Error message when you try to map a drive to a network share in Windows 7 or Windows Server 2008 R2

Article translations Article translations
Article ID: 2807716 - View products that this article applies to.
Expand all | Collapse all

On This Page

Symptoms

Consider the following scenario:
  • You use user credentials to map a drive to a network share on a client computer that is running Windows 7 or Windows Server 2008 R2.
  • You perform an action that causes a change notification I/O request packet (IRP) to be sent from the drive. For example, you open Windows Explorer and then click the mapped drive. 
  • You disconnect the mapped drive.
  • You try to map a drive to the network share by using different user credentials.  
In this scenario, you receive an error message that resembles the following:
Error 1219 ERROR_SESSION_CREDENTIAL_CONFLICT

Cause

This issue occurs because a cached handle is not closed. When you disconnect the mapped drive from the network share, a handle is cached. This is because the network share is a root of the share. Then, when the drive sends the change notification IRP and then cancels the change notification IRP, the cached handle is not closed. Therefore, the handle blocks the connection between the drive and network share for other users.

Resolution

Hotfix information

A supported hotfix is available from Microsoft. However, this hotfix is intended to correct only the problem that is described in this article. Apply this hotfix only to systems that are experiencing the problem described in this article. This hotfix might receive additional testing. Therefore, if you are not severely affected by this problem, we recommend that you wait for the next software update that contains this hotfix.

If the hotfix is available for download, there is a "Hotfix download available" section at the top of this Knowledge Base article. If this section does not appear, contact Microsoft Customer Service and Support to obtain the hotfix.

Note If additional issues occur or if any troubleshooting is required, you might have to create a separate service request. The usual support costs will apply to additional support questions and issues that do not qualify for this specific hotfix. For a complete list of Microsoft Customer Service and Support telephone numbers or to create a separate service request, visit the following Microsoft website:
http://support.microsoft.com/contactus/?ws=support
Note The "Hotfix download available" form displays the languages for which the hotfix is available. If you do not see your language, it is because a hotfix is not available for that language.

Prerequisites

To apply this hotfix, you must be running Windows 7 Service Pack 1 (SP1) or Windows Server 2008 R2 SP1.

For more information about how to obtain a Windows 7 or Windows Server 2008 R2 service pack, click the following article number to view the article in the Microsoft Knowledge Base:
976932 Information about Service Pack 1 for Windows 7 and for Windows Server 2008 R2

Registry information

To apply this hotfix, you do not have to make any changes to the registry.

Restart requirement

You must restart the computer after you apply this hotfix.

Hotfix replacement information

This hotfix does not replace a previously released hotfix.

File information

Collapse this imageExpand this image
assets folding start collapsed
The global version of this hotfix installs files that have the attributes that are listed in the following tables. The dates and the times for these files are listed in Coordinated Universal Time (UTC). The dates and the times for these files on your local computer are displayed in your local time together with your current daylight saving time (DST) bias. Additionally, the dates and the times may change when you perform certain operations on the files.
Windows 7 and Windows Server 2008 R2 file information notes
Important Windows 7 hotfixes and Windows Server 2008 R2 hotfixes are included in the same packages. However, hotfixes on the Hotfix Request page are listed under both operating systems. To request the hotfix package that applies to one or both operating systems, select the hotfix that is listed under "Windows 7/Windows Server 2008 R2" on the page. Always refer to the "Applies To" section in articles to determine the actual operating system that each hotfix applies to.
  • The files that apply to a specific product, SR_Level (RTM, SPn), and service branch (LDR, GDR) can be identified by examining the file version numbers as shown in the following table:
    Collapse this tableExpand this table
    VersionProductMilestoneService branch
    6.1.760 1.22xxxWindows 7 and Windows Server 2008 R2SP1LDR
  • The MANIFEST files (.manifest) and the MUM files (.mum) that are installed for each environment are listed separately in the "Additional file information for Windows 7 and for Windows Server 2008 R2" section. MUM and MANIFEST files, and the associated security catalog (.cat) files, are extremely important to maintaining the state of the updated component. The security catalog files, for which the attributes are not listed, are signed with a Microsoft digital signature.
For all supported x86-based versions of Windows 7
Collapse this imageExpand this image
assets folding start collapsed
Collapse this tableExpand this table
File nameFile versionFile sizeDateTimePlatform
Mrxsmb20.sys6.1.7601.2223197,28025-Jan-201302:37x86
Collapse this imageExpand this image
assets folding end collapsed
For all supported x64-based versions of Windows 7 and of Windows Server 2008 R2
Collapse this imageExpand this image
assets folding start collapsed
Collapse this tableExpand this table
File nameFile versionFile sizeDateTimePlatform
Mrxsmb20.sys6.1.7601.22231128,00025-Jan-201302:58x64
Collapse this imageExpand this image
assets folding end collapsed
For all supported IA-64-based versions of Windows Server 2008 R2
Collapse this imageExpand this image
assets folding start collapsed
Collapse this tableExpand this table
File nameFile versionFile sizeDateTimePlatform
Mrxsmb20.sys6.1.7601.22231310,78425-Jan-201302:28IA-64
Collapse this imageExpand this image
assets folding end collapsed
Collapse this imageExpand this image
assets folding end collapsed

Status

Microsoft has confirmed that this is a problem in the Microsoft products that are listed in the "Applies to" section.

More information

For more information about software update terminology, click the following article number to view the article in the Microsoft Knowledge Base:
824684 Description of the standard terminology that is used to describe Microsoft software updates

Additional file information

Collapse this imageExpand this image
assets folding start collapsed

Additional file information for Windows 7 and for Windows Server 2008 R2

Additional files for all supported x86-based versions of Windows 7
Collapse this imageExpand this image
assets folding start collapsed
Collapse this tableExpand this table
File nameX86_microsoft-windows-smb20-minirdr_31bf3856ad364e35_6.1.7601.22231_none_8d533d3c0138aaad.manifest
File versionNot applicable
File size4,035
Date (UTC)25-Jan-2013
Time (UTC)04:52
PlatformNot applicable
Collapse this imageExpand this image
assets folding end collapsed
Additional files for all supported x64-based versions of Windows 7 and of Windows Server 2008 R2
Collapse this imageExpand this image
assets folding start collapsed
Collapse this tableExpand this table
File nameAmd64_microsoft-windows-smb20-minirdr_31bf3856ad364e35_6.1.7601.22231_none_e971d8bfb9961be3.manifest
File versionNot applicable
File size4,039
Date (UTC)25-Jan-2013
Time (UTC)05:57
PlatformNot applicable
Collapse this imageExpand this image
assets folding end collapsed
Additional files for all supported IA-64-based versions of Windows Server 2008 R2
Collapse this imageExpand this image
assets folding start collapsed
Collapse this tableExpand this table
File nameIa64_microsoft-windows-smb20-minirdr_31bf3856ad364e35_6.1.7601.22231_none_8d54e1320136b3a9.manifest
File versionNot applicable
File size4,037
Date (UTC)25-Jan-2013
Time (UTC)05:00
PlatformNot applicable
Collapse this imageExpand this image
assets folding end collapsed
Collapse this imageExpand this image
assets folding end collapsed

Properties

Article ID: 2807716 - Last Review: March 13, 2013 - Revision: 1.0
Applies to
  • Windows Server 2008 R2 Enterprise
  • Windows Server 2008 R2 Datacenter
  • Windows Server 2008 R2 for Itanium-Based Systems
  • Windows Server 2008 R2 Foundation
  • Windows Server 2008 R2 Standard
  • Windows Web Server 2008 R2
  • Windows 7 Enterprise
  • Windows 7 Home Basic
  • Windows 7 Home Premium
  • Windows 7 Professional
  • Windows 7 Starter
  • Windows 7 Ultimate
Keywords: 
kbautohotfix kbqfe kbhotfixserver kbfix kbsurveynew kbexpertiseadvanced kberrmsg KB2807716

Give Feedback

 

Contact us for more help

Contact us for more help
Connect with Answer Desk for expert help.
Get more support from smallbusiness.support.microsoft.com