Applies ToMicrosoft Dynamics NAV 2009 R2 Dynamics NAV 2009 Service Pack 1

توضح هذه المقالة مشكلة عند طباعة تقارير "استلام المخزون" لم تتم فوترتها و "شحن مخزون" لم تتم فوترتها في ترجمة المملكة المتحدة Microsoft Dynamics NAV 2009. استمرار حدوث هذه المشكلة بعد تطبيق قاعدة المعارف 2882942.اتبع الخطوات الموجودة في المقطع تغييرات التعليمات البرمجية لحل هذه المشكلة. تحدث هذه المشكلة في المنتجات التالية:

  • ترجمة المملكة المتحدة Microsoft Dynamics NAV 2009 R2

  • ترجمة المملكة المتحدة Microsoft Dynamics NAV 2009 Service Pack 1 (SP1)

الحل

معلومات الإصلاح العاجل

الآن يتوفر إصلاح عاجل معتمد من Microsoft. ومع ذلك، هو فقط لتصحيح المشكلة الموضحة في هذه المقالة. تطبيقها فقط على الأنظمة التي تواجه هذه المشكلة بالتحديد. قد يتم إجراء اختبارات إضافية على هذا الإصلاح العاجل. ولذلك، إذا لم يكن تأثير المشكلة كبيرا، نوصي بالانتظار حتى الإصدار التالي من حزمة الخدمة Microsoft Dynamics NAV 2009 أو الإصدار Microsoft Dynamics التنقل التالي الذي يحتوي على هذا الإصلاح العاجل.ملاحظة: في بعض الحالات، يحدد المصروفات التي تحتسب عادة لدعم قد يتم إلغاء المكالمات إذا "أخصائي الدعم التقني" ل Microsoft Dynamics والمنتجات ذات الصلة أن تحديثًا معيناً سوف يعمل على حل المشكلة. سيتم اضافة تكاليف الدعم المعتادة على أسئلة الدعم الإضافية والمشاكل التي لا يأهل على حلها للتحديث المطلوب.

معلومات التثبيت

تقدم Microsoft أمثلة برمجية للتوضيح فقط، دون أي ضمان صريح أو ضمني. هذا يتضمن، على سبيل المثال لا الحصر، الضمانات الضمنية الخاصة بالتسويق أو الملاءمة لغرض معين. تفترض هذه المقالة أنك معتاد على لغة البرمجة التي يتم شرحها والأدوات المستخدمة لإنشاء الإجراءات وتصحيحها. يساعد مهندسو الدعم لدى Microsoft شرح وظيفة إجراء محدد. ومع ذلك، لن يقوموا بتعديل هذه الأمثلة لتقديم وظيفة إضافية أو إنشاء إجراءات تستوفي متطلبات محددة.ملاحظة: قبل تثبيت هذا الإصلاح العاجل، تأكد من تسجيل خروج النظام كافة المستخدمين عميل Microsoft Dynamics التنقل. ويشمل ذلك خدمات Microsoft Dynamics NAV تطبيق الملقم (NAS). يجب أن يكون عميل فقط المستخدم الذي تم تسجيل دخوله عند تطبيق هذا الإصلاح العاجل.لتطبيق هذا الإصلاح العاجل، يجب أن يكون لديك ترخيص مطور.نوصي بأن تعيين حساب المستخدم في إطار عمليات تسجيل دخول Windows أو في إطار "قاعدة بيانات تسجيل الدخول" بمعرف دور "رئيسي". إذا كان حساب المستخدم لا يمكن تعيين معرف دور "سوبر"، يجب التحقق من أن حساب المستخدم يملك الأذونات التالية:

  • إذن "تعديل" للكائن الذي سيتم تغيير.

  • إذن Execute للكائن 5210 معرف كائن النظام و نظام 9015 معرف الكائنالكائن.

ملاحظة: ليس لديك حق لمخازن البيانات ما لم يكن لديك لإجراء إصلاح البيانات.

تغييرات التعليمات البرمجية

ملاحظة: دوماً التعليمات البرمجية للاختبار إصلاح في بيئة تسيطر عليها قبل تطبيق إصلاحات لأجهزة الكمبيوتر الإنتاج.لحل هذه المشكلة، اتبع الخطوات التالية.

  1. تغيير التعليمات البرمجية في "بيانات العنصر رقم 1 المقاطع" في "استلام المخزون" لم تتم فوترتها التقرير (10540) كما يلي:التعليمات البرمجية الموجودة 1

    ...VertAlign=Bottom;                                                           FontBold=Yes;                                                           MultiLine=Yes;                                                           DataSetFieldName=Item_Ledger_Entry__Cost_Amount__Expected__Caption }              { 1040042;Label     ;5700 ;0    ;1550 ;846  ;ParentControl=1040040;                                                           VertAlign=Bottom;...

    استبدال رمز 1

    ...VertAlign=Bottom;                                                           FontBold=Yes;                                                           MultiLine=Yes;// Adding the following line.                                                          CaptionML=ENU=Cost Amount (Expected);// End of the added line.                                                           DataSetFieldName=Item_Ledger_Entry__Cost_Amount__Expected__Caption }              { 1040042;Label     ;5700 ;0    ;1550 ;846  ;ParentControl=1040040;                                                           VertAlign=Bottom;...

    التعليمات البرمجية الموجودة 2

    ...SourceExpr="Value Entry"."Invoiced Quantity";                                                           DataSetFieldName=Item_Ledger_Entry___Invoiced_Quantity_ }              { 1040039;TextBox   ;13050;0    ;1800 ;423  ;FontBold=Yes;// Deleting the following line.                                                          SourceExpr="Item Ledger Entry"."Cost Amount (Expected)";// End of the deleted line.                                                           DataSetFieldName=Item_Ledger_Entry___Cost_Amount__Expected__ }              { 1040045;TextBox   ;0    ;0    ;5400 ;423  ;FontBold=Yes;                                                           SourceExpr=Text1040005 + ' ' + Item."No.";...

    استبدال رمز 2

    ...SourceExpr="Value Entry"."Invoiced Quantity";                                                           DataSetFieldName=Item_Ledger_Entry___Invoiced_Quantity_ }              { 1040039;TextBox   ;13050;0    ;1800 ;423  ;FontBold=Yes;// Adding the following line.                                                          SourceExpr=ItemCostAmtExpected;// End of the added line.                                                           DataSetFieldName=Item_Ledger_Entry___Cost_Amount__Expected__ }              { 1040045;TextBox   ;0    ;0    ;5400 ;423  ;FontBold=Yes;                                                           SourceExpr=Text1040005 + ' ' + Item."No.";...

    التعليمات البرمجية الموجودة 3

    ...DataSetFieldName=Value_Entry___Cost_Amount__Actual__ }              { 1040059;TextBox   ;7350 ;0    ;1550 ;423  ;FontBold=Yes;                                                           CaptionML=ENU=Rec. not invoiced;// Deleting the following line.                                                          SourceExpr="Item Ledger Entry"."Cost Amount (Expected)" - "Value Entry"."Cost Amount (Actual)";// End of the deleted line.                                                           DataSetFieldName=Item_Ledger_Entry___Cost_Amount__Expected______Value_Entry___Cost_Amount__Actual__ }              { 1040064;TextBox   ;15000;0    ;1500 ;423  ;FontBold=Yes;                                                           SourceExpr="Value Entry"."Invoiced Quantity";...

    استبدال رمز 3

    ...DataSetFieldName=Value_Entry___Cost_Amount__Actual__ }              { 1040059;TextBox   ;7350 ;0    ;1550 ;423  ;FontBold=Yes;                                                           CaptionML=ENU=Rec. not invoiced;// Adding the following line.                                                          SourceExpr=ItemCostAmtExpected - ValueCostAmtActual;// End of the added line.                                                           DataSetFieldName=Item_Ledger_Entry___Cost_Amount__Expected______Value_Entry___Cost_Amount__Actual__ }              { 1040064;TextBox   ;15000;0    ;1500 ;423  ;FontBold=Yes;                                                           SourceExpr="Value Entry"."Invoiced Quantity";...

    التعليمات البرمجية الموجودة 4

    ...DataSetFieldName=Item_Ledger_Entry___Invoiced_Quantity__Control1040067 }              { 1040068;TextBox   ;13050;423  ;1800 ;423  ;FontSize=7;                                                           FontBold=Yes;// Deleting the following lines.                                                          SourceExpr="Item Ledger Entry"."Cost Amount (Expected)";                                                          DataSetFieldName=Item_Ledger_Entry___Cost_Amount__Expected___Control1040068 }             { 1040069;TextBox   ;7350 ;423  ;1550 ;423  ;FontSize=7;                                                          FontBold=Yes;                                                          CaptionML=ENU=Rec. not invoiced;                                                          SourceExpr="Item Ledger Entry"."Cost Amount (Expected)" - "Value Entry"."Cost Amount (Actual)";// End of the deleted lines.                                                           DataSetFieldName=Item_Ledger_Entry___Cost_Amount__Expected______Value_Entry___Cost_Amount__Actual___Control1040069 }              { 1040070;TextBox   ;15000;423  ;1500 ;423  ;FontSize=7;                                                           FontBold=Yes;...

    استبدال رمز 4

    ...DataSetFieldName=Item_Ledger_Entry___Invoiced_Quantity__Control1040067 }              { 1040068;TextBox   ;13050;423  ;1800 ;423  ;FontSize=7;                                                           FontBold=Yes;// Adding the following lines.                                                          SourceExpr=ItemCostAmtExpectedTotal }             { 1040069;TextBox   ;7350 ;423  ;1550 ;423  ;FontSize=7;                                                          FontBold=Yes;                                                          CaptionML=ENU=Rec. not invoiced;                                                          SourceExpr=ItemCostAmtExpectedTotal - ValueCostAmtActualTotal;// End of the added lines.                                                           DataSetFieldName=Item_Ledger_Entry___Cost_Amount__Expected______Value_Entry___Cost_Amount__Actual___Control1040069 }              { 1040070;TextBox   ;15000;423  ;1500 ;423  ;FontSize=7;                                                           FontBold=Yes;...

    التعليمات البرمجية الموجودة 5

    ...ForeColor=65535;                                                           SourceExpr=ItemInvoicedQtyTotal;                                                           DataSetFieldName=ItemInvoicedQtyTotal }// Delete the following lines.             { 1040103;TextBox   ;300  ;0    ;150  ;423  ;Name=ItemCostAmtExpectedTotal;                                                          Visible=No;                                                          ForeColor=65535;                                                          SourceExpr=ItemCostAmtExpectedTotal;                                                          DataSetFieldName=ItemCostAmtExpectedTotal }// End of the deleted lines.              { 1040104;TextBox   ;0    ;0    ;150  ;423  ;Name=ItemReceivedQtyTotal;                                                           Visible=No;                                                           ForeColor=65535;...

    استبدال رمز 5

    ...ForeColor=65535;                                                           SourceExpr=ItemInvoicedQtyTotal;                                                           DataSetFieldName=ItemInvoicedQtyTotal }              { 1040104;TextBox   ;0    ;0    ;150  ;423  ;Name=ItemReceivedQtyTotal;                                                           Visible=No;                                                           ForeColor=65535;...
  2. تغيير التعليمات البرمجية في "بيانات العنصر رقم 2 المقاطع" في "استلام المخزون" لم تتم فوترتها التقرير (10540) كما يلي:التعليمات البرمجية الموجودة 1

    ...NoOfItems := NoOfItems + 1;                             CurrReport.CREATETOTALS(Quantity,"Invoiced Quantity","Cost Amount (Expected)");                             CurrReport.CREATETOTALS("Value Entry"."Cost Amount (Actual)","Value Entry"."Invoiced Quantity");// Delete the following lines.                            // GB1004.begin                            ItemReceivedQty += Quantity;                            ItemInvoicedQty += "Invoiced Quantity";                            ItemCostAmtExpected += "Cost Amount (Expected)";                            ItemReceivedQtyTotal += Quantity;                            ItemInvoicedQtyTotal += "Invoiced Quantity";                            ItemCostAmtExpectedTotal += "Cost Amount (Expected)";// End of the deleted lines.                             // GB1004.end                           END;...

    استبدال رمز 1

    ...NoOfItems := NoOfItems + 1;                             CurrReport.CREATETOTALS(Quantity,"Invoiced Quantity","Cost Amount (Expected)");                             CurrReport.CREATETOTALS("Value Entry"."Cost Amount (Actual)","Value Entry"."Invoiced Quantity");// Add the following lines.                            CALCFIELDS("Cost Amount (Actual)");                            CALCFIELDS("Cost Amount (Expected)");                            // GB1004.begin                            ItemReceivedQty += Quantity;                            ItemInvoicedQty += "Invoiced Quantity";                            ItemCostAmtExpected += "Cost Amount (Expected)" + "Cost Amount (Actual)";                            ItemReceivedQtyTotal += Quantity;                            ItemInvoicedQtyTotal += "Invoiced Quantity";                            ItemCostAmtExpectedTotal += "Cost Amount (Expected)" + "Cost Amount (Actual)";// End of the added lines.                             // GB1004.end                           END;...

    التعليمات البرمجية الموجودة 2

    ...{ 1040047;TextBox   ;2100 ;0    ;1500 ;423  ;HorzAlign=Left;                                                           SourceExpr="Source No.";                                                           DataSetFieldName=Item_Ledger_Entry__Source_No__ }// Delete the following line.             { 1040030;TextBox   ;13050;0    ;1800 ;423  ;SourceExpr="Cost Amount (Expected)";// End of the deleted line.                                                           DataSetFieldName=Item_Ledger_Entry__Cost_Amount__Expected__ }            }             }...

    استبدال رمز 2

    ...{ 1040047;TextBox   ;2100 ;0    ;1500 ;423  ;HorzAlign=Left;                                                           SourceExpr="Source No.";                                                           DataSetFieldName=Item_Ledger_Entry__Source_No__ }// Add the following line.             { 1040030;TextBox   ;13050;0    ;1800 ;423  ;SourceExpr="Cost Amount (Expected)" + "Cost Amount (Actual)";// End of the added line.                                                           DataSetFieldName=Item_Ledger_Entry__Cost_Amount__Expected__ }            }             }...

    التعليمات البرمجية الموجودة 3

    ...SourceExpr="Value Entry"."Invoiced Quantity";                                                           DataSetFieldName=Item_Ledger_Entry__Item_Ledger_Entry___Invoiced_Quantity_ }              { 1040076;TextBox   ;13050;0    ;1800 ;423  ;FontBold=Yes;// Delete the following line.                                                         SourceExpr="Item Ledger Entry"."Cost Amount (Expected)";// End of the deleted line.                                                           DataSetFieldName=Item_Ledger_Entry__Item_Ledger_Entry___Cost_Amount__Expected__ }              { 1040079;TextBox   ;0    ;0    ;5400 ;423  ;FontBold=Yes;                                                           SourceExpr=Text1040005 + ' ' + Item."No.";...

    استبدال رمز 3

    ...SourceExpr="Value Entry"."Invoiced Quantity";                                                           DataSetFieldName=Item_Ledger_Entry__Item_Ledger_Entry___Invoiced_Quantity_ }              { 1040076;TextBox   ;13050;0    ;1800 ;423  ;FontBold=Yes;// Add the following line.                                                          SourceExpr=ItemCostAmtExpected;// End of the added line.                                                           DataSetFieldName=Item_Ledger_Entry__Item_Ledger_Entry___Cost_Amount__Expected__ }              { 1040079;TextBox   ;0    ;0    ;5400 ;423  ;FontBold=Yes;                                                           SourceExpr=Text1040005 + ' ' + Item."No.";...

    التعليمات البرمجية الموجودة 4

    ...DataSetFieldName=Item_Ledger_Entry__Quantity____Item_Ledger_Entry___Invoiced_Quantity__Control1040080 }              { 1040081;TextBox   ;7350 ;0    ;1550 ;423  ;FontBold=Yes;                                                           CaptionML=ENU=Cost;// Delete the following line.                                                          SourceExpr="Item Ledger Entry"."Cost Amount (Expected)" - "Value Entry"."Cost Amount (Actual)";// End of the deleted line.                                                           DataSetFieldName=Item_Ledger_Entry___Cost_Amount__Expected______Value_Entry___Cost_Amount__Actual___Control1040081 }              { 1040078;TextBox   ;18000;0    ;150  ;423  ;Name=NoOfItems;                                                           Visible=No;...

    استبدال رمز 4

    ...DataSetFieldName=Item_Ledger_Entry__Quantity____Item_Ledger_Entry___Invoiced_Quantity__Control1040080 }              { 1040081;TextBox   ;7350 ;0    ;1550 ;423  ;FontBold=Yes;                                                           CaptionML=ENU=Cost;// Add the following line.                                                          SourceExpr=ItemCostAmtExpected - ValueCostAmtActual;// End of the added line.                                                           DataSetFieldName=Item_Ledger_Entry___Cost_Amount__Expected______Value_Entry___Cost_Amount__Actual___Control1040081 }              { 1040078;TextBox   ;18000;0    ;150  ;423  ;Name=NoOfItems;                                                           Visible=No;...
  3. تغيير التعليمات البرمجية في "بيانات العنصر رقم 3 المقاطع" في "استلام المخزون" لم تتم فوترتها التقرير (10540) كما يلي:التعليمات البرمجية الموجودة 1

    ...OnPreDataItem=BEGIN                          IF EndDate <> 0D THEN                            SETRANGE("Posting Date",0D,EndDate);// Delete the following line.                         SETFILTER("Invoiced Quantity",'<>%1',0);                         CurrReport.CREATETOTALS("Cost Amount (Actual)","Invoiced Quantity");// End of the deleted line.                        END;          OnAfterGetRecord=BEGIN...

    استبدال رمز 1

    ...OnPreDataItem=BEGIN                          IF EndDate <> 0D THEN                            SETRANGE("Posting Date",0D,EndDate);// Add the following lines.                         CurrReport.CREATETOTALS("Cost Amount (Actual)","Invoiced Quantity");                         LastDocumentNo := '';// End of the added lines.                        END;          OnAfterGetRecord=BEGIN...

    التعليمات البرمجية الموجودة 2

    ...ValueInvoicedQty += "Invoiced Quantity";                             ValueCostAmtActualTotal += "Cost Amount (Actual)";                             ValueInvoicedQtyTotal += "Invoiced Quantity";                             // GB1004.end                           END;...

    استبدال رمز 2

    ...ValueInvoicedQty += "Invoiced Quantity";                             ValueCostAmtActualTotal += "Cost Amount (Actual)";                             ValueInvoicedQtyTotal += "Invoiced Quantity";// Add the following line.                            CalcSumDocumentNo("Value Entry");// End of the added line.                             // GB1004.end                           END;...

    التعليمات البرمجية الموجودة 3

    ...SectionWidth=18150;              SectionHeight=423;              OnPreSection=BEGIN// Delete the following line.                            CurrReport.SHOWOUTPUT(PrintDetails);// End of the deleted line.                           END;            }...

    استبدال رمز 3

    ...SectionWidth=18150;              SectionHeight=423;              OnPreSection=BEGIN// Add the following line.                            CurrReport.SHOWOUTPUT(PrintDetails AND ("Invoiced Quantity" <> 0));// End of the added line.                           END;            }...
  4. تغيير التعليمات البرمجية في "المتغيرات العمومية" في "استلام المخزون" لم تتم فوترتها التقرير (10540) كما يلي:التعليمات البرمجية الموجودة

    ...</TableCell>                </TableCells>                <Visibility>// Delete the following line.                 <Hidden>=iif (Fields!PrintDetails.Value and Fields!Value_Entry_Entry_No_.Value > 0,FALSE,TRUE)</Hidden>// End of the deleted line.                </Visibility>              </TableRow>            </TableRows>...

    استبدال التعليمات البرمجية

    ...</TableCell>                </TableCells>                <Visibility>// Adding the following line.                 <Hidden>=iif (Fields!PrintDetails.Value and Fields!Value_Entry_Entry_No_.Value and Fields!Value_Entry__Invoiced_Quantity_.Value <> 0,FALSE,TRUE)</Hidden>// End of the added line.                </Visibility>              </TableRow>            </TableRows>...
  5. تغيير التعليمات البرمجية في "بيانات العنصر رقم 1 المقاطع" في "شحنة المخزون" لم تتم فوترتها التقرير (10541) كما يلي:التعليمات البرمجية الموجودة 1

    ...VertAlign=Bottom;                                                           FontBold=Yes;                                                           MultiLine=Yes;                                                           DataSetFieldName=Value_Entry__Cost_Amount__Actual__Caption }              { 1040026;Label     ;15000;846  ;1500 ;846  ;ParentControl=1040025;                                                           HorzAlign=Right;...

    استبدال رمز 1

    ...VertAlign=Bottom;                                                           FontBold=Yes;                                                           MultiLine=Yes;// Add the following line.                                                          CaptionML=ENU=Cost Amount (Actual);// End of the added line.                                                           DataSetFieldName=Value_Entry__Cost_Amount__Actual__Caption }              { 1040026;Label     ;15000;846  ;1500 ;846  ;ParentControl=1040025;                                                           HorzAlign=Right;...

    التعليمات البرمجية الموجودة 2

    ...VertAlign=Bottom;                                                           FontBold=Yes;                                                           MultiLine=Yes;                                                           DataSetFieldName=Item_Ledger_Entry__Cost_Amount__Expected__Caption }              { 1040042;Label     ;5700 ;0    ;1550 ;846  ;ParentControl=1040040;                                                           VertAlign=Bottom;...

    استبدال رمز 2

    ...VertAlign=Bottom;                                                           FontBold=Yes;                                                           MultiLine=Yes;// Add the following line.                                                          CaptionML=ENU=Cost Amount (Expected);// End of the added line.                                                           DataSetFieldName=Item_Ledger_Entry__Cost_Amount__Expected__Caption }              { 1040042;Label     ;5700 ;0    ;1550 ;846  ;ParentControl=1040040;                                                           VertAlign=Bottom;...

    التعليمات البرمجية الموجودة 3

    ...SourceExpr=Text1040005 + ' ' + Item."No.";                                                           DataSetFieldName=Text1040005_________Item__No__ }              { 1040054;TextBox   ;16650;0    ;1500 ;423  ;FontBold=Yes;// Delete the following line.                                                          SourceExpr="Value Entry"."Cost Amount (Actual)";// End of the deleted line.                                                           DataSetFieldName=Value_Entry___Cost_Amount__Actual__ }              { 1040059;TextBox   ;7350 ;0    ;1550 ;423  ;FontBold=Yes;                                                           CaptionML=ENU=Rec. not invoiced;...

    استبدال رمز 3

    ...SourceExpr=Text1040005 + ' ' + Item."No.";                                                           DataSetFieldName=Text1040005_________Item__No__ }              { 1040054;TextBox   ;16650;0    ;1500 ;423  ;FontBold=Yes;// Add the following line.                                                          SourceExpr=-"Value Entry"."Cost Amount (Actual)";// End of the added line.                                                           DataSetFieldName=Value_Entry___Cost_Amount__Actual__ }              { 1040059;TextBox   ;7350 ;0    ;1550 ;423  ;FontBold=Yes;                                                           CaptionML=ENU=Rec. not invoiced;...

    التعليمات البرمجية الموجودة 4

    ...DataSetFieldName=Value_Entry___Invoiced_Quantity__Control1040070 }              { 1040071;TextBox   ;16650;423  ;1500 ;423  ;FontSize=7;                                                           FontBold=Yes;// Delete the following line.                                                          SourceExpr="Value Entry"."Cost Amount (Actual)";// End of the deleted line.                                                           DataSetFieldName=Value_Entry___Cost_Amount__Actual___Control1040071 }              { 1040072;Label     ;0    ;423  ;5550 ;423  ;FontSize=9;                                                           FontBold=Yes;...

    استبدال رمز 4

    ...DataSetFieldName=Value_Entry___Invoiced_Quantity__Control1040070 }              { 1040071;TextBox   ;16650;423  ;1500 ;423  ;FontSize=7;                                                           FontBold=Yes;// Add the following line.                                                          SourceExpr=-"Value Entry"."Cost Amount (Actual)";// End of the added line.                                                           DataSetFieldName=Value_Entry___Cost_Amount__Actual___Control1040071 }              { 1040072;Label     ;0    ;423  ;5550 ;423  ;FontSize=9;                                                           FontBold=Yes;...
  6. تغيير التعليمات البرمجية في بيانات العنصر رقم 2 في "شحنة المخزون" لم تتم فوترتها التقرير (10541) كما يلي:التعليمات البرمجية الموجودة 1

    ...OnAfterGetRecord=BEGIN                             NoOfItems := NoOfItems + 1;                             CurrReport.CREATETOTALS("Value Entry"."Cost Amount (Actual)","Value Entry"."Invoiced Quantity");// Delete the following lines.                            ItemCostAmount += "Cost Amount (Expected)";                            ItemShippedQty += -Quantity;                            ItemInvoicedQty += -"Invoiced Quantity";                            ItemCostAmtExpected += "Cost Amount (Expected)";                            ItemCostAmountTotal += "Cost Amount (Expected)";                            ItemShippedQtyTotal += -Quantity;                            ItemInvoicedQtyTotal += -"Invoiced Quantity";                            ItemCostAmtExpectedTotal += "Cost Amount (Expected)";// End of the deleted lines.                           END;          DataItemLink=Item No.=FIELD(No.);...

    استبدال رمز 1

    ...OnAfterGetRecord=BEGIN                             NoOfItems := NoOfItems + 1;                             CurrReport.CREATETOTALS("Value Entry"."Cost Amount (Actual)","Value Entry"."Invoiced Quantity");// Add the following lines.                            CALCFIELDS("Cost Amount (Actual)");                            CALCFIELDS("Cost Amount (Expected)");                            ItemCostAmount -= ("Cost Amount (Expected)" + "Cost Amount (Actual)");                            ItemShippedQty -= Quantity;                            ItemInvoicedQty -= "Invoiced Quantity";                            ItemCostAmtExpected -= ("Cost Amount (Expected)" + "Cost Amount (Actual)");                            ItemCostAmountTotal -= ("Cost Amount (Expected)" + "Cost Amount (Actual)");                            ItemShippedQtyTotal -= Quantity;                            ItemInvoicedQtyTotal -= "Invoiced Quantity";                            ItemCostAmtExpectedTotal -= ("Cost Amount (Expected)" + "Cost Amount (Actual)");// End of the added lines.                           END;          DataItemLink=Item No.=FIELD(No.);...

    التعليمات البرمجية الموجودة 2

    ...{ 1040047;TextBox   ;2100 ;0    ;1500 ;423  ;HorzAlign=Left;                                                           SourceExpr="Source No.";                                                           DataSetFieldName=Item_Ledger_Entry__Source_No__ }// Delete the following line.             { 1040030;TextBox   ;13050;0    ;1800 ;423  ;SourceExpr="Cost Amount (Expected)";// End of the deleted line.                                                           DataSetFieldName=Item_Ledger_Entry__Cost_Amount__Expected__ }              { 1040082;TextBox   ;18000;0    ;150  ;423  ;Name="Entry No.";                                                           Visible=No;...

    استبدال رمز 2

    ...{ 1040047;TextBox   ;2100 ;0    ;1500 ;423  ;HorzAlign=Left;                                                           SourceExpr="Source No.";                                                           DataSetFieldName=Item_Ledger_Entry__Source_No__ }// Add the following line.             { 1040030;TextBox   ;13050;0    ;1800 ;423  ;SourceExpr=-("Cost Amount (Expected)" + "Cost Amount (Actual)");// End of the added line.                                                           DataSetFieldName=Item_Ledger_Entry__Cost_Amount__Expected__ }              { 1040082;TextBox   ;18000;0    ;150  ;423  ;Name="Entry No.";                                                           Visible=No;...
  7. تغيير التعليمات البرمجية في بيانات العنصر رقم 3 في "شحنة المخزون" لم تتم فوترتها التقرير (10541) كما يلي:التعليمات البرمجية الموجودة 1

    ...OnPreDataItem=BEGIN                          IF EndDate <> 0D THEN                            SETRANGE("Posting Date",0D,EndDate);// Delete the following lines.                         SETFILTER("Invoiced Quantity",'<>%1',0);                         CurrReport.CREATETOTALS("Cost Amount (Actual)","Invoiced Quantity");                       END;         OnAfterGetRecord=BEGIN                            ValueInvoicedQty += -"Invoiced Quantity";                            ValueCostAmtActual += "Cost Amount (Actual)";                            ValueInvoicedQtyTotal += -"Invoiced Quantity";                            ValueCostAmtActualTotal += "Cost Amount (Actual)";// End of the deleted lines.                           END;          DataItemLink=Item Ledger Entry No.=FIELD(Entry No.);...

    استبدال رمز 1

    ...OnPreDataItem=BEGIN                          IF EndDate <> 0D THEN                            SETRANGE("Posting Date",0D,EndDate);// Add the following lines.                         CurrReport.CREATETOTALS("Cost Amount (Actual)","Invoiced Quantity");                         LastDocumentNo := '';                       END;         OnAfterGetRecord=BEGIN                            ValueInvoicedQty -= "Invoiced Quantity";                            ValueCostAmtActual -= "Cost Amount (Actual)";                            ValueInvoicedQtyTotal -= "Invoiced Quantity";                            ValueCostAmtActualTotal -= "Cost Amount (Actual)";                            CalcSumDocumentNo("Value Entry");// End of the added lines.                           END;          DataItemLink=Item Ledger Entry No.=FIELD(Entry No.);...

    التعليمات البرمجية الموجودة 3

    ...SectionWidth=18150;              SectionHeight=423;              OnPreSection=BEGIN// Delete the following line.                            CurrReport.SHOWOUTPUT(PrintDetails);// End of the deleted line.                           END;            }...

    استبدال رمز 3

    ...SectionWidth=18150;              SectionHeight=423;              OnPreSection=BEGIN// Add the following line.                            CurrReport.SHOWOUTPUT(PrintDetails AND ("Invoiced Quantity" <> 0));// End of the added line.                           END;            }...

    التعليمات البرمجية الموجودة 4

    ...{ 1040025;TextBox   ;15000;0    ;1500 ;423  ;CaptionML=ENU=Invoiced Quantity;                                                           SourceExpr=-"Invoiced Quantity";                                                           DataSetFieldName=Value_Entry__Invoiced_Quantity_ }// Delete the following line.             { 1040027;TextBox   ;16650;0    ;1500 ;423  ;SourceExpr="Cost Amount (Actual)";// End of the deleted line.                                                           DataSetFieldName=Value_Entry__Cost_Amount__Actual__ }            }             }...

    استبدال رمز 4

    ...{ 1040025;TextBox   ;15000;0    ;1500 ;423  ;CaptionML=ENU=Invoiced Quantity;                                                           SourceExpr=-"Invoiced Quantity";                                                           DataSetFieldName=Value_Entry__Invoiced_Quantity_ }// Add the following line.             { 1040027;TextBox   ;16650;0    ;1500 ;423  ;SourceExpr=-"Cost Amount (Actual)";// End of the added line.                                                           DataSetFieldName=Value_Entry__Cost_Amount__Actual__ }            }             }...
  8. تغيير التعليمات البرمجية في بيانات البند رقم 4 في "شحنة المخزون" لم تتم فوترتها التقرير (10541) كما يلي:التعليمات البرمجية الموجودة

    ...SourceExpr=-"Value Entry"."Invoiced Quantity";                                                           DataSetFieldName=Value_Entry___Invoiced_Quantity__Control1040036 }              { 1040044;TextBox   ;16650;0    ;1500 ;423  ;FontBold=Yes;// Delete the following line.                                                          SourceExpr="Value Entry"."Cost Amount (Actual)";// End of the deleted line.                                                           DataSetFieldName=Value_Entry___Cost_Amount__Actual___Control1040044 }              { 1040029;TextBox   ;0    ;0    ;5400 ;423  ;FontBold=Yes;                                                           SourceExpr=Text1040005 + ' ' + Item."No.";...

    استبدال التعليمات البرمجية

    ...SourceExpr=-"Value Entry"."Invoiced Quantity";                                                           DataSetFieldName=Value_Entry___Invoiced_Quantity__Control1040036 }              { 1040044;TextBox   ;16650;0    ;1500 ;423  ;FontBold=Yes;// Add the following line.                                                          SourceExpr=-"Value Entry"."Cost Amount (Actual)";// End of the added line.                                                           DataSetFieldName=Value_Entry___Cost_Amount__Actual___Control1040044 }              { 1040029;TextBox   ;0    ;0    ;5400 ;423  ;FontBold=Yes;                                                           SourceExpr=Text1040005 + ' ' + Item."No.";...
  9. تغيير التعليمات البرمجية في "المتغيرات العمومية" في "شحنة المخزون" لم تتم فوترتها التقرير (10541) كما يلي:التعليمات البرمجية الموجودة 1

    ...ItemCostAmtExpectedTotal@1040016 : Decimal;        ValueInvoicedQtyTotal@1040019 : Decimal;        ValueCostAmtActualTotal@1040020 : Decimal;      BEGIN      {...

    استبدال رمز 1

    ...ItemCostAmtExpectedTotal@1040016 : Decimal;        ValueInvoicedQtyTotal@1040019 : Decimal;        ValueCostAmtActualTotal@1040020 : Decimal;// Add the following lines.       LastDocumentNo@1040023 : Code[20];     LOCAL PROCEDURE CalcSumDocumentNo@1040000(VAR ValueEntry@1040000 : Record 5802);     VAR       ValueEntry1@1040001 : Record 5802;       ValueCostAmtActualPer@1040002 : Decimal;       ValueIncoicedQtyPer@1040003 : Decimal;     BEGIN       IF LastDocumentNo = ValueEntry."Document No." THEN BEGIN         ValueEntry."Cost Amount (Actual)" := 0;         ValueEntry."Invoiced Quantity" := 0;       END ELSE BEGIN         WITH ValueEntry1 DO BEGIN           COPYFILTERS(ValueEntry);           SETRANGE("Document No.",ValueEntry."Document No.");           IF FINDSET THEN             REPEAT               ValueCostAmtActualPer += "Cost Amount (Actual)";               ValueIncoicedQtyPer += "Invoiced Quantity";             UNTIL NEXT = 0;         END;         ValueEntry."Cost Amount (Actual)" := ValueCostAmtActualPer;         ValueEntry."Invoiced Quantity" := ValueIncoicedQtyPer;         LastDocumentNo := ValueEntry."Document No.";       END;     END;// End of the added lines.      BEGIN      {...

    التعليمات البرمجية الموجودة 2

    ...</TableCell>                </TableCells>                <Visibility>// Delete the following line.                 <Hidden>=IIF(First(Fields!PrintDetails.Value) And (Fields!Value_Entry__Document_No__.Value<>""),False,True)</Hidden>// End of the deleted line.                </Visibility>              </TableRow>            </TableRows>...

    استبدال رمز 2

    ...</TableCell>                </TableCells>                <Visibility>// Add the following line.                 <Hidden>=IIF(First(Fields!PrintDetails.Value) And (Fields!Value_Entry__Document_No__.Value<>"") And (Fields!Value_Entry__Invoiced_Quantity_.Value <>0),False,True)</Hidden>// End of the added line.                </Visibility>              </TableRow>            </TableRows>...

المتطلبات الأساسية

يجب عليك ترجمة المملكة المتحدة Microsoft Dynamics NAV 2009 R2 أو حزمة الخدمة SP1 مثبتة لتطبيق هذا الإصلاح العاجل.

معلومات الإزالة

لا يمكنك إزالة هذا الإصلاح العاجل.

الحالة

أقرت Microsoft أن هذه مشكلة في منتجات Microsoft المسردة في قسم "ينطبق على".

ملاحظة: وهذا المقال "النشر السريع" التي تم إنشاؤها مباشرة من داخل مؤسسة دعم Microsoft. وتقدم المعلومات الواردة في هذه الوثيقة كاستجابه للمسائل الناشئة. نتيجة للسرعة في توفيره، قد تتضمن الأخطاء المطبعية المواد ويمكن مراجعة في أي وقت دون سابق إنذار. راجع شروط الاستخداملاعتبارات أخرى.

هل تحتاج إلى مزيد من المساعدة؟

الخروج من الخيارات إضافية؟

استكشف مزايا الاشتراك، واستعرض الدورات التدريبية، وتعرف على كيفية تأمين جهازك، والمزيد.

تساعدك المجتمعات على طرح الأسئلة والإجابة عليها، وتقديم الملاحظات، وسماعها من الخبراء ذوي الاطلاع الواسع.