Article ID: 885409 - View products that this article applies to.
Microsoft, the Center for Internet Security (CIS), the National Security Agency (NSA), the Defense Information Systems Agency (DISA), and the National Institute of Standards and Technology (NIST) have published "security configuration guidance" for Microsoft Windows.
The high security levels that are specified in some of these guides may significantly restrict functionality of a system. Therefore, you should perform significant testing before you deploy these recommendations. We recommend that you take additional precautions when you do the following:
Over the past several years, a number of organizations, including Microsoft, the Center for Internet Security (CIS), the National Security Agency (NSA), the Defense Information Systems Agency (DISA), and the National Institute of Standards and Technology (NIST), have published "security configuration guidance" for Windows. As with any security guidance, the additional security that is required frequently has an adverse effect on usability.
Several of these guides, including the guides from Microsoft, from CIS, and from NIST, contain multiple levels of security settings. These guides may include levels designed for the following:
Several groups worked with Microsoft to produce these security guides. In many cases, these guides all address similar threats. However, each guide differs slightly because of legal requirements, local policy, and functional requirements. Because of this, the settings may vary from one set of recommendations to the next. The "Organizations that produce publicly available security guidance" section contains a summary of each security guide.
Organizations that produce publicly available security guidance
Microsoft CorporationMicrosoft provides guidance for how to help secure our own operating systems. We have developed the following three levels of security settings:
We fully support our guides because of the extensive testing that we have conducted in our application compatibility laboratories on those guides. Visit the following Microsoft websites to download our guides:
Security configuration guidance for the Windows operating system, for Internet Explorer, and for the Office productivity suite is provided in Microsoft Security Compliance Manager: http://technet.microsoft.com/en-us/library/cc677002.aspx
The Center for Internet SecurityCIS has developed benchmarks to provide information that helps organizations make informed decisions about certain available security choices. CIS has provided three levels of security benchmarks:
Note CIS's guidance has changed since we originally published this article (November 3, 2004). CIS's current guidance resembles the guidance that Microsoft provides. For more information about the guidance that Microsoft provides, read the "Microsoft Corporation" section earlier in this article.
The National Institute of Standards and TechnologyNIST is responsible for creating security guidance for the United States Federal Government. NIST has created four levels of security guidance that are used by the United States Federal Agencies, private organizations, and public organizations:
Note NIST's guidance has changed since we originally published this article (November 3, 2004). NIST's current guidance resembles the guidance that Microsoft provides. For more information about the guidance that Microsoft provides, read the "Microsoft Corporation" section earlier in this article.
The Defense Information Systems AgencyDISA creates guidance specifically for use in the United States Department of Defense (DOD). United States DOD users who experience issues or have comments after they implement the DISA configuration guidance can provide feedback by sending an email message to email@example.com
Note DISA's guidance has changed since we originally published this article (November 3, 2004). DISA's current guidance is similar or identical to the guidance that Microsoft provides. For more information about the guidance that Microsoft provides, read the "Microsoft Corporation" section earlier in this article.
The National Security Agency (NSA)NSA has produced guidance to help secure high-risk computers in the United States Department of Defense (DOD). NSA has developed a single level of guidance that corresponds approximately with the High Security level that is produced by other organizations.
If you experience issues or have comments after you implement the NSA Security Guides for Windows XP, you can provide feedback by sending an email message to XPGuides@nsa.gov
(mailto:XPGuides@nsa.gov). To provide feedback on the Windows 2000 guides, send an email message to firstname.lastname@example.org
Note NSA's guidance has changed since we originally published this article (November 3, 2004). NSA's current guidance is similar or identical to the guidance that Microsoft provides. For more information about the guidance that Microsoft provides, read the "Microsoft Corporation" section earlier in this article.
Security guidance issuesAs mentioned earlier in this article, the high security levels that are described in some of these guides were designed to significantly restrict the functionality of a system. Because of this restriction, you should thoroughly test a system before you deploy these recommendations.
Note The security guidance that is provided for the SoHo, Legacy, or Enterprise levels has not been reported to severely affect system functionality. This Knowledge Base article is primarily focused on the guidance that is associated with the highest security level.
We strongly support industry efforts to provide security guidance for deployments in high security areas. We continue to work with security standards groups to develop useful hardening guidance that is fully tested. Security guidelines from third parties are always issued with strong warnings to fully test the guidelines in target high-security environments. However, these warnings are not always heeded. Make sure that you thoroughly test all security configurations in your target environment. Security settings that differ from those that we recommend may invalidate the application-compatibility testing that is performed as part of the operating system testing process. Additionally, we and third parties specifically discourage applying the draft guidance in a live production environment instead of in a test environment.
The high levels of these security guides include several settings that you should carefully evaluate before you implement them. Although these settings may provide additional security benefits, the settings may have an adverse effect on the usability of the system.
File system and registry access control list modificationsWindows XP and later versions of Windows have significantly tightened permissions throughout the system. Therefore, extensive changes to default permissions should not be necessary.
Additional discretionary access control list (DACL) changes may invalidate all or most of the application compatibility testing that is performed by Microsoft. Frequently, changes such as these have not undergone the thorough testing that Microsoft has performed on other settings. Support cases and field experience have shown that DACL edits change the fundamental behavior of the operating system, frequently in unintended ways. These changes affect application compatibility and stability and reduce functionality, with regard to both performance and capability.
Because of these changes, we do not recommend that you modify file system DACLs on files that are included with the operating system on production systems. We recommend that you evaluate any additional ACL changes against a known threat to understand any potential advantages that the changes may lend to a specific configuration. For these reasons, our guides make only very minimal DACL changes and only to Windows 2000. For Windows 2000, several minor changes are required. These changes are described in the Windows 2000 Security Hardening Guide.
Extensive permission changes that are propagated throughout the registry and file system cannot be undone. New folders, such as user profile folders that were not present at the original installation of the operating system, may be affected. Therefore, if you remove a Group Policy setting that performs DACL changes, or you apply the system defaults, you cannot roll back the original DACLs.
Changes to the DACL in the %SystemDrive% folder may cause the following scenarios:
For example, modifications to registry DACLs affect large parts of the registry hives and may cause systems to no longer function as expected. Modifying the DACLs on single registry keys poses less of a problem to many systems. However, we recommend that you carefully consider and test these changes before you implement them. Again, we can guarantee only that you can return to the recommended out-of-the-box settings if you reformat and reinstall the operating system.
Microsoft network client: Digitally sign communications (always)When you enable this setting, clients must sign Server Message Block (SMB) traffic when they contact servers that do not require SMB signing. This makes clients less vulnerable to session hijacking attacks. It provides significant value, but without enabling a similar change on the server to enable Microsoft network server: Digitally sign communications (always) or Microsoft network client: Digitally sign communications (if client agrees), the client will be unable to communicate successfully with the server.
Network security: Do not store LAN Manager hash value on next password changeWhen you enable this setting, the LAN Manager (LM) hash value for a new password will not be stored when the password is changed. The LM hash is relatively weak and prone to attack compared with the cryptographically stronger Microsoft Windows NT hash. Although this setting provides extensive additional security to a system by preventing many common password-cracking utilities, the setting can prevent some applications from starting or running correctly.
System cryptography: Use FIPS compliant algorithms for encryption, hashing, and signingWhen you enable this setting, Internet Information Services (IIS) and Microsoft Internet Explorer use only the Transport Layer Security (TLS) 1.0 protocol. If this setting is enabled on a server that is running IIS, only web browsers that support TLS 1.0 can connect. If this setting is enabled on a web client, the client can connect only to servers that support the TLS 1.0 protocol. This requirement may affect a client’s ability to visit websites that use Secure Sockets Layer (SSL). For more information, click the following article number to view the article in the Microsoft Knowledge Base:
(http://support.microsoft.com/kb/811834/ )Cannot visit SSL sites after you enable FIPS compliant cryptography
Additionally, when you enable this setting on a server that uses Terminal Services, clients are forced to use the RDP client 5.2 or later versions to connect.
For more information, click the following article number to view the article in the Microsoft Knowledge Base:
(http://support.microsoft.com/kb/811833/ )The effects of enabling the "System cryptography: Use FIPS compliant algorithms for encryption, hashing, and signing" security setting in Windows XP and in later versions of Windows
Automatic Update service or Background Intelligent Transfer Service (BITS) is disabledOne of the key pillars of the Microsoft security strategy is to make sure that systems are kept current on updates. A key component in this strategy is the Automatic Updates service. Both Windows Update and Software Update services use the Automatic Updates service. The Automatic Updates service relies on the Background Intelligent Transfer Service (BITS). If these services are disabled, the computers will no longer be able to receive updates from Windows Update through Automatic Updates, from Software Update services (SUS), or from some Microsoft Systems Management Server (SMS) installations. These services should be disabled only on systems that have an effective update-distribution system that does not rely on BITS.
NetLogon service is disabledIf you disable the NetLogon service, a workstation no longer functions reliably as a domain member. This setting may be appropriate for some computers that do not participate in domains. However, it should be carefully evaluated before deployment.
NoNameReleaseOnDemandThis setting prevents a server from relinquishing its NetBIOS name if it conflicts with another computer on the network. This setting is a good preventive measure for denial of service attacks against name servers and other very important server roles.
When you enable this setting on a workstation, the workstation refuses to relinquish its NetBIOS name even if the name conflicts with the name of a more important system, such as a domain controller. This scenario can disable important domain functionality. Microsoft strongly supports industry efforts to provide security guidance that is targeted to deployments in high security areas. However, this guidance must be thoroughly tested in the target environment. We highly recommend that system administrators who require additional security settings beyond the default settings use the Microsoft-issued guides as a starting point for their organization's requirements. For support or for questions about third-party guides, contact the organization that issued the guidance.
For more information about security settings, see Threats and Countermeasures: Security Settings in Windows Server 2003 and Windows XP. To download this guide, visit the following Microsoft website:
http://go.microsoft.com/fwlink/?LinkId=15159For more information about the effect of some additional key security settings, click the following article number to view the article in the Microsoft Knowledge Base:
823659For more information about the effects of requiring FIPS compliant algorithms, click the following article number to view the article in the Microsoft Knowledge Base:
(http://support.microsoft.com/kb/823659/ )Client, service, and program incompatibilities that may occur when you modify security settings and user rights assignments
811833Microsoft provides third-party contact information to help you find technical support. This contact information may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.
(http://support.microsoft.com/kb/811833/ )The effects of enabling the "System cryptography: Use FIPS compliant algorithms for encryption, hashing, and signing" security setting in Windows XP and later versions
For information about your hardware manufacturer, visit the following Microsoft website:
Article ID: 885409 - Last Review: October 14, 2010 - Revision: 9.0
Contact us for more help
Connect with Answer Desk for expert help.