testing. Therefore, if you are not severely affected by this problem, we recommend that you wait for the next software update that contains this hotfix.If the hotfix is available for download, there is a "Hotfix download available" section at the top of this Knowledge Base article. If this section does not appear, contact Microsoft Customer Service and Support to obtain the hotfix. Note If additional issues occur or if any troubleshooting is required, you might have to create a separate service request. The usual support costs will apply to additional support questions and issues that do not qualify for this specific hotfix. For a complete list of Microsoft Customer Service and Support telephone numbers or to create a separate service request, visit the following Microsoft website:
http://support.microsoft.com/contactus/?ws=supportNote The "Hotfix download available" form displays the languages for which the hotfix is available. If you do not see your language, it is because a hotfix is not available for that language.
Prerequisites
To apply this hotfix, you must be running Windows 7 Service Pack 1 (SP1) or Windows Server 2008 R2 SP1.For more information about how to obtain a Windows 7 or Windows Server 2008 R2 service pack, click the following article number to view the article in the Microsoft Knowledge Base:
976932 Information about Service Pack 1 for Windows 7 and for Windows Server 2008 R2
Registry information
To apply this hotfix, you do not have to make any changes to the registry.
Restart requirement
You must restart the computer after you apply this hotfix.
Hotfix replacement information
This hotfix does not replace a previously released hotfix.
The global version of this hotfix installs files that have the attributes that are listed in the following tables. The dates and the times for these files are listed in Coordinated Universal Time (UTC). The dates and the times for these files on your local computer are displayed in your local time together with your current daylight saving time (DST) bias. Additionally, the dates and the times may change when you perform certain operations on the files.
Windows 7 and Windows Server 2008 R2 file information notesImportant Windows 7 hotfixes and Windows Server 2008 R2 hotfixes are included in the same packages. However, hotfixes on the Hotfix Request page are listed under both operating systems. To request the hotfix package that applies to one or both operating systems, select the hotfix that is listed under "Windows 7/Windows Server 2008 R2" on the page. Always refer to the "Applies To" section in articles to determine the actual operating system that each hotfix applies to.
-
The files that apply to a specific product, milestone (RTM, SPn), and service branch (LDR, GDR) can be identified by examining the file version numbers as shown in the following table:
Version
Product
Milestone
Service branch
6.1.760 1.17xxx
Windows 7 and Windows Server 2008 R2
SP1
GDR
6.1.760 1.22xxx
Windows 7 and Windows Server 2008 R2
SP1
LDR
-
GDR service branches contain only those fixes that are widely released to address widespread, critical issues. LDR service branches contain hotfixes in addition to widely released fixes.
-
The MANIFEST files (.manifest) and the MUM files (.mum) that are installed for each environment are listed separately in the "Additional file information for Windows 7 and for Windows Server 2008 R2" section. MUM and MANIFEST files, and the associated security catalog (.cat) files, are critical to maintaining the state of the updated component. The security catalog files, for which the attributes are not listed, are signed with a Microsoft digital signature.
For all supported x86-based versions of Windows 7
|
File name |
File version |
File size |
Date |
Time |
Platform |
|---|---|---|---|---|---|
|
Netio.sys |
6.1.7601.17939 |
240,496 |
22-Aug-2012 |
17:16 |
x86 |
|
Netio.sys |
6.1.7601.22176 |
240,472 |
29-Nov-2012 |
05:41 |
x86 |
|
Fwpkclnt.sys |
6.1.7601.18014 |
187,736 |
29-Nov-2012 |
05:11 |
x86 |
|
Tcpip.sys |
6.1.7601.18014 |
1,293,672 |
29-Nov-2012 |
05:11 |
x86 |
|
Fwpkclnt.sys |
6.1.7601.22176 |
187,736 |
29-Nov-2012 |
05:41 |
x86 |
|
Tcpip.sys |
6.1.7601.22176 |
1,307,992 |
29-Nov-2012 |
05:41 |
x86 |
For all supported x64-based versions of Windows 7 and of Windows Server 2008 R2
|
File name |
File version |
File size |
Date |
Time |
Platform |
|---|---|---|---|---|---|
|
Netio.sys |
6.1.7601.17939 |
376,688 |
22-Aug-2012 |
18:12 |
x64 |
|
Netio.sys |
6.1.7601.22176 |
376,680 |
29-Nov-2012 |
06:08 |
x64 |
|
Fwpkclnt.sys |
6.1.7601.18014 |
288,088 |
29-Nov-2012 |
06:11 |
x64 |
|
Tcpip.sys |
6.1.7601.18014 |
1,913,192 |
29-Nov-2012 |
06:11 |
x64 |
|
Fwpkclnt.sys |
6.1.7601.22176 |
288,088 |
29-Nov-2012 |
06:08 |
x64 |
|
Tcpip.sys |
6.1.7601.22176 |
1,901,928 |
29-Nov-2012 |
06:08 |
x64 |
For all supported IA-64-based versions of Windows Server 2008 R2
|
File name |
File version |
File size |
Date |
Time |
Platform |
|---|---|---|---|---|---|
|
Netio.sys |
6.1.7601.17939 |
711,024 |
22-Aug-2012 |
16:51 |
IA-64 |
|
Netio.sys |
6.1.7601.22176 |
711,000 |
29-Nov-2012 |
04:55 |
IA-64 |
|
Fwpkclnt.sys |
6.1.7601.18014 |
482,152 |
29-Nov-2012 |
04:54 |
IA-64 |
|
Tcpip.sys |
6.1.7601.18014 |
3,796,824 |
29-Nov-2012 |
04:54 |
IA-64 |
|
Fwpkclnt.sys |
6.1.7601.22176 |
482,136 |
29-Nov-2012 |
04:55 |
IA-64 |
|
Tcpip.sys |
6.1.7601.22176 |
3,822,440 |
29-Nov-2012 |
04:55 |
IA-64 |
Status
Microsoft has confirmed that this is a problem in the Microsoft products that are listed in the "Applies to" section.
More Information
For more information about software update terminology, click the following article number to view the article in the Microsoft Knowledge Base:
824684 Description of the standard terminology that is used to describe Microsoft software updates
Additional file information
